Microbial community assembly and dynamics in Granular, Fixed-Biofilm and planktonic microbiomes valorizing Long-Chain fatty acids at 20 °C

Biofilm application for anaerobic digestion: a systematic review and an industrial scale case

Biofilm is a syntrophic community of microorganisms enveloped by extracellular polymeric substances and displays remarkable adaptability to dynamic environments. Implementing biofilm in anaerobic digestion has been widely investigated and applied as it promotes microbial retention time and enhances the efficiency. Previous studies on anaerobic biofilm primarily focused on application in wastewater treatment, while its role has been significantly extended to accelerate the degradation of lignocellulosic biomass, improve gas-liquid mass transfer for biogas upgrading, or enhance resistance to inhibitors or toxic pollutants. This work comprehensively reviewed the current applications of biofilm in anaerobic digestion and focused on impacting factors, optimization strategies, reactor set-up, and microbial communities. Moreover, a full-scale biofilm reactor case from Norway is also reported. This review provides a state of-the- art insight on the role of biofilm in anaerobic digestion.

Distinct microbial characteristics of the robust single-stage coupling system during the conversion from anammox-denitritation to anammox-denitratation patterns

Simultaneous anammox-denitrification is effectively operated in two types, i.e., the anammox-denitritation (SAD pattern) and the anammox-denitratation (PDA pattern). The nitrate derived from inevitable nitrite oxidization likely determines the practical operational pattern of the coupling system, while little information is available regarding the microbial characteristics during the pattern conversion. Here, the single-stage bioreactor coupling anammox with denitrification was operated under conditions with a changed ratio of influent nitrite and nitrate. Results showed that the bioreactor exhibited a robust performance during the conversion from SAD to PDA patterns, corresponding with the total nitrogen removal efficiency ranging from 89.5% to 92.4%. Distinct community structures were observed in two patterns, while functional bacteria including the genera Denitratisoma, Thauera, Candidatus Brocadia, and Ca. Jettenia steadily co-existed. Meanwhile, the high transcription of hydrazine synthase genes demonstrated a stable anammox process, while the up-regulated transcription of nitrite and nitrous oxide reductase genes indicated that the complete denitrification process was enhanced for total nitrogen removal during the PDA pattern. Ecologically, stochastic processes dominantly governed the community assembly in two patterns. The PDA pattern improved the interconnectivity of communities, especially for the cooperative behaviors between dominant denitrifying bacteria and low-abundant species. These findings deepen our understanding of the microbial mechanism underlying the different patterns of the coupling system and potentially expand its engineering application.

Unifying concepts in methanogenic, aerobic, and anammox sludge granulation

The retention of dense and well-functioning microbial biomass is crucial for effective pollutant removal in several biological wastewater treatment technologies. High solids retention is often achieved through aggregation of microbial communities into dense, spherical aggregates known as granules, which were initially discovered in the 1980s. These granules have since been widely applied in upflow anaerobic digesters for waste-to-energy conversions. Furthermore, granular biomass has been applied in aerobic wastewater treatment and anaerobic ammonium oxidation (anammox) technologies. The mechanisms underpinning the formation of methanogenic, aerobic, and anammox granules are the subject of ongoing research. Although each granule type has been extensively studied in isolation, there has been a lack of comparative studies among these granulation processes. It is likely that there are some unifying concepts that are shared by all three sludge types. Identifying these unifying concepts could allow a unified theory of granulation to be formed. Here, we review the granulation mechanisms of methanogenic, aerobic, and anammox granular sludge, highlighting several common concepts, such as the role of extracellular polymeric substances, cations, and operational parameters like upflow velocity and shear force. We have then identified some unique features of each granule type, such as different internal structures, microbial compositions, and quorum sensing systems. Finally, we propose that future research should prioritize aspects of microbial ecology, such as community assembly or interspecies interactions in individual granules during their formation and growth.

Influence of pH, Heat Treatment of Inoculum, and Selenium Oxyanions on Concomitant Selenium Bioremediation and Volatile Fatty Acid Production from Food Waste

Developing novel strategies to enhance volatile fatty acid (VFA) yield from abundant waste resources is imperative to improve the competitiveness of biobased VFAs over petrochemical-based VFAs. This study hypothesized to improve the VFA yield from food waste via three strategies, viz., pH adjustment (5 and 10), supplementation of selenium (Se) oxyanions, and heat treatment of the inoculum (at 85 °C for 1 h). The highest VFA yield of 0.516 g COD/g VS was achieved at alkaline pH, which was 45% higher than the maximum VFA production at acidic pH. Heat treatment resulted in VFA accumulation after day 10 upon alkaline pretreatment. Se oxyanions acted as chemical inhibitors to improve the VFA yield at pH 10 with non-heat-treated inoculum (NHT). Acetic and propionic acid production was dominant at alkaline pH (NHT); however, the VFA composition diversified under the other tested conditions. More than 95% Se removal was achieved on day 1 under all the conditions tested. However, the heat treatment was detrimental for selenate reduction, with less than 15% Se removal after 20 days. Biosynthesized Se nanoparticles were confirmed by transmission and scanning electron microscopy and and energy dispersive X-ray analyses. The heat treatment inhibited the presence of nonsporulating bacteria and methanogenic archaea (Methanobacteriaceae). High-throughput sequencing also revealed higher relative abundances of the bacterial families (such as Clostridiaceae, Bacteroidaceae, and Prevotellaceae) that are capable of VFA production and/or selenium reduction.

Molecular insights informing factors affecting low temperature anaerobic applications: Diversity, collated core microbiomes and complexity stability relationships in LCFA-fed systems

Fats, oil and grease, and their hydrolyzed counterparts-long chain fatty acids (LCFA) make up a large fraction of numerous wastewaters and are challenging to degrade anaerobically, more so, in low temperature anaerobic digestion (LtAD) systems. Herein, we perform a comparative analysis of publicly available Illumina 16S rRNA datasets generated from LCFA-degrading anaerobic microbiomes at low temperatures (10 and 20 °C) to comprehend the factors affecting microbial community dynamics. The various factors considered were the inoculum, substrate and operational characteristics, the reactor operation mode and reactor configuration, and the type of nucleic acid sequenced. We found that LCFA-degrading anaerobic microbiomes were differentiated primarily by inoculum characteristics (inoculum source and morphology) in comparison to the other factors tested. Inoculum characteristics prominently shaped the species richness, species evenness and beta-diversity patterns in the microbiomes even after long term operation of continuous reactors up to 150 days, implying the choice of inoculum needs careful consideration. The generalised additive models represented through beta diversity contour plots revealed that psychrophilic bacteria RBG-13-54-9 from family Anaerolineae, and taxa WCHB1-41 and Williamwhitmania were highly abundant in LCFA-fed microbial niches, suggesting their role in anaerobic treatment of LCFAs at low temperatures of 10-20 °C. Overall, we showed that the following bacterial genera: uncultured Propionibacteriaceae, Longilinea, Christensenellaceae R7 group, Lactivibrio, candidatus Caldatribacterium, Aminicenantales, Syntrophus, Syntrophomonas, Smithella, RBG-13-54-9, WCHB1-41, Trichococcus, Proteiniclasticum, SBR1031, Lutibacter and Lentimicrobium have prominent roles in LtAD of LCFA-rich wastewaters at 10-20 °C. This study provides molecular insights of anaerobic LCFA degradation under low temperatures from collated datasets and will aid in improving LtAD systems for treating LCFA-rich wastewaters.

Biofilm thickness controls the relative importance of stochastic and deterministic processes in microbial community assembly in moving bed biofilm reactors

Deterministic and stochastic processes are believed to play a combined role in microbial community assembly, though little is known about the factors determining their relative importance. We investigated the effect of biofilm thickness on community assembly in nitrifying moving bed biofilm reactors using biofilm carriers where maximum biofilm thickness is controlled. We examined the contribution of stochastic and deterministic processes to biofilm assembly in a steady state system using neutral community modelling and community diversity analysis with a null-modelling approach. Our results indicate that the formation of biofilms results in habitat filtration, causing selection for phylogenetically closely related community members, resulting in a substantial enrichment of Nitrospira spp. in the biofilm communities. Stochastic assembly processes were more prevalent in biofilms of 200 µm and thicker, while stronger selection in thinner (50 µm) biofilms could be driven by hydrodynamic and shear forces at the biofilm surface. Thicker biofilms exhibited greater phylogenetic beta-diversity, which may be driven by a variable selection regime caused by variation in environmental conditions between replicate carrier communities, or by drift combined with low migration rates resulting in stochastic historical contingency during community establishment. Our results indicate that assembly processes vary with biofilm thickness, contributing to our understanding of biofilm ecology and potentially paving the way towards strategies for microbial community management in biofilm systems.

Homogeneously and heterogeneously structured biofilm models for wastewater treatment

Biofilm, a layer comprising extracellular polymeric substances, is the platform where the embedded living cells degrade the substances in the wastewaters. Biofilm models have been developed as part of the comprehensive models for the wastewater treatment process. This review summarizes the biofilm models applied in contemporary literature based on the spatial dimensions adopted for model build-up. The most commonly applied biofilm models are null-dimensional, considering the biofilm active biomass for the substrate sink's biological reaction. The one-dimensional, multi-species models are the second standard models for contemporary studies, providing transport and reaction resistances of substrates in the biofilm matrix and the interactions of competing or collaborating strains in the biofilm. The structural homogeneity of the biofilm challenges the validity of the uniformly structured models, highlighting the need to re-examine the validity of the uniformly structured models. The challenges and prospects of biofilm model developments and applications are outlined.

Principles, Advances, and Perspectives of Anaerobic Digestion of Lipids

Several problems associated with the presence of lipids in wastewater treatment plants are usually overcome by removing them ahead of the biological treatment. However, because of their high energy content, waste lipids are interesting yet challenging pollutants in anaerobic wastewater treatment and codigestion processes. The maximal amount of waste lipids that can be sustainably accommodated, and effectively converted to methane in anaerobic reactors, is limited by several problems including adsorption, sludge flotation, washout, and inhibition. These difficulties can be circumvented by appropriate feeding, mixing, and solids separation strategies, provided by suitable reactor technology and operation. In recent years, membrane bioreactors and flotation-based bioreactors have been developed to treat lipid-rich wastewater. In parallel, the increasing knowledge on the diversity of complex microbial communities in anaerobic sludge, and on interspecies microbial interactions, contributed to extend the knowledge and to understand more precisely the limits and constraints influencing the anaerobic biodegradation of lipids in anaerobic reactors. This critical review discusses the most important principles underpinning the degradation process and recent key discoveries and outlines the current knowledge coupling fundamental and applied aspects. A critical assessment of knowledge gaps in the field is also presented by integrating sectorial perspectives of academic researchers and of prominent developers of anaerobic technology.

Bioconversion of waste-to-resources (BWR-2021): Valorization of industrial and agro-wastes to fuel, feed, fertilizer, and biobased products

The mitigation of greenhouse gas (GHG) emission is one of the major focuses of The Glasgow Climate Pact, a global agreement that is believed to accelerate climate action. Following the energy sector, industrial and agro-wastes are the major contributors to global GHG emission. With the rapid growth in population, affluence, and urbanization, the GHG emission from waste sector is likely to be further aggravated if timely measures are not taken to address this burning issue. Thus, a significant research and development efforts are being made in shifting conventional waste treatment approach to resource recovery from waste, incorporating a circular bioeconomy concept. There have been significant advances in technologies such as anaerobic digestion, composting, pyrolysis, algae farming, and microbial fuel cell for recovering resources from organic wastes. This virtual special issue (VSI), "Bioconversion of Waste-to-Resources (BWR-2021)", contains 25 manuscripts covering various aspects of wastes and residual biomass valorization to high value products, including development of new technologies, optimization of current technologies for more efficient utilization of wastes and residues. The key findings of each manuscript are briefly summarized here, which can serve as a valuable resource for researchers in the field of resource recovery from wastes.