Evaluation of hydrogen yield potential from Chlorella by photo-fermentation under diverse substrate concentration and enzyme loading

Microalgae to bioenergy production: Recent advances, influencing parameters, utilization of wastewater - A critical review

Fossil fuel limitations and their influence on climate change through atmospheric greenhouse gas emissions have made the excessive use of fossil fuels widely recognized as unsustainable. The high lipid content, carbon-neutral nature and potential as a biofuel source have made microalgae a subject of global study. Microalgae are a promising supply of biomass for third-generation biofuels production since they are renewable. They have the potential to produce significant amounts of biofuel and are considered a sustainable alternative to non-renewable energy sources. Microalgae are currently incapable to synthesize algal biofuel on an extensive basis in a sustainable manner, despite their significance in the global production of biofuels. Wastewater contains nutrients (both organic and inorganic) which is essential for the development of microalgae. Microalgae and wastewater can be combined to remediate waste effectively. Wastewater of various kinds such as industrial, agricultural, domestic, and municipal can be used as a substrate for microalgal growth. This process helps reduce carbon dioxide emissions and makes the production of biofuels more cost-effective. This critical review provides a detailed analysis of the utilization of wastewater as a growth medium for microalgal - biofuel production. The review also highlights potential future strategies to improve the commercial production of biofuels from microalgae.

Sustainable hydrogen production via microalgae: Technological advancements, economic indicators, environmental aspects, challenges, and policy implications

Hydrogen has emerged as an alternative energy source to meet the increasing global energy demand, depleting fossil fuels and environmental issues resulting from fossil fuel consumption. Microalgae-based biomass is gaining attention as a potential source of hydrogen production due to its green energy carrier properties, high energy content, and carbon-free combustion. This review examines the hydrogen production process from microalgae, including the microalgae cultivation technological process for biomass production, and the three main routes of biomass-to-hydrogen production: thermochemical conversion, photo biological conversion, and electrochemical conversion. The current progress of technological options in the three main routes is presented, with the various strains of microalgae and operating conditions of the processes. Furthermore, the economic and environmental perspectives of biomass-to-hydrogen from microalgae are evaluated, and critical operational parameters are used to assess the feasibility of scaling up biohydrogen production for commercial industrial-scale applications. The key finding is the thermochemical conversion process is the most feasible process for biohydrogen production, compared to the pyrolysis process. In the photobiological and electrochemical process, pure hydrogen can be achieved, but further process development is required to enhance the production yield. In addition, the high production cost is the main challenge in biohydrogen production. The cost of biohydrogen production for direct bio photolysis it cost around $7.24 kg-1; for indirect bio photolysis it costs around $7.54 kg-1 and for fermentation, it costs around $7.61 kg-1. Therefore, comprehensive studies and efforts are required to make biohydrogen production from microalgae applications more economical in the future.

Influence of titanate photocatalyst in biohydrogen yield via photo fermentation from corn stover

The effects of three common titanate photocatalysts (TPC) on the photo fermentation biohydrogen production (PFHP) from corn stover were studied in this paper. Compared with CaTiO3 and BaTiO3, the experimental group with the addition of MgTiO3 showed stronger potential for PFHP, the maximum hydrogen yield of 344 mL (68.8 mL/g TS) was obtained at 3 g/L MgTiO3, increased by 48.3%. For CaTiO3, BaTiO3, the optimal amount of addition was 8 and 7 g/L, respectively, in which, the hydrogen yield was 308 and 288 mL (61.6 and 57.6 mL/g TS). TPC addition could shorten the delay period of hydrogen production lower the Oxidation-Reduction Potential (ORP) of fermentation broth, especially MgTiO3 addition, the delayed hydrogen production could be shortened by 33.2% compared with control group, and the ORP could reach the lowest value of -371 mV.

Genetic engineering for biohydrogen production from microalgae

The development of biohydrogen as an alternative energy source has had great economic and environmental benefits. Hydrogen production from microalgae is considered a clean and sustainable energy production method that can both alleviate fuel shortages and recycle waste. Although algal hydrogen production has low energy consumption and requires only simple pretreatment, it has not been commercialized because of low product yields. To increase microalgal biohydrogen production several technologies have been developed, although they struggle with the oxygen sensitivity of the hydrogenases responsible for hydrogen production and the complexity of the metabolic network. In this review, several genetic and metabolic engineering studies on enhancing microalgal biohydrogen production are discussed, and the economic feasibility and future direction of microalgal biohydrogen commercialization are also proposed.

Enhancement on photobiological hydrogen production from corn stalk via reducing hydrogen pressure in bioreactors by way of phased decompression schemes

In this project, it was verified that properly reducing the bioreactor hydrogen partial pressure (HPP) could significantly enhance the photo-fermentative hydrogen production (PFHP) by corn stalk. The maximal cumulative hydrogen yield (CHY) of 82.37 mL/g was obtained under full decompression to 0.4 bar, which was 35% higher than that without decompression. To increase CHY and save the pressure control cost, 12-hour, 24-hour and 36-hour decompression schemes were provided, and the optimal decompression phase in fermentation under each scheme was investigated. The 12-hour decompression scheme was suitable for 24-36 h of fermentation; the 24-hour decompression scheme implemented within 12-36 h of fermentation had a more desirable CHY; when adopting the 36-hour decompression scheme, operation during 12-48 h yielded a CHY of 81.70 mL/g that approximated whole process decompression. The strategies of decompression at the appropriate phase of fermentation were innovative, which offered a new option for optimizing PFHP economically.

Stimulating Anaerobic Degradation of Butyrate via Syntrophomonas wolfei and Geobacter sulfurreducens: Characteristics and Mechanism

Anaerobic digestion (AD) has been widely applied for the degradation of organic wastewater due to its advantages of high-load operation and energy recovery. However, some challenges, such as low treatment capacity and instability caused by the accumulation of volatile fatty acids, limit its further application. Here, S. wolfei and G. sulfurreducens were initially co-cultured in the anaerobic anode of bio-electrochemical system for degrading butyric acid. Butyrate degradation characteristics in different conditions were quantitatively described. Moreover, G. sulfurreducens simultaneously strengthened the consumption of H₂ and acetic acid via direct interspecies electron transfer, thereby strengthening the degradation of butyric acid via a co-metabolic process. During butyrate degradation, the co-culture of S. wolfei and G. sulfurreducens showed more advantages than that of S. wolfei and methanogens. This present study provides a new perspective of butyrate metabolism, which was independent of methanogens in an AD process.

Enhancing biohydrogen yield from corn stover by photo fermentation via adjusting photobioreactor headspace pressure

In this study, the effect of bioreactor headspace pressure regulation on photo-fermentative hydrogen production (PFHP) from corn stover (CS) was investigated. The results showed that the headspace pressure could significantly affect the performance of PFHP. With the decrease in the reactor headspace pressure (100 kPa-10 kPa), cumulative biohydrogen production firstincreased and then decreased, the maximum hydrogen yield of 546.57 mL was obtained at the headspace pressure of 30 kPa. The parameters of Gompertz model showed a lower hydrogen partial pressure was beneficial to speed up the reaction process and shorten the hydrogen production delay time of the system, however, too low pressure would inhibit the metabolism of microorganisms in the PFHP process, resulting lower hydrogen yield obtained.

Role of microalgae in achieving sustainable development goals and circular economy

In 2015, the United Nations General Assembly (UNGA) set out 17 Sustainable Development Goals (SDGs) to be achieved by 2030. These goals highlight key objectives that must be addressed. Each target focuses on a unique perspective crucial to meeting these goals. Social, political, and economic issues are addressed to comprehensively review the main issues combating climate change and creating sustainable and environmentally friendly industries, jobs, and communities. Several mechanisms that involve judicious use of biological entities are among instruments that are being explored to achieve the targets of SDGs. Microalgae have an increasing interest in various sectors, including; renewable energy, food, environmental management, water purification, and the production of chemicals such as biofertilizers, cosmetics, and healthcare products. The significance of microalgae also arises from their tendency to consume CO2, which is the main greenhouse gas and the major contributor to the climate change. This work discusses the roles of microalgae in achieving the various SDGs. Moreover, this work elaborates on the contribution of microalgae to the circular economy. It was found that the microalgae contribute to all the 17th SDGs, where they directly contribute to 9th of the SDGs and indirectly contribute to the rest. The major contribution of the Microalgae is clear in SDG-6 "Clean water and sanitation", SDG-7 "Affordable and clean energy", and SDG-13 "Climate action". Furthermore, it was found that Microalgae have a significant contribution to the circular economy.

A review on the sustainable procurement of microalgal biomass from wastewaters for the production of biofuels

The feasibility of microalgal biomass as one of the most promising and renewable sources for the production of biofuels is being studied extensively. Microalgal biomass can be cultivated under photoautotrophic, heterotrophic, photoheterotrophic, and mixotrophic cultivation conditions. Photoautotrophic cultivation is the most common way of microalgal biomass production. Under mixotrophic cultivation, microalgae can utilize both organic carbon and CO2 simultaneously. Mixotrophic cultivation depicts higher biomass productivity as compared to photoautotrophic cultivation. It is evident from the literature that mixotrophic cultivation yields higher quantities of polyunsaturated fatty acids as compared to that photoautotrophic cultivation. In this context, for economical biomass production, the organic carbon of industrial wastewaters can be valorized for the mixotrophic cultivation of microalgae. Following the way, contaminants' load of wastewaters can be reduced while concomitantly producing highly productive microalgal biomass. This review focuses on different aspects covering the sustainable cultivation of different microalgal species in different types of wastewaters.

Sustainable production of biohydrogen from algae biomass: Critical review on pretreatment methods, mechanism and challenges

The production of chemicals and energy from sustainable biomass with an important objective decreasing carbon impressions has recently become one of the key areas of attention. Algae biomass have been recognized and researched as a potential renewable biomass of biohydrogen production attributed to their limited multiplying time, fast growing qualities and ability of lipid accumulation. This review additionally envelops various key perspectives such as composition and properties of algae biomass and pretreatment strategies such as physical, chemical and biological methods adopted for the algae biomass. This review is mainly focused on pretreatment strategies which have been developed to enhance biohydrogen production. The present review deals with methods and mechanism, enzymes involved and factors influencing on biohydrogen production which help to grasp various bottlenecks, challenges and constraints. Finally, the significant progressions and economical perspective on improving biohydrogen yield because of the expansion of co-substrates and the current trends are examined.

Research progress of additives in photobiological hydrogen production system to enhance biohydrogen

Photosynthetic biohydrogen has the advantages of extensive raw materials, clean and renewable, etc. But, its low substrate utilization rate limit its commercial application. It is reported that the use of additives in the process of biohydrogen by photofermentation is beneficial to increase biohydrogen. However, in practical application, the mechanism of additives in hydrogen production is not understood. This paper, the promotion effect of some additives on biohydrogen by photofermentation was reviewed. Whatever, the existing problems and development trends of various additives are also discussed. It is necessary to select appropriate additives according to the hydrogen-producing characteristics. The use of composite additives may further enhance biohydrogen, but the specific situation needs further exploration. The research results of this paper can help readers to further understand the role of additives in the crouse of photofermentative biohydrogen, provide reference for the research of photofermentative biohydrogen.

Bioproducts from microalgae biomass: Technology, sustainability, challenges and opportunities

Microalgae are a potential feedstock for several bioproducts, mainly from its primary and secondary metabolites. Lipids can be converted in high-value polyunsaturated fatty acids (PUFA) such as omega-3, carbohydrates are potential biohydrogen (bioH₂) sources, proteins can be converted into biopolymers (such as bioplastics) and pigments can achieve high concentrations of valuable carotenoids. This work comprehends the current practices for the production of such products from microalgae biomass, with insights on technical performance, environmental and economical sustainability. For each bioproduct, discussion includes insights on bioprocesses, productivity, commercialization, environmental impacts and major challenges. Opportunities for future research, such as wastewater cultivation, arise as environmentally attractive alternatives for sustainable production with high potential for resource recovery and valorization. Still, microalgae biotechnology stands out as an attractive topic for it research and market potential.

Variations of nitrogen-metabolizing enzyme activity and microbial community under typical loading conditions in full-scale leachate anoxic/aerobic system

Influent loading determines the performance of leachate treatment plant (LTP) facing the dynamic conditions, but enzyme expression in microbial community is unclear. Here, six nitrogen-metabolizing enzymes were detected during nitrification failures (NF), high loading (HL), low loading (LL), and low carbon/nitrogen (LCN) in a 500 m³/d LTP. Nitrogen removal in LL was 15 ± 5% higher than that in HL. The activity of hydroxylamine oxidoreductase decreased by 90% as the influent total nitrogen increased from 2450 mg/L to 3100 mg/L, which might be a critical enzyme causing the nitrification failure. Denitrifying enzyme abated by 1.3% as the carbon/nitrogen dropped by 1% in LCN. With the influent chemical oxygen demand decreased from 22000 mg/L to 12000 mg/L, the relative abundance of norank_f_Saprospiraceae dropped from 33.66% to 11.94%, and finally disappeared, which seems to be an indicator of the high load operation. These findings provide the basis for improving the efficiency of LTPs.

Effects of enzymatic hydrolysis and alkalization pretreatment on biohydrogen production by chlorella photosynthesis

The effects of alkalization pretreatment and enzymolysis on biohydrogen production with Chlorella vulgaris microalgae biomass by photosynthesis were studied, the alkalization pretreatment enzymolysis was to alkalize biomass raw materials before enzymolysis, the biohydrogen production kinetics equation of microalgae biomass was put forward by comparing the biohydrogen process of enzymatic hydrolysis with that of alkaline pretreatment enzymatic hydrolysis. The experimental results show: the optimum initial substrate concentration for biohydrogen production by enzymatic hydrolysis and alkaline pretreatment was 24 g/L, the maximum biohydrogen was 132.1 mL and 294.5 mL, the maximum specific biohydrogen production was 22.0 mL/g and 49.1 mL/g, and the maximum biohydrogen content was 43.9% and 56.8%. The effect of biohydrogen production by enzymatic hydrolysis after alkaline pretreatment of microalgae biomass is obviously better than that by direct enzymatic hydrolysis, which provides scientific reference and development of high efficiency and low cost biohydrogen production technology by photosynthesis of microalgae biomass.

Enhancing photo-fermentation biohydrogen production from corn stalk by iron ion

This study aimed to investigate the enhancement of iron ion on growth, metabolic pathway, and biohydrogen production performance of biohydrogen producing bacteria HAU-M1. Different concentrations of Fe²⁺ and Fe³⁺ were respectively added into fermentation broth of photo-fermentation biohydrogen production (PFHP) from corn stalk. Regular sampling test was used to measure the characteristics of fermentation broth and gas, metabolic pathway, energy conversion efficiency, and kinetic of PFHP. The analysis of experimental data showed that the maximum hydrogen yield of 70.25 mL/g was observed at 2500 μmol/L Fe²⁺ addition, with an energy conversion efficiency of 5.21%, which was 19.98% higher over no-addition. However, the maximum hydrogen content of 51.41% and the maximum hydrogen production rate of 17.82 mL/h were observed at 2000 μmol/L Fe²⁺ addition. The experimental results revealed that iron ion played a key role in PFHP, which provided a technical support for improving the performance of PFHP.

Palm oil industrial wastes as a promising feedstock for biohydrogen production: A comprehensive review

By the year 2050, it is estimated that the demand for palm oil is expected to reach an enormous amount of 240 Mt. With a huge demand in the future for palm oil, it is expected that oil palm by-products will rise with the increasing demand. This represents a golden opportunity for sustainable biohydrogen production using oil palm biomass and palm oil mill effluent (POME) as the renewable feedstock. Among the different biological methods for biohydrogen production, dark fermentation and photo-fermentation have been widely studied for their potential to produce biohydrogen by using various waste materials as feedstock, including POME and oil palm biomass. However, the complex structure of oil palm biomass and POME, such as the lignocellulosic composition, limits fermentable substrate available for conversion to biohydrogen. Therefore, proper pre-treatment and suitable process conditions are crucial for effective biohydrogen generation from these feedstocks. In this review, the characteristics of palm oil industrial waste, the process used for biohydrogen production using palm oil industrial waste, their pros and cons, and the influence of various factors have been discussed, as well as a comparison between studies in terms of types of reactors, pre-treatment strategies, the microbial culture used, and optimum operating condition have been presented. Through biological production, hydrogen production rates up to 52 L-H₂/L-medium/h and 6 L-H₂/L-medium/h for solid and liquid palm oil industrial waste, respectively, can be achieved. In short, the continuous supply of palm oil production by-product and relatively, the low cost of the biological method for hydrogen production indicates the potential source of renewable energy.

Experimental study on optimization of initial pH for photo-fermentation bio-hydrogen under different enzymatic hydrolysis of chlorella vulgaris

In the paper, Use Chlorella as raw material, HAU-M1 Photosynthetic bacteria (PSB) as hydrogen-producing bacteria, the influence of initial pH on bio-hydrogen by photosynthetic organisms from Chlorella vulgaris with diverse enzyme addition was studied. The results showed that when using cellulase as hydrolase, the optimum initial pH was 7.0 and highest bio-hydrogen was 25.99 mL/g dry cell weight. Using neutral protease as hydrolase, the optimum initial pH was 8.0 and highest bio-hydrogen was 16.47 mL/g dry cell weight. Using mixed enzyme of cellulase and protease as hydrolase, the optimal initial pH was 7.0 and highest bio-hydrogen was 27.43 mL/g dry cell weight. The bio-hydrogen from Chlorella after mixed enzymatic hydrolysis is better than that of single enzymatic hydrolysis, we think the mixed enzymatic hydrolysis of cellulase and protease was superior to the single enzymatic hydrolysis of the two enzymes, which provides a scientific reference and low-cost bio-hydrogen technology by microalgae.

Novel insights into the anaerobic digestion of propionate via Syntrophobacter fumaroxidans and Geobacter sulfurreducens: Process and mechanism

The accumulation of volatile fatty acids, particularly propionic acid, significantly inhibits the efficiency of the anaerobic digestion system. In propionate degradation metabolism, the unfavorable thermodynamics of syntrophic reactions, strict ecological niche of syntrophic priopionate oxidizing bacteria, and slow metabolic rate of methanogens are regarded as major limitations. In this study, Geobacter sulfurreducens was co-cultured with Syntrophobacter fumaroxidans in bioelelectrochemical cells to analyze the propionate degradation process, impact factor, mechanism metabolic pathways, and electron transfer comprehensively. The results revealed that the syntroph S. fumaroxidans and syntrophic partner G. sulfurreducens achieved more efficient propionate degradation than the control group, comprising S. fumaroxidans and methanogens. Moreover, the carbon resource concentration and pH were both significantly correlated with propionate degradation (P < 0.01). The results further confirmed that G. sulfurreducen strengthened the consumption of H₂ and acetate via direct interspecific electron transfer in propionate degradation. These findings indicate that G. sulfurreducens plays an unidentified functional role in propionate degradation.

Main Hydrogen Production Processes: An Overview

Due to its characteristics, hydrogen is considered the energy carrier of the future. Its use as a fuel generates reduced pollution, as if burned it almost exclusively produces water vapor. Hydrogen can be produced from numerous sources, both of fossil and renewable origin, and with as many production processes, which can use renewable or non-renewable energy sources. To achieve carbon neutrality, the sources must necessarily be renewable, and the production processes themselves must use renewable energy sources. In this review article the main characteristics of the most used hydrogen production methods are summarized, mainly focusing on renewable feedstocks, furthermore a series of relevant articles published in the last year, are reviewed. The production methods are grouped according to the type of energy they use; and at the end of each section the strengths and limitations of the processes are highlighted. The conclusions compare the main characteristics of the production processes studied and contextualize their possible use.

Integrated Approach for Wastewater Treatment and Biofuel Production in Microalgae Biorefineries

The increasing world population generates huge amounts of wastewater as well as large energy demand. Additionally, fossil fuel’s combustion for energy production causes the emission of greenhouse gases (GHG) and other pollutants. Therefore, there is a strong need to find alternative green approaches for wastewater treatment and energy production. Microalgae biorefineries could represent an effective strategy to mitigate the above problems. Microalgae biorefineries are a sustainable alternative to conventional wastewater treatment processes, as they potentially allow wastewater to be treated at lower costs and with lower energy consumption. Furthermore, they provide an effective means to recover valuable compounds for biofuel production or other applications. This review focuses on the current scenario and future prospects of microalgae biorefineries aimed at combining wastewater treatment with biofuel production. First, the different microalgal cultivation systems are examined, and their main characteristics and limitations are discussed. Then, the technologies available for converting the biomass produced during wastewater treatment into biofuel are critically analyzed. Finally, current challenges and research directions for biofuel production and wastewater treatment through this approach are outlined.

Sustained Photosynthesis and Oxygen Generation of Microalgae-Embedded Silk Fibroin Hydrogels

Microalgae immobilized in hydrogels offer advantages over those cultured in suspension culture in terms of carbon fixation and oxygen emission. However, alginate as a commonly used hydrogel for microalgal immobilization encounters problems with mechanical strength and stability. To address this limitation, silk fibroin (silk) hydrogels prepared by ultrasonication were utilized to host microalgae when mixed with the presonicated protein solution prior to its gelation. The gelation time, stability, and light transmission of these silk gels were evaluated, and a silk concentration of 4% w/v and a gel thickness of 1 mm provided mechanical strength and stability during algal culture in comparison to alginate hydrogels. Furthermore, silk hydrogels with algal cell densities of 7.6 × 10⁵ and 7.8 × 10⁷ cells/mL had better stability than those with a lower cell density (3.2 × 10³ cells/mL), likely due to cell confinement and impact on proliferation. The silk hydrogels with microalgae at a high density generated 6.13 mg/L of oxygen continuously for 7 days. An oxygen-generating device was fabricated by coating the surface of a dialysis tube with a thin layer of the microalgae-embedded silk hydrogel, where the microalgal cells were nourished with culture medium prefilled in the dialysis tube. When suspended in a sealed flask filled with CO₂ gas, the system continuously produced oxygen (151 mL) for at least 60 days, with an oxygen production efficiency 6 times that of microalgal suspension culture controls. This microalgae embedding and cultivation technique could have potential utility in air purification, tissue repair, and other applications due to the efficient and sustained generation of oxygen.

Valorization of microalgal biomass for biohydrogen generation: A review

Third generation biomass, i.e. microalgae, has emerged as a promising alternative to first and second generation biomass for biohydrogen production. However, its utilization is still low at present, due to several reasons including the strong and rigidity of the microalgal cell wall that limit the hydrolysis efficiency during dark fermentation (DF) and photofermentation (PF) processes. To improve the utilization efficiency of microalgal biomass, it is crucial that important aspects related to the production of the biomass and the following processes are elaborated. Thus, this article provides detailed overview of algal strains, cultivation, and harvesting. It also presents recent research and detailed information on microalgal biomass pretreatment, and biohydrogen production through DF, PF, and co-digestion of microalgal biomass with organic materials. Furthermore, factors affecting fermentation processes performance and the use of molecular techniques in biohydrogen production are presented. This review also discusses challenges and future prospects towards biohydrogen production from microalgal biomass.

Advanced microalgae-based renewable biohydrogen production systems: A review

The reliance of fossil fuel for industrial and energy sectors has resulted in its depletion. Therefore, enormous efforts have been considered to move-out from fossil fuels to renewable energy sources based industrial process developments. Recently, biohydrogen (bio-H₂) has been recognised as a clean source of fuel with high-energy efficiency, which can be produced via different routes. Among them, biological fermentation processes are highly recommended due to eco-friendly and economically viable approaches compared to that of thermochemical processes. However, the low H₂ yield and high production cost are major bottlenecks for commercial scale operations. Thus, this review proposed an integrated microalgae-based H₂ production process, which will provides a possible route for commercialization in near future. Furthermore, process integration to improve efficiency and implementation of advanced strategies for the enhancement of bio-H₂ production, economic viability, and future research needs are discussed.