Zirconium based metal-organic framework in-situ assisted hydrothermal pretreatment and enzymatic hydrolysis of Platanus X acerifolia exfoliating bark for bioethanol production

Chromium-based metal-organic framework, MIL-101 (Cr), assisted hydrothermal pretreatment of teff (Eragrostis tef) straw biomass

Teff (Eragrostis tef) is a staple crop and holds the biggest share of grains cultivated area in Ethiopia, consequently, a large quantity of Teff straw is produced. The Teff straw was pretreated for the first time with Chromium-based Metal-Organic Framework, MIL-101(Cr), assisted hydrothermal method at temperatures ranging from 160 to 240 °C for 1/2, 1, or 2 h time independently. With an increase of pretreatment severity, the yield of total reducing sugar (TRS) was increased until reaching maximum (185 mg g-1). The identified optimum hydrothermal pretreatment condition, (180 °C and 1 h), had a feature of higher TRS yield and lower furfural concentration. The morphological analysis showed that treated Teff straw had degraded structure, higher surface area, and distorted bundles than native Teff straws. This study insight into MOFs' application in lignocellulose biomass processing, and optimizing the pretreatment condition of Teff straw biomass.

Development of a novel magnetic metal-organic framework for the immobilization of short-chain dehydrogenase for the asymmetric reduction of pro-chiral ketone

Short-chain dehydrogenase/reductase (SDR) acts as a biocatalyst in the synthesis of chiral alcohols with high optical purity. Herein, we achieved immobilization via crosslinking on novel magnetic metal-organic framework nanoparticles with a three-layer shell structure (Fe3O4@PDA@Cu (PABA)). The results of scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and energy dispersive X-ray spectroscopy confirmed the morphology and cross-linking property of immobilized SDR, which was more durable, stable, and reusable and exhibited better kinetic performance than free enzyme. The SDR and glucose dehydrogenase (GDH) were co-immobilized and then used for the asymmetric reduction of COBE and ethyl 2-oxo-4-phenylbutanoate (OPBE). These finding suggest that enzymes immobilized on novel MOF nanoparticles can serve as promising biocatalysts for asymmetric reduction prochiral ketones into chiral alcohols.

A Cleaner Delignification of Urban Leaf Waste Biomass for Bioethanol Production, Optimised by Experimental Design

This work is focused on optimising a low-temperature delignification as holocellulose purification pretreatment of Platanus acerifolia leaf waste for second-bioethanol production. Delignification was accomplished by acid-oxidative digestion using green reagents: acetic acid and 30% hydrogen peroxide 1:1. The effect of reaction time (30–90 min), temperature (60–90 °C), and solid loading (5–15 g solid/20 g liquid) on delignification and solid fraction yield were studied. The process parameters were optimised using the Box–Behnken experimental design. The highest attained lignin removal efficiency was larger than 80%. The optimised conditions of delignification, while maximising holocellulose yield, pointed to using the minimum temperature of the examined range. Analysis of variance on the solid fraction yield and the lignin removal suggested a linear model with a negative influence of the temperature on the yield. Furthermore, a negative effect of the solid loading and low effect of temperature and time was found on the degree of delignification. Then the temperature range was extended back to 60 °C, providing 71% holocellulose yield and 70% while improving energy efficiency by working at a lower temperature. Successful lignin removal was confirmed using confocal laser scanning microscopy. As evaluated by scanning electron microscopy, the solid structure presented an increased exposition of the cellulose fibre structure.

A hybrid nanobiocatalyst with in situ encapsulated enzyme and exsolved Co nanoclusters for complete chemoenzymatic conversion of methyl parathion to 4-aminophenol

Combination of enzymatic and chemical reactions provides tremendous possibilities for chemoenzymatic cascade processes. However, constructing efficient hybrid catalysts still faces great challenges. Herein, we develop a hybrid catalyst by in situ encapsulating organophosphorus hydrolase (OPH) into a Zn-doped Co-based ZIF (0.8CoZIF) via biomimetic mineralization for the chemoenzymatic cascade conversion of methyl parathion to 4-nitrophenol and then 4-aminophenol. The exsolved Co nanoclusters in Zn/Co-ZIF are found to catalyze 4-nitrophenol reduction into 4-aminophenol in the presence of sodium borohydride (NaBH₄). The as-synthesized OPH@0.8CoZIF catalyzes the complete conversion of 95 μM methyl parathion at nearly 100% 4-aminophenol production in the presence of 50 mM NaBH₄ within 15 min, which is 1/4 that of the physical mixture of OPH and 0.8CoZIF, benefiting from the MP accumulation and substrate channeling in the hybrid catalyst. The maximum cascade conversion rate of MP to 4-AP reaches 8.07 μmol·min^-1·g-catalyst^-1, which is higher than most of the reported chemoenzymatic cascade catalysts. Therefore, the hybrid nanocatalyst containing Co-ZIF-based catalyst and OPH is successfully fabricated and enables to catalyze the complete conversion of a toxic pollutant like methyl parathion into a non-toxic resource like 4-aminophenol for recycling in useful chemical synthesis through efficient one-pot cascade reactions.

Immobilization of alpha-L-rhamnosidase on a magnetic metal-organic framework to effectively improve its reusability in the hydrolysis of rutin

α-L-Rhamnosidase (Rha) is a biotechnologically important enzyme that degrades biomass containing natural rhamnoside. Herein, the recombinant Rha was successfully immobilized on magnetic metal-organic frameworks (MOFs), and used to hydrolyze rutin. Magnetic MOFs were constructed by binding Cu²⁺ and PABA to the surface of Fe₃O₄ nanoparticles coated with a polydopamine film through coordinate covalent bonds, and the enzyme was attached to the MOFs using the cross-linking agents EDC/NHS. The immobilized enzyme Rha@MOF reached an activity of 25.09 U/g with a lower apparent K_m value compared with the free enzyme. The conversion rate of 20 g/L rutin was 91.42%, corresponding to an isoquercitrin productivity of 12.78 g/L/h. Rha@MOF also exhibited significantly improved reusability; the conversion rate was still 73.55% after 30 cycles at 60 °C. These results indicated that the magnetic MOF-immobilized enzyme was a feasible biocatalyst for the conversion of flavonoids with low aqueous solubility.

Antibacterial application and toxicity of metal-organic frameworks

Metal-organic frameworks (MOFs), which are also referred to as coordination polymers, have been widely used in adsorption separation and catalysis, especially in the field of physical chemistry in the past few years, because of their unique physical structure and potential chemical properties. In recent years, particularly with the continuous expansion of the research field, deepening of research levels, and sustained advancements in science and technology, powerful and diverse MOFs that have demonstrated great biomedical application potential have been successively developed. Consequently, this study summarizes the origin, development, and common synthesis methods of MOFs, with major emphasis on their antibacterial application and safety evaluation in biomedicine.

Porous Zr-Based Metal-Organic Frameworks (Zr-MOFs)-Incorporated Thin-Film Nanocomposite Membrane toward Enhanced Desalination Performance

Four different thin-film nanocomposite (TFN) membranes were prepared by adding different concentrations of porous Zr-metal-organic frameworks (MOFs) (UiO-66 and UiO-66-NH₂) to piperazine aqueous solution (aqueous phase) or 1,3,5-benzenetricarbonyl trichloride-n-hexane solution (organic phase) by interfacial polymerization. The main purpose is to study the specific effects of different addition methods and addition amounts of nanoparticles on the structure and performance of the TFN membranes by interfacial polymerization. All four TFN membranes exhibited a higher water permeability while maintaining high salt rejection compared to thin-film composite membrane. On the one hand, the TFN membranes behave differently, which are prepared by adding the same kind of nanoparticles to the aqueous phase or organic phase, respectively. The TFN membrane prepared by adding 0.2 w/v% UiO-66 to the organic phase had a high water flux of 87.86 L m^-2 h^-1, compared to 46.31 L m^-2 h^-1 of the membrane prepared by adding 0.3 w/v% UiO-66 in the aqueous phase. This is due to the fact that UiO-66 greatly slows the interfacial polymerization rate when UiO-66 is added to the organic phase, resulting in a thinner and wider-aperture polyamide thin-film layer, reducing the water transmission resistance during filtration. Therefore, it is more economical by adding nanoparticles to organic phase than aqueous phase under the same filtering effect. On the other hand, different nanoparticles can also cause differences in performance and structure of the TFN membranes even in the same preparation manner. TFN membrane with UiO-66-NH₂ in the aqueous phase has higher water permeance than the one with UiO-66 in the aqueous phase, owing to the good hydrophilicity of the amino group, which improves the water dispersibility of UiO-66-NH₂ so that the TFN membrane is more uniform. In addition, UiO-66-NH₂ slows down the process of interface polymerization, making the membrane more porous. The monomers in the aqueous phase and organic phase can be adsorbed in the pores of Zr-MOFs, which makes the interfacial polymerization occur both in the pores and on the surface of the pores. Thus, the compatibility between the polyamide and MOFs was enhanced and less defects were formed in the thin-film layer, resulting in a high salt rejection even when the concentration of Zr-MOFs increased. This is the first time to explain that polyamide membrane has not obvious salt rejection attenuation with increasing porous material content using pore adsorption reaction monomer principle. Also, the Zr-MOFs-based TFN membrane exhibited good heat resistance and antifouling property. This work shows that porous Zr-MOFs nanomaterials have significant advantages in the development of nanofiltration membranes with high water flux and rejection.

Pretreatment of lignocellulosic feedstock to produce fermentable sugars for poly(3-hydroxybutyrate-co-3-hydroxyvalerate) production using activated sludge

The goal of this research was to release fermentable reducing sugar from lignocellulose (poplar) by hot water pretreatment, and then employed to synthesize poly(3-hydroxybutyrate-co-3-hydroxy-valerate) (PHBV) using activated sludge to replace traditional petroleum-based polymers. The orthogonal experiment was used to optimize the conditions of different pretreatment temperature, pretreatment time, enzymatic hydrolysis temperature and enzymatic hydrolysis time and the optimal condition for producing sugars was pretreated at 200 °C for 30 min and enzymatic hydrolysis at 45 °C for 3d. A maximum yield was 530.3 mg/g of reduced sugar, while the furfural and 5-HMF produced in the optimum conditions were 512.61 mg/L and 239.34 mg/L. Moreover, the effects of increasing concentration of hot water pretreated poplar hydrolysates (500-1700 mg/L) on PHBV production were investigated. Poplar hydrolysate (1700 mg/L) exhibited maximum PHBV concentration of 637.556 mg/L.

Synthesis, structure, fluorescence and electrochemical properties of a new Zn(ii)–organic framework constructed by a tricarboxylic acid ligand

A new efficient fluorescent sensor [Zn₃(L)(HL)(OH)(H₂O)₃]·H₂O (1) for detecting Cr₂O₇²⁻ anions has been synthesized. Moreover, compound 1 has been calcined to prepare a new electrocatalyst R-C@800 for HER.