Enhancement of the biohydrogen production performance from mixed substrate by photo-fermentation: Effects of initial pH and inoculation volume ratio

Maximizing biohydrogen production from watermelon peels using Clostridium butyricum NE133: a statistical optimization approach with Plackett-Burman and Box-Behnken designs

BACKGROUND

Biohydrogen production from agricultural waste is a promising strategy to address climate change and energy challenges. This study aimed to optimize the process parameters for biohydrogen production from watermelon peels (WMP) by Clostridium butyricum NE133 using statistical optimization techniques. Initial screening of eight significant variables influencing hydrogen production including, initial pH, incubation temperature, WMP concentration, inoculum volume, yeast extract, tryptone, sodium acetate, and ammonium acetate concentration was conducted by a Plackett-Burman (PB) design.

RESULTS

The results showed that four variables including, initial pH (P < 0.001), WMP concentration (P < 0.001), sodium acetate (P = 0.023), and ammonium acetate (P = 0.048) had statistically significant effects on hydrogen production. The model curvature (P = 0.040) indicated that it was significant. Box-Behnken (BB) design under response surface methodology (RSM) was employed to optimize the four selected variables to maximize hydrogen production. The optimal conditions for maximizing hydrogen production from WMP by C. butyricum were: initial pH of 8.98, WMP concentration of 44.75%, sodium acetate 4.49 gL-1, and ammonium acetate 1.15 gL-1 at with predicted Hmax of 4703.23 mLL-1. The determination coefficient R2 of the model was 0.9902 with the lack of fit F-value was 1.86.

CONCLUSIONS

The confirmation experiment revealed only a 0.59% difference between the predicted and experimental hydrogen production, indicating that the optimum conditions were actual with the least error. Improvement of about 103.25% in hydrogen production from WMP by C. butyricum NE133 was achieved after the optimization process.

Bioconversion of sterol esters to steroid intermediates through Mycobacterium sp. fermentation

Sterol esters are naturally present in the by-product of edible oil processing, which is generally converted to sterols through saponification. Steroid intermediates play a crucial role in the production of pharmaceuticals, and these intermediates are predominantly synthesized via fermentation of sterol. This research explored the direct conversion of sterol esters into steroid intermediates using Mycobacterium sp. as a fermentation agent. The results demonstrated the successful identification of four steroid intermediates: androstenedione, 1,4-androstadienedione, 22-hydroxy-23,24-bisnorchol-4-ene-3-one, and 22-hydroxy-23,24-bisnorchol-1,4-dien-3-one, their individual intermediate concentrations were as follows: 144.2, 176.2, 30.8, 53.6 mg/L, with a total yield of 404.8 mg/L and a conversion rate of 29.5%. The optimized fermentation conditions included soybean oil at 3%, an initial pH of 7.0, a nitrogen source of 4.5 g/L, and hydroxypropyl-β-cyclodextrin of 15.0 g/L. Proteomic analysis revealed that sterol esters conversion pathway mirrors that of sterol, with an additional hydrolysis process. This work significantly expands our understanding of steroid intermediates production and offers valuable insights for the bioproduction industry.

Recent developments in photo-fermentative hydrogen evolution: Fundamental biochemistry and influencing factors a review

The global shift towards renewable energy sources highlights the urgent need for sustainable hydrogen production, with photo-fermentative hydrogen evolution (PFHP) emerging as a promising solution. This review addresses the challenges and opportunities in optimizing PFHP, specifically the role of photosynthetic bacteria (PBS) in utilizing sunlight for hydrogen production. We focus on the key factors influencing PFHP, including light intensity, reactor design, substrate selection, carbon-to-nitrogen ratio, metal ions, temperature, pH, charge transfer and genetic engineering. Additionally, we explore recent advances in techniques such as immobilization, nanoparticles, biochar, and co-culturing to enhance hydrogen production efficiency. By synthesizing the latest research, this review provides new insights into improving PFHP processes, offering strategies for more efficient biohydrogen production. This work contributes to the development of sustainable hydrogen production technologies, advancing the potential for biohydrogen as a clean energy source.

Use of different dry materials to control the moisture in a black soldier fly (Hermetia illucens) rearing substrate

Background

Controlling the substrate moisture is a significant challenge in black soldier fly (BSF) farming. Many substrates have a high moisture content, which results in a low BSF biomass and a high mortality. One potential solution involves incorporating dry substrates into the food mix to mitigate the excessive moisture. However, little information about the types and quantities of dry substrates is available.

Methods

Six different dry materials-rice husk (RH), rice bran (RB), rice husk ash (RHA), coconut coir dust (CC), rubberwood sawdust (RSD), and spent coffee grounds (SCGs)-were evaluated by combining with pure minced mixed vegetables in varying proportions (0%, 5%, 10%, 15%, 25%, and 50% by weight). This study encompassed both small-scale and medium-scale experiments to comprehensively assess the effects of the addition of each of these different dry substrates and their quantities on aspects of the development of BSF, such as BSF biomass, larval duration, mortality rates, adult sex ratio, and the moisture removal efficiency of each substrate mixture.

Results

Each dry substrate had specific properties. Although RB emerged as a favorable dry substrate owing to its nutritional content and substantial water-holding capacity, excessive use of RB (>15% by weight) resulted in elevated temperatures and subsequent desiccation of the substrate, potentially leading to larval mortality. In contrast, RH demonstrated the ability to support improved larval duration and growth, permitting its utilization in higher proportions (up to 50%). On the other hand, CC, RHA, and SCG are better suited for inclusion in BSF larval substrates in smaller quantities.

Discussion

Some dry substrates require a pretreatment process to eliminate toxic substances prior to their incorporation into substrate mixtures, such as CC and SCG. A potential alternative solution involves employing a combination of various dry substrates. This approach aims to enhance the substrate moisture control and subsequently improve the BSF rearing performance.

Effect of deep eutectic solvent pretreatment on biohydrogen production from corncob: pretreatment temperature and duration

Deep eutectic solvent pretreatment with different temperatures and durations was applied to corncob to increase hydrogen yield via photo-fermentation. The correlation of composition, enzymatic hydrolysis, and hydrogen production in pretreated corncobs, as well as energy conversion was evaluated. Deep eutectic solvent pretreatment effectively dissolved lignin, retained cellulose, and enhanced both enzymatic hydrolysis and hydrogen production. The maximum cumulative hydrogen yield obtained under a pretreatment condition of 50°C and 12 h was 677.45 mL; this was 2.72 times higher than that of untreated corncob, and the corresponding lignin removal and enzymatic reduction of sugar concentration were 79.15% and 49.83 g/L, respectively; the highest energy conversion efficiency was 12.08%. The hydrogen production delay period was shortened, and the maximum shortening time was 18.9 h. Moreover, the cellulose content in pretreated corncob was positively correlated with both reducing sugar concentration and hydrogen yield and had the strongest influence on hydrogen production.

A mini review on microwave and contemporary based biohydrogen production technologies: a comparison

Hydrogen gas, along with conventional fossil fuels, has been used as a green fuel with enormous potential. Due to the rapid depletion of fossil fuels, a new dimension of hydrogen production technology has arrived to reduce reliance on nonrenewable energy sources. Microwave-based hydrogen production is a more promising and cost-effective technology than other existing green hydrogen production methods such as fermentation and gasification. Microwave heating may be superior to traditional heating due to several advantages such as less power consumption compared to other methods, higher yield, and a higher rate of conversion. Compared to another process for hydrogen production, the microwave-driven process worked efficiently at lower temperatures by providing more than 70% yield. The process of production can be optimized by using properly sized biomass, types of biomass, water flow, temperature, pressure, and reactor size. This method is the most suitable, attractive, and efficient technique for hydrogen production in the presence of a suitable catalyst. Hot spots formed by microwave irradiation would have a substantial impact on the yield and properties of microwave-processed goods. The current techno-economic situation of various technologies for hydrogen production is discussed here, with cost, efficiency, and durability being the most important factors to consider. The present review shows that a cost-competitive hydrogen economy will necessitate continual efforts to increase performance, scale-up, technical prospects, and political backing.

Sustainable biohydrogen production from lignocellulosic biomass sources - metabolic pathways, production enhancement, and challenges

Hydrogen production from biological processes has been hailed as a promising strategy for generating sustainable energy. Fermentative hydrogen production processes such as dark and photofermentation are considered more sustainable and economical than other biological methods such as biophotolysis. However, these methods have constraints such as low hydrogen yield and conversion efficiency, so practical implementations still need to be made. The present review provides an assessment and feasibility of producing biohydrogen through dark and photofermentation techniques utilizing various lignocellulosic biomass wastes as substrates. Furthermore, this review includes information about the strategies to increase the productivity rate of biohydrogen in an eco-friendly and sustainable manner, like integration of dark and photofermentation techniques, pretreatment of biomass, genetic modification of microorganisms, and application of nanoadditives.

Influence of titanate photocatalyst in biohydrogen yield via photo fermentation from corn stover

The effects of three common titanate photocatalysts (TPC) on the photo fermentation biohydrogen production (PFHP) from corn stover were studied in this paper. Compared with CaTiO3 and BaTiO3, the experimental group with the addition of MgTiO3 showed stronger potential for PFHP, the maximum hydrogen yield of 344 mL (68.8 mL/g TS) was obtained at 3 g/L MgTiO3, increased by 48.3%. For CaTiO3, BaTiO3, the optimal amount of addition was 8 and 7 g/L, respectively, in which, the hydrogen yield was 308 and 288 mL (61.6 and 57.6 mL/g TS). TPC addition could shorten the delay period of hydrogen production lower the Oxidation-Reduction Potential (ORP) of fermentation broth, especially MgTiO3 addition, the delayed hydrogen production could be shortened by 33.2% compared with control group, and the ORP could reach the lowest value of -371 mV.

Modeling and optimization of photo-fermentation biohydrogen production from co-substrates basing on response surface methodology and artificial neural network integrated genetic algorithm

The main aim of the present study was to establish a relationship model between bio-hydrogen yield and the key operating parameters affecting photo-fermentation hydrogen production (PFHP) from co-substrates. Central composite design-response surface methodology (CCD-RSM) and artificial neural network-genetic algorithm (ANN-GA) models were used to optimize the hydrogen production performance from co-substrates. Compared to CCD-RSM, the ANN-GA had higher determination coefficient (R² = 0.9785) and lower mean square error (MSE = 9.87), average percentage deviation (APD = 2.72) and error (4.3%), indicating the ANN-GA was more suitable, reliable and accurate in predicting biohydrogen yield from co-substrates by PFHP. The highest biohydrogen yield (99.09 mL/g) predicted by the ANN-GA model at substrate concentration 35.62 g/L, temperature 30.94 °C, initial pH 7.49 and inoculation ratio 32.98 %(v/v), which was 4.20 % higher than the CCD-RSM model (95.10 mL/g).

Ascorbic acid-mediated zero-valent iron enhanced hydrogen production potential of bean dregs and corn stover by photo fermentation

Ascorbic acid was introduced to enhance the performance of zero-valent iron (Fe(0)) in hydrogen production by photo fermentation of bean dregs and corn stover. The highest hydrogen production of 664.0 ± 5.3 mL and hydrogen production rate of 34.6 ± 0.1 mL/h was achieved at 150 mg/L ascorbic acid, which was 10.1% and 11.5% higher than that of 400 mg/L Fe(0) alone. The supplement of ascorbic acid to Fe(0) system accelerated the formation of Fe(Ⅱ) in solution due to its reducing and chelating ability. Hydrogen production of Fe(0) and ascorbic acid-Fe(0) (AA-Fe(0)) systems at different initial pH (5, 6, 7, 8 and 9) was studied. Result showed that hydrogen produced from AA-Fe(0) system was improved by 2.7-27.5% compared with Fe(0) system. The maximum hydrogen production of 767.5 ± 2.8 mL was achieved with initial pH 9 in the AA-Fe(0) system. This study provided a strategy for enhancing biohydrogen production.

Processing of Biomass Prior to Hydrogen Fermentation and Post-Fermentative Broth Management

Using bioconversion and simultaneous value-added product generation requires purification of the gaseous and the liquid streams before, during, and after the bioconversion process. The effect of diversified process parameters on the efficiency of biohydrogen generation via biological processes is a broad object of research. Biomass-based raw materials are often applied in investigations regarding biohydrogen generation using dark fermentation and photo fermentation microorganisms. The literature lacks information regarding model mixtures of lignocellulose and starch-based biomass, while the research is carried out based on a single type of raw material. The utilization of lignocellulosic and starch biomasses as the substrates for bioconversion processes requires the decomposition of lignocellulosic polymers into hexoses and pentoses. Among the components of lignocelluloses, mainly lignin is responsible for biomass recalcitrance. The natural carbohydrate-lignin shields must be disrupted to enable lignin removal before biomass hydrolysis and fermentation. The matrix of chemical compounds resulting from this kind of pretreatment may significantly affect the efficiency of biotransformation processes. Therefore, the actual state of knowledge on the factors affecting the culture of dark fermentation and photo fermentation microorganisms and their adaptation to fermentation of hydrolysates obtained from biomass requires to be monitored and a state of the art regarding this topic shall become a contribution to the field of bioconversion processes and the management of liquid streams after fermentation. The future research direction should be recognized as striving to simplification of the procedure, applying the assumptions of the circular economy and the responsible generation of liquid and gas streams that can be used and purified without large energy expenditure. The optimization of pre-treatment steps is crucial for the latter stages of the procedure.

1-Butyl-3-methylimidazolium acetate pretreatment of giant reed triggering yield improvement of biohydrogen production via photo-fermentation

Ionic liquids (ILs) have been considered as promising alternatives to traditional reagent for lignocellulosic biomass pretreatment because of their tunable physicochemical and "green" properties. In the study, the influence of 1-Butyl-3-methylimidazolium acetate ([Bmim]acetate) pretreatment of giant reed on H2 yield improvement via photo-fermentation (PF) was evaluated. Under the optimal pretreatment conditions (6 g/L [Bmim]acetate at 70 °C for 4 h), the delignification of giant reed was up to 26.7 %. In addition, the sugar yield (9.5 g/L) and hydrogen yield (72.3 mL/g TS) from giant reed were enhanced by 1.7-fold and 61.7 % over those of untreated giant reed, respectively. Moreover, ternary analysis showed that retention time had the strongest effect on delignification, sugar yield and hydrogen yield of giant reed compared to pretreatment temperature and [Bmim]acetate loading. These experimental results indicated that [Bmim]acetate pretreatment of giant reed is an effective approach to enhance the hydrogen yield via PF.

Surfactant assisted microwave irradiation pretreatment of corncob: Effect on hydrogen production capacity, energy consumption and physiochemical structure

The combination pretreatment strategy is an effective way to intensify photo-fermentative biohydrogen production (PFHP) process. In this study, the synergistic effects of microwave irradiation and surfactants on the hydrogen production performance, energy analysis and structural characteristics was evaluated. Results revealed that hydrogen production performance was improved after microwave irradiation pretreatment (MIP) and surfactants assisted microwave irradiation pretreatment (SMIP). SMIP group had a higher cumulative hydrogen yield (CHY) of 367.87 ± 6.481 mL compared with control group (223.26 ± 4.329 mL) and MIP group (303.66 ± 3.366 mL), which was an increase of 36.01% and 64.77%, respectively. Energy evaluation analysis showed that the energy ratio of SMIP (0.49) was higher than that of MIP (0.37) in the PFHP system, therefore, SMIP can save more energy. After SMIP, the corncob lignocellulose structure was greatly damaged, which was verified by SEM, FTIR, XRD and XPS analyses.

Pretreatment of corn stover by torrefaction for improving reducing sugar and biohydrogen production

The torrefaction pretreatment technology with different temperature varying from 160℃ to 240℃ was utilized to enhance the enzymatic saccharification and hydrogen production potential of corn stover. The composition characteristics, Crystal Intensity (CrI), reducing sugars yield and hydrogen production of the pretreated corn stover were detected to explore the torrefaction pretreatment effectiveness. Results revealed that the reducing sugar yield and hydrogen production from corn stover were improved significantly through torrefaction pretreatment, both the maximum reducing sugar yield of 427.86 ± 19 mg/g Total solid(TS) and hydrogen yield of 123.72 mL/g TS were obtained at 200 ℃, increased by 46.41% and 70.79%, respectively. The kinetic parameters from Gompertz model showed torrefaction pretreatment could shorten the lag phase time of enzymatic saccharification and hydrogen production. The reducing sugar data can be fitted well by fractal-like kinetic model and Gompertz model.

Effect of 5-HMF and furfural additives on bio-hydrogen production by photo-fermentation from giant reed

Substances harmful to photo-fermentative biological hydrogen production (PFHP) were produced during cellulose hydrolysis. This study aimed to evaluate the effect of by-products (5-hydroxymethylfurfural (5-HMF) and furfural) released from lignocellulose during enzymatic hydrolysis process on PFHP. The exist of 5-HMF inhibited the hydrogen production. However, 0.2 g/L furfural improved the hydrogen production by 19 % compared to no addition (511.6 mL) with a maximum concentration of nitrogenase (109.96 IU/L) at 96 h. Furthermore, a 18.7 % enhancement of hydrogen production was also observed when 0.2 g/L 5-HMF and furfural were mixed at a ratio of 1:1, while decrement of hydrogen production at higher addition was observed as well. Through the scatter matrix analysis, it was concluded that 5-HMF and furfural additives had significant effects on PFHP. This study gave an insight into effect of lignocellulosic by-products on biohydrogen production.

Forecasting of reducing sugar yield from corncob after ultrafine grinding pretreatment based on GM(1,N) method and evaluation of biohydrogen production potential

Pretreatment of biomass helps to enhance reducing sugar yield from biomass during enzyme hydrolysis tests. Ultrafine grinding was applied to pretreat corncob. The effect of affecting factors including milling time, initial particle size and ball to power weight on the reducing sugar yield from corncob was investigated firstly. And then, an GM(1,N) model was constructed to model the ultrafine grinding pretreatment system predicting the reducing sugar yield from corncob based on experimental data, the results demonstrate GM(1,N) could predict the reducing sugar yield accurately and effectively without depending on the number of samples. The initial particle size was the most critical influential factor affecting reducing sugar yield according to the driving coefficient. The cumulative hydrogen yield was significantly affected by ultrafine grinding pretreatment, the hydrogen yield of pretreated corncob was 153.60 ± 5.8 mL/g total solids, which was higher than that of untreated corncob (113.20 ± 3.2 mL/g total solids).

Enhancing photo-fermentation biohydrogen production from corn stalk by iron ion

This study aimed to investigate the enhancement of iron ion on growth, metabolic pathway, and biohydrogen production performance of biohydrogen producing bacteria HAU-M1. Different concentrations of Fe²⁺ and Fe³⁺ were respectively added into fermentation broth of photo-fermentation biohydrogen production (PFHP) from corn stalk. Regular sampling test was used to measure the characteristics of fermentation broth and gas, metabolic pathway, energy conversion efficiency, and kinetic of PFHP. The analysis of experimental data showed that the maximum hydrogen yield of 70.25 mL/g was observed at 2500 μmol/L Fe²⁺ addition, with an energy conversion efficiency of 5.21%, which was 19.98% higher over no-addition. However, the maximum hydrogen content of 51.41% and the maximum hydrogen production rate of 17.82 mL/h were observed at 2000 μmol/L Fe²⁺ addition. The experimental results revealed that iron ion played a key role in PFHP, which provided a technical support for improving the performance of PFHP.

Analysis of the characteristics of paulownia lignocellulose and hydrogen production potential via photo fermentation

Paulownia biomass is rich in carbohydrates, making which a potential feedstock for biohydrogen production. In the study, different parts and varieties of Paulownia were chose as substrates to evaluate hydrogen production potential of paulownia lignocellulose via biohydrogen production by photo fermentation (BHPPF) and energy conversion efficiency (ECE). Results showed the highest cumulative hydrogen yield (CHY) of 67.11 mL/g total solids (TS) and ECE of 4.74% were obtained from leaves of Paulownia, which were 121.06% and 115.45% higher than those of the branches. Moreover, Paulownia jianshiensis leaves were found to be the best variety for BHPPF, with the maximum CHY of 98.83 mL/g TS and ECE of 7.18%. Using Paulownia waste as the substrate to produce hydrogen helps broaden the range of raw materials for BHPPF and improve the economic utilization of forestry waste.

Photo-fermentative biohydrogen production from corncob treated by microwave irradiation

The complex structure of corncob is the bottleneck that restricts its efficient biohydrogen production. Hence, effective treatment is an important exploration to break this limitation. The effect of microwave irradiation (MI) on photo-fermentative biohydrogen production (PFHP) process was evaluated in this paper. Diverse conditions (irradiation time, microwave power, and surfactant addition) were applied. Comparisons of cumulative hydrogen yield (CHY), microstructure, liquid products, and substrate conversion efficiency (S_conv) were conducted. Results showed that the highest CHY of 27.34 ± 1.13 mL/g TS was achieved when the corncob was treated by MI assisted with surfactant addition. Optimal treatment conditions (5.51 min irradiation time, 772.03 W microwave power, and 0.08 g/L rhamnolipids addition) were obtained. MI assisted with surfactant addition helped with the structure destroys and content degradation, displaying a great improves on PFHP. Lower ethanol content and higher butyric acid content were obtained. An 80.94% increase in CHY and S_conv of 90.44% were obtained than untreated corncob.

Tolerance of photo-fermentative biohydrogen production system amended with biochar and nanoscale zero-valent iron to acidic environment

Anaerobic fermentation system is easy to become acidic due to the generation of small molecular acids, which will affect the metabolism of bacteria. Therefore, it is necessary to improve the acid resistance of system. In this work, the tolerance of photo-fermentative biohydrogen production system amended with biochar, nanoscale zero-valent iron (nZVI) and biochar + nZVI to acidic environment was studied. Results showed that additives improved the stability and performance of the photo fermentation. The best increment of biohydrogen from 0 to 286.83 ± 2.77 mL was obtained by adding biochar and nZVI together at the original pH of 4.5. The additive reduced the oxidation-reduction potential and promoted the consumption of acetate and butyrate. At initial pH of 5, 6 and 7, the highest biohydrogen yield of 361.02 ± 10.11, 419.36 ± 10.70 and 382.67 ± 25.08 mL was obtained by adding nZVI, respectively, representing 42%-44.45% increase compared with the control group under the same conditions.

Continuous dark and photo biohydrogen production in a baffled bioreactor and electrons distribution analysis

This work studied the sequential hydrogen production by dark and photo-fermentation (HPDPF) in continuous baffled bioreactors. Taken enzymatic hydrolysate of corn stover as initial carbon source, the influence of hydraulic retention time (HRT) of dark fermentation (DF) and the dilution ratio (DR) of dark fermentation effluents (DFEs) on the hydrogen production performance of the combined fermentation system and electron distribution were investigated. For DF unit, the highest hydrogen production rate (HPR) of 5.24 L/(L·d) was detected at HRT of 18 h, however, the maximum HPR of 4.60 L/(L·d) was obtained from DFEs with HRT of 12 h and DR of 1:0.5 during photo fermentation unit, meanwhile, the electrons in substrate partitioning to H₂ reached the maximum value of 35.69%. In terms of hydrogen yield, the optimum operating conditions of the combined system were HRT of 12 h (DF) and DR of 1:0.5(DFEs), in which the hydrogen yield reached 12.73 L/d.

Study of the interrelationship between nano-TiO2 addition and photo-fermentative bio-hydrogen production of corn straw

This study explored the interrelationship between nano-TiO₂ addition and photo-fermentative hydrogen production (PFHP) of corn straw. The maximum cumulative hydrogen volume (CHV) was up to 688.8 mL under the optimal photo-fermentative process conditions with nano-TiO₂ addition of 300 mg/L. Initial pH and interaction between substrate concentration and light intensity had highly significant effects on PFHP of corn straw with nano-TiO₂ addition. With the improvement of CHV, nano-TiO₂ addition decreased the optimal initial pH and substrate concentration for PFHP of corn straw. Moreover, nano-TiO₂ addition promoted the metabolism of butyric acid and acetic acid by photosynthetic bacteria HAU-M1, and significantly reduced the total concentration of intermediate byproducts during hydrogen production to a low level of 1.6-2.5 g/L, thus making the CHV, maximum hydrogen production rate (HPR) and average hydrogen content (HC) increased by 32.6%, 27.9% and 8.3% respectively over the control without nano-TiO₂ addition.

Bioengineered bioreactors: a review on enhancing biomethane and biohydrogen production by CFD modeling

Computational fluid dynamics (CFD) is numerical strategy developed for simulating the behavior of liquid and gas flow. CFD may be applied starting from aerospace, engine design, vehicle aerodynamics, power plants and chemical industries for analyzing and solving relevant system design and process issues. Biogas produced during anaerobic digestion (AD) is sustainable and renewable alternative to fossil fuels. AD may improve the controlled production of biogas and offers significant environmental benefits. This review focuses on research outcomes relevant for enhanced biogas production by exploring the possible applications of CFD in AD technology. CFD-related research performed in AD conditions in order to improve mixing performance, reduce power consumption, and understand the effects of total solid (TS) concentrations on flow behavior have been discussed. In addition, the use of AD for bio-hydrogen production, wastewater treatment, and sludge treatment are looked in. This review also identifies novel areas for AD technology advancement where there is potential for economic improvement in renewable energy production. Finally, future research needs have been identified, focusing on the opportunities to integrate conceptual and mathematical models for advancing CFD simulations for bioenergy.

Role of surfactant in affecting photo-fermentative bio-hydrogen production performance from corncob

Surfactant addition can cause a significant change in the interface state of the solution system, which is helpful to avoid agglomeration and sedimentation of solid state, and improve the mass transfer capacity. Hence, the performance of high-solid photo-fermentative bio-hydrogen production system with bio-surfactant addition was evaluated in this work. Corncob was selected as raw material, and cumulative hydrogen yield (CHY) was taken as reference. The effect of Rhamnolipids (RLs) and Tea Saponin (TSn) addition on hydrogen yield capacity was investigated. The results showed that CHY was effectively increased by the addition of RLs and TSn, the highest CHY of 356.42 ± 16.5 mL and 265.38 ± 7.5 mL appeared when the concentrations of surfactant addition were 0.08 g/L RLs and 1.5 g/L TSn, which were 67.85% and 24.97% higher than control group, respectively. The maximum energy conversion efficiency reached 5.47% and 4.08% with an increase of 67.8% and 25.2%.

Main Hydrogen Production Processes: An Overview

Due to its characteristics, hydrogen is considered the energy carrier of the future. Its use as a fuel generates reduced pollution, as if burned it almost exclusively produces water vapor. Hydrogen can be produced from numerous sources, both of fossil and renewable origin, and with as many production processes, which can use renewable or non-renewable energy sources. To achieve carbon neutrality, the sources must necessarily be renewable, and the production processes themselves must use renewable energy sources. In this review article the main characteristics of the most used hydrogen production methods are summarized, mainly focusing on renewable feedstocks, furthermore a series of relevant articles published in the last year, are reviewed. The production methods are grouped according to the type of energy they use; and at the end of each section the strengths and limitations of the processes are highlighted. The conclusions compare the main characteristics of the production processes studied and contextualize their possible use.

Effect of zinc ion on photo-fermentative hydrogen production performance, kinetics and electronic distribution in biohydrogen production by HAU-M1

The aim of this work was to study the characteristics, kinetics and electronic distribution of photo-fermentation hydrogen production (PFHP) with Zn²⁺ addition then gave the main results that the addition of Zn²⁺ can effectively improve hydrogen production with an increasing of 1-5 mg/L Zn²⁺ concentration. The maximum hydrogen yield of 592 ± 13 mL and shortest lag time of 4.67 h were obtained at 2 mg/L Zn²⁺. 26.42% of the substrate energy was diverted to H₂. Modified Gompertz and Hane-Levenspiel models were applied to evaluate the effect of Zn²⁺ on PFHP by mixed bacteria HAU-M1, the constants n and m obtained by fitting models were 14.97 and 58.79, respectively, indicating the fermentation system was noncompetitive inhibition, the predicted critical Zn²⁺ concentration was 40.83 mg/L.