Specific approach for membrane fouling control and better treatment performance of an anaerobic submerged membrane bioreactor

Optimization of membrane filtration and cleaning strategy in a high solid thermophilic AnMBR treating food waste

Anaerobic membrane bioreactor is advantageous over traditional processes for food waste treatment, i.e. short retention time, high loading rate, and particulate clean permeate. However, establishing a sustainable membrane filtration is a long-standing challenge because of its high viscosity and solids concentration characteristics. Therefore, this study investigated the changes in the membrane permeability before and after the cleaning during a 130-day thermophilic anaerobic experiment. Results show that the AnMBR system could maintain high stability even under a short HRT of 10 days and OLR of 9.0 kg-COD/(m3·d) with low volatile fatty acid of 50 mg/L. The membrane filtration deteriorates with the concurrence of a sharp increase of viscosity when the volatile solids reached 23 g/L. A critical flux was achieved at 5.5 L/(m2·h) under optimized operation conditions, membrane filtration/relaxing ratio with less than 4:1 at a hydraulic retention time of 15 d. Membrane fouling can be removed by soaking the membrane in NaClO (1 g/L, 15 h) and citric acid (2 g/L, 2 h). Conclusively, this work provides insight to establish the operation strategy for a thermophilic AnMBR treating food waste.

Biological processes modelling for MBR systems: A review of the state-of-the-art focusing on SMP and EPS

A mathematical correlation between biomass kinetic and membrane fouling can improve the understanding and spread of Membrane Bioreactor (MBR) technology, especially in solving the membrane fouling issues. On this behalf, this paper, produced by the International Water Association (IWA) Task Group on Membrane modelling and control, reviews the current state-of-the-art regarding the modelling of kinetic processes of biomass, focusing on modelling production and utilization of soluble microbial products (SMP) and extracellular polymeric substances (EPS). The key findings of this work show that the new conceptual approaches focus on the role of different bacterial groups in the formation and degradation of SMP/EPS. Even though several studies have been published regarding SMP modelling, there still needs to be more information due to the highly complicated SMP nature to facilitate the accurate modelling of membrane fouling. The EPS group has seldom been addressed in the literature, probably due to the knowledge deficiency concerning the triggers for production and degradation pathways in MBR systems, which require further efforts. Finally, the successful model applications showed that proper estimation of SMP and EPS by modelling approaches could optimise membrane fouling, which can influence the MBR energy consumption, operating costs, and greenhouse gas emissions.

Anaerobic membrane bioreactors for pharmaceutical-laden wastewater treatment: A critical review

Pharmaceuticalsare a diverse group of chemical compounds widely used for prevention and treatment of infectious diseases in both humans and animals. Pharmaceuticals, either in their original or metabolite form, find way into the wastewater treatment plants (WWTPs) from different sources. Recently, anaerobic membrane bioreactors (AnMBR) has received significant research attention for the treatment of pharmaceuticals in various wastewater streams. This review critically examines the behaviour and removal of a wide array of pharmaceuticals in AnMBR with primary focus on their removal efficiencies and mechanisms, critical influencing factors, and the microbial community structures. Subsequently, the inhibitory effects of pharmaceuticals on the performance of AnMBR and membrane fouling are critically discussed. Furthermore, the imperative role of membrane biofouling layer and its components in pharmaceuticals removal is highlighted. Finally, recent advancements in AnMBR configurations for membrane fouling control and enhanced pharmaceuticals removal are systemically discussed.

Mitigating membrane fouling in a high solid food waste thermophilic anaerobic membrane bioreactor by incorporating fixed bed bio-carriers

Hybrid anaerobic membrane bioreactor (Hy-AnMBR) was developed by incorporating polyurethane sponge carriers to mitigate membrane fouling. The results showed that the membrane fouling was well controlled in Hy-AnMBR from the aspects of sludge property and membrane filtration performance. The solid concentration, including TS and MLSS in the Hy-AnMBR was reduced after introducing the fixed bed carrier, which was 13% and 20% lower than the control AnMBR (Con-AnMBR), and this resulted in improved filtration performance. The scanning electron microscope (SEM) photograph showed that membrane pores could still be observed on the Hy-AnMBR surface, indicating that the cake layer fouling of the Hy-AnMBR was less than the Con-AnMBR. The increase of the EPS and SMP promoted the acceleration of the membrane fouling rate. Analysis through confocal laser scanning microscopy (CLSM) and membrane cleaning revealed that adding sponge carriers mitigated 3.3%-9% pore-blocking, and the total membrane resistance in the Hy-AnMBR was reduced by 52% compared to the Con-AnMBR. Chemical cleaning was essential for pollutant removal, and membrane permeability recovery was more than 97%.

The Measurement, Application and Effect of Oxygen in Microbial Fermentations: Focusing on Methane and Carboxylate Production

Oxygen is considered detrimental to anaerobic fermentation processes by many practitioners. However, deliberate oxygen sparging has been used successfully for decades to remove H2S in anaerobic digestion (AD) systems. Moreover, microaeration techniques during AD have shown that small doses of oxygen may enhance process performance and promote the in situ degradation of recalcitrant compounds. However, existing oxygen dosing techniques are imprecise, which has led to inconsistent results between studies. At the same time, real-time oxygen fluxes cannot be reliably quantified due to the complexity of most bioreactor systems. Thus, there is a pressing need for robust monitoring and process control in applications where oxygen serves as an operating parameter or an experimental variable. This review summarizes and evaluates the available methodologies for oxygen measurement and dosing as they pertain to anaerobic microbiomes. The historical use of (micro-)aeration in anaerobic digestion and its potential role in other anaerobic fermentation processes are critiqued in detail. This critique also provides insights into the effects of oxygen on these microbiomes. Our assessment suggests that oxygen dosing, when implemented in a controlled and quantifiable manner, could serve as an effective tool for bioprocess engineers to further manipulate anaerobic microbiomes for either bioenergy or biochemical production.

Integrated anaerobic and algal bioreactors: A promising conceptual alternative approach for conventional sewage treatment

Conventional sewage treatment applying activated sludge processes is energy-intensive and requires great financial input, hampering widespread implementation. The introduction of anaerobic membrane bioreactors (AnMBR) followed by an algal reactor growing species of commercial interest, may present an alternative, contributing to the envisaged resource recovery at sewage treatment plants. AnMBRs can be applied for organic matter removal with energy self-sufficiency, provided that effective membrane fouling management is applied. Haematococcus pluvialis, an algal species with commercial value, can be selected for ammonium and phosphate removal. Theoretical analysis showed that good pollutant removal, positive financial output, as well as a significant reduction in the amount of hazardous activated sludge can be achieved by applying the proposed process, showing interesting advantages over current sewage treatment processes. Microbial contamination to H. pluvialis is a challenge, and technologies for preventing the contamination during continuous sewage treatment need to be applied.

Anaerobic membrane bioreactors (AnMBRs) for municipal wastewater treatment- potential benefits, constraints, and future perspectives: An updated review

The application of Anaerobic Membrane Bioreactors (AnMBRs) for municipal wastewater treatment has been made sufficiently sustainable for practical implementations. The potential benefits are significant as AnMBRs effectively remove a broad range of contaminants from wastewater for water reuse, degrade organics in wastewater to yield methane-rich biogas for resultant energy production, and concentrate nutrients for subsequent recovery for fertilizer production. However, there still exist some concerns requiring vigilant considerations to make AnMBRs economically and technically viable. This review paper briefly describes process fundamentals and the basic AnMBR configurations and highlights six major factors which obstruct the way to AnMBRs installations affecting their performance for municipal wastewater treatment: (i) organic strength, (ii) membrane fouling, (iii) salinity build-up, (iv) inhibitory substances, (v) temperature, and (vi) membrane stability. This review also covers the energy utilization and energy potential in AnMBRs aiming energy neutrality or positivity of the systems which entails the requirement to further determine the economics of AnMBRs. The implications and related discussions have also been made on future perspectives of the concurrent challenges being faced in AnMBRs operation.

Anaerobic Membrane Bioreactors for Municipal Wastewater Treatment: A Literature Review

Currently, there is growing scientific interest in the development of more economic, efficient and environmentally friendly municipal wastewater treatment technologies. Laboratory and pilot-scale surveys have revealed that the anaerobic membrane bioreactor (AnMBR) is a promising alternative for municipal wastewater treatment. Anaerobic membrane bioreactor technology combines the advantages of anaerobic processes and membrane technology. Membranes retain colloidal and suspended solids and provide complete solid–liquid separation. The slow-growing anaerobic microorganisms in the bioreactor degrade the soluble organic matter, producing biogas. The low amount of produced sludge and the production of biogas makes AnMBRs favorable over conventional biological treatment technologies. However, the AnMBR is not yet fully mature and challenging issues remain. This work focuses on fundamental aspects of AnMBRs in the treatment of municipal wastewater. The important parameters for AnMBR operation, such as pH, temperature, alkalinity, volatile fatty acids, organic loading rate, hydraulic retention time and solids retention time, are discussed. Moreover, through a comprehensive literature survey of recent applications from 2009 to 2021, the current state of AnMBR technology is assessed and its limitations are highlighted. Finally, the need for further laboratory, pilot- and full-scale research is addressed.

The performance and microbial communities of an anaerobic membrane bioreactor for treating fluctuating 2-chlorophenol wastewater

An anaerobic membrane bioreactor (AnMBR) was used to treat low to high (5-200 mg/L) concentrations of 2-chlorophenol (2-CP) wastewater. The AnMBR achieved high and stable chemical oxygen demand removal and 2-CP removal with an average value of 93.2% and 94.2% under long hydraulic retention times (HRTs, 48-96 h), respectively. 2-CP removal efficiency of 98.6 mg/L/d was achieved with 2-CP concentration of 200 mg/L, which was much higher than that of other anaerobic bioreactors. Furthermore, volatile fatty acids didn't accumulate under high 2-CP loading. Long HRTs significantly reduced the membrane fouling as the fouling rate (0.90 × 10⁹-5.44 × 10⁹ m^-1h^-1) was low. Spirochaetaceae and Methanosaeta were the dominant microbes responsible for dechlorination, methanogenesis, and shock resistance. All these results demonstrate that this AnMBR operated under long HRTs is good and robust for fluctuating chlorophenols wastewater treatment, which has high potential for treating fluctuating refractory organics wastewater with the low membrane fouling rate.

Membrane processes

This literature review provides a review for publications in 2018 and 2019 and includes information membrane processes findings for municipal and industrial applications. This review is a subsection of the annual Water Environment Federation literature review for Treatment Systems section. The following topics are covered in this literature review: industrial wastewater and membrane. Bioreactor (MBR) configuration, membrane fouling, design, reuse, nutrient removal, operation, anaerobic membrane systems, microconstituents removal, membrane technology advances, and modeling. Other sub-sections of the Treatment Systems section that might relate to this literature review include the following: Biological Fixed-Film Systems, Activated Sludge, and Other Aerobic Suspended Culture Processes, Anaerobic Processes, and Water Reclamation and Reuse. This publication might also have related information on membrane processes: Industrial Wastes, Hazardous Wastes, and Fate and Effects of Pollutants.

Anaerobic hybrid membrane bioreactor for treatment of synthetic leachate: Impact of organic loading rate and sludge fractions on membrane fouling

In the present study, the treatment of synthetic landfill leachate was carried out using a lab-scale anaerobic hybrid membrane bioreactor (An-HMBR). The reactor was operated for 250 days at two days of hydraulic retention time (HRT). Average chemical oxygen demand (COD) removal efficiency was ≥ 88% at steady-state conditions at 100% raw leachate. As organic loading rate (OLR) increased from 1.6 to 13.9 Kg COD m^-3 d^-1, flux gradually declined from 70 to 52 L/m² h (LMH) within 250 days. Chemical membrane cleaning enhanced the flux up to 75% of the initial flux at the final stage of the reactor. Reversible fouling (>90%) dominated over irreversible fouling (<8%). Membrane fouling was mainly caused by extracellular polymeric substances (EPS) fraction, which resulted in cake layer formation on the ceramic membrane used in the An-HMBR system. Membrane resistance increased with variables in the following order OLR > MLSS (mixed liquor suspended solids) > EPS > SMP (soluble microbial products). A nonlinear regression model developed for prediction of membrane resistance at different OLR can predict with an error of ±7%.

Enhancement of sustainable flux by optimizing filtration mode of a high-solid anaerobic membrane bioreactor during long-term continuous treatment of food waste

Membrane fouling or flux limitation is the major bottleneck that hinders anaerobic membrane bioreactor (AnMBR) application. An AnMBR with a working volume of 15 L was operated for 180 days to investigate the maximum sustainable flux at different high solid concentrations during the anaerobic treatment of food waste. A total of eight filtration-to-relaxation (F/R) ratios were incorporated, with a fixed filtration time of 3 min and varied relaxation times (decreased from 12 to 1 min). Besides, a total of five instantaneous fluxes were applied: 12, 14, 16, 18 and 20 L/m²/h (LMH). Results showed that sustainable flux was greatly enhanced by filtration mode optimization. The optimal F/R ratios were 3:1, 3:1, 3:1 and 3:6 at mixed liquor total solid (MLTS) concentrations of 10, 15, 20 and 25 g/L, respectively. The corresponding sustainable flux values were 13.2 ± 0.3, 10.1 ± 0.4, 9.3 ± 0.2 and 4.0 ± 0.3 LMH, respectively. These values were 29%, 35%, 52% and 21% higher than the critical flux determined by the flux-stepping technique. The results of this study were used to perform a mathematical simulation. The obtained regression equation between the maximum sustainable flux and MLTS concentration can be used to predict the sustainable flux at other MLTS concentrations. This work provides valuable insight into the design and operation of high-solid AnMBRs, and is expected to contribute to further advances in the application of AnMBRs in industry.