Efficient adsorption of ciprofloxacin using Ga2S3/S-modified biochar via the high-temperature sulfurization

Efficient removal of ciprofloxacin in aqueous solutions by magnetic Se-MOF embedded within a biopolymer (chitosan/alginate): Adsorptive behavior, mechanism study, and optimization using Box-Behnken design

A novel magnetic selenium-based metal-organic framework (MSe-MOF) incorporated into chitosan/alginate biopolymer hydrogel beads (MSCA) has been developed for the effective adsorption of ciprofloxacin (CIP), a commonly utilized fluoroquinolone antibiotic, from aqueous solutions. The hybrid composite was synthesized through an environmentally friendly fabrication process and widely characterized by several analytical performances, including XRD, SEM, EDX, FT-IR, XPS, and nitrogen adsorption/desorption isotherms. The characterization consequences validated the establishment of a porous architecture through a substantial specific surface area of 420 m2/g, which is conducive to efficiently capturing contaminants. Batch adsorption tests were conducted to assess the effects of pH, adsorbent amount, interaction time, initial CIP concentration, and temperature on the adsorption procedure. The equilibrium adsorption data aligned most closely with the Langmuir isotherm model, exhibiting a 440 mg/g maximum adsorption capacity, while the kinetics adhered to a pseudo-second-order model, signifying chemisorption as the predominant mechanism. Thermodynamic parameters (ΔH° > 0 and ΔS° > 0) indicated that the process is endothermic and driven by entropy. Method of optimization was accomplished utilizing the Box-Behnken design within the framework of Response Surface Methodology (RSM), which affirmed the statistical significance and robustness of the model. Furthermore, the MSCA hydrogel beads exhibited outstanding reusability across multiple cycles with negligible performance degradation. These effects emphasize the potential of MSCA as a sustainable, biodegradable, and operational medium for the elimination of pharmaceutical contaminants from wastewater.

Electrospun ZIF-67/PVDF composite membranes for efficient ciprofloxacin removal from wastewater

Cobalt 2-methylimidazole (ZIF-67) has been broadly explored for its applications in the treatment of antibiotics in wastewater. However, ZIF-67 in powder form is difficult to recover. In the study, ZIF-67 and Polyvinylidene Fluoride (PVDF) were blended via electrospinning to prepare ZIF-67/PVDF membrane for adsorption of ciprofloxacin (CIP). The ZIF-67/PVDF membrane demonstrated outstanding adsorption efficiency for CIP, with a maximum adsorption capability of 4087.5 μg cm-2. The adsorption performance of ZIF-67/PVDF remains stable across a wide pH range and is unaffected by ionic interference. The ZIF-67/PVDF adsorbent follows pseudo-second-order kinetics and the Langmuir model. Furthermore, thermodynamic research indicates the adsorption of CIP is a spontaneous and exothermic process. It is proposed that the adsorption mechanism of CIP onto ZIF-67/PVDF involves electrostatic interactions, hydrogen bonding, π-π interactions, coordination bonding, and hydrophobic interactions.

Sulfur-functionalized biochar: Synthesis, characterization, and utilization for contaminated soil and water remediation-a review

The development of innovative, eco-friendly, and cost-effective adsorbents is crucial for addressing the widespread issue of organic and inorganic pollutants in soil and water. Recent advancements in sulfur reagents-based materials, such as FeS, MoS2, MnS, S0, CS2, Na2S, Na2S2O32-, H2S, S-nZVI, and sulfidated Fe0, have shown potential in enhancing the functional properties and elemental composition of biochar for pollutant removal. This review explores the synthesis and characterization of sulfur reagents/species functionalized biochar (S-biochar), focusing on factors like waste biomass attributes, pyrolysis conditions, reagent adjustments, and experimental parameters. S-biochar is enriched with unique sulfur functional groups (e.g., C-S, -C-S-C, C=S, thiophene, sulfone, sulfate, sulfide, sulfite, elemental S) and various active sites (Fe, Mn, Mo, C, OH, H), which significantly enhance its adsorption efficiency for both organic pollutants (e.g., dyes, antibiotics) and inorganic pollutants (e.g., metal and metalloid ions). The literature analysis reveals that the choice of feedstock, influenced by its lignocellulosic content and xylem structure, critically impacts the effectiveness of pollutant removal in soil and water. Pyrolysis parameters, including temperature (200-600 °C), duration (2-10 h), carbon-to-hydrogen (C:H) and oxygen-to-hydrogen (O:H) ratios in biochar, as well as the biochar-to-sulfur reagent modification ratio, play key roles in determining adsorption performance. Additionally, solution pH (2-8) and temperature (288, 298, and 308 K) affect the efficiency of pollutant removal, though optimal dosages for adsorbents remain inconsistent. The primary removal mechanisms involve physisorption and chemisorption, encompassing adsorption, reduction, degradation, surface complexation, ion exchange, electrostatic interactions, π-π interactions, and hydrogen bonding. This review highlights the need for further research to optimize synthesis protocols and to better understand the long-term stability and optimal dosage of S-biochar for practical environmental applications.

High-carbon-content biochar from chemical manufacturing plant sludge for effective removal of ciprofloxacin from aqueous media

Biochar is considered a promising biosorbent for harmful organic pollutants in aqueous media. However, only a limited number of biochars derived from industrial sludges have been utilized due to their problematic high ash content and heavy metal leaching. In this study, a highly effective biochar was prepared as a superabsorbent for ciprofloxacin (CIP) from chemical manufacturing plant sludge via K2CO3-activated pyrolysis, and its CIP removal behavior was evaluated. Unlike sewage sludge, chemical manufacturing plant sludge contains low SiO2, resulting in an ultra-pure carbon (95.4%) based biochar with almost negligible ash content. As the pyrolysis temperature increased from 400 to 800 °C, the ordered graphitic carbon structure transformed into an amorphous carbon phase, and most oxygen-containing groups disappeared. However, the pore size significantly decreased to ∼4.5 nm due to the corrosive carbon volatilization caused by K2CO3, resulting in an extremely large surface area of 2331.8 m2/g. Based on its large surface area and porous carbon structure, the activated biochar at 800 °C (CAB-800) exhibited an outstanding CIP adsorption capacity of 555.56 mg/g. The CIP adsorption isotherm, kinetic, and thermodynamic studies were systematically investigated. The CIP adsorption on CAB-800 was mainly attributed to π-π interactions and hydrogen bond formation, with electrostatic interactions partially contributing to the adsorption reaction. From pH 2 to 12, CAB-800 showed an excellent CIP adsorption capacity of over 316.7 mg/g, with adsorption favored under acidic conditions. Except for HCO3- and CO32-, the presence of anions and humic acids did not significantly affect CIP adsorption capacity. These results demonstrate that biochar produced from chemical manufacturing industry sludge via K2CO3 activation is a highly feasible material for the removal of CIP from aqueous media.

Differential effects of polystyrene microplastics on the adsorption of cadmium and ciprofloxacin by tea leaf litter-derived magnetic biochar: Influencing factors and mechanisms

Water pollution involves the coexistence of microplastics (MPs) and traditional pollutants, and how can MPs influence the adsorption of other pollutants by biochar during the treatment process remains unclear. This study aimed to investigate the influence of polystyrene microplastics (PS MPs) on the adsorption of cadmium (Cd) and ciprofloxacin (CIP) by magnetic biochar (MTBC) in the single and binary systems. MTBC was prepared using tea leaf litter; the effects of time, pH, and salt ions on the adsorption behaviors were investigated; and X-ray photoelectronic spectroscopy (XPS) and density flooding theory analysis were conducted to elucidate the influence mechanisms. Results indicated that PS MPs reduced the pollutants adsorption by MTBC due to the heterogeneous aggregation between PS MPs and MTBC and the surface charge change of MTBC induced by PS MPs. The effects of PS MPs on heavy metals and antibiotics adsorption were distinctly different. PS MPs reduced Cd adsorption on MTBC, which were significantly influenced by the solution pH and salt ions contents, suggesting the participation of electrostatic interaction and ion exchange in the adsorption, whereas the effects of PS MPs on CIP adsorption were inconspicuous. In the hybrid system, PS MPs reduced pollutants adsorption by MTBC with 66.3% decrease for Cd and 12.8% decrease for CIP, and the more remarkable reduction for Cd was due to the predominated physical adsorption, and CIP adsorption was mainly a stable chemisorption. The influence of PS MPs could be resulted from the interaction between PS MPs and MTBC with changing the functional groups and electrostatic potential of MTBC. This study demonstrated that when using biochar to decontaminate wastewater, it is imperative to consider the antagonistic action of MPs, especially for heavy metal removal. PRACTITIONER POINTS: Magnetic biochar (MTBC) was prepared successfully using tea leaf litter. MTBC could be used for cadmium (Cd) and ciprofloxacin (CIP) removal. Polystyrene microplastics (Ps MPs) reduced Cd/CIP adsorption by MTBC. Ps MPs effects on Cd adsorption were more obvious than that of CIP. Ps MPs changed the functional groups and electrostatic potential of MTBC, thus influencing MTBC adsorption.

Recent advances in catalyst design, performance, and challenges of metal-heteroatom-co-doped biochar as peroxymonosulfate activator for environmental remediation

The escalation of global water pollution due to emerging pollutants has gained significant attention. To address this issue, catalytic peroxymonosulfate (PMS) activation technology has emerged as a promising treatment approach for effectively decontaminating a wide range of pollutants. Recently, modified biochar has become an increasingly attractive as PMS activator. Metal-heteroatom-co-doped biochar (MH-BC) has emerged as a promising catalyst that can provide enhanced performance over heteroatom-doped and metal-doped biochar due to the synergism between metal and heteroatom in promoting PMS activation. Therefore, this review aims to discuss the fabrication pathways (i.e., internal vs external doping and pre-vs post-modification) and key parameters (i.e., source of precursors, synthesis methods, and synthesis conditions) affecting the performance of MH-BC as PMS activator. Subsequently, an overview of all the possible PMS activation pathways by MH-BC is provided. Subsequently, Also, the detection, identification, and quantification of several reactive species (such as, •OH, SO4•-, O2•-, 1O2, and high valent oxo species) generated in the catalytic PMS system by MH-BC are also evaluated. Lastly, the underlying challenges associated with poor stability, the lack of understanding regarding the interaction between metal and heteroatom during PMS activation and quantification of radicals in multi-ROS system are also deliberated.

Unlocking the potential of magnetic biochar in wastewater purification: a review on the removal of bisphenol A from aqueous solution

Bisphenol A (BPA) is an essential and extensively utilized chemical compound with significant environmental and public health risks. This review critically assesses the current water purification techniques for BPA removal, emphasizing the efficacy of adsorption technology. Within this context, we probe into the synthesis of magnetic biochar (MBC) using co-precipitation, hydrothermal carbonization, mechanical ball milling, and impregnation pyrolysis as widely applied techniques. Our analysis scrutinizes the strengths and drawbacks of these techniques, with pyrolytic temperature emerging as a critical variable influencing the physicochemical properties and performance of MBC. We explored various modification techniques including oxidation, acid and alkaline modifications, element doping, surface functional modification, nanomaterial loading, and biological alteration, to overcome the drawbacks of pristine MBC, which typically exhibits reduced adsorption performance due to its magnetic medium. These modifications enhance the physicochemical properties of MBC, enabling it to efficiently adsorb contaminants from water. MBC is efficient in the removal of BPA from water. Magnetite and maghemite iron oxides are commonly used in MBC production, with MBC demonstrating effective BPA removal fitting well with Freundlich and Langmuir models. Notably, the pseudo-second-order model accurately describes BPA removal kinetics. Key adsorption mechanisms include pore filling, electrostatic attraction, hydrophobic interactions, hydrogen bonding, π-π interactions, and electron transfer surface interactions. This review provides valuable insights into BPA removal from water using MBC and suggests future research directions for real-world water purification applications.

Towards sorptive eradication of pharmaceutical micro-pollutant ciprofloxacin from aquatic environment: A comprehensive review

Antibiotics are widely prioritized pharmaceuticals frequently adopted in medication for addressing numerous ailments of humans and animals. However, the non-judicious disposal of ciprofloxacin (CIP) with concentration levels exceeding threshold limit in an aqueous environment has been the matter of growing concern nowadays. CIP is found in various waterways with appreciable mobility due to its limited decay in solidified form. Hence, the effective eradication strategy of this non-steroidal anti-inflammatory antibiotic from aqueous media is pivotal for preventing the users and the biosphere from their hazardous impacts. Reportedly several customary techniques like reverse osmosis, precipitation, cross-filtration, nano-filtration, ion exchange, microbial remediation, and adsorption have been employed to eliminate CIP from water. Out of them, adsorption is ascertained to be a potential method because of lesser preliminary investment costs, ease of operation, greater efficiency, less energy usage, reduced chemical and biological slurry production, and ready availability of precursor materials. Towards remediation of ciprofloxacin-laden water, plenty of researchers have used different adsorbents. However, the present-day challenge is opting the promising sorbent and its application towards industrial scale-up which is vital to get reviewed. In this article, adsorbents of diverse origins are reviewed in terms of their performances in CIP removal. The review stresses the impact of various factors on sorptive assimilation of CIP, adsorption kinetics, isotherms, mechanism of ionic interaction, contrivances for CIP detection, cost estimation and reusability assessments of adsorbents also that may endorse the next-generation investigators to decide the efficacious, environmental appealing and cost-competitive adsorbents for effective riddance of CIP from wastewater.

Efficient Degradation of Ciprofloxacin in Water over Copper-Loaded Biochar Using an Enhanced Non-Radical Pathway

The development of an efficient catalyst with excellent performance using agricultural biomass waste as raw materials is highly desirable for practical water pollution control. Herein, nano-sized, metal-decorated biochar was successfully synthesized with in situ chemical deposition at room temperature. The optimized BC-Cu (1:4) composite exhibited excellent peroxymonosulfate (PMS) activation performance due to the enhanced non-radical pathway. The as-prepared BC-Cu (1:4) composite displays a superior 99.99% removal rate for ciprofloxacin degradation (initial concentration 20 mg·L-1) within 40 min. In addition, BC-Cu (1:4) has superior acid-base adaptability (3.98~11.95) and anti-anion interference ability. The trapping experiments and identification of reactive oxidative radicals confirmed the crucial role of enhanced singlet oxygen for ciprofloxacin degradation via a BC-Cu (1:4)/PMS system. This work provides a new idea for developing highly active, low-cost, non-radical catalysts for efficient antibiotic removal.

Effect of mechanical-chemical modification on adsorption of beryllium by calcite

The treatment of beryllium wastewater has become a major problem in industry. In this paper, CaCO3 is creatively proposed to treat beryllium-containing wastewater. Calcite was modified by an omnidirectional planetary ball mill by a mechanical-chemical method. The results show that the maximum adsorption capacity of CaCO3 for beryllium is up to 45 mg/g. The optimum treatment conditions were pH = 7 and the amount of adsorbent was 1 g/L, and the best removal rate was 99%. The concentration of beryllium in the CaCO3-treated solution is less than 5 μg/L, which meets the international emission standard. The results show that the surface co-precipitation reaction between CaCO3 and Be (II) mainly occurs. Two different precipitates are generated on the used-CaCO3 surface; one is the tightly connected Be (OH)2 precipitation, and the other is the loose Be2(OH)2CO3 precipitation. When the pH of the solution exceeds 5.5, Be2+ in the solution is first precipitated by Be (OH)2. After CaCO3 is added, CO32- will further react with Be3(OH)33+ to form Be2(OH)2CO3 precipitation. CaCO3 can be considered as an adsorbent with great potential to remove beryllium from industrial wastewater.

Adsorption and photocatalytic degradation of quinolone antibiotics from wastewater using functionalized biochar

Quinolone antibiotics are emerging environmental contaminants, which cause serious harm to the ecological environment and human health. How to effectively remove these emerging pollutants from water remains a major challenge worldwide. In this study, a novel Fe/Ti biochar composite (Fe/Ti-MBC) was prepared by facile one-step co-pyrolysis of wood chips with hematite and titanium dioxide (TiO2) for adsorption and photocatalytic degradation of ciprofloxacin (CIP) and norfloxacin (NOR) in water. The results showed that the degradation efficiencies of Fe/Ti-MBC to CIP and NOR were 88.4% and 88.0%, respectively. The π-π interactions and polar interactions are the main adsorption mechanisms for CIP and NOR. In the photocatalytic process, h+ and ·OH are the main active substances for the oxidative degradation of CIP and NOR. This study shows that Fe/Ti-MBC is an effective and recyclable composite, providing a novel alternative way for antibiotics degradation.

Enhanced removal of sulfonamide antibiotics from water by phosphogypsum modified biochar composite

Antibiotic pollution has become a global eco-environmental issue. To reduce sulfonamide antibiotics in water and improve resource utilization of solid wastes, phosphogypsum modified biochar composite (PMBC) was prepared via facile one-step from distillers grains, wood chips, and phosphogypsum. The physicochemical properties of PMBC were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), Zeta potential, X-ray diffraction (XRD), etc. The influencing factors, adsorption behaviors, and mechanisms of sulfadiazine (SD) and sulfamethazine (SMT) onto PMBC were studied by batch and fixed bed column adsorption experiments. The results showed that the removal rates of SD and SMT increased with the increase of phosphogypsum proportion, while decreased with the increase of solution pH. The maximum adsorption capacities of modified distillers grain and wood chips biochars for SD were 2.98 and 4.18 mg/g, and for SMT were 4.40 and 8.91 mg/g, respectively, which was 9.0-22.3 times that of pristine biochar. Fixed bed column results demonstrated that PMBC had good adsorption capacities for SD and SMT. When the solution flow rate was 2.0 mL/min and the dosage of PMBC was 5.0 g, the removal rates of SD and SMT by modified wood chips biochar were both higher than 50% in 4 hr. The main mechanisms of SD and SMT removal by PMBC are hydrogen bonding, π-π donor-acceptor, electrostatic interaction, and hydrophobic interaction. This study provides an effective method for the removal of antibiotics in water and the resource utilization of phosphogypsum.

Advancements in electrochemical technologies for the removal of fluoroquinolone antibiotics in wastewater: A review

In recent times, the need to make water safer and cleaner through the elimination of recalcitrant pharmaceutical residues has been the aim of many studies. Fluoroquinolone antibiotics such as ciprofloxacin, norfloxacin, enrofloxacin, and levofloxacin are among the commonly detected pharmaceuticals in wastewater. Since the presence of these pharmaceuticals in water bodies poses serious risks to living organisms, it is vital to adopt effective wastewater treatment techniques for their complete removal. Electrochemical technologies such as photoelectrocatalysis, electro-Fenton, electrocoagulation, and electrochemical oxidation have been established as techniques capable of the complete removal of organics including pharmaceuticals from wastewater. Hence, this review presents discussions on the recent progress (literature within 2018-2022) in the applications of common electrochemical processes for the degradation of fluoroquinolone antibiotics from wastewater. The fundamentals of these processes are highlighted while the results obtained using the processes are critically discussed. Furthermore, the inherent advantages and limitations of these processes in the mineralization of fluoroquinolone antibiotics are clearly emphasized. Additionally, appropriate recommendations are made toward improving electrochemical technologies for the complete removal of these pharmaceuticals with minimal energy consumption. Therefore, this review will serve as a bedrock for future researchers concerned with wastewater treatments to make informed decisions in the selection of suitable electrochemical techniques for the removal of pharmaceuticals from wastewater.

Recent perspective of antibiotics remediation: A review of the principles, mechanisms, and chemistry controlling remediation from aqueous media

Antibiotic pollution is an ever-growing concern that affects the growth of plants and the well-being of animals and humans. Research on antibiotics remediation from aqueous media has grown over the years and previous reviews have highlighted recent advances in antibiotics remediation technologies, perspectives on antibiotics ecotoxicity, and the development of antibiotic-resistant genes. Nevertheless, the relationship between antibiotics solution chemistry, remediation technology, and the interactions between antibiotics and adsorbents at the molecular level is still elusive. Thus, this review summarizes recent literature on antibiotics remediation from aqueous media and the adsorption perspective. The review discusses the principles, mechanisms, and solution chemistry of antibiotics and how they affect remediation and the type of adsorbents used for antibiotic adsorption processes. The literature analysis revealed that: (i) Although antibiotics extraction and detection techniques have evolved from single-substrate-oriented to multi-substrates-oriented detection technologies, antibiotics pollution remains a great danger to the environment due to its trace level; (ii) Some of the most effective antibiotic remediation technologies are still at the laboratory scale. Thus, upscaling these technologies to field level will require funding, which brings in more constraints and doubts patterning to whether the technology will achieve the same performance as in the laboratory; and (iii) Adsorption technologies remain the most affordable for antibiotic remediation. However, the recent trends show more focus on developing high-end adsorbents which are expensive and sometimes less efficient compared to existing adsorbents. Thus, more research needs to focus on developing cheaper and less complex adsorbents from readily available raw materials. This review will be beneficial to stakeholders, researchers, and public health professionals for the efficient management of antibiotics for a refined decision.

Removal of Ciprofloxacin from Water by a Potassium Carbonate-Activated Sycamore Floc-Based Carbonaceous Adsorbent: Adsorption Behavior and Mechanism

In this study, a porous carbonaceous adsorbent was prepared from sycamore flocs by pyrolysis method and K₂CO₃ activation. The effects of preparative conditions of the material on its adsorptive property were explored. The optimal material (SFB_2-900) was obtained with a K₂CO₃/biochar mass ratio of 2:1 at an activation temperature of 900 °C, possessing a huge surface specific area (1651.27 m²/g). The largest adsorption capacity for ciprofloxacin on SFB_2-900 was up to 430.25 mg/g. The adsorption behavior was well described by the pseudo-second-order kinetic model and the Langmuir isothermal model. Meanwhile, this process was spontaneous and exothermic. The obtained material showed excellent adsorption performance in the conditions of diverse pH range, ionic strength, and water quality of the solution. The optimum adsorption conditions (pH = 7.01, dosage = 0.6 g/L, and C₀ = 52.94 mg/L) determined based on the response surface methodology were in accordance with the practical validation consequences. The good regeneration effect of SFB_2-900 manifested that this material had great practical application potential. Combining the experimental results and density functional theory calculation results, the adsorption mechanisms mainly included pore filling, π-π EDA interactions, electrostatic interactions, and H-bonds. The material could be regarded as a novel and high-efficiency adsorbent for antibiotics. Additionally, these findings also provide reference for the reuse of waste biomass in water treatment.

Magnetically engineered sulfurized peat-based activated carbon for remediation of emerging pharmaceutical contaminants

Activated carbon derived from peat-based biomass was sulfurized and magnetized forming magnetically-engineered sulfurized peat-based activated carbon (MEPBAC) and used for adsorption of caffeine (CFN) and sulfamethoxazole (SMX) from aqueous media. Modification increased the surface area (724 m²/g) and introduced sulphur-groups and Fe-based nano-structures in MEPBAC. Sulphur-groups enhanced adsorption efficiency, whereas Fe-based nano-structures facilitated easy magnetic separation of MEPBAC after intended use leading to high reusability with consistent removal efficiency (∼95 %). Response surface methodology was employed for design of experiments and process optimization. The results revealed that the maximum removal (SMX 94 %; CFN 97 %) could be achieved at an adsorbent dose of 1.4 and 1.6 g/L, respectively (pH 11, 311 K). Adsorption kinetics was best explained by a pseudo-second-order kinetic model. Adsorption data of SMX was fitted better to Langmuir (linear) and Freundlich (non-linear) isotherms, whereas that of CFN was fitted well with Freundlich (linear) and Langmuir (non-linear) isotherms (R² ≥ 0.99).

Adsorptive removal of beryllium by Fe-modified activated carbon prepared from lotus leaf

Lotus leaf was used as raw material to prepare HNO₃-activated carbon with 1.5:1 (HNO₃:lotus leaf) (wt:wt) impregnation. Then, the activated carbon was modified by Fe(NO₃)₃ to obtain Fe-activated carbon (Fe-AC). The adsorption test results show that Fe-AC maximum saturated adsorption capacity (Q_m) is 45.68 mg/g when the Fe(NO₃)₃ loading is 5% of the total activated carbon, pH = 6, and the temperature is 35 ℃. The adsorption effect of Fe-AC under neutral conditions is better than that under alkaline and acidic conditions. The modified activated carbon has better adsorption selectivity. The obtained material (Fe-AC) was characterized by N₂ adsorption-desorption isotherm, SEM, FT-IR, BET, XRD, XPS, and pH_pzc. The total pore volume, specific surface area, and zero charges of modified activated carbon were increased. The types of modified functional groups were reduced, and the iron reacted with the functional groups, providing ion exchange sites for the adsorption of beryllium. The adsorption thermodynamics showed that the adsorption process was spontaneous and endothermic. The adsorption mechanism of Fe-AC to beryllium is mainly chemical adsorption.

Predicting the speciation of ionizable antibiotic ciprofloxacin by biochars with varying carbonization degrees†

Sorption mechanisms of ionizable organic pollutants by biochars and approaches for the prediction of sorption are still unclear. In this study, batch experiments were conducted to explore the sorption mechanisms of woodchip-derived biochars prepared at 200–700 °C (referred as WC200–WC700) for cationic, zwitterionic and anionic species of ciprofloxacin (referred as CIP⁺, CIP^± and CIP⁻, respectively). The results revealed that the sorption affinity of WC200 for different CIP species was in the order of CIP^± > CIP⁺ > CIP⁻, while that of WC300–WC700 remained the order of CIP⁺ > CIP^± > CIP⁻. WC200 exhibited a strong sorption ability, which could be attributed to hydrogen bonding and electrostatic attraction with CIP⁺, electrostatic attraction with CIP^±, and charge-assisted hydrogen bonding with CIP⁻. Pore filling and π–π interactions contributed to the sorption of WC300–WC700 for CIP⁺, CIP^± and CIP⁻. Rising temperature facilitated CIP sorption to WC400 as verified by site energy distribution analysis. Proposed models including the proportion of the three CIP species and sorbent aromaticity index (H/C) can quantitatively predict CIP sorption to biochars with varying carbonization degrees. These findings are vital to elucidating the sorption behaviors of ionizable antibiotics to biochars and exploring potential sorbents for environmental remediation.

This study revealed the evolution of sorption mechanisms with pyrolysis temperature of biochar and CIP speciation, and provided a novel approach for the sorption prediction of ionizable antibiotics.

Enhanced Ciprofloxacin Removal from Aqueous Solution Using a Chemically Modified Biochar Derived from Bamboo Sawdust: Adsorption Process Optimization with Response Surface Methodology

Contamination of water by ciprofloxacin has become a significant concern due to its adverse health effects and growing evidence of antimicrobial-resistant gene evolution. To this end, a chemically modified bamboo biochar was prepared from bamboo sawdust to effectively remove ciprofloxacin (CIP) from an aqueous solution. Under similar adsorption conditions, the modified bamboo biochar (MBC) has an excellent CIP removal efficiency (96%) compared to unmodified bamboo biochar (UBC) efficiency (45%). Thus, MBC was used in batch adsorption experiments, and the process was optimized with the central composite design (CCD) framework of response surface methodology (RSM). Sorption process parameters such as initial CIP concentration, pH, adsorbent dose, and contact time were studied and found to have a significant effect on CIP removal. The optimal CIP removal (96%) was obtained at MBC dose (0.5 g L-1), CIP initial concentration (20 mg L-1), pH (7.5), and contact time (46 min). The adsorption kinetic data were well described by the pseudo-second-order model ( $R^2=0.999$ ), and both Langmuir ( $R^2=0.994$ ) and Freundlich ( $R^2=0.972$ ) models gave the best fit in CIP adsorption isotherm analysis. The maximum monolayer adsorption capacity of the MBC was 78.43 mg g-1 based on the Langmuir isotherm model. These results suggest that CIP adsorption was mainly controlled by chemisorption. Moreover, the CIP adsorption process was endothermic and spontaneous. Overall, MBC is a low-cost, efficient, and recyclable adsorbent for eliminating emerging contaminants such as ciprofloxacin from an aqueous solution.

Fabrication, application, and mechanism of metal and heteroatom co-doped biochar composites (MHBCs) for the removal of contaminants in water: A review

The potential risk of various contaminants in water has recently attracted public attention. Biochars and modified biochars have been widely developed for environmental remediation. Metal and heteroatom co-doped biochar composites (MHBCs) quickly caught the interest of researchers with more active sites and higher affinity for contaminants compared to single-doped biochar by metal or heteroatoms. This study provides a comprehensive review of MHBCs in wastewater decontamination. Firstly, the main fabrication methods of MHBCs were external doping and internal doping, with external doping being the most common. Secondly, the applications of MHBCs as adsorbents and catalysts in water treatment were introduced emphatically, which mainly included the removal of metals, antibiotics, dyes, pesticides, phenols, and other organic contaminants. Thirdly, the removal mechanisms of contaminants by MHBCs were deeply discussed in adsorption, oxidation and reduction, and degradation. Furthermore, the influencing factors for the removal of contaminants by MHBCs were also summarized, including the physicochemical properties of MHBCs, and environmental variables of pH and co-existing substance. Finally, futural challenges of MHBCs are proposed in the leaching toxicity of metal from MHBCs, the choice of heteroatoms on the fabrication for MHBCs, and the application in the composite system and soil remediation.

Performance and mechanism of sycamore flock based biochar in removing oxytetracycline hydrochloride

In this study, sycamore flocs (SF), which caused environmental and health problems, were utilized to prepare biochar. SFB_2-900 obtained under the conditions of activation agent K₂CO₃, pyrolysis temperature 900℃ and m(K₂CO₃):m(BC) 2 had the strongest adsorption capacity (730 mg/g) for oxytetracycline hydrochloride (OTC-HCl). The pseudo-second-order kinetic model and Langmuir model described the adsorption kinetics and isotherms best. SFB_2-900 exhibited high OTC-HCl adsorption capacity in both higher ionic strength and wide pH range. The theoretical simulation indicated that the closest interaction distance between OTC-HCl and SFB_2-900 was 2.44 Å via π-π stacking configuration. Pore filling, π-π electron donor acceptor (EDA) interaction, H-bonding and electrostatic interactions were also involved in the process of OTC-HCl removal. SFB_2-900 showed great removal efficiency for OTC-HCl in different water matrices and good regeneration ability. This study solved the problems caused by SF, realized waste biomass recycling, and achieved preparing high-efficient adsorbent for antibiotic.