Renewable hydrogen production from biomass and wastes (ReBioH2-2020)

Exogenous MgH2-derived hydrogen alleviates cadmium toxicity through m6A RNA methylation in rice

Cadmium (Cd) contamination poses a substantial threat to crop yields and human health. While magnesium hydride (MgH2) has been reported as a hydrogen (H2) donor that promotes plant growth under heavy metal contamination, its role in rice remains elusive. Herein, seedlings of Oryza sativa L. Japonica variety Zhonghua 11 (ZH11) were selected and exposed to 20 µL of 1-mol/L cadmium chloride (CdCl2) solution via hydroponics to simulate Cd stress. Meanwhile, 0.1 mg of MgH2 was used to slow-release H2 to the experimental group to explore its potential effects on rice over a 2-week period. The results indicated that Cd exposure severely inhibited the growth and development of ZH11 rice seedlings. However, the exogenous slow-release of H2 from MgH2 effectively mitigated this inhibitory effect by restoring the balance of reactive oxygen species (ROS), maintaining endogenous H2 homeostasis, and supporting the photosynthetic system. High-performance liquid chromatography analysis revealed that exogenous H2 reduces m6A RNA methylation levels in mRNA under Cd stress. Consequently, MeRIP-seq was conducted to investigate the effect of Cd exposure in rice in the presence and absence of H2. The m6A modifications were enriched at the start codon, stop codon, and 3' UTR. By integrating RNA-seq data, 118 transcripts were identified as differentially methylated and expressed genes under Cd stress. These gene annotations were associated with ROS, biological stress, and hormonal responses. Notably, 297 differentially methylated and expressed genes were identified under Cd stress in the presence of H2, linked to heavy metals, protein kinases, and calcium signaling regulation. Cd strongly activates the MAPK pathway in response to stress. Exogenous H2 reduces Cd accumulation as well as enhances plant tolerance and homeostasis by lowering m6A levels, thereby decreasing the mRNA stability of these genes. Our findings indicate that MgH2, by supplying H2, regulates gene expression through m6A RNA methylation and confers Cd tolerance in rice. This study provides potential candidate genes for studying the remediation of heavy metal pollution in plants.

Biohydrogen from waste feedstocks: An energy opportunity for decarbonization in developing countries

In developing economies, the decarbonization of energy sector has become a global priority for sustainable and cleaner energy system. Biohydrogen production from renewable sources of waste biomass is a good source of energy incentive that reduces the pollution. Biohydrogen has a high calorific value and emits no emissions, producing both energy security and environmental sustainability. Biohydrogen production technologies have become one of the main renewable sources of energy. The present paper entails the role of biohydrogen recovered from waste biomasses like agricultural waste (AW), organic fraction of municipal solid waste (OFMSW), food processing industrial waste (FPIW), and sewage sludge (SS) as a promising solution. The main sources of increasing yield percentage of biohydrogen generation from waste feedstock using different technologies, and process parameters are also emphasized in this review. The production paths for biohydrogen are presented in this review article, and because of advancements in R and D, biohydrogen has gained viability as a biofuel for the future and discusses potential applications in power generation, transportation, and industrial processes, emphasizing the versatility and potential for integration into existing energy infrastructure. The investigation of different biochemical technologies and methods for producing biohydrogen, including anaerobic digestion (AD), dark fermentation (DF), photo fermentation (PF), and integrated dark-photo fermentation (IDPF), has been overviewed. This analysis also discusses future research, investment, and sustainable energy options transitioning towards a low-carbon future, as well as potential problems, economic impediments, and policy-related issues with the deployment of biohydrogen in emerging nations.

Harnessing recalcitrant lignocellulosic biomass for enhanced biohydrogen production: Recent advances, challenges, and future perspective

Biohydrogen (Bio-H2) is widely recognized as a sustainable and environmentally friendly energy source, devoid of any detrimental impact on the environment. Lignocellulosic biomass (LB) is a readily accessible and plentiful source material that can be effectively employed as a cost-effective and sustainable substrate for Bio-H2 production. Despite the numerous challenges, the ongoing progress in LB pretreatment technology, microbial fermentation, and the integration of molecular biology techniques have the potential to enhance Bio-H2 productivity and yield. Consequently, this technology exhibits efficiency and the capacity to meet the future energy demands associated with the valorization of recalcitrant biomass. To date, several pretreatment approaches have been investigated in order to improve the digestibility of feedstock. Nevertheless, there has been a lack of comprehensive systematic studies examining the effectiveness of pretreatment methods in enhancing Bio-H2 production through dark fermentation. Additionally, there is a dearth of economic feasibility evaluations pertaining to this area of research. Thus, this review has conducted comparative studies on the technological and economic viability of current pretreatment methods. It has also examined the potential of these pretreatments in terms of carbon neutrality and circular economy principles. This review paves the way for a new opportunity to enhance Bio-H2 production with technological approaches.

Production of carbon monoxide and hydrogen from methanol using a ruthenium pincer complex: a DFT study

To understand the mechanism of the dehydrogenation of methanol to CO and H2 catalyzed by a ruthenium pincer complex, a density functional theory (DFT) study has been conducted on two different cycles which differ in the substances entering the cycle (methanol (cycle 1) versus methoxymethanol (cycle 2)). Our calculated results show that both cycles consist of three stages: dehydrogenation of alcohol to aldehyde (stage I); hydrogen formation (stage II); and decarbonylation with the regeneration of the catalyst (stage III). The energy barriers of the rate-determining steps for cycles 1 and 2 are 49.6 and 28.5 kcal mol-1, respectively. Thus cycle 2 is more energetically feasible. For stage III of cycle 2, our results did not support the mechanism proposed in the experiment (CO release occurs prior to decarbonylation). Instead, we suggested and examined an alternative pathway, that is, decarbonylation occurs prior to CO release. The mechanistic insights gained in the present paper could be beneficial for further designing of these kinds of reactions.

Microbial co-cultures for biochemicals production from lignocellulosic biomass: A review

Global reliance on fossil oil should shift to cleaner alternatives to get a decarbonized society. One option to achieve this ambitious goal is the use of biochemicals produced from lignocellulosic biomass (LCB). The inherent low biodegradability of LCB and the inhibitory compounds that might be released during pretreatment are two main challenges for LCB valorization. At microbiological level, constraints are mostly linked to the need for axenic cultures and the preference for certain carbon sources (i.e., glucose). To cope with these issues, this review focuses on efficient LCB conversion via the sugar platform as well as an innovative carboxylate platform taking advantage of the co-cultivation of microorganisms. This review discusses novel trends in the use of microbial communities and co-cultures aiming at different bioproducts co-generation in single reactors as well as in sequential bioprocess combination. The outlook and further perspectives of these alternatives have been outlined for future successful development.

Depolymerization of lignin: Recent progress towards value-added chemicals and biohydrogen production

The need for alternative sources of energy became increasingly urgent as demand for energy and the use of fossil fuels both soared. When processed into aromatic compounds, lignin can be utilized as an alternative to fossil fuels, however, lignin's complex structure and recalcitrance make depolymerization impractical. This article presented an overview of the most recent advances in lignin conversion, including process technology, catalyst advancement, and case study-based end products. In addition to the three established methods (thermochemical, biochemical, and catalytic depolymerization), a lignin-first strategy was presented. Depolymerizing different forms of lignin into smaller phenolic molecules has been suggested using homogeneous and heterogeneous catalysts for oxidation or reduction. Limitations and future prospects of lignin depolymerization have been discussed which suggests that solar-driven catalytic depolymerization through photocatalysts including quantum dots offers a unique pathway to obtain the highly catalytic conversion of lignin.

Advances in the catalyzed photo-fermentative biohydrogen production through photo nanocatalysts with the potential of selectivity, and customization

Photo nanocatalyst have shownpromise in a variety of fields, including biohydrogen production where their catalytic efficiency is related to size, surface-to-volume ratio, and increasing the number of atoms on the surface. They can harvest solar light to create electron-hole pairs which is the key mechanism to define its catalytic efficiency, thus requiring suitable excitation wavelength, band energy, and crystal imperfections. In this review, a discussion on the role of photo nanocatalysts to catalyze biohydrogen production has been carried out. Photo nanocatalysts feature a large bandgap, andhigh defect concentration, thus having the ability to be tuned for their characteristics. Customization of the photo nanocatalyst has been addressed. Mechanism of the photo nanocatalysts in catalyzing biohydrogen has been discussed. Limiting factors of photo nanocatalysts were highlighted and several recommendations have been made to enhance the effective utilization of these photo nanocatalysts to enhance photo-fermentative biohydrogen production from biomass wastes.

Production of nanocellulose from corn husk for the development of antimicrobial biodegradable packaging film

Packaging is a potential way of keeping food products safe from various environmental pollutants, and biological, chemical, & physical deterioration. Hence, the demand for an effective antimicrobial active packaging material is increasing tremendously to improve the shelf-life of food products. Thus, we extracted nanocellulose from corn husks and developed a eugenol-incorporated biodegradable antimicrobial active packaging film. The extracted nanocellulose showed a particle size of 149.67 ± 3.56 nm and an overall surface charge of -20.2 mV ± 0.76 V. The film casting method is one of the promising methods to fabricate biodegradable films using plant-based biopolymers. Therefore, different concentrations of eugenol (0.5-5 % v/v) were incorporated to formulate the functional film (FF0.5-FF5) by employing the casting process. FF exhibited comparable tensile strength as compared to the control film (CF), however, FF5 showed the least tensile strength (85 MPa). Based on the mechanical characterization, the FF3 film sample was further selected for characterization. The morphological evaluation revealed that the surface of the film was smooth and non-porous with reduced moisture content and density. The film exhibited high thermal stability as the degradation occurred above 400 °C, indicating the strong hydrogen bonding between the hydroxyl groups of the film. The Fourier transform infrared spectroscopy analysis revealed the existence of COOH vibration and COC stretching groups of cellulose and eugenol. The antimicrobial studies showed high efficacy against Staphylococcus aureus followed by Salmonella typhmurium, Pseudomonas aeruginosa, and Klebsiella pneumoniae bacteria. Overall, eugenol-incorporated nanocellulose-based biodegradable packaging film could be an excellent candidate as an alternative to active packaging material and provide an opportunity for the efficient utilization of corn husk.

Biochemical hydrogen potential assay for predicting the patterns of the kinetics of semi-continuous dark fermentation

The performance and kinetics response of thermophilic semi-continuous dark fermentation (DF) of simulated complex carbohydrate-rich waste was investigated at various hydraulic retention times (HRT) (2, 2.5, and 3 d) and compared with data obtained from biochemical hydrogen potential assay (BHP). A culture of Thermoanaerobacterium thermosaccharolyticum was used as the inoculum and dominated both in BHP and semi-continuous reactor. Both the modified Gompertz and first-order models described the DF kinetics well (R² = 0.97-1.00). HRT of 2.5 d was found to be optimal in terms of maximum hydrogen production rate and hydrogen potential, which were 3.97 and 1.26 times higher, respectively, than in BHP. The hydrolysis constant was highest at HRT of 3 d and was closest to the value obtained in the BHP. Overall, BHP has been shown to be a useful tool for predicting H₂ potential and the hydrolysis constant, while the maximum H₂ production rate is greatly underestimated.

A comprehensive review on the biological conversion of lignocellulosic biomass into hydrogen: Pretreatment strategy, technology advances and perspectives

The globe has dependent on energy generation and utilization for many years; conversely, ecological concerns constrained the world to view hydrogen as an alternative for economic development. Lignocellulosic biomass is broadly accessible as a low-cost renewable feedstock and nonreactive nature; it has received a lot of consideration as a global energy source and the most attractive alternative to replace fossil natural substances for energy production. Pretreatment of lignocellulosic biomass is essential to advance its fragmentation and lower the lignin content for sustainable energy generation. This review's goal is to provide the different pretreatment strategies for enlarging the solubility and surface area of lignocellulosic biomass. The biological conversion of lignocellulosic biomass to hydrogen was reviewed and operational conditions and enhancing methods were discussed. This review summarizes the working conditions, parameters, yield percentages, techno-economic analysis, challenges, and future recommendations on the direct conversion of biomass to hydrogen.

Biohydrogen production using algae: Potentiality, economics and challenges

The biohydrogen production from algal biomass could ensure hydrogen's sustainability as a fuel option at the industrial level. However, some bottlenecks still need to be overcome to achieve the process's economic feasibility. This review article highlights the potential of algal biomasses for producing hydrogen with a detailed explanation of various mechanisms and enzymes involved in the production processes. Further, it discusses the impact of various experimental parameters on biohydrogen production. This article also analyses the significant challenges confronted during the overall biohydrogen production process and comprehends the recent strategies adopted to enhance hydrogen productivity. Furthermore, it gives a perception of the economic sustenance of the process. Moreover, this review elucidates the future scope of this technology and delineates the approaches to ensure the viability of hydrogen production.

Enhancing biohydrogen production from lignocellulosic biomass of Paulownia waste by charge facilitation in Zn doped SnO2 nanocatalysts

The goal of this research was to study the role of excess charges in regulating biohydrogen production from Paulownia. The excess charges were generated through charge compensation in SnO₂ nanocatalysts by Zn doping. The maximum hydrogen yield of 335 mL was observed at 8%Zn doping with a concentration of 150 mg/L, 47% higher as compared to standard sample. It was observed that the hydrogen production rate increased with Zn doping and the highest value (77 mL/h) was observed for 8%Zn at 24 h. The decrease in the total amount of byproducts (2.52 g/L from 4.28 g/L) at 8% Zn indicates an increase in bacterial metabolism. The lowest value of oxidation-reduction potential (-525 mV) at 24 h for 8%Zn confirms that Zn doping provides excessive electrons to the fermentative medium which helps the bacteria to transfer electrons faster during the redox reaction, hence, enhancing the enzymatic process and eventually hydrogen production.

Prediction of product yields using fusion model from Co-pyrolysis of biomass and coal

This study aimed to establish a self-corrective machine learning model base on co-pyrolysis data of biomass and coal. Proximate and ultimate analysis of raw materials were chosen as input parameters. Radial basis function (RBF), support vector machine (SVM), and random forest (RF) were used to build the base regression models for the fusion (FU) model. 96 sets of the experimental data were applied to train and test the base models. A learning weight were then determined by the predicted performance of base models. Based on the learning weight method, FU model spontaneously regulated and controlled the weight of base models to output the predicted result of co-pyrolysis products. The coefficient of determination (R²) was more than 0.99 and the root-mean-squared error (RMSE) was lower than 0.88%. The results suggested that FU model was more accurately adequate to forecast the yields of co-pyrolysis products than any of the base models.

Residential Fuel Transition and Fuel Interchangeability in Current Self-Aspirating Combustion Applications: Historical Development and Future Expectations

To reduce greenhouse gases and air pollutants, new technologies are emerging to reduce fossil fuel usage and to adopt more renewable energy sources. As the major aspects of fuel consumption, power generation, transportation, and industrial applications have been given significant attention. The past few decades witnessed astonishing technological advancement in these energy sectors. In contrast, the residential sector has had relatively little attention despite its significant utilization of fuels for a much longer period. However, almost every energy transition in human history was initiated by the residential sector. For example, the transition from fuelwood to cheap coal in the 1700s first took place in residential houses due to urbanization and industrialization. The present review demonstrates the energy transitions in the residential sector during the past two centuries while portending an upcoming energy transition and future energy structure for the residential sector. The feasibility of the 100% electrification of residential buildings is discussed based on current residential appliance adoption, and the analysis indicates a hybrid residential energy structure is preferred over depending on a single energy source. Technical considerations and suggestions are given to help incorporate more renewable energy into the residential fuel supply system. Finally, it is observed that, compared to the numerous regulations on large energy-consumption aspects, standards for residential appliances are scarce. Therefore, it is concluded that establishing appropriate testing methods is a critical enabling step to facilitate the adoption of renewable fuels in future appliances.

Design and Development of a Catalytic Fixed-Bed Reactor for Gasification of Banana Biomass in Hydrogen Production

Hydrogen produced from biomass is an alternative energy source to fossil fuels. In this study, hydrogen production by gasification of the banana plant is proposed. A fixed-bed catalytic reactor was designed considering fluidization conditions and a height/diameter ratio of 3/1. Experimentation was carried out under the following conditions: 368 °C, atmospheric pressure, 11.75 g of residual mass of the banana (pseudo-stem), an average particle diameter of 1.84 mm, and superheated water vapor as a gasifying agent. Gasification reactions were performed using a catalyzed and uncatalyzed medium to compare the effectiveness of each case. The catalyst was Ni/Al2O3, synthesized by coprecipitation. The gas mixture produced from the reaction was continuously condensed to form a two-phase liquid–gas system. The synthesis gas was passed through a silica gel filter and analyzed online by gas chromatography. To conclude, the results of this study show production of 178 mg of synthesis gas for every 1 g of biomass and the selectivity of hydrogen to be 51.8 mol% when a Ni 2.5% w/w catalyst was used. The amount of CO2 was halved, and CO was reduced from 3.87% to 0% in molar percentage. Lastly, a simulation of the distribution of temperatures inside the furnace was developed; the modeled behavior is in agreement with experimental observations.

Effect of 5-HMF and furfural additives on bio-hydrogen production by photo-fermentation from giant reed

Substances harmful to photo-fermentative biological hydrogen production (PFHP) were produced during cellulose hydrolysis. This study aimed to evaluate the effect of by-products (5-hydroxymethylfurfural (5-HMF) and furfural) released from lignocellulose during enzymatic hydrolysis process on PFHP. The exist of 5-HMF inhibited the hydrogen production. However, 0.2 g/L furfural improved the hydrogen production by 19 % compared to no addition (511.6 mL) with a maximum concentration of nitrogenase (109.96 IU/L) at 96 h. Furthermore, a 18.7 % enhancement of hydrogen production was also observed when 0.2 g/L 5-HMF and furfural were mixed at a ratio of 1:1, while decrement of hydrogen production at higher addition was observed as well. Through the scatter matrix analysis, it was concluded that 5-HMF and furfural additives had significant effects on PFHP. This study gave an insight into effect of lignocellulosic by-products on biohydrogen production.

Effect of genus Clostridium abundance on mixed-culture fermentation converting food waste into biohydrogen

This study examined the effect of various inocula on mixed-culture dark fermentative H₂ production from food waste. Heat-treated and frozen H₂-producing granular sludge (HPG) grown with monomeric sugars showed a higher H₂ yield, production rate, and acidogenic efficiency along with a shorter lag phase than heat-treated methanogenic sludge. Among three different methods of methanogenic sludge inoculation, inoculation after centrifugation showed better H₂ production performance. Propionic acid production and homoacetogenesis were regarded as major H₂-consuming pathways when methanogenic sludge was used, whereas only homoacetogenesis was found in HPG-inoculated fermentation. During fermentation, the abundance of Clostridium increased greater than 48-fold for methanogenic sludge and greater than 108-fold for HPG, respectively. The initial abundance of Clostridium showed a linear relationship with the H₂ production rate and lag-phase time. The use of inoculum with a high abundance of Clostridium is essential for H₂ production from food waste.