Green bioprocessing of protein from Chlorella vulgaris microalgae towards circular bioeconomy

Three-phase partitioning, a recyclable method for the purification of R-phycoerythrin from a red algae Porphyra yezoensis

In this study, R-phycoerythrin (R-PE) was isolated and characterized from Porphyra yezoensis by three-phase partitioning (TPP) method. The effects of temperature, time, pH, salt saturation, and volume ratio on the purity and recovery rate of R-PE were studied. The optimum extraction conditions were determined as follows: salt saturation of 70%, temperature of 25 °C, time of 45 min, pH of 7.0, and volume ratio of 1:1. Under the optimal extraction conditions, the purity of R-PE was 3.90. The results of SDS-PAGE showed that R-PE has three bands at 23 kDa, 22 kDa, and 18 kDa, corresponding to its α, β, γ subunits. The structure and optical activity of R-PE did not change before and after purification based on ultraviolet, infrared, and fluorescence spectra. In addition, the purity and recovery rate of R-PE extracted by tert-butanol were evaluated. The results showed that the extraction performance of tert-butanol for R-PE remained unchanged in three recoveries. These show that TPP is an efficient, green, and recyclable extraction technology.

Microalgal Biorefinery Concepts’ Developments for Biofuel and Bioproducts: Current Perspective and Bottlenecks

Microalgae have received much interest as a biofuel feedstock. However, the economic feasibility of biofuel production from microalgae does not satisfy capital investors. Apart from the biofuels, it is necessary to produce high-value co-products from microalgae fraction to satisfy the economic aspects of microalgae biorefinery. In addition, microalgae-based wastewater treatment is considered as an alternative for the conventional wastewater treatment in terms of energy consumption, which is suitable for microalgae biorefinery approaches. The energy consumption of a microalgae wastewater treatment system (0.2 kW/h/m³) was reduced 10 times when compared to the conventional wastewater treatment system (to 2 kW/h/m³). Microalgae are rich in various biomolecules such as carbohydrates, proteins, lipids, pigments, vitamins, and antioxidants; all these valuable products can be utilized by nutritional, pharmaceutical, and cosmetic industries. There are several bottlenecks associated with microalgae biorefinery. Hence, it is essential to promote the sustainability of microalgal biorefinery with innovative ideas to produce biofuel with high-value products. This review attempted to bring out the trends and promising solutions to realize microalgal production of multiple products at an industrial scale. New perspectives and current challenges are discussed for the development of algal biorefinery concepts.

Non-Formaldehyde, Bio-Based Adhesives for Use in Wood-Based Panel Manufacturing Industry-A Review

There is a strong need to develop and implement appropriate alternatives to replace formaldehyde-based adhesive systems, such as phenol–formaldehyde, in the industry of wood-based panels (WBPs). This is due to the toxicity and volatility of formaldehyde and restrictions on its use associated with some formaldehyde-based adhesives. Additionally, the current pressure to reduce the dependence on polymeric materials, including adhesives, from petrochemical-based sources has led to increased interest in bio-based adhesives, which, in some cases, already provide acceptable properties to the end-product. Among the potential raw materials for good-quality, renewable-based adhesive formulations, this paper highlights tannins, lignin, and protein sources. However, regarding renewable sources, specific features must be considered, such as their lower reactivity than certain petrochemical-based sources and, therefore, higher production costs, resource availability issues, and the need for toxicological investigations on alternative systems, to compare them to conventional systems. As a result, further research is highly encouraged to develop viable formaldehyde-free adhesive systems based on renewable sources, either at the technical or economical level. Moreover, herein, we also showcase the present market of WBPs, highlighting the obstacles that the alternative and new bio-based adhesives must overcome.