In situ measurements of viscoelastic properties of biomass during hydrothermal treatment to assess the kinetics of chemical alterations

Cinnamyl alcohol dehydrogenase downregulation in poplar wood increases saccharification after dilute acid pretreatment: a key role for lignin revealed by a multimodal investigation

This study is the first to apply dilute acid pretreatment (DAP) under different severity conditions to poplar wood genetically modified for the cinnamyl alcohol dehydrogenase (CAD1) gene, which is involved in the lignin biosynthesis pathway. The carefully selected pretreatment conditions resulted in glucose yields that were 15 points higher for the hpCAD poplar line than for the wild-type (WT) wood after 48 h of enzymatic hydrolysis. To explain this higher saccharification rate, the chemical, spectral and structural changes in WT and hpCAD wood were analyzed in relation to the severity of the pretreatment process. Although few differences were found at the chemical level, variations in autofluorescence and cell deformation were more significant: at high severity, the cells of hpCAD wood observed by nanotomography were more easily deformed, but their middle lamella was more resistant than those of WT wood. All these differences are possibly explained by changes in the molecular structure of lignin in hpCAD wood, leading to the formation of more hydrophobic shorter monomer chains with fewer lignin‒carbohydrate interactions.

Fermentation of Biomass and Residues from Brazilian Agriculture for 2G Bioethanol Production

Brazil is one of the world's leading producers of staple foods and bioethanol. Lignocellulosic residual sources have been proposed as a promising feedstock for 2G bioethanol and to reduce competition between food and fuels. This work aims to discuss residual biomass from Brazilian agriculture as lignocellulosic feedstock for 2G bioethanol production as bagasse, stalk, stem, and peels, using biorefining concepts to increase ethanol yields. Herein, we focused on biomass chemical characteristics, pretreatment, microorganisms, and optimization of process parameters that define ethanol yields for bench-scale fermentation. Although several techniques, such as carbon capture, linking enzymes to supports, and a consortium of microorganisms, emerge as future alternatives in bioethanol synthesis, these technologies entail necessary optimization efforts before commercial availability. Overcoming these challenges is essential to linking technological innovation to synthesizing environmentally friendly fuels and searching other biomass wastes for 2G bioethanol to increase the biofuel industry's potential. Thus, this work is the first to discuss underutilized lignocellulosic feedstock from other agrifoods beyond sugar cane or corn, such as babassu, tobacco, cassava, orange, cotton, soybean, potatoes, and rice. Residual biomasses combined with optimized pretreatment and mixed fermentation increase hydrolysis efficiency, fermentation, and purification. Therefore, more than a product with a high added value, bioethanol synthesis from Brazilian residual biomass prevents waste production.

Critical review of biochemical pathways to transformation of waste and biomass into bioenergy

In recent years, biofuel or biogas have become the primary source of bio-energy, providing an alternative to conventionally used energy that can meet the growing energy demand for people all over the world while reducing greenhouse gas emissions. Enzyme hydrolysis in bioethanol production is a critical step in obtaining sugars fermented during the final fermentation process. More efficient enzymes are being researched to provide a more cost-effective technique during enzymatic hydrolysis. The exploitation of microbial catabolic biochemical reactions to produce electric energy can be used for complex renewable biomasses and organic wastes in microbial fuel cells. In hydrolysis methods, a variety of diverse enzyme strategies are used to promote efficient bioethanol production from various lignocellulosic biomasses like agricultural wastes, wood feedstocks, and sea algae. This paper investigates the most recent enzyme hydrolysis pathways, microbial fermentation, microbial fuel cells, and anaerobic digestion in the manufacture of bioethanol/bioenergy from lignocellulose biomass.

Principal factors affecting the yield of dilute acid pretreatment of lignocellulosic biomass: A critical review

This review provides a critical analysis of the state of the art of dilute acid pretreatment applied to lignocellulosic biomass. Data from 63 publications were extracted and analysed. The majority of the papers used residence times of<30 min, temperature ranges from 100 °C to 200 °C, and acid levels between 0 % and 2 %. Yields are quantified directly after pretreatment (xylose content) or after enzymatic hydrolysis (glucose content). Statistical analyses allowed the time-temperature equivalence to be quantified for three types of biomass: they were formulated by non-linear expressions. In further works, investigating less explored areas, for example moderate temperature levels with longer residence times, is recommended. Pretreatment material (time-temperature kinetics, reactor type) and analytical methods should be standardized and better described. It becomes mandatory to promote the development of an open, findable, accessible, interoperable, and reusable data approach for pretreatments research.

A validated Distributed Activation Energy Model (DAEM) to predict the chemical degradation of biomass as a function of hydrothermal treatment conditions

This study proposes a DAEM (Distributed Activation Energy Model) approach to predict the chemical alterations of lignocellulosic biomass as a function of hydrothermal treatment conditions. The model is first tuned by an original device allowing the sample shrinkage to be continuously assessed during hydrothermal treatment in saturated water vapor up to 190 °C. The shrinkage dynamic is supplied in the DAEM model as an indicator of the degree of biomass conversion. A set of chemical analyses was performed at selected residence times and treatment temperatures to correlate this degree of conversion with the resulting chemical molecules. A set of functions was then derived from this database to correlate the degree of conversion with the components concentrations. Finally, a validation database was built with different combinations of temperature levels and residence times. The model was proved to be predictive on this new dataset.

Multiscale investigation on the chemical and anatomical changes of lignocellulosic biomass for different severities of hydrothermal treatment

The chemical changes sustained by lignocellulosic biomass during hydrothermal treatment are reflected at multiple scales. This study proposes to benefit from this multiscale nature in order to provide a global understanding of biomass alterations during hydrothermal treatment. For this purpose, complementary imaging techniques-confocal Raman microscopy and X-ray nano-tomography-analysed by image processing and coupled to chemical measurements were used. This unique combination of analyses provided valuable information on topochemical and morphological changes of poplar samples, without the artefacts of sample preparation. At the cell wall level, holocellulose hydrolysis and lignin modifications were observed, which corresponded to anatomical modifications observed at higher scales. Overall, after treatment, samples shrank and had thinner cell walls. When subjected to more severe pre-treatments, cells were disrupted and detached from adjacent cells. Anatomical changes were then used to obtain quantitative indicators of the treatment severity. The effects of treatment at different scales can thus be quantitatively connected in both directions, from micro to macro and from macro to micro.