1
|
Pang S, Wang X, Pu J, Liang C, Yao S, Qin C. Differential Studies on the Structure of Lignin-Carbohydrate Complexes (LCC) in Alkali-Extracted Plant Hemicelluloses. Polymers (Basel) 2024; 16:1403. [PMID: 38794596 PMCID: PMC11124851 DOI: 10.3390/polym16101403] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/01/2024] [Revised: 05/10/2024] [Accepted: 05/13/2024] [Indexed: 05/26/2024] Open
Abstract
Hemicellulose extracted by alkali treatment is of interest because of the advantages of its intact sugar structure and high degree of polymerization. However, the hemicellulose extracted by alkali treatment contained more lignin fragments and the presence of a lignin-carbohydrate complex (LCC), which affected the isolation and purification of hemicellulose and its comprehensive utilization. Therefore, the evaluation of the LCC structure of different types of lignocellulosic resources is of great significance. In this study, the LCC structures of hardwoods and Gramineae were enriched in alkaline systems. Information on the composition, structural proportions, and connection patterns of LCC samples was discussed. The similarities and differences between the LCC structures of different units of raw materials were comparatively studied. The results indicated that the monosaccharide fractions were higher in the LCC of Gramineae compared to hardwoods. The composition of the lignin fraction was dominated by G and S units. The phenyl glycosidic (PhGlc) bond is the predominant LCC linkage under alkali-stabilized conditions. In addition, Gramineae PhGlc types are more numerous compared to hardwoods. The results of the study provide insights into the differences in the chemical composition and structural features of LCC in different plants and provide important guidance for the optimization of the process of purifying hemicellulose.
Collapse
Affiliation(s)
| | | | | | - Chen Liang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, China; (S.P.); (X.W.); (J.P.); (S.Y.); (C.Q.)
| | | | | |
Collapse
|
2
|
Wang X, Pu J, Liu Y, Qin C, Yao S, Wang S, Liang C. Unveiling the Dissolution Regularities of the Lignin-Carbohydrate Complex in Bamboo Cell Walls during Alkali Pretreatment. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY 2024; 72:10206-10217. [PMID: 38597965 DOI: 10.1021/acs.jafc.3c09012] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 04/11/2024]
Abstract
Bamboo is a promising biomass resource. However, the complex multilayered structure and chemical composition of bamboo cell walls create a unique anti-depolymerization barrier, which increases the difficulty of separation and utilization of bamboo. In this study, the relationship between the connections of lignin-carbohydrate complexes (LCCs) within bamboo cell walls and their multilayered structural compositions was investigated. The chemical composition, structural properties, dissolution processes, and migration mechanisms of LCCs were analyzed. Alkali-stabilized LCC bonds were found to be predominantly characterized by phenyl glycoside (PhGlc) bonds along with numerous p-coumaric acid (PCA) linkage structures. As demonstrated by the NMR and CLSM results, the dissolution of the LCC during the alkaline pretreatment process was observed to migrate from the inner secondary wall (S-layer) of the bamboo fiber cell walls to the cell corner middle lamella (CCML) and compound middle lamella (CML), ultimately leading to its release from the bamboo. Furthermore, the presence of H-type lignin-FA-arabinoxylan linkage structures within the bamboo LCC was identified with their primary dissolution observed in the S-layer of the bamboo fiber cell walls. The study results provided a clear target for breaking down the anti-depolymerization barrier in bamboo, signifying a major advancement in achieving the comprehensive separation of bamboo components.
Collapse
Affiliation(s)
- Xin Wang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, P. R. China
| | - Jiali Pu
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, P. R. China
| | - Yang Liu
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, P. R. China
| | - Chengrong Qin
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, P. R. China
| | - Shuangquan Yao
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, P. R. China
| | - Shuangfei Wang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, P. R. China
| | - Chen Liang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, P. R. China
| |
Collapse
|
3
|
Wang M, Zhan Y, Zhao J, Li Z. Pretreatment of moso bamboo with p-toluenesulfonic acid for the recovery and depolymerization of hemicellulose. BIORESOURCE TECHNOLOGY 2023; 378:129006. [PMID: 37011848 DOI: 10.1016/j.biortech.2023.129006] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/26/2023] [Revised: 03/29/2023] [Accepted: 03/30/2023] [Indexed: 06/19/2023]
Abstract
Bamboo and its mechanical processing residues have broad prospects for high value-added utilization. In this research, p-toluenesulfonic acid was used for the pretreatment of bamboo to investigate the effects of extraction and depolymerization of hemicellulose. The response and behavior of changes of cell-wall chemical components were investigated after different solvent concentration, time, and temperature pretreatment. Results indicated that the maximum extraction yield of hemicellulose was 95.16 % with 5 % p-toluenesulfonic acid at 140 °C for 30 min. The depolymerized components of hemicellulose in the filtrate were mainly xylose and xylooligosaccharide, with xylobiose accounting for 30.77 %. The extraction of xylose from the filtrate reached a maximum of 90.16 % with 5 % p-toluenesulfonic acid at 150 °C for 30 min pretreatment. This research provided a potential strategy for the industrial production of xylose and xylooligosaccharide from bamboo and for the future conversion and utilization.
Collapse
Affiliation(s)
- Meixin Wang
- International Centre for Bamboo and Rattan, Key Laboratory of National Forestry and Grassland Administration/Beijing for Bamboo & Rattan Science and Technology, Beijing 100102, China
| | - Yawei Zhan
- International Centre for Bamboo and Rattan, Key Laboratory of National Forestry and Grassland Administration/Beijing for Bamboo & Rattan Science and Technology, Beijing 100102, China
| | - Jiayue Zhao
- International Centre for Bamboo and Rattan, Key Laboratory of National Forestry and Grassland Administration/Beijing for Bamboo & Rattan Science and Technology, Beijing 100102, China
| | - Zhiqiang Li
- International Centre for Bamboo and Rattan, Key Laboratory of National Forestry and Grassland Administration/Beijing for Bamboo & Rattan Science and Technology, Beijing 100102, China.
| |
Collapse
|
4
|
Peng M, Zhu J, Luo Y, Li T, Xia X, Qin C, Liang C, Bian H, Yao S. Enhancement of separation selectivity of hemicellulose from bamboo using freeze-thaw-assisted p-toluenesulfonic acid treatment at low acid concentration and high temperature. BIORESOURCE TECHNOLOGY 2022; 363:127879. [PMID: 36058537 DOI: 10.1016/j.biortech.2022.127879] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/08/2022] [Revised: 08/25/2022] [Accepted: 08/26/2022] [Indexed: 06/15/2023]
Abstract
The cellulose-rich residual solids are obtained with p-toluenesulfonic acid (p-TsOH) treatment. However, better fractionation of hemicellulose and separation is difficult to obtain during treatment. This study aims at investigating the separation selectivity of bamboo hemicellulose using freeze-thaw-assisted p-TsOH (F/p-TsOH) treatment. The desired separation effect was achieved at freezing temperature -40 °C, freezing time 20 h, p-TsOH concentration 3.0 %, treatment temperature 130 °C and time 80 min. 93.26 % hemicellulose separation was found, which was 32.88 % higher than that of conventional p-TsOH treatment. Furthermore, the separation yield of lignin decreased significantly from 69.29 % to 13.98 %. The distinct lignin characteristic absorption peaks were found, while that of hemicellulose was difficult to observe. The fiber crystallinity index increased from 50.42 to 56.55 %. Furthermore, greater selectivity for hemicellulose separation was achieved. The results provide a new research thinking for efficient fractionation of lignocellulosic biomass by organic acid treatment.
Collapse
Affiliation(s)
- Meijiao Peng
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning, 530004, PR China
| | - Jiatian Zhu
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning, 530004, PR China
| | - Yadan Luo
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning, 530004, PR China
| | - Tao Li
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning, 530004, PR China
| | - Xuelian Xia
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning, 530004, PR China
| | - Chengrong Qin
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning, 530004, PR China
| | - Chen Liang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning, 530004, PR China
| | - Huiyang Bian
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, PR China
| | - Shuangquan Yao
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning, 530004, PR China.
| |
Collapse
|
5
|
Bao Y, Zhu J, Zeng F, Li J, Wang S, Qin C, Liang C, Huang C, Yao S. Superior separation of hemicellulose-derived sugars from eucalyptus with tropic acid pretreatment. BIORESOURCE TECHNOLOGY 2022; 364:128082. [PMID: 36216284 DOI: 10.1016/j.biortech.2022.128082] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/14/2022] [Revised: 10/02/2022] [Accepted: 10/03/2022] [Indexed: 06/16/2023]
Abstract
Organic acid pretreatments can efficiently separate biomass-based hemicellulose and selectively produce hemicellulose-derived sugars. In this study, hemicellulose is separation as xylose, oligosaccharides in the tropic acid-catalyzed hydrothermal pretreatment of eucalyptus. The maximum yield of hemicellulose-derived sugars (85.78 %) with 71.25 % xylose selectivity (based on the total xylose in raw material) was achieved in the hydrolysate under optimal conditions (5 % TA, 160 ℃, 80 min). The yield of hemicellulose-derived sugar and the separation yield of hemicellulose increased by 11.06 % and 11.45 % compared with glycolic acid pretreatment in the similar severity factor. The separation yield of cellulose and lignin was decreased by 4.23 % and 0.98 %, respectively. This resulted in residual solids with higher biological stability (higher fiber crystallinity index, higher thermal stability, and higher lignin content). Therefore, higher hemicellulose separation selectivity and rich hemicellulose-derived sugars were obtained using TA pretreatment. The work would bring up a new method for biomass refining.
Collapse
Affiliation(s)
- Yuqi Bao
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Jiatian Zhu
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Fanyan Zeng
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Jiao Li
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Shanshan Wang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Chengrong Qin
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Chen Liang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Caoxing Huang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, PR China
| | - Shuangquan Yao
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China.
| |
Collapse
|
6
|
Wang X, Han J, Pang S, Li J, Zhao J, Qin C, Yao S, Liu Y, Liang C. Structural enrichment and identification of lignin-carbohydrate complex in alkaline stabilized system. Carbohydr Polym 2022; 296:119873. [DOI: 10.1016/j.carbpol.2022.119873] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/23/2022] [Revised: 07/11/2022] [Accepted: 07/12/2022] [Indexed: 11/26/2022]
|
7
|
Zeng F, Wang S, Liang J, Cao L, Liu X, Qin C, Liang C, Si C, Yu Z, Yao S. High-efficiency separation of hemicellulose from bamboo by one-step freeze-thaw-assisted alkali treatment. BIORESOURCE TECHNOLOGY 2022; 361:127735. [PMID: 35934248 DOI: 10.1016/j.biortech.2022.127735] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/22/2022] [Revised: 07/29/2022] [Accepted: 07/30/2022] [Indexed: 06/15/2023]
Abstract
The selectivity of alkali treatment (AT) for hemicellulose separation is reduced due to the alkali solubility of lignin. It was improved using freeze-thaw-assisted alkaline treatment (FT/AT). In this study, bamboo hemicellulose was separated via a one-step freeze-thaw-assisted alkali treatment (OFT/AT). The effects of freezing temperature, freezing time, alkali concentration, and treatment time on bamboo components were studied. The separation yield of hemicellulose was 73.26%, compared to 64.00% using conventional FT/AT. The separation of lignin and cellulose was inhibited as alkali concentration decreased from 7.0% to 5.0%. The extraction yield of hemicellulose increased from 46.35% to 56.12%. Structural analysis of extracted hemicellulose revealed the effective inhibition of the breakage of the xylose backbone and arabinose side chain of hemicellulose. This indicated that the molecular structure of extracted hemicellulose was relatively complete. It provides theoretical support for the efficient separation of hemicellulose by AT.
Collapse
Affiliation(s)
- Fanyan Zeng
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Shanshan Wang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Jiarui Liang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Liming Cao
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Xiaoxu Liu
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Chengrong Qin
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Chen Liang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Chuanling Si
- Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, PR China
| | - Zebin Yu
- School of Resources, Environment and Materials, Guangxi University, Nanning 530004, PR China
| | - Shuangquan Yao
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China.
| |
Collapse
|
8
|
Qin C, Zeng H, Liu B, Zhu J, Wang F, Wang S, Liang C, Huang C, Ma J, Yao S. Efficient removal of residual lignin from eucalyptus pulp via high-concentration chlorine dioxide treatment and its effect on the properties of residual solids. BIORESOURCE TECHNOLOGY 2022; 360:127621. [PMID: 35842067 DOI: 10.1016/j.biortech.2022.127621] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/29/2022] [Revised: 07/09/2022] [Accepted: 07/11/2022] [Indexed: 06/15/2023]
Abstract
In fact, effectively removing lignin from pulp fibers facilitates the conversion and utilization of cellulose. In this study, the residual lignin in eucalyptus pulp was separated using a high concentration of chlorine dioxide. The effects of chlorine dioxide dosage, temperature, and time on lignin removal were investigated. The optimal conditions are chlorine dioxide dosage 5.0%, reaction temperature 40 °C, and reaction time 30 min. The lignin removal yield is 88.21%. The removal yields of cellulose and hemicellulose are 2.28 and 17.00%, respectively. The treated eucalyptus pulp has higher fiber crystallinity and thermal stability. The carbon content on the fiber surface is significantly reduced. The results show that lignin is removed by efficient oxidation, and the degradation of carbohydrates is inhibited using high concentrations of chlorine dioxide at low temperatures and short reaction times. This provides theoretical support for high value conversion of cellulose.
Collapse
Affiliation(s)
- Chengrong Qin
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Huali Zeng
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Baojie Liu
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Jiatian Zhu
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Fei Wang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Shuo Wang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Chen Liang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Caoxing Huang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, PR China
| | - Jiliang Ma
- College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, PR China
| | - Shuangquan Yao
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China.
| |
Collapse
|
9
|
Deng B, Luo Y, Peng M, Li T, Su J, Wang Y, Xia X, Feng C, Yao S. Kinetics of Lignin Separation during the Atmospheric Fractionation of Bagasse with p-Toluenesulfonic Acid. Int J Mol Sci 2022; 23:ijms23158743. [PMID: 35955877 PMCID: PMC9369161 DOI: 10.3390/ijms23158743] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/23/2022] [Revised: 08/02/2022] [Accepted: 08/02/2022] [Indexed: 11/16/2022] Open
Abstract
As a green and efficient component separation technology, organic acid pretreatment has been widely studied in biomass refining. In particular, the efficient separation of lignin by p-toluenesulfonic acid (p-TsOH) pretreatment has been achieved. In this study, the mechanism of the atmospheric separation of bagasse lignin with p-TsOH was investigated. The separation kinetics of lignin was analyzed. A non-simple linear relationship was found between the separation yield of lignin and the concentration of p-TsOH, the temperature and the stirring speed. The shrinking nucleus model for the separation of lignin was established based on the introduction of mass transfer and diffusion factors. A general model of the total delignification rate was obtained. The results showed that the process of lignin separation occurred into two phases, i.e., a fast stage and a slow stage. The results provide a theoretical basis for the efficient separation of lignin by p-TsOH pretreatment.
Collapse
|
10
|
High-Efficiency and High-Quality Extraction of Hemicellulose of Bamboo by Freeze-Thaw Assisted Two-Step Alkali Treatment. Int J Mol Sci 2022; 23:ijms23158612. [PMID: 35955757 PMCID: PMC9369068 DOI: 10.3390/ijms23158612] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/14/2022] [Revised: 08/01/2022] [Accepted: 08/02/2022] [Indexed: 11/17/2022] Open
Abstract
Hemicellulose is a major component of the complex biomass recalcitrance structure of fiber cell walls. Even though biomass recalcitrance protects plants, it affects the effective utilization of lignocellulosic biomass resources. Therefore, the separation and extraction of hemicellulose is very important. In this study, an improved two-step alkali pretreatment method was proposed to separate hemicellulose efficiently. Firstly, 16.61% hemicellulose was extracted from bamboo by the weak alkali treatment. Then, the physical freezing and the alkali treatment were carried out by freezing at −20 °C for 12.0 h and thawing at room temperature, heating to 80 °C, and treating with 5.0% sodium hydroxide for 90 min; the extraction yield of hemicellulose reached 73.93%. The total extraction yield of the two steps was 90.54%, and the molecular weight and purity reached 44,865 g·mol–1 and 89.60%, respectively. It provides a new method for breaking the biomass recalcitrance of wood fiber resources and effectively extracting hemicellulose.
Collapse
|
11
|
Zeng H, Liu B, Li J, Li M, Peng M, Qin C, Liang C, Huang C, Li X, Yao S. Efficient separation of bagasse lignin by freeze-thaw-assisted p-toluenesulfonic acid pretreatment. BIORESOURCE TECHNOLOGY 2022; 351:126951. [PMID: 35257885 DOI: 10.1016/j.biortech.2022.126951] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/06/2022] [Revised: 03/01/2022] [Accepted: 03/02/2022] [Indexed: 06/14/2023]
Abstract
Lignin separation is an important procedure that benefits multiple industries and in particular biomass transformation efforts. In this study, bagasse lignin was separated by freeze-thaw-assisted p-toluenesulfonic acid (p-TsOH) pretreatment. The optimal conditions were freezing temperature -60 °C, freezing time 8.0 h, thawing temperature 15 °C, p-TsOH concentration 60%, pretreatment temperature 70 °C, and time 20 min. Lower acid concentrations and temperatures were used compared with traditional p-TsOH pretreatment. The efficiency and selectivity of lignin separation were improved. It was attributed to freeze-thawing, which provided a more efficient physical channel for the effective penetration of p-TsOH. The separation, extraction and purity of lignin were improved to 89.76%, 78.22% and 77.89%, respectively. High separation, high extraction, high purity and large molecular weight lignin samples were obtained. In addition, the recovery and reuse of p-TsOH was enhanced. This provided a new method for the efficient and clean separation of lignin.
Collapse
Affiliation(s)
- Huali Zeng
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Baojie Liu
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Jiao Li
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Mei Li
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Meijiao Peng
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Chengrong Qin
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Chen Liang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Caoxing Huang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, PR China
| | - Xinping Li
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, PR China
| | - Shuangquan Yao
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China.
| |
Collapse
|
12
|
Zhao J, Gong Z, Chen C, Liang C, Huang L, Huang M, Qin C, Wang S. Adsorption Mechanism of Chloropropanol by Crystalline Nanocellulose. Polymers (Basel) 2022; 14:polym14091746. [PMID: 35566915 PMCID: PMC9101952 DOI: 10.3390/polym14091746] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/28/2022] [Revised: 04/19/2022] [Accepted: 04/20/2022] [Indexed: 11/20/2022] Open
Abstract
Paper packaging materials are widely used as sustainable green materials in food packaging. The production or processing of paper materials is conducted in an environment that contains organic chlorides; therefore, potential food safety issues exist. In this study, the adsorption behavior of organic chlorides on paper materials was investigated. Chloropropanol, which has been extensively studied in the field of food safety, was employed as the research object. We studied the adsorption mechanism of chloropropanol on a crystalline nanocellulose (CNC) model. The results demonstrated that physical adsorption was the prevailing process, and the intermolecular hydrogen bonds acted as the driving force for adsorption. The adsorption effect assumed greatest significance under neutral and weakly alkaline conditions. A good linear relationship between the amount of chloropropanol adsorbed and the amount of CNC used was discovered. Thus, the findings of this study are crucial in monitoring the safety of products in systems containing chloropropanol and other chlorinated organic substances. This is particularly critical in the production of food-grade paper packaging materials.
Collapse
|
13
|
Zhu J, Bao Y, Lv L, Zeng F, Du D, Liang C, Ge J, Wang S, Yao S. Optimization of Demineralization and Pyrolysis Performance of Eucalyptus Hydrothermal Pretreatment. Polymers (Basel) 2022; 14:polym14071333. [PMID: 35406206 PMCID: PMC9002365 DOI: 10.3390/polym14071333] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/11/2022] [Revised: 03/21/2022] [Accepted: 03/22/2022] [Indexed: 12/29/2022] Open
Abstract
The preparation of bio-oil through biomass pyrolysis is promoted by different demineralization processes to remove alkali and alkaline earth metal elements (AAEMs). In this study, the hydrothermal pretreatment demineralization was optimized by the response surface method. The pretreatment temperature, time and pH were the response elements, and the total dissolution rates of potassium, calcium and magnesium were the response values. The interactions of response factors for AAEMs removal were analyzed. The interaction between temperature and time was significant. The optimal AAEMs removal process was obtained with a reaction temperature of 172.98 °C, time of 59.77 min, and pH of 3.01. The optimal dissolution rate of AAEMs was 47.59%. The thermal stability of eucalyptus with and without pretreatment was analyzed by TGA. The hydrothermal pretreatment samples exhibit higher thermostability. The composition and distribution of pyrolysis products of different samples were analyzed by Py-GC/MS. The results showed that the content of sugars and high-quality bio-oil (C6, C7, C8 and C9) were 60.74% and 80.99%, respectively, by hydrothermal pretreatment. These results show that the removal of AAEMs through hydrothermal pretreatment not only improves the yield of bio-oil, but also improves the quality of bio-oil and promotes an upgrade in the quality of bio-oil.
Collapse
|
14
|
Luo Y, Li Y, Cao L, Zhu J, Deng B, Hou Y, Liang C, Huang C, Qin C, Yao S. High efficiency and clean separation of eucalyptus components by glycolic acid pretreatment. BIORESOURCE TECHNOLOGY 2021; 341:125757. [PMID: 34411942 DOI: 10.1016/j.biortech.2021.125757] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/24/2021] [Revised: 08/08/2021] [Accepted: 08/09/2021] [Indexed: 06/13/2023]
Abstract
Glycolic acid has chemical properties similar to those of formic acid. Therefore, similar to formic acid pretreatment, glycolic acid pretreatment has the separation effect of hemicellulose. In this study, eucalyptus hemicellulose was effectively separated by glycolic acid pretreatment. The effects of glycolic acid concentration, temperature and time on the separation of cellulose, hemicellulose and lignin were investigated. The optimum conditions were acid concentration 5.40%, temperature 140 °C, time 3.0 h. The highest yield of xylose was 56.72%. The recovery rate of glycolic acid was 91%. Compared to formic acid, the yield of xylose increased to 10.33% while that of lignin decreased to 11.08%. It showed high selectivity for hemicellulose separation, yielding 65.48% hemicellulose with 72.08% purity. The depolymerization and repolymerization of lignin were inhibited. The integrity of the cellulose structure was preserved. It provides theoretical support for the fractional separation and high-value transformation of lignocellulosic biomass.
Collapse
Affiliation(s)
- Yadan Luo
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Yan Li
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Liming Cao
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Jiatian Zhu
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Baojuan Deng
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Yajun Hou
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Chen Liang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Caoxing Huang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, PR China
| | - Chengrong Qin
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Shuangquan Yao
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China.
| |
Collapse
|
15
|
Li J, Liu Z, Feng C, Liu X, Qin F, Liang C, Bian H, Qin C, Yao S. Green, efficient extraction of bamboo hemicellulose using freeze-thaw assisted alkali treatment. BIORESOURCE TECHNOLOGY 2021; 333:125107. [PMID: 33878499 DOI: 10.1016/j.biortech.2021.125107] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/24/2021] [Revised: 03/25/2021] [Accepted: 03/27/2021] [Indexed: 06/12/2023]
Abstract
The premise of high value utilization of lignocellulosic biomass is effective separation of hemicellulose. In this paper, the extraction of bamboo hemicellulose using freeze-thaw assisted alkali treatment (FAT) was studied. The effect of alkali concentration, alkali treatment time, freezing temperature, and freeze-thaw time on the main components was studied. Bamboo was frozen at -30 °C for 12 h, thawed at room temperature, and then treated at 75 °C for 90 min with 7.0% alkali. The extraction rate of hemicellulose was as high as 64.71%. The purity of hemicellulose samples using conventional AT decreased from 82.63% to 78.56%. Hemicellulose with the same yield as that of conventional alkali treatment was obtained by further reducing the alkali concentration. The purity of hemicellulose samples increased from 82.63% to 89.45%. It had a higher purity, higher molecular weight, and lower polydispersity. A new, green and efficient alkaline extraction method for hemicellulose was developed.
Collapse
Affiliation(s)
- Jing Li
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Zhaomeng Liu
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Chengqi Feng
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Xiaoying Liu
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Fangyu Qin
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Chen Liang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Huiyang Bian
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, PR China
| | - Chengrong Qin
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Shuangquan Yao
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China.
| |
Collapse
|
16
|
Ma M, Bai Y, Wang J, Lv P, Song X, Su W, Yu G. Study on the pyrolysis characteristics and kinetic mechanism of cow manure under different leaching solvents pretreatment. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2021; 290:112580. [PMID: 33866090 DOI: 10.1016/j.jenvman.2021.112580] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/25/2021] [Revised: 03/25/2021] [Accepted: 04/07/2021] [Indexed: 06/12/2023]
Abstract
Cow manure (CM) is a kind of biowaste with potential for heat recovery and energy. The effects of different leaching solvents on the physicochemical structure of CM and the catalysis role of AAEMs on the thermal behavior were studied. TGA experiments showed that the maximum weight loss rate and the peak temperature of hemicellulose and cellulose increased after leaching, while the TG/DTG curve moved to a high temperature direction. The devolatilization index (Di) value of the raw and leaching samples increased with the increase of the heating rate, indicating that the higher heating rate promoted the release of volatile. The treatment with leaching not only removed AAEMs in CM effectively, but also led to a larger specific surface area and pore volume, and reduced the crystallinity of cellulose and crystal size in CM. Na salt and K salt were mainly in water soluble state, while Ca salt and Mg salt were mainly in acid soluble salt. Compared with the change of physical and chemical structure caused by leaching, the removal of AAEMs played a dominant role in the pyrolysis characteristics of the samples. The removal efficiency of AAEMs increased with the strength of acid. Based on Kissinger model, the Eα of Raw-CM, H2O-CM, CH3COOH-CM, HCl-CM, HNO3-CM and H2SO4-CM is 171.30 kJ/mol, 187.58 kJ/mol, 190.86 kJ/mol, 292.10 kJ/mol, 287.79 kJ/mol and 280.69 kJ/mol respectively. Both the raw and leaching samples followed the reaction order mechanism and tended to react according to a higher-order reaction model between n = 1.5 and n = 4. In contrast, CH3COOH is an ideal solvent for leaching pretreatment.
Collapse
Affiliation(s)
- Meng Ma
- State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering, College of Chemistry and Chemical Engineering, Ningxia University, Yinchuan, 750021, China
| | - Yonghui Bai
- State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering, College of Chemistry and Chemical Engineering, Ningxia University, Yinchuan, 750021, China.
| | - Jiaofei Wang
- State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering, College of Chemistry and Chemical Engineering, Ningxia University, Yinchuan, 750021, China
| | - Peng Lv
- State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering, College of Chemistry and Chemical Engineering, Ningxia University, Yinchuan, 750021, China
| | - Xudong Song
- State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering, College of Chemistry and Chemical Engineering, Ningxia University, Yinchuan, 750021, China
| | - Weiguang Su
- State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering, College of Chemistry and Chemical Engineering, Ningxia University, Yinchuan, 750021, China
| | - Guangsuo Yu
- State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering, College of Chemistry and Chemical Engineering, Ningxia University, Yinchuan, 750021, China; Institute of Clean Coal Technology, East China University of Science and Technology, Shanghai, 200237, China.
| |
Collapse
|
17
|
Activated carbon preparation from eucalyptus wood chips using continuous carbonization-steam activation process in a batch intermittent rotary kiln. Sci Rep 2021; 11:13948. [PMID: 34230520 PMCID: PMC8260597 DOI: 10.1038/s41598-021-93249-x] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/14/2020] [Accepted: 06/22/2021] [Indexed: 11/08/2022] Open
Abstract
The production of activated carbon from eucalyptus wood chips by steam activation in a 2000 kg batch intermittent rotary kiln with continuous carbonization-steam activation process conducted at 500 °C to 700 °C was studied. The activated carbon products were characterized by FTIR, SEM-EDS, Raman spectroscopy, and BET analysis. Percent yields, iodine number, and methylene blue number of the produced activated carbon materials were measured as well. It was shown that the percent yields of the activated carbon materials made in the temperature range from 500 to 700 °C are 21.63 ± 1.52%-31.79 ± 0.70% with capacities of 518-737 mg I2/g and 70.11-96.93 mg methylene blue/g. The BET surface area and micropore volume of the activated carbons are 426.8125-870.4732 m2/g and 0.102390-0.215473 cm3/g, respectively. The steam used in the process could create various oxygen containing surface functional groups such as -CO and -COC groups. In addition, it could also increase the amorphous nature of the activated carbon product. These properties of the activated carbon products are increased with increasing steam activation temperature from 500 to 700 °C. As a result, the activated carbon materials produced at activation temperatures of 600 °C and 700 °C exhibit higher adsorption.
Collapse
|
18
|
Preparation and Swelling Behaviors of High-Strength Hemicellulose-g-Polydopamine Composite Hydrogels. MATERIALS 2021; 14:ma14010186. [PMID: 33401706 PMCID: PMC7795248 DOI: 10.3390/ma14010186] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/11/2020] [Revised: 12/24/2020] [Accepted: 12/28/2020] [Indexed: 11/26/2022]
Abstract
Hemicellulose-based composite hydrogels were successfully prepared by adding polydopamine (PDA) microspheres as reinforcing agents. The effects of PDA microsphere size, dosage, and nitrogen content in hydrogel on the mechanical and rheological properties was studied. The compressive strength of hydrogel was increased from 0.11 to 0.30 MPa. The storage modulus G’ was increased from 7.9 to 22.0 KPa. The gaps in the hemicellulose network are filled with PDA microspheres. There is also chemical cross-linking between them. These gaps increased the density of the hydrogel network structure. It also has good water retention and pH sensitivity. The maximum cumulative release rate of methylene blue was 62.82%. The results showed that the release behavior of hydrogel was pH-responsive, which was beneficial to realizing targeted and controlling drug release.
Collapse
|
19
|
Integrated Leaching and Thermochemical Technologies for Producing High-Value Products from Rice Husk: Leaching of Rice Husk with the Aqueous Phases of Bioliquids. ENERGIES 2020. [DOI: 10.3390/en13226033] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
It remains challenging to develop a techno-economically feasible method to remove alkali and alkaline earth metal species (AAEMs) from rice husk (RH), which is a widely available bioresource across the world. In this study, the AAEMs leaching effect of aqueous phases of both bio-crude prepared by hydrothermal liquefaction (AP-HT) and bio-oil prepared by pyrolysis (AP-Pyro) of RH were systematically investigated. The results indicated that although the acidity of AP-HT and AP-Pyro are much lower than that of HCl, they performed a comparable removal efficiency on AAEMs (Na: 56.2%, K: 96.7%, Mg: 91.0%, Ca: 46.1% for AP-HT, while Na: 58.9%, K: 96.9%, Mg: 94.0%, Ca: 86.3% for AP-Pyro) with HCl. The presence of phenolics in bio-oil could facilitate the penetration of water and organic acids into the inner area of RH cells, thus enhancing the AAEMs removal via chelate reactions. The thermal stability of leached RH during thermochemical conversions was studied via TG and Py-GC-MS. The results showed that the heat conduction efficiency in leached RH was enhanced with a high pyrolysis rate, resulting in a narrow carbon chain distribution (C5–C10) of derived chemical compounds.
Collapse
|
20
|
Feng C, Du J, Wei S, Qin C, Liang C, Yao S. Effect of p-TsOH pretreatment on separation of bagasse components and preparation of nanocellulose filaments. ROYAL SOCIETY OPEN SCIENCE 2020; 7:200967. [PMID: 33047055 PMCID: PMC7540794 DOI: 10.1098/rsos.200967] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 06/04/2020] [Accepted: 08/13/2020] [Indexed: 06/11/2023]
Abstract
The efficient separation of bagasse components was achieved by p-toluenesulfonic acid (p-TsOH) pretreatment. The effects of p-TsOH dosage, reaction temperature and reaction time on cellulose, hemicellulose and lignin contents were studied. Eighty-five per cent of lignin was dissolved, whereas the cellulose loss was minimal (less than 8.1%). Cellulose-rich water-insoluble residual solids were obtained. The degree of polymerization of cellulose decreased slightly, but the crystallinity index (CrI) increased from 52.0% to 68.1%. It indicated that the highly efficient delignification of bagasse was achieved by p-TsOH pretreatment. The nanocellulose filaments (CNFs) were produced by the treated samples. The physico-chemical properties of CNFs were characterized by transmission electron microscopy and thermogravimetric analysis. The results show that the CNFs have smaller average size and higher thermal stability. It provides a new method for CNFs.
Collapse
Affiliation(s)
- Chengqi Feng
- School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, People's Republic of China
- Guangxi Key Laboratory of Clean Pulp and Papermaking and Pollution Control, Nanning 530004, People's Republic of China
| | - Juan Du
- School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, People's Republic of China
- Guangxi Key Laboratory of Clean Pulp and Papermaking and Pollution Control, Nanning 530004, People's Republic of China
| | - Shuai Wei
- School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, People's Republic of China
- Guangxi Key Laboratory of Clean Pulp and Papermaking and Pollution Control, Nanning 530004, People's Republic of China
| | - Chengrong Qin
- School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, People's Republic of China
- Guangxi Key Laboratory of Clean Pulp and Papermaking and Pollution Control, Nanning 530004, People's Republic of China
| | - Chen Liang
- School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, People's Republic of China
- Guangxi Key Laboratory of Clean Pulp and Papermaking and Pollution Control, Nanning 530004, People's Republic of China
| | - Shuangquan Yao
- School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, People's Republic of China
- Guangxi Key Laboratory of Clean Pulp and Papermaking and Pollution Control, Nanning 530004, People's Republic of China
| |
Collapse
|