The mixotrophic denitrification characteristics of Zoogloea sp. L2 accelerated by the redox mediator of 2-hydroxy-1,4-naphthoquinone

Preparation of Indolin-3-one-Containing 1,4-Naphthoquinone Derivatives via Organocatalytic Asymmetric Michael Addition Reaction

This article explores the asymmetric Michael addition reaction of 2-hydroxy-1,4-naphthoquinone and indole-3-ones catalyzed by cinchona alkaloids. This strategy utilizes 2-hydroxy-1,4-naphthoquinone and easily prepared indole-3-one as substrates, resulting in the synthesis of 23 unprecedented indolin-3-ones bearing a 1,4-naphthoquinone unit at the C2 position of indole under simple and mild reaction conditions, with up to 88% yield, 98% ee, and >20:1 dr.

Redox mediator chlorophyll accelerates low-temperature biological denitrification with responses of extracellular polymers and changes in microbial community composition

Low temperatures limit the denitrification wastewater in activated sludge systems, but this can be mitigated by addition of redox mediators (RMs). Here, the effects of chlorophyll (Chl), 1,2-naphthoquinone-4-sulfonic acid (NQS), humic acid (HA), and riboflavin (RF), each tested at three concentrations, were compared for denitrification performance at low temperature, by monitoring the produced extracellular polymeric substances (EPS), and characterizing microbial communities and their metabolic potential. Chl increased the denitrification rate most, namely 4.12-fold compared to the control, followed by NQS (2.62-fold increase) and HA (1.35-fold increase), but RF had an inhibitory effect. Chl promoted the secretion of tryptophan-like and tyrosine-like proteins in the EPS and aided the conversion of protein from tightly bound EPS into loosely bound EPS, which improved the material transfer efficiency. NQS, HA, and RF also altered the EPS components. The four RMs affected the microbial community structure, whereby both conditionally abundant taxa (CAT) and conditionally rare or abundant taxa (CRAT) were key taxa. Among them, CRAT members interacted most with the other taxa. Chl promoted Flavobacterium enrichment in low-temperature activated sludge systems. In addition, Chl promoted the abundance of nitrate reduction genes narGHI and napAB and of nitrite reduction genes nirKS, norBC, and nosZ. Moreover, Chl increased abundance of genes involved in acetate metabolism and in the TCA cycle, thereby improving carbon source utilization. This study increases our understanding of the enhancement of low-temperature activated sludge by RMs, and demonstrates positive effects, in particular by Chl.

Harnessing the potential of ginkgo biloba extract: Boosting denitrification performance through accelerated electron transfer

Ginkgo biloba extract (GBE) had several effects on the human body as one of the widely used phytopharmaceuticals, but it had no application in microbial enhancement in the environmental field. The study focused on the impact of GBE on denitrification specifically under neutral conditions. At the identified optimal addition ratio of 2% (v/v), the system exhibited a noteworthy increase in nitrate reduction rate (NRR) by 56.34%, elevating from 0.71 to 1.11 mg-N/(L·h). Moreover, the extraction of microbial extracellular polymeric substance (EPS) at this ratio revealed changes in the composition of EPS, the electron exchange capacity (EEC) was enhanced from 87.16 to 140.4 μmol/(g C), and the transfer impedance was reduced within the EPS. The flavin, fulvic acid (FA), and humic acid (HA) provided a π-electron conjugated structure for the denitrification system, enhancing extracellular electron transfer (EET) by stimulating carbon source metabolism. GBE also improved electron transfer system activity (ETSA) from 0.025 to 0.071 μL O2/(g·min·prot) and the content of NADH enhanced by 22.90% while significantly reducing the activation energy (Ea) by 85.6% in the denitrification process. The synergy of improving both intracellular and extracellular electron transfer, along with the reduction of Ea, notably amplified the initiation and reduction rates of the denitrification process. Additionally, GBE demonstrated suitability for denitrification across various pH levels, enhancing microbial resilience in alkaline conditions and promoting survival and proliferation. Overall, these findings open the door to potential applications of GBE as a natural additive in the environmental field to improve the efficiency of denitrification processes, which are essential for nitrogen removal in various environmental contexts.

Insights into the Acceleration Mechanism of Intracellular N and Fe Co-doped Carbon Dots on Anaerobic Denitrification Using Proteomics and Metabolomics Techniques

Bulk carbon-based materials can enhance anaerobic biodenitrification when they are present in extracellular matrices. However, little information is available on the effect of nitrogen and iron co-doped carbon dots (N, Fe-CDs) with sizes below 10 nm on this process. This work demonstrated that Fe-NX formed in N, Fe-CDs and their low surface potentials facilitated electron transfer. N, Fe-CDs exhibited good biocompatibility and were effectively absorbed by Pseudomonas stutzeri ATCC 17588. Intracellular N, Fe-CDs played a dominant role in enhancing anaerobic denitrification. During this process, the nitrate removal rate was significantly increased by 40.60% at 11 h with little nitrite and N2O accumulation, which was attributed to the enhanced activities of the electron transport system and various denitrifying reductases. Based on proteomics and metabolomic analysis, N, Fe-CDs effectively regulated carbon/nitrogen/sulfur metabolism to induce more electron generation, less nitrite/N2O accumulation, and higher levels of nitrogen removal. This work reveals the mechanism by which N, Fe-CDs enhance anaerobic denitrification and broaden their potential application in nitrogen removal.

Promoting aerobic denitrification in reservoir water with iron-activated carbon: Enhanced nitrogen and organics removal efficiency, and biological mechanisms

Carbon scarcity limits denitrification in micropolluted water, especially in drinking water reservoirs. Therefore, a Fe-activated carbon (AC) carrier was used in this study to enhance the nitrogen removal capacity of aboriginal denitrification in drinking water reservoirs under aerobic conditions. Following carrier addition, total nitrogen (TN) and permanganate index (CODMn) removal efficiencies reached 81.89% and 72.66%, respectively, and were enhanced by 40.45% and 39.65%. Nitrogen balance analysis indicated that 77.86% of the initial TN was converted into gaseous nitrogen. Biolog analysis suggested that the metabolic activity of denitrifying bacteria was substantially enhanced. 16S rRNA gene sequencing indicated that organic degradation bacteria, hydrogen-consuming, Fe-oxidizing, and Fe-reducing denitrifying bacteria (e.g., Arenimonas, Hydrogenophaga, Zoogloea, Methylibium, and Piscinibacter) evolved into the dominant species. Additionally, napA, nirS, nirK, and nosZ genes were enriched by 3.17, 6.68, 0.40, and 6.70 folds, respectively, which is conducive to complete denitrification. These results provide a novel pathway for the use of Fe-AC to promote aerobic denitrification in micropolluted drinking water reservoirs.

Potential natural attenuation of petroleum hydrocarbons in fuel contaminated soils: Focusing on anaerobic fuel biodegradation involving microbial Fe(III) reduction

Liquid fossil fuels, collectively known as total petroleum hydrocarbons (TPHs), are highly toxic and frequently leak into subsurface environments due to anthropogenic activities. As an in-situ biological remedial option for TPH contamination, aerobic TPH biodegradation is limited due to oxygen's low solubility in water, and because it is consumed quickly by aerobic bacteria. Thus, we investigated the potential of anaerobic TPH degradation by indigenous fermenting bacteria and Fe(III)-reducing bacteria. Twenty 6-10 m soil cores were collected from a closed military base subject to ongoing TPH contamination since the 1980s. Physicochemical and microbial properties were determined at 0.5-m intervals in each core. To assess the relationship between TPH degradation and microbial Fe(III) reduction, soil samples were grouped into high-TPH (>500 mg kg-1) and high-Fe(II) (>450 mg kg-1), high-TPH and low-Fe(II), low-TPH and high-Fe(II), and low-TPH and low-Fe(II) groups. Alpha diversity was significantly lower in high-TPH groups than in low-TPH groups, suggesting that high TPH concentrations exerted a strong selective pressure on bacterial communities. In the high-TPH and low-Fe(II) group, fermenting bacteria, including Microgenomatia and Chlamydiae, were more abundant, suggesting that TPH biodegradation occurred via fermentation. In the high-TPH and high-Fe(II) group, Fe(III)-reducing bacteria, including Geobacter and Zoogloea, were more abundant, suggesting that microbial Fe(III) reduction enhances TPH biodegradation. In contrast, the fermenting and/or Fe(III)-reducing bacteria were not statistically abundant in the low-TPH groups.

Enhanced nitrate and cadmium removal performance at low carbon to nitrogen ratio through immobilized redox mediator granules and functional strains in a bioreactor

The coexistence of multiple pollutants and lack of carbon sources are challenges for the biological treatment of wastewater. To achieve simultaneous removal of nitrate (NO₃^--N) and cadmium (Cd²⁺) at low carbon to nitrogen (C/N) ratios, 2-hydroxy-1,4-naphthoquinone (HNQ) was selected from three redox mediators as an accelerator for denitrification of heterotrophic strain Pseudomonas stutzeri sp. GF2 and autotrophic strain Zoogloea sp. FY6. Then, halloysite nanotubes immobilized with 2-hydroxy-1,4-naphthoquinone (HNTs-HNQ) were prepared and a bioreactor was constructed with immobilized redox mediator granules (IRMG) as the carrier, which was immobilized with HNTs-HNQ and inoculated with the two strains. The immobilized HNQ and the inoculated strains jointly improved the removal ability of NO₃^--N and Cd²⁺ and the removal efficiency of NO₃^--N (25.0 mg L^-1) and Cd²⁺ (5.0 mg L^-1) were 92.81% and 93.94% at C/N = 1.5 and hydraulic retention time (HRT) = 4 h. The Cd²⁺ was removed by adsorption of iron oxides (FeO(OH) and Fe₃O₄) and IRMG. The electron transport system activity (ETSA) of bacteria was improved and the composition of dissolved organic matter in the effluent was not affected by HNQ. The HNQ promoted the production of FeO(OH) and up-regulated the proportion of Zoogloea (54.75% in the microbial community), indicating that Zoogloea sp. FY6 was dominant in the microbial community. In addition, HNQ influenced the metabolic pathways and improved the relative abundance of some genes involved in nitrogen metabolism and the iron redox cycle.

Use of extracellular polymeric substances as natural redox mediators to enhance denitrification performance by accelerating electron transfer and carbon source metabolism

Extracellular polymeric substances (EPS) extracted from waste activated sludge were used as endogenous redox mediator to enhance denitrification performance. The nitrate reduction rate increased 1.42-fold when EPS were added at 75 mg C/L (C represents total organic carbon). EPS addition decreased the charge transfer resistance and improved the electron transport system activity. The nitrate reductase and nitrite reductase activities improved by 29.7% and 25.4%, respectively. The activation energy of the system with EPS addition (25.82 kJ/mol) was 31.1% lower than that of the control group (37.49 kJ/mol). Besides, EPS could be used as electron carriers to accelerate electron transport; its primary role was similar to that of the quinone loop in the electron transfer chain. More importantly, EPS addition enhanced carbon source metabolism, which increased the available nicotinamide adenine dinucleotide yield to 1.21 times that of the control group, and thus promoted the denitrification performance of activated sludge.

Effects of various antibiotics on aerobic nitrogen removal and antibiotic degradation performance: Mechanism, degradation pathways, and microbial community evolution

Little information about the selective stress of various antibiotics and how they influence different stages of aerobic nitrogen removal is available. A long-term aerobic nitrogen removal-moving bed biofilm reactor was established by the inoculation of Achromobacter sp. JL9, capable of heterotrophic nitrification and aerobic denitrification, and aerobic activated sludge. The nitrogen removal and antibiotic degradation performances of various antibiotics were then measured. High total nitrogen (91.83% and 91.51%) removal efficiencies were achieved with sulfamethoxazole or no antibiotics, and lower efficiencies were observed with other antibiotics (trimethoprim, teicoplanin, and ciprofloxacin). These results suggest that various antibiotics have different selective inhibitory effects on aerobic nitrogen removal. Additionally, all antibiotics were partly degraded; proposed degradation pathways according to the detected intermediates included ring-opening, S-N bond cleavage, amination, hydroxylation, and methylation. High-throughput sequencing indicated that aerobic denitrifying, recalcitrant pollutant degrading, and antibiotic-resistant bacteria dominate during the community evolution process.

Microbial profiles associated improving bioelectricity generation from sludge fermentation liquid via microbial fuel cells with adding fruit waste extracts

This first-attempt study illustrated the microbial cooperative interactions related to bioelectricity generation from the mixture of sludge fermentation liquid (SFL) and fruit waste extracts (FWEs) via microbial fuel cells (MFCs). The optimal output voltages of 0.65 V for SFL-MFCs, 0.51 V for FWEs-MFCs and 0.75 V for mixture-MFCs associated with bioelectricity conversion efficiencies of 1.061, 0.718 and 1.391 kWh/kg COD were reached, respectively. FWEs addition for substrates C/N ratio optimization contributed considerably to increase SFL-fed MFCs performance via triggering a higher microbial diversity, larger relatively abundance of functional genes and microbial synergistic interactions with genera enrichment of Clostridium, Alicycliphilus, Thermomonas, Geobacter, Paludibaculum, Pseudomonas, Taibaiella and Comamonas. Furthermore, a conceptual illustration of co-locating scenario of wastewater treatment plant(s), waste sludge in situ acidogenic fermentation, fruit waste collection/crushing station and MFC plant was proposed for the first time, which provided new thinking for future waste sludge treatment toward maximizing solid reduction and power recovery.

Denitrification potential of sodium alginate gel beads immobilized iron-carbon, Zoogloea sp. L2, and riboflavin: Performance optimization and mechanism

A kind of gel beads loaded with iron-carbon powder (Fe-C), Zoogloea sp. L2, and riboflavin (VB2) were prepared through cross-linking of sodium alginate (SA) to establish an immobilized bioreactor. The optimal ratio of SA beads was adjusted by orthogonal experiment. The change of oxidation-reduction potential (ORP) and the concentration of Fe²⁺ and Fe³⁺ showed that the addition of VB2 as a redox mediator can promote denitrification. Under the optimal conditions (carbon to nitrogen (C/N) ratio = 2.0, pH = 7.0, and hydraulic retention time (HRT) = 8 h), the nitrate removal efficiency (NRE) of bioreactor reached 98.48% (1.99 mg L^-1h^-1). Furthermore, Fourier transform infrared spectrometer (FTIR), Fluorescence excitation-emission matrix (EEM), X-ray diffraction (XRD), and gas chromatography (GC) analysis revealed that the immobilization and denitrification of the immobilized bioreactor were excellent. High throughput sequencing also showed that Zoogloea played a vital role in nitrate removal.

Pseudomonas stutzeri GF2 augmented the denitrification of low carbon to nitrogen ratio: Possibility for sewage wastewater treatment

A denitrifying strain with high efficiency at low carbon to nitrogen (C/N) ratio of 2.0 was isolated and characterized. It belongs to the genus Pseudomonas. Scanning electron microscopy (SEM) showed that GF2 was rod-shaped. The nitrate removal efficiency reached up to 92.41% (1.85 mg L^-1 h^-1) with the C/N ratio of 2.0 and the nitrite accumulation eventually decreased to 0.88 mg L^-1. By response surface method (RSM) method, three reaction conditions of strain GF2 were optimized, including pH, C/N ratio, and nitrate concentration. Nitrogen balance and gas detection revealed that 88.03% of nitrogen was removed in gaseous form (included 98.80% nitrogen gas), which confirmed its efficient denitrification ability and pathway. 3D fluorescence spectrum (3D-EEM) manifested that in the absence of organic matter, strain GF2 can utilize extracellular polymeric substance (EPS) as carbon source for efficient denitrification. This research strived to provide new research ideas for low C/N ratio sewage treatment.

Simultaneous removal of nitrate and diethyl phthalate using a novel sponge-based biocarrier combined modified walnut shell biochar with Fe3O4 in the immobilized bioreactor

A novel biological carrier combining sponge and modified walnut shell biochar with Fe₃O₄ (MWSB@Fe₃O₄) was fabricated to achieve simultaneous removal of nitrate and diethyl phthalate (DEP). The optimal reaction conditions of the immobilized bioreactor were: carbon to nitrogen (C/N) ratio of 1.5, Fe²⁺ concentration of 20 mg L^-1, and hydraulic retention time (HRT) of 8 h. Under the optimal conditions and DEP concentration of 800 μg L^-1, the highest removal efficiency of DEP and nitrate in the immobilized bioreactor with the novel biological carrier were 67.87% and 83.97% (68.43 μg L^-1 h^-1 and 1.71 mg L^-1 h^-1), respectively. Scanning electron microscopy (SEM) showed that the novel biological carrier in this study carried more bio-sediments which is closely related to the denitrification efficiency. The gas chromatography (GC) data showed that the nitrogen production of the immobilized bioreactor (99.85%) was higher than that of another experimental group (97.84%). Fluorescence excitation-emission matrix (EEM) and Fourier transform infrared spectrometer (FTIR) indicated the immobilized bioreactor emerged more extracellular polymeric substances (EPS) which was related to favourable biological stability under the DEP environment. Moreover, according to high-throughput sequencing data, the Zoogloea sp. L2 responsible for iron-reduction and denitrification was the main strain in this immobilized bioreactor.

Enhanced denitrification performance of strain YSF15 by different molecular weight of humic acid: Mechanism based on the biological products and activity

This study aimed to clarify the facilitation by humic acid (HA) fractions (>100, 100-50, 50-30, 30-10, 10-3 and < 3 kDa), as well as their variable effect on denitrification of strain YSF15 under low carbon-nitrogen ratio and nitrate conditions. All HA fractions with 7 mg L^-1 were able to accelerate nitrate removal by strain YSF15 and the role of carbon source was inconspicuous. The molecular weight (MW) < 3 kDa was the best promoter for denitrification, with the efficiency (91.32%) far exceeding the control (43.27%), resulting in more stable oxidation-reduction potential, higher nutrients utilization and electron transport activity, more compact protein structure in extracellular polymeric substances and the production of endogenous HA. Each HA fraction could change the bio-products and denitrification activity of strain YSF15. This study sheds light on the facilitation of HA in denitrification from the perspective of MW, implying the potential effect of HA on denitrifying bacteria in community.

Nutrient Removal Process and Cathodic Microbial Community Composition in Integrated Vertical-Flow Constructed Wetland - Microbial Fuel Cells Filled With Different Substrates

An integrated vertical-flow constructed wetland-microbial fuel cell system (CW-MFC), consisting of an up-flow chamber and a down-flow chamber, was constructed to treat synthetic sewage wastewater. The performance of CW-MFCs filled with different substrates [i.e., ceramsite (CM-A), quartz (CM-B), and zeolite (CM-C) granules] under various hydraulic retention times (HRTs, 7.6, 4.0, and 2.8 d) was evaluated. Efficient and stable nitrogen (N) and phosphorus (P) removals were observed in CM-A under different HRTs, while the voltage outputs of the CW-MFCs was greatly reduced as the HRTs decreased. With an HRT of 2.8 d, the ammonium (NH4 +-N) and orthophosphate (PO4 3--P) removal efficiencies in CM-A were as high as 93.8 and 99.6%, respectively. Bacterial community analysis indicates that the N removal in the cathode area of CM-A could potentially benefit from the appearance of nitrifying bacteria (e.g., Nitrosomonas and Nitrospira) and relatively high abundance of denitrifiers involved in simultaneous nitrification and denitrification (e.g., Hydrogenophaga, Zoogloea, and Dechloromonas) and denitrifying sulfide removal (e.g., Thauera). Additionally, the difference in N removal efficiency among the CW-MFCs could be partly explained by higher iron (Fe) content in milled ceramsite granules and higher abundance of denitrifiers with nitrate reduction and ferrous ions oxidation capabilities in CM-A compared with that in CM-B and CM-C. Efficient PO4 3--P removal in CM-A was mainly ascribed to substrate adsorption and denitrifying phosphorus (P) removal. Concerning the substantial purification performance in CM-A, ceramsite granules could be used to improve the nutrient removal efficiency in integrated vertical-flow CW-MFC.