The startup of the partial nitritation/anammox-hydroxyapatite process based on reconciling biomass and mineral to form the novel granule sludge

Enhancing single-stage partial nitritation-anammox process with airlift inner-circulation and oxygen partition: A novel strategy for treating high-strength ammonium wastewater

In the single-stage partial nitritation-anammox process for high-ammonium wastewater treatment, the presence of sufficient biomass with high activity is essential. This study developed an innovative airlift inner-circulation partition bioreactor (AIPBR) with a dual-cylinder structure. During the 362 days' operation, the AIPBR exhibited robust and stable nitrogen removal performance under diverse influent ammonium spanning from 300 to 1800 mg N/L. Notably, when the influent ammonium was 1820 ± 34 mg N/L, the nitrogen removal rate reached 3.194 ± 0.074 kg N/m³/d, accompanied by removal efficiency of 87.6 ± 1.5%. The unique design of the reactor enabled the formation of dissolved oxygen gradient, which improved the synergy of functional microorganisms by facilitating mass transfer within the sludge. Additionally, it maintained appropriate hydraulic shear in the inner cylinder to support granule formation and simultaneously reduced excessive flow in the outer cylinder to prevent sludge loss. Through the cyclic granulation, the system fostered a symbiotic consortium of flocculent and granular sludge with particle size predominantly distributed within the range of 200-400 μm, which enhanced the activity of microorganisms. These findings highlight the potential of AIPBR as a novel and effective strategy for high-ammonium wastewater treatment.

Wastewater treatment optimization utilizing polyvinyl alcohol cryogel immobilized microalgae for nutrient removal

This study investigated the use of polyvinyl alcohol (PVA) cryogels to immobilize microalgae for wastewater treatment. Chlorella sorokiniana was successfully entrapped in PVA cryogels via repeated freeze/thaw cycles. The nutrient removal efficiency of these cryogels was tested in a continuously stirred photobioreactor under varying conditions, both with and without the addition of an organic carbon source (sodium acetate). The presence of organic carbon significantly enhanced nutrient removal. Specifically, PVA cryogels with immobilized C. sorokiniana achieved 100% nitrogen removal and 97.2% phosphorus removal under mixotrophic conditions. Furthermore, the maximum nutrient removal capacities of the PVA cryogels were found to be 0.033 mg-N/cube·day for nitrogen and 0.0047 mg-P/cube·day for phosphorus. As the inorganic carbon (bicarbonate) concentration increased from 5 to 100 mg/L, the N/P ratio rose from 6 to 8, with a higher N/P ratio of 10 observed when nitrate nitrogen was used as the nitrogen source, compared to ammonia nitrogen, at 100 mg/L bicarbonate. This study offers an effective method for using microalgae immobilized in PVA cryogels for wastewater treatment. The findings highlight the potential for PVA cryogels to significantly improve nutrient removal efficiency, particularly in the presence of organic carbon sources, thereby enhancing bioreactor performance. High nitrogen and phosphorus removal efficiencies can help reduce eutrophication in water bodies, protect aquatic ecosystems, and enable nutrient recovery and reuse, supporting a circular economy in wastewater treatment practices.

Towards advanced simultaneous nitrogen removal and phosphorus recovery from digestion effluent based on anammox-hydroxyapatite (HAP) process: Focusing on a solution perspective

In this paper, the state-of-the-art information on the anammox-HAP process is summarized. The mechanism of this process is systematically expounded, the enhancement of anammox retention by HAP precipitation and the upgrade of phosphorus recovery by anammox process are clarified. However, this process still faces several challenges, especially how to deal with the ∼ 11% nitrogen residues and to purify the recovered HAP. For the first time, an anaerobic fermentation (AF) combined with partial denitrification (PD) and anammox-HAP (AF-PD-Anammox-HAP) process is proposed to overcome the challenges. By AF of the organic impurities of the anammox-HAP granular sludge, organic acid is produced to be used as carbon source for PD to remove the nitrogen residues. Simultaneously, pH of the solution drops, which promotes the dissolution of some inorganic purities such as CaCO₃. In this way, not only the inorganic impurities are removed, but the inorganic carbon is supplied for anammox bacteria.

Robustness and stability of acetate-driven partial denitrification (PD) in response to high COD/NO3--N

Partial Denitrification (PD) producing nitrite for anammox may face the issue of relatively high chemical oxygen demand (COD) loading (i.e., COD/NO₃^--N) due to real wastewater being changed in substrate concentration and flowrate. In this study, three PD systems (R1, R2, R3) with sodium acetate providing electrons were developed to investigate the influence of the relatively high COD/NO₃^--N ratios (4.0, 6.0, and 8.0) on NO₂^--N production and the subsequent recoverability. It was found that a relatively high NO₂^--N production with nitrate-to-nitrite transformation ratio (NTR) of 74.0% could be still obtained despite COD/NO₃^--N even improving to 8.0 under limited reaction time (10 min) with small nitrate remaining. However, a deteriorated nitrite production was observed with sufficient reaction time (15 min) with NTR being lowered to 19.2%. Delightedly, when reducing influent COD/NO₃^--N to a normal level of 3.0, PD with high nitrite production was rapidly achieved after suffering from a relatively high COD/NO₃^--N (4.0-8.0) for 130 cycles. Besides, it was found the relatively high COD/NO₃^--N had a minor influence on the recoverability of PD, as evidenced by the close NTRs. Microbial analysis revealed the relative abundance of PD functional bacteria, Thauera, decreased under high COD/NO₃^--N, while it is still highly dominated in the systems, varying from 75.1% in R1 to 62.8% in R3 after around 110-cycles recovery. Furthermore, it appeared that the high pH (9.1-9.2) induced by sodium acetate also likely played a role in maintaining the excellent PD. Overall, this study demonstrated the robustness and stability of acetate-driven PD in response to high COD/NO₃^--N, further informing the technological superiority of PD in supplying stable and efficient nitrite, which provided solid technical support to apply it with anammox for high-efficient N removal.

Gel-immobilized partial nitritation/anammox achieves reliable nitrogen removal at different concentrations of nitrogen and reactivation processes

A two-stage partial nitritation/anammox process based on microbial encapsulation (PN/A-E) was established. The nitrogen removal characteristics of PN/A-E under high and low ammonia nitrogen and after reactivation following a long-term shutdown were comprehensively investigated and compared with anammox granular sludge (AnGS). The stable PN process did not depend on high ammonia nitrogen, and the nitrite accumulation rate reached 95.2 ± 0.7 %. The overall nitrogen removal rate of encapsulated anammox bacteria was twice that of the AnGS, and it was more tolerant to external interference. Moreover, PN/A-E showed good reactivation performance, and the total nitrogen in the effluent was 10.0 ± 1.4 mg·L^-1 when the final hydraulic retention time was 2.18 h. The immobilized fillers support an increase in ammonia-oxidizing bacteria under restricted conditions and were more conducive to the dominance of functional bacteria and the stability of microbial community under low ammonia nitrogen. This study provides a positive method to achieve a reliable PN/A.

Bioconversion of biowaste into renewable energy and resources: A sustainable strategy

Due to its high amount of organic and biodegradable components that can be recycled, biowaste is not only a major cause of environmental contamination, but also a vast store of useful materials. The transformation of biowaste into energy and resources via biorefinery is an unavoidable trend, which could aid in reducing carbon emissions and alleviating the energy crisis in light of dwindling energy supplies and mounting environmental difficulties related with solid waste. In addition, the current pandemic and the difficult worldwide situation, with their effects on the economic, social, and environmental aspects of human life, have offered an opportunity to promote the transition to greener energy and sources. In this context, the current advancements and possible trends of utilizing widely available biowaste to produce key biofuels (such as biogas and biodiesel) and resources (such as organic acid, biodegradable plastic, protein product, biopesticide, bioflocculant, and compost) are studied in this review. To achieve the goal of circular bioeconomy, it is necessary to turn biowaste into high-value energy and resources utilizing biological processes. In addition, the usage of recycling technologies and the incorporation of bioconversion to enhance process performance are analyzed critically. Lastly, this work seeks to reduce a number of enduring obstacles to the recycling of biowaste for future use in the circular economy. Although it could alleviate the global energy issue, additional study, market analysis, and finance are necessary to commercialize alternative products and promote their future use. Utilization of biowaste should incorporate a comprehensive approach and a methodical style of thinking, which can facilitate product enhancement and decision optimization through multidisciplinary integration and data-driven techniques.

Role of multistage inoculation on the co-composting of food waste and biogas residue

Effect of diverse Lactobacillus amylophilus, Geobacillus thermoleovorans, and Bacillus subtilis inoculation patterns on the co-composting performance of food waste and biogas residue was explored. Experimental results revealed that, compared to the single-stage inoculation and non-inoculation groups, the multistage inoculation pattern prolonged the thermophilic period during composting, consequently improving organic matter decomposition and humification [with a high germination index (120.9%)]. In addition, it could promote the development of humic substances [with a high humus index (4.3) and biological index (1.4)] and lower emissions of carbon dioxide (CO₂), methane (CH₄), and ammonia (NH₃). Additionally, it could improve the microbial variety and the amounts of functional bacteria (i.e., Chloroflexi) in compost, which might be advantageous for the decomposition of refractory organic materials and plant growth. Therefore, the multistage inoculation pattern is recommended for organic waste composting in terms of its gas emissions, compost quality and efficacy benefits.

Biodrying of biogas residue through a thermophilic bacterial agent inoculation: Insights into dewatering contribution and microbial mechanism

Biogas residue (BR) is difficult to transport and compost due to its high moisture content. The purpose of this study was to elucidate the dewatering and microbial mechanisms underlying the inoculation of a thermophilic bacterial agent (TBA) onto BR with a high moisture content (i.e., 90.4%). TBA accounted for 78.7% of the water loss rate in BR, dramatically higher than the effects of aeration, external heat, or indigenous microorganisms (i.e., 1.8%, 0.1%, and 19.4%, respectively). Furthermore, TBA inoculation resulted in a stable product [with a low moisture content (9.4%) and a high seed germination index (107.3%)]. Finally, TBA increased microbial diversity and the abundance of functional bacteria (Proteobacteria and Bacteroidota), which might be beneficial for refractory organic compound decomposition and plant growth. Thus, biodrying BR via inoculation with a TBA is recommended economically.