Effectively stimulating partial denitrification to utilize dissolved slowly-biodegradable organic matter by introducing in-situ biosorption and hydrolytic acidification

From acetate-driven partial denitrification (PD) to N-Methylpyrrolidone-driven PD: Microbial community, metabolic pathway and functional genes

With the rapid development of the new energy industry, the wastewater discharged from battery production industries has increased significantly, in which N-Methylpyrrolidone (NMP) have aroused widespread attention. It is valuable to develop low-cost biological methods for NMP containing wastewater treatment. In this study, an NMP-driven PD system was acclimated in an sequencing batch reactor (SBR) by gradually replacing the sodium acetate with NMP. The nitrate-to-nitrite transformation ratio (NTR) of the acclimated PD sludge was stabilized around 60 % and reached up to 68.1 %.The TOC removal was maintained above 90 %, and the NO-3-N reduction reached up to 96.7 %. The relative abundance of denitrifying bacterium Paracoccus increased during domestication (from 0.11 % to 9.38 %), and the abundance of NMP metabolism-related genes (hyuA, hyuB, mao, and gabD) also increased significantly. Moreover, the contribution of Paracoccus to NMP metabolism-related genes gradually increased. It suggests that Paracoccus may play a major role in this system. In conclusion, this study verified the feasibility of NMP as a carbon source to drive PD process to achieve NO-2-N accumulation, and provided a novel strategy for nitrogen removal of battery wastewater.

Denitrification efficiency and biofilm community succession in a bidirectional alternating influent biofilter

Biofilters are widely used for nitrogen removal in wastewater treatment. This study developed a bidirectional alternating-influent biofilter to reduce clogging and enhance nitrogen removal. Alternating influent utilized biofilm on the media as a denitrification carbon source. With initial ammonium, nitrate, and total nitrogen concentrations of 8.49±0.30, 12.52±0.20, and 19.89±0.79 mg/L, the forward influent achieved ammonium, nitrate, and total nitrogen removal efficiencies of 81.6%, 66.8%, and 71.2%, increasing by 13.3%, 3.0%, and 4.8% at the effluent. Reverse influent further boosted nitrate and total nitrogen removal by 14.0% and 5.5%. The natural DO gradient under conventional influent conditions was simulated, and the nitrogen removal mechanism and treatment effect, mainly nitrification and denitrification, were discussed. Microbial analysis showed that endogenous carbon in the biofilm, derived from decaying cells and EPS, reduced clogging risk. Significant changes in bacterial count, EPS content, and microbial abundance were observed across influent directions, with Proteobacteria, Bacteroidetes, and Pseudomonas increasing under reverse flow. These results indicate that bidirectional alternating influent can significantly improve nitrogen removal and reduce clogging, offering an effective optimization for wastewater treatment.

Genomic synergistic efficient carbon fixation and nitrogen removal induced by excessive inorganic carbon in the anammox-centered coupling system

Given the significance of HCO3- for autotrophic anammox bacteria (AnAOB), excessive HCO3- was always provided in anammox-related systems and engineering applications. However, its impact mechanism on anammox process at genome-level remains unknown. This study firstly established an anammox-centered coupling system that entails heterotrophic partial denitrification (PD) and hydrolytic acidification (A-PDHA) fed mainly with inorganic carbon (high HCO3- concentration and low C/N ratio). Metagenomic binning and metatranscriptomics analyses indicated that high HCO3- concentration enhanced expression of natural most efficient phosphoenolpyruvate (PEP) carboxylase within AnAOB, by up to 30.59 folds. This further induced AnAOB to achieve high-speed carbon-fixing reaction through cross-feeding of phosphate and PEP precursors with heterotrophs. Additionally, the enhanced activity of transporters and catalytic enzymes (up to 4949-fold) induced by low C/N ratio enabled heterotrophs to eliminate extracellular accumulated energy precursors mainly derived from carbon fixation products of AnAOB. This maintained high-speed carbon-fixing reaction within AnAOB and supplemented heterotrophs with organics. Moreover, assimilated energy precursors stimulated nitrogen metabolism enzymes, especially NO2- reductase (968.14 times), in heterotrophs. This established an energy-saving PD-A process mediated by interspecies NO shuttle. These variation resulted in efficient nitrogen removal (>95 %) and reduced external organic carbon demand (67 %) in A-PDHA system. This study unveils the great potential of an anammox-centered autotrophic-heterotrophic coupling system for achieving cost-effective nitrogen removal and enhancing carbon fixation under excessive HCO3- doses.

A synergistic approach combining computational fluid dynamics simulation with hydrolysis-acidification for dye wastewater treatment

Wastewater treatment is effectively conducted using anaerobic biological methods. Nevertheless, the efficiency of these methods can be hindered by challenges like short-circuits and dead zones, particularly in treating persistent contaminants. This work utilized computational fluid dynamics (CFD) simulations to enhance water distribution, ensuring uniform interactions between solid and liquid phases, and thus mitigating issues related to short-circuits and dead zones. Such enhancements notably amplified the anaerobic biological process's efficiency. Furthermore, dye biodegradability was improved through the application of the hydrolysis acidification technique. Optimal hydraulic retention time for the hydrolysis-acidification reactor, established at 9 h, was determined via sludge cultivation and domestication for stable operation. During stable operation, an elevation in effluent volatile fatty acids was observed, alongside a COD removal rate fluctuating between 15% and 29%. Approximately 50% was noted as the rate of color removal. Simultaneously, a noticeable decrease in effluent pH occurred, with total nitrogen removal approximating 8%. An estimated BOD5/COD ratio of 0.32 was recorded. The incorporation of microbial agents led to an enhanced COD removal, ranging from 28% to 33%, thereby stabilizing the effluent BOD5/COD ratio at around 0.35. This research highlights the advantages of optimizing water distribution in anaerobic reactors, particularly when combined with hydrolysis-acidification techniques, effectively addressing issues of short-circuits and dead zones.

Ciprofloxacin affects nutrient removal in manganese ore-based constructed wetlands: Adaptive responses of macrophytes and microbes

Ciprofloxacin (CIP) has received considerable attention in recent decades due to its high ecological risk. However, little is known about the potential response of macrophytes and microbes to varying levels of CIP exposure in constructed wetlands. Therefore, lab-scale manganese ore-based tidal flow constructed wetlands (MO-TFCWs) were operated to evaluate the responses of macrophytes and microbes to CIP over the long term. The results indicated that total nitrogen removal improved from 79.93% to 87.06% as CIP rose from 0 to 4 mg L-1. The chlorophyll content and antioxidant enzyme activities in macrophytes were enhanced under CIP exposure, but plant growth was not inhibited. Importantly, CIP exposure caused a marked evolution of the substrate microbial community, with increased microbial diversity, expanded niche breadth and enhanced cooperation among the top 50 genera, compared to the control (no CIP). Co-occurrence network also indicated that microorganisms may be more inclined to co-operate than compete. The abundance of the keystone bacterium (involved in nitrogen transformation) norank_f__A0839 increased from 0.746% to 3.405%. The null model revealed drift processes (83.33%) dominated the community assembly with no CIP and 4 mg L-1 CIP. Functional predictions indicated that microbial carbon metabolism, electron transfer and ATP metabolism activities were enhanced under prolonged CIP exposure, which may contribute to nitrogen removal. This study provides valuable insights that will help achieve stable nitrogen removal from wastewater containing antibiotic in MO-TFCWs.

Robustness of the synergistic partial-denitrification, anammox, and fermentation process for treating domestic and nitrate wastewaters under fluctuating C/N ratios

The synergistic partial-denitrification, anammox, and fermentation (SPDAF) process presents a promising solution to treat domestic and nitrate wastewaters. However, its capability to handle fluctuating C/N ratios (the ratios of COD to total inorganic nitrogen) in practical applications remains uncertain. In this study, the SPDAF process was operated for 236 days with C/N ratios of 0.7-3.5, and a high and stable efficiency of nitrogen removal (84.9 ± 7.8%) was achieved. The denitrification and anammox contributions were 6.1 ± 7.1% and 93.9 ± 7.1%, respectively. Batch tests highlighted the pivotal role of in situ fermentation at low biodegradable chemical oxygen demand (BCOD)/NO3- ratios. As the BCOD/NO3- ratios increased from 0 to 6, the NH4+ and NO3- removal rates increased, while the anammox contribution decreased from 100% to 80.1% but remained the primary pathway of nitrogen removal. The cooperation and balanced growth of denitrifying bacteria, anammox bacteria, and fermentation bacteria contributed to the system's robustness under fluctuating C/N ratios.

Recent advances of partial anammox by controlling nitrite supply in mainstream wastewater treatment through step-feed mode

At present, the step-feed process is a very active branch in practical application of mainstream wastewater treatment, and the anammox technology empowers the sustainable development and in-depth research of step-feed process. This review provides a systematically inspection of the realization and application of partial anammox process through step-feed mode, with a particular focus on controlling nitrite supply for anammox. The characteristics and advantages of step-feed mode in traditional management are reviewed. The unique organics utilization strategy by step-feed and indispensable intermittent aeration mode creates advantages for achieving nitritation (NH4+ → NO2-) and denitratation (NO3- → NO2-), providing flexible combination possibility with anammox. Additionally, the lab- or pilot-scale control strategies with different forms of anammox, including nitritation/anammox, denitratation/anammox, and double-anammox (combined nitritation/anammox and denitratation/anammox), are summarized. Finally, future directions and application perspectives on leveraging the relationship between flocs and biofilm, nitritation and denitratation, and different strains to maximize the anammox proportion in N-removal are proposed.

How to Provide Nitrite Robustly for Anaerobic Ammonium Oxidation in Mainstream Nitrogen Removal

Innovation in decarbonizing wastewater treatment is urgent in response to global climate change. The practical implementation of anaerobic ammonium oxidation (anammox) treating domestic wastewater is the key to reconciling carbon-neutral management of wastewater treatment with sustainable development. Nitrite availability is the prerequisite of the anammox reaction, but how to achieve robust nitrite supply and accumulation for mainstream systems remains elusive. This work presents a state-of-the-art review on the recent advances in nitrite supply for mainstream anammox, paying special attention to available pathways (forward-going (from ammonium to nitrite) and backward-going (from nitrate to nitrite)), key controlling strategies, and physiological and ecological characteristics of functional microorganisms involved in nitrite supply. First, we comprehensively assessed the mainstream nitrite-oxidizing bacteria control methods, outlining that these technologies are transitioning to technologies possessing multiple selective pressures (such as intermittent aeration and membrane-aerated biological reactor), integrating side stream treatment (such as free ammonia/free nitrous acid suppression in recirculated sludge treatment), and maintaining high activity of ammonia-oxidizing bacteria and anammox bacteria for competing oxygen and nitrite with nitrite-oxidizing bacteria. We then highlight emerging strategies of nitrite supply, including the nitrite production driven by novel ammonia-oxidizing microbes (ammonia-oxidizing archaea and complete ammonia oxidation bacteria) and nitrate reduction pathways (partial denitrification and nitrate-dependent anaerobic methane oxidation). The resources requirement of different mainstream nitrite supply pathways is analyzed, and a hybrid nitrite supply pathway by combining partial nitrification and nitrate reduction is encouraged. Moreover, data-driven modeling of a mainstream nitrite supply process as well as proactive microbiome management is proposed in the hope of achieving mainstream nitrite supply in practical application. Finally, the existing challenges and further perspectives are highlighted, i.e., investigation of nitrite-supplying bacteria, the scaling-up of hybrid nitrite supply technologies from laboratory to practical implementation under real conditions, and the data-driven management for the stable performance of mainstream nitrite supply. The fundamental insights in this review aim to inspire and advance our understanding about how to provide nitrite robustly for mainstream anammox and shed light on important obstacles warranting further settlement.

Efficient nitrogen removal from municipal wastewater by an autotrophic-heterotrophic coupled anammox system: The up-regulation of key functional genes

The metabolic pathways based on key functional genes were innovatively revealed in the autotrophic-heterotrophic coupled anammox system for real municipal wastewater treatment. The nitrogen removal performance of the system was stabilized at 88.40 ± 3.39 % during the treatment of real municipal wastewater. The relative abundances of the nitrification functional genes ammonia oxidase (amoA/B/C), hydroxylamine oxidoreductase (hao), and nitrite oxidoreductases (nxrA/B) were increased by 1.2-2.4 times, and these three nitrification functional genes were mostly contributed by Nitrospira that dominated the efficient nitrification of the system. The relative abundance of anammox bacteria Candidatus Brocadia augmented from 0.35 % to 0.75 %, accompanied with the increased expression of hydrazine synthase (hzs) and hydrazine dehydrogenase (hdh), resulting in the major role of anammox (81.24 %) for nitrogen removal. The expression enhancement of the functional genes nitrite reductase (narG/H, napA/B) that promoted partial denitrification (PD) of the system weakened the adverse effects of the sharp decline in the population of PD microbe Thauera (from 5.7 % to 2.2 %). The metabolic module analysis indicated that the carbon metabolism pathways of the system mainly included CO2 fixation and organic carbon metabolism, and the stable enrichment of autotrophic bacteria ensured stable CO2 fixation. Furthermore, the enhanced expression of the glucokinases (glk, GCK, HK, ppgk) and the abundant pyruvate kinase (PK) achieved stable hydrolysis ability of organic carbon metabolism function of the system. This study offers research basics to practical application of the mainstream anammox process.

Critical analysis on the transformation and upgrading strategy of Chinese municipal wastewater treatment plants: Towards sustainable water remediation and zero carbon emissions

In the light of circular economy aspects, processing of large-scale municipal wastewater treatment plants (WWTPs) needs reconsideration to limit the overuse of energy, implement of non-green technologies and emit abundant greenhouse gas. Along with the huge increase in the worldwide population and agro-industrial activities, global environmental organizations have issued several recent roles to boost scientific and industrial communities towards sustainable development. Over recent years, China has imposed national and regional standards to control and manage the discharged liquid and solid waste, as well as to achieve carbon peaking and carbon neutrality. The aim of this report is to analyze the current state of Chinese WWTPs routing and related issues such as climate change and air pollution. The used strategies in Chinese WWTPs and upgrading trends were critically discussed. Several points were addressed including the performance, environmental impact, and energy demand of bio-enhanced technologies, including hydrolytic acidification pretreatment, efficient (toxic) strain treatment, and anaerobic ammonia oxidation denitrification technology, as well as advanced treatment technologies composed of physical and chemical treatment technologies, biological treatment technology and combined treatment technology. Discussion and critical analysis based on the current data and national policies were provided and employed to develop the future development trend of municipal WWTPs in China from the construction of sustainable and "Zero carbon" WWTPs.

Untargeted metabolomics elucidated biosynthesis of polyhydroxyalkanoate by mixed microbial cultures from waste activated sludge under different pH values

Waste activated sludge has been frequently used as mixed substrate to produce polyhydroxyalkanoate (PHA). However, insufficient research on microbial metabolism has led to difficulties in regulating PHA accumulation in mixed microbial cultures (MMCs). To explore the variation of functional genes during domestication and the effect of different pH conditions on metabolic pathways during PHA accumulation, MMCs were domesticated by adding acetate and propionate with aerobic dynamic feeding strategy for 60 days. As the domestication progressed, the microbial community diversity declined and PHA-producing bacteria, Brevundimonas, Dechloromonas and Hyphomonas, were enriched. Through bacterial function prediction by PICRUSt the gene rpoE involved in starvation resistance of bacteria was enriched after the domestication. The pH value of 8.5 was the best condition for PHA accumulation in MMCs, under which a maximum PHA content reached 23.50% and hydroxybutyric (HB)/hydroxyvaleric (HV) reached 2.22. Untargeted metabolomics analysis exhibited that pH conditions of 7 and 8.5 could promote the up-regulation of significant differential metabolites, while higher alkaline conditions caused the inhibition of metabolic activity. Functional annotation showed that pH condition of 8.5 significantly affected Pyrimidine metabolism, resulting in an increase in PHA production. Regarding the pathways of PHA biosynthesis, acetoacetate was found to be significant in the metabolism of hydroxybutyric, and the alkaline condition could restrain the conversion from hydroxybutyric (HB) to the acetoacetate to protect PHB accumulation in MMCs compared with neutral condition. Taken together, the present results can advance the fundamental understanding of metabolic function in PHA accumulation under different pH conditions.

Superior nitrogen removal and efficient sludge reduction via partial nitrification-anammox driven by addition of sludge fermentation products for real sewage treatment

Efficient retention and enrichment of anammox bacteria (AnAOB) are essential for the application of municipal wastewater anammox. Herein, an innovative process for highly enriching AnAOB within suspended carrier was developed in a single-stage anaerobic/oxic/anoxic reactor with 5.5 % carrier filling ratio for real sewage. Addition of sludge fermentation products promoted stable maintenance of partial nitrification (nitrite accumulation rate > 90.0 %) and achieved efficient external sludge reduction (27.6-37.9 %). Continuous nitrite supply and carrier addition promoted AnAOB enrichment (2.4 × 1011 gene copies/g dry sludge). Candidatus Brocadia was the predominant bacteria in carriers (18.6 %). The average effluents of total inorganic nitrogen (TIN) and NH4+-N were 1.9 and 0.8 mg/L with removal rates of 97.0 % and 98.7 %. In the anoxic stage, TIN removal rate reached 71.5 %, and the proportion of anammox to nitrogen removal accounted for 82.7 %. This study broadens the application of mainstream sewage anammox and the resource utilization of waste activated sludge.

Highly efficient transformation of slowly-biodegradable organic matter into endogenous polymers during hydrolytic fermentation for achieving effective nitrite production by endogenous partial denitrification

The utilization of slowly-biodegradable organic matter (SBOM) to provide nitrite efficiently for anaerobic ammonia oxidation (anammox) process is an essential topic. High nitrite concentration without inhibition of exogenous organic matter is optimal condition for anammox process. In this study, hydrolytic fermentation (HF) of SBOM was applied to drive an endogenous partial denitrification (EPD) process (nitrate to nitrite) during an anaerobic-anoxic operation in a starch-fed system. With a limited production of exogenous organic matter (22.3 ± 4.9 mg COD/L), 79.0% of SBOM was transformed into poly-hydroxyalkanoates (PHA) through a pathway of simultaneous HF-absorption and endogenous polymer synthesis, corresponding to a hydrolytic fermentation ratio of 86.0%. A high nitrate to nitrite transformation ratio of 85.4% was achieved under an influent carbon to nitrogen ratio of 4.8. Denitrifying glycogen-accumulating organisms (DGAOs) was enriched from 0.6% to 10.9%, with an increase from 0.7 to 1.0 of nitrate reductase genes to nitrite reductase genes ratio. Subsequently, nitrate reduction rate was 5.6-fold higher than the nitrate reduction rate. A prominent migration of exogenous complete denitrification to EPD was accomplished. Furthermore, the starch-fed system exhibited performance with significant adaptability and stability in the presence of different SBOMs (dissolved protein and primary sludge). Therefore, the HF-EPD system achieved efficient nitrite production through EPD with the addition of various SBOMs, providing a potential alternative to anammox systems for the treatment of SBOM-rich wastewater.

Impact of soluble organic matter and particulate organic matter on anammox system: Performance, microbial community and N2O production

In this study, the effects of soluble readily biodegradable COD (sCOD) and particulate slowly biodegradable COD (pCOD) on anammox process were investigated. The results of the long-term experiment indicated that a low sCOD/N ratio of 0.5 could accelerate the anammox and denitrification activity, to reach as high as 84.9%±2.8% TN removal efficiency. Partial denitrification-anammox (PDN/anammox) and denitrification were proposed as the major pathways for nitrogen removal, accounting for 91.3% and 8.7% of the TN removal, respectively. Anammox bacteria could remain active with high abundance of anammox genes to maintain its dominance. Candidatus Kuenenia and Thauera were the predominant genera in the presence of organic matter. Compared with sCOD, batch experiments showed that the introduction of pCOD had a negative effect on nitrogen removal. The contribution of denitrification to nitrogen removal decreased from approximately 14% to 3% with increasing percentage of pCOD. In addition, the analysis result of the process data using an optimized ASM1 model indicated that high percentage of pCOD resulted in serious N₂O emission (the peak value up to 0.25 mg N/L), which was likely due to limited mass diffusion and insufficient available carbon sources for denitrification. However, a high sCOD/N ratio was beneficial for alleviating N₂O accumulation.

Machine learning estimation of biodegradable organic matter concentrations in municipal wastewater

This study investigates whether a novel estimation method based on machine learning can feasibly predict the readily biodegradable chemical oxygen demand (RB-COD) and slowly biodegradable COD (SB-COD) in municipal wastewater from the oxidation-reduction potential (ORP) data of anoxic batch experiments. Anoxic batch experiments were conducted with highly mixed liquor volatile suspended solids under different RB-COD and SB-COD conditions. As the RB-COD increased, the ORP breakpoint appeared earlier, and fermentation occurred in the interior of the activated sludge, even under anoxic conditions. Therefore, the ORP decline rates before and after the breakpoint were significantly correlated with the RB-COD and SB-COD, respectively (p < 0.05). The two biodegradable CODs were estimated separately using six machine learning models: an artificial neural network (ANN), support vector regression (SVR), an ANN-based AdaBoost, a SVR-based AdaBoost, decision tree, and random forest. Against the ORP dataset, the RB-COD and SB-COD estimation correlation coefficients of SVR-based AdaBoost were 0.96 and 0.88, respectively. To identify which ORP data are useful for estimations, the ORP decline rates before and after the breakpoint were separately input as datasets to the estimation methods. All six machine learning models successfully estimated the two biodegradable CODs simultaneously with accuracies of ≥0.80 from only ORP time-series data. Sensitivity analysis using the Shapley additive explanation method demonstrated that the ORP decline rates before and after the breakpoint obviously contributed to the estimation of RB-COD and SB-COD, respectively, indicating that acquiring the ORP data with various decline rates before and after the breakpoint improved the estimations of RB-COD and SB-COD, respectively. This novel estimation method for RB-COD and SB-COD can assist the rapid control of biological wastewater treatment when the biodegradable organic matter concentration dynamically changes in influent wastewater.

A review of enhanced municipal wastewater treatment through energy savings and carbon recovery to reduce discharge and CO2 footprint

Municipal wastewater treatment that mainly performed by conventional activated sludge (CAS) process faces the challenge of intensive aeration-associated energy consumption for oxidation of organics and ammonium, contributing to significant directly/indirectly greenhouse gas (GHG) emissions from energy use, which hinders the achievement of carbon neutral, the top priority mission in the coming decades to cope with the global climate change. Therefore, this article aimed to offer a comprehensive analysis of recently developed biological treatment processes with the focus on reducing discharge and CO2 footprint. The biotechnologies including "Zero Carbon", "Low Carbon", "Carbon Capture and Utilization" are discussed, it suggested that, by integrating these processes with energy-saving and carbon recovery, the challenges faced in current wastewater treatment plants can be overcome, and a carbon-neutral even be possible. Future research should investigate the integration of these methods and improve anammox contribution as well as minimize organics lost under different scales.

Metolachlor adsorption using walnut shell biochar modified by soil minerals

The removal of pesticide residues in soil is a research hotspot. The metolachlor (MET) adsorption by walnut shell biochar (BC) modified with montmorillonite (MBC), illite (IBC), and kaolinite (KBC), as well as the original BC (OBC) was investigated. The characteristics of samples were studied by scanning electron microscopy and mapping analysis, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetry, and chemical stability analysis. The effects of the dosage, ionic strength, and pH, and determined the adsorption kinetics and isotherms for MET with the BCs were analyzed. In addition, response surface methodology regression model analysis was conducted and the adsorption mechanisms were investigated. The results showed that the thermal stability and chemical stability of MBC, IBC, and KBC were higher than those of OBC, and MBC had the greatest stability. The MET adsorption rates of OBC, MBC, IBC, and KBC were 62.15%, 92.47%, 87.97%, and 83.31%, respectively. The kinetic fitting results and adsorption mechanisms showed that the modification of BC with minerals enhanced the physical adsorption of MET. The maximum MET adsorption capacities by OBC, MBC, IBC, and KBC were 39.68 mg g^-1, 68.49 mg g^-1, 65.79 mg g^-1, and 65.36 mg g^-1, respectively. Hydrogen bonds, π-π bonds, coordination bonds, and hydrophobic interactions were the key adsorption mechanisms. Therefore, the mineral-modified BCs were characterized by high adsorption rates and stability. This approach can make BC more efficient, with higher performance as a low cost soil amendment.

Rapidly achieving partial denitrification from nitrate wastewater in a alkaline fermentation system with primary sludge as inoculated sludge and fermentable substrate

In order to promote practical engineering application of anaerobic ammonium oxidation(anammox) process, reduction of primary sludge(PS) in wastewater treatment plants(WWTPs) and removal of nitrate contaminant, a single-stage simultaneous alkaline fermentation coupled with partial denitrification(SAFPD) system was established successfully in this study. Nitrite production was rapidly achieved from nitrate wastewater with PS as inoculated sludge and fermentable substrate under anaerobic and anoxic operating conditions. During the stable operation period, the primary sludge reduction(PSR) and productivity of organic matters were 27.9% and 483.8mgCOD/gVSS, with nitrate removal of 90.7%, NO₃^- to NO₂^- transformation ratio(NTR) of 80.0%. After 125 days of acclimation, the relative abundance of Thauera, Dechloromonas and Candidatus_Competibacter increased from 0.17%, 0.02% and 0.05% to 11.58%, 4.28% and 5.6% respectively. Above results showed that this SAFPD system not only realized the reduction of PS and nitrate removal, but also laid a solid foundation for anammox process with its high nitrite production.

Synergistic partial denitrification, anammox and in-situ fermentation (SPDAF) process for treating domestic and nitrate wastewater: Response of nitrogen removal performance to decreasing temperature

A synergistic partial denitrification, anaerobic ammonium oxidation (Anammox), and in-situ fermentation (SPDAF) system was established to solve problems of wastewater treatment plants (WWTPs) in combined treatment of domestic sewage, and nitrate wastewater discharged from industrial areas. The SPDAF system was started up at decreasing temperatures (26.8-18.9 ℃), and remained robust at abrupt temperature drop and drastic temperature fluctuations (20.7-14.1 ℃). The influent and effluent total inorganic nitrogen (TIN) were 97.0 ± 3.7 mg/L and 10.3 ± 4.0 mg/L, respectively. In-situ fermentation supplemented electron donors for NO₃^--N reduction. A high TIN removal efficiency, of 89.5 ± 3.9% was obtained. Specifically, Anammox contributed 90.9 ± 5.2% to TIN removal. Furthermore, the abundances of hydrolysis and acidogenesis bacteria were 14.02% and 29.47% in the low and high zones, respectively, which promoted fermentation and the use of complex organics. This study provided novel insights for actual operation of WWTPs.

Reductive potential from cathode electrode as an option for the achievement of short-cut nitrification in bioelectrochemical systems

Nitrogen removal based on short-cut nitrification (SCN) have attract more attentions, in which stable nitrite accumulation is prerequisite. In this study, different reductive potential was applied to inhibit nitrite oxidizing bacteria for achievement of SCN in aerobic cathode chamber of bioelectrochemical systems with dissolved oxygen concentration of 3.5 mg/L. The results demonstrated that the applied potential facilitated nitrite accumulation with high ammonia oxidation rates. The maximum nitrate accumulation rate of 87.61% was obtained at -800 mV. The abundance of Nitrosomonas and Thauera increased while Nitrospira abundance declined with more negative reductive potentials. The activity of nitric oxide reductase was also evidently inhibited. The above-mentioned three genera were the keystone taxa in co-occurrence network with high degree and closeness centrality. Interestingly, total nitrogen (TN) removal was enhanced simultaneously in the absence of external organic carbon. Reductive potential would be a promising approach for achieving SCN and simultaneously TN removal.