Comparative study about the performance of three types of modified natural treatment systems for rice noodle wastewater

Performance evaluation of modified Living Wall garden for treating septic tank effluent

The Living Wall (LW) garden system has been employed as a post-treatment system to improve the effluent quality of septic tanks. This improvement primarily involves reducing nutrient levels, as well as facilitating the removal of organic matter and solids in accordance with effluent discharge guidelines. The objective of this study was to investigate the treatment performance of the LW system connected to a septic tank, along with an examination of the microbial communities within the LW units. A laboratory-scale LW system, comprising LW1, LW2, and LW3 units, was employed. The system was fed with effluent obtained from septic tanks and varied by theoretical hydraulic retention time (HRT) of 6, 12, and 24 h. The TCOD, SCOD, TSS, TVS, TKN, and TP removal efficiencies of the LWs were achieved at 62 ± 24, 42 ± 19, 72 ± 21, 66 ± 15, 80 ± 15, and 58 ± 21%, respectively. To classify microbial communities in the soil and gravels collected from each LW unit, the Illumina MiSeq System Sequencer was employed. Nitrospirota was consistently found in all LW units, aiding in the conversion of nitrogen. Fusobacteriota were detected in specific layers of the LW units, indicating varying oxygen levels in the LW system.

Meta-analysis review for pilot and large-scale constructed wetlands: Design parameters, treatment performance, and influencing factors

Despite their longstanding use in environmental remediation, constructed wetlands (CWs) are still topical due to their sustainable and nature-based approach. While research and review publications have grown annually by 7.5 % and 37.6 %, respectively, from 2018 to 2022, a quantitative meta-analysis employing advanced statistics and machine learning to assess CWs has not yet been conducted. Further, traditional statistics of mean ± standard deviation could not convey the extent of confidence or uncertainty in results from CW studies. This study employed a 95 % bootstrap-based confidence interval and out-of-bag Random Forest-based driver analysis on data from 55 studies, totaling 163 cases of pilot and full-scale CWs. The study recommends, with 95 % confidence, median surface hydraulic loading rates (HLR) of 0.14 [0.11, 0.17] m/d for vertical flow-CWs (VF) and 0.13 [0.07, 0.22] m/d for horizontal flow-CWs (HF), and hydraulic retention time (HRT) of 125.14 [48.0, 189.6] h for VF, 72.00 [42.00, 86.28] h for HF, as practical for new CW design. Permutation importance results indicate influent COD impacted primarily on COD removal rate at 21.58 %, followed by HLR (16.03 %), HRT (12.12 %), and substrate height (H) (10.90 %). For TN treatment, influent TN and COD were the most significant contributors at 12.89 % and 10.01 %, respectively, while H (9.76 %), HRT (9.72 %), and HLR (5.87 %) had lower impacts. Surprisingly, while HRT and H had a limited effect on COD removal, they substantially influenced TN. This study sheds light on CWs' performance, design, and control factors, guiding their operation and optimization.

Microplastic-Assisted Removal of Phosphorus and Ammonium Using Date Palm Waste Derived Biochar

Microplastics (MPs) are emerging environmental pollutants worldwide, posing potential health risks. Moreover, MPs may act as vectors for other contaminants and affect their fate, transport, and deposition in the environment. Therefore, efficient and economical techniques are needed for the removal of contemporary MPs and contaminants from the environment. The present research study investigated the sorption of phosphorus (P) and ammonium (NH4+) onto date palm waste-derived biochar (BC) from an aqueous solution in the presence of polyamide (PA) and polyethylene (PE) MPs. The BC was prepared at 600 °C, characterized for physio-chemical properties, and applied for P and NH4+ removal via isotherm and kinetic sorption trials. The results of the sorption trials demonstrated the highest removal of NH4+ and P was obtained at neutral pH 7. The highest P sorption (93.23 mg g-1) by BC was recorded in the presence of PA, while the highest NH4+ sorption (103.76 mg g-1) was found with co-occurring PE in an aqueous solution. Sorption isotherm and kinetics models revealed that P and NH4+ removal by MP-amended BC followed chemisorption, electrostatic interaction, precipitation, diffusion, and ion exchange mechanisms. Overall, co-existing PA enhanced the removal of P and NH4+ by 66% and 7.7%, respectively, while co-existing PE increased the removal of P and NH4+ by 55% and 30%, respectively, through the tested BC. Our findings suggested that converting date palm waste into BC could be used as a competent and economical approach to removing P and NH4+ from contaminated water. Furthermore, microplastics such as PE and PA could assist in the removal of P and NH4+ from contaminated water using BC.

Systematically assess the advancing and limiting factors of using the multi-soil-layering system for treating rural sewage in China: From the economic, social, and environmental perspectives

Solving the problem of rural sewage is considered an essential task in China's rural revitalization strategy. Based on the yearbook data of sewage treatment in rural areas between 2014 and 2019, although the rate of sewage treatment in rural areas of China showed an upward trend, it was still below 35%, mainly due to the lack of suitable sewage treatment technologies. Here, we discuss the multi-soil-layering (MSL) system, which is an emerging technology suitable for rural sewage treatment. It was deemed to overcome the shortcomings of current biological and ecological treatment technologies, such as complex operation, large area, and high operating costs. We used system dynamics to evaluate the advancing and limiting factors of MSL application for rural sewage treatment from the social, environmental, and economic dimensions. The results illustrated a complete causal loop diagram in which essential variables and relationships were concentrated in the technology, operation and maintenance, and satisfaction of farmers. The efficiency of MSL is the key variable affecting the final decision of the MSL application. Overall, using MSL to treat rural sewage could be an option to improve the rural environment in China. However, the scientific technological model for MSL should be further explored. This review provides guidance on how to promote MSL systems in rural areas.

The Historical Development of Constructed Wetlands for Wastewater Treatment

Constructed wetlands (CWs) for wastewater treatment are engineered systems that are designed and operated in order to use all natural processes involved in the removal of pollutants from wastewaters. CWs are designed to take advantage of many of the same processes that occur in natural wetlands, but do so within a more controlled environment. The basic classification is based on the presence/absence of wastewater on the wetland surface. The subsurface flow of CWs can be classified according to the direction of the flow to horizontal and vertical. The combination of various types of CWs is called hybrid CW. The CWs technology began in the 1950s in Germany, but the major extension across the world occurred during the 1990s and early 2000s. The early CWs in Germany were designed as hybrid CWs; however, during the 1970s and 1980s, horizontal subsurface flow CWs were mostly designed. The stricter limits for nitrogen, and especially ammonia, applied in Europe during the 1990s, brought more attention to vertical subsurface flow and hybrid systems. Constructed wetlands have been used to treat various types of wastewater, including sewage, industrial and agricultural wastewaters, various drainage and runoff waters and landfill leachate. Recently, more attention has also been paid to constructed treatment wetlands as part of a circular economy in the urban environments: it is clear that CWs are a good fit for the new concept of sponge cities.

Performance of novel constructed wetlands for treating solar septic tank effluent

To improve treatment performance of the solar septic tank technology, novel constructed wetland systems have been proposed as an effective post-treatment system. This study aimed to investigate the treatment performance of the multi-soil layer based constructed wetland (MSL-CW) and comparing with the modified constructed wetland (mCW) for treating solar septic tank effluent in long-term operation. Pilot-scale MSL-CW and mCW units were operated in parallel under the same conditions during the period of 2016-2019. Removal efficiencies of TCOD, SCOD and TBOD in the MSL-CW were not significantly different (p < 0.05) from those of the mCW unit, which were 70-72%, 63-68% and 78-82%, respectively. The removal efficiencies of TSS, TKN, NH₄-N and TP were found in the same magnitude in both units. The total coliform and E.coli counts in the effluent of MSL-CW and mCW units were reduced from 10⁵ MPN/100 mL to be lower than 10³ MPN/100 mL. These long-term operational results demonstrated that the effluent from the MSL-CW and mCW units could meet the global standards of non-sewered sanitation systems and the WHO guidelines. The effects of seasonal variations and plant harvesting on the monthly treatment performance are discussed in this study.

Combined biochar vertical flow and free-water surface constructed wetland system for dormitory sewage treatment and reuse

A two-stage treatment system that included vertical flow (VF) and free-water surface (FWS) constructed wetlands was investigated for the dual purposes of sewage treatment and reuse. The VF included four layers (biochar, sand, gravel, and sandy soil), and the FWS was installed after the VF and used as a polishing tank. Two types of local plants, namely Colocasia esculenta and Canna indica, were planted in the VF and FWS, respectively. The system operated for approximately six months, and the experimental period was categorized into four stages that corresponded to changes in the hydraulic loading rate (HLR) (0.02-0.12 m/d). The removal efficiencies for total suspended solids (TSS), chemical oxygen demand (COD), biological oxygen demand (BOD₅), ammonia (NH₄-N), and total coliform (Tcol) were 71 ± 11%, 73 ± 13%, 79 ± 11%, 91 ± 3%, and 70 ± 20%, respectively. At HLRs of 0.04-0.06 m/d, the COD and BOD₅ levels satisfied Vietnam's irrigation standards, with removable rates of 64% and 88%, respectively, and the TSS and Tcol levels satisfied Vietnam's standards for potable water. Furthermore, the NO₃-N levels satisfied the reuse limits, whereas the NH₄-N levels exceeded the reuse standards. At high HLRs (e.g., 0.12 m/d), all the effluent parameters, except Tcol and NO₃-N, exceeded the standards.