Preparation of biosorbent for the removal of organic dyes from aqueous solution via one-step alkaline ball milling of hickory wood

Efficient removal of congo red and cytotoxicity evaluation of biosorbents prepared from chitosan-added watermelon pulp

The development of environmentally friendly adsorbents has become increasingly important for treating waste generated by the growing global industry. In this study, new biosorbents were synthesized from an all-natural chitosan and watermelon pulp for the treatment of congo red textile dye from water. Biosorbents were prepared by lyophilizing chitosan-added watermelon pulp (AC-WPC). The prepared biosorbents were characterized by BET, SEM, Zeta Potential and FT-IR analysews. Accordingly, the BET surface area of AC-WPC was 120.92 m2/g. SEM analysis showed that the structures were porous and the results were consistent with the BET analysis. FT-IR analysis confirmed the chemical structures. The isoelectric points of the biosorbents were determined by zeta potential analysis. The AC-WPC biosorbent demonstrated 86% cell viability with cytotoxicity testing. For this reason, it was determined that the AC-WPC biosorbents produced does not cause any serious damage to the cell. Following this, adsorption study of congo red textile dye in water was carried out with these biosorbents. Langmuir and Freundlich isotherms were studied in adsorption experiments, and it was found that the Freundlich isotherms were compatible. Pseudo first and second kinetic models were also studied and found to be compatible with Pseudo Second Kinetic Model. The highest adsorption capacity was observed at 100 mg/l congo red concentration with 98.02% removal and 490.1 mg/g adsorption capacity using AC-WPC. It is thought that these results will potentially contribute to the literature on the removal of textile dyes or other pollutants using chitosan-added watermelon pulp.

Removing Heavy Metals: Cutting-Edge Strategies and Advancements in Biosorption Technology

This article explores recent advancements and innovative strategies in biosorption technology, with a particular focus on the removal of heavy metals, such as Cu(II), Pb(II), Cr(III), Cr(VI), Zn(II), and Ni(II), and a metalloid, As(V), from various sources. Detailed information on biosorbents, including their composition, structure, and performance metrics in heavy metal sorption, is presented. Specific attention is given to the numerical values of the adsorption capacities for each metal, showcasing the efficacy of biosorbents in removing Cu (up to 96.4%), Pb (up to 95%), Cr (up to 99.9%), Zn (up to 99%), Ni (up to 93.8%), and As (up to 92.9%) from wastewater and industrial effluents. In addition, the issue of biosorbent deactivation and failure over time is highlighted as it is crucial for the successful implementation of adsorption in practical applications. Such phenomena as blockage by other cations or chemical decomposition are reported, and chemical, thermal, and microwave treatments are indicated as effective regeneration techniques. Ongoing research should focus on the development of more resilient biosorbent materials, optimizing regeneration techniques, and exploring innovative approaches to improve the long-term performance and sustainability of biosorption technologies. The analysis showed that biosorption emerges as a promising strategy for alleviating pollutants in wastewater and industrial effluents, offering a sustainable and environmentally friendly approach to addressing water pollution challenges.

Effective Removal of Dyes from Wastewater by Osmanthus Fragrans Biomass Charcoal

The exploration of low-cost, high-performance adsorbents is a popular research issue. In this work, a straightforward method that combined hydrothermal with tube firing was used to produce Osmanthus fragrans biomass charcoal (OBC) from low-cost osmanthus for dye adsorption in water. The study examined the parameters of starting concentration, pH, and duration, which impacted the process of adsorption of different dyes by OBC. The analysis showed that the adsorption capacities of OBC for six dyes: malachite green (MG, C0 = 800 mg/L, pH = 7), Congo red (CR, C0 = 1000 mg/L, pH = 8), rhodamine B (RhB, C0 = 500 mg/L, pH = 6), methyl orange (MO, C0 = 1000 mg/L, pH = 7), methylene blue (MB, C0 = 700 mg/L, pH = 8), and crystalline violet (CV, C0 = 500 mg/L, pH = 7) were 6501.09, 2870.30, 554.93, 6277.72, 626.50, and 3539.34 mg/g, respectively. The pseudo-second-order model and the Langmuir isotherm model were compatible with the experimental findings, which suggested the dominance of ion exchange and chemisorption. The materials were characterized by using XRD, SEM, FTIR, BET, and XPS, and the results showed that OBC had an outstanding specific surface area (2063 m2·g-1), with potential adsorption mechanisms that included electrostatic mechanisms, hydrogen bonding, and π-π adsorption. The fact that the adsorption capacity did not drastically decrease after five cycles of adsorption and desorption suggests that OBC has the potential to be a dye adsorbent.

A review on algae biosorption for the removal of hazardous pollutants from wastewater: Limiting factors, prospects and recommendations

Heavy metals, dyes and pharmaceutical pollutants in water environment are considered as serious threat to the human and animal health globally. Rapid development of industrialization and agricultural activities are the major source for eliminating the toxic pollutants into the aquatic environment. Several conventional treatment methods have been suggested for the removal of emerging contaminants from wastewater. Algal biosorption, among other strategies and techniques, is demonstrating to be a limited technical remedy that is more focused and inherently more efficient and helps remove dangerous contaminants from water sources. The different environmental effects of harmful contaminants, including heavy metals, dyes, and pharmaceutical chemicals, as well as their sources, were briefly compiled in the current review. This paper provides a comprehensive definition of the future possibilities in heavy compound decomposition by using algal technology, from aggregation to numerous biosorption procedures. Functionalized materials produced from algal sources were clearly proposed. This review further highlights the limiting factors of algal biosorption to eliminate the hazardous material. Finally, this study showed how the existence of algae indicates a potential, effective, affordable, and sustainable sorbent biomaterial for minimizing environmental pollution.

Durable superhydrophobic/superoleophilic melamine foam based on biomass-derived porous carbon and multi-walled carbon nanotube for oil/water separation

In the present study, fabrications of two eco-friendly superhydrophobic/superoleophilic recyclable foamy-based adsorbents for oil/water mixture separation were developed. Hierarchically biomass (celery)-derived porous carbon (PC) and multi-walled carbon nanotube (MWCNT) were firstly synthesized and loaded on pristine melamine foam (MF) by the simple dip-coating approach by combining silicone adhesive to create superhydrophobic/superoleophilic, recyclable, and reusable three-dimensional porous structure. The prepared samples have a large specific surface area of 240 m²/g (MWCNT), 1126 m²/g (PC), and good micro-mesoporous frameworks. The water contact angle (WCA) values of the as-prepared foams, PC/MF and MWCNT/MF, not only were 159.34° ± 1.9° and 156.42° ± 1.6°, respectively but also had oil contact angle (OCA) of equal to 0° for a wide range of oils and organic solvents. Therefore, PC/MF and MWCNT/MF exhibited superhydrophobicity and superoleophilicity properties, which can be considered effective adsorbents in oil/water mixture separations. In this context, superhydrophobic/superoleophilic prepared foams for kind of different oils and organic solvents were shown to have superior separation performance ranges of 54-143 g/g and 46-137 g/g for PC/MF and MWCNT/MF, respectively, suggesting a new effective porous material for separating oil spills. Also, outstanding recyclability and reusability of these structures in the ten adsorption-squeezing cycles indicated that the WCA and sorption capacity has not appreciably changed after soaking into acidic (pH = 2) and alkaline (pH = 12) as well as saline (3.5% NaCl) solutions. More importantly, the reusability and chemical durability of the superhydrophobic samples made them good opportunities for use in different harsh conditions for oil-spill cleanup.

Biochar Derived from Chinese Herb Medicine Residues for Rhodamine B Dye Adsorption

In this study, one well-known CHM residue (Atropa belladonna L., ABL) was used to prepare biochar capable of adsorbing rhodamine B (RhB) with an ultrahigh surface area for the first time. Three micropore-rich ABL biochars including ABL@ZnCl₂ (1866 m²/g), ABL@H₃PO₄ (1488 m²/g), and ABL@KOH (590 m²/g) were obtained using the one-step carbonization method with activation agents (ZnCl₂, H₃PO₄, and KOH) via chemical activation and carbonization at 500 °C, and their adsorption performance for RhB was systematically studied with adsorption kinetics, isotherms, and thermodynamics. Through pore diffusion, π-π interaction, and hydrogen bonding, ABL biochar had excellent adsorption performance for RhB. Moreover, when C ₀ was 200 mg/L, biochar dosage was 1 g/L, and the contact time was 120 min; the maximum RhB adsorption capacity and removal efficiency on ABL@ZnCl₂ and ABL@H₃PO₄ were 190.63 mg/g, 95% and 184.70 mg/g, 92%, respectively, indicating that it was feasible to prepare biochar from the ABL residue for RhB adsorption. The theoretical maximum adsorption capacities of ABL@ZnCl₂ and ABL@H₃PO₄ for RhB were 263.19 mg/g and 309.11 mg/g at 25 °C, respectively. Furthermore, the prepared biochar showed good economic applicability, with pay back of USD 972/t (ABL@ZnCl₂) and USD 987/t (ABL@H₃PO₄), respectively. More importantly, even after five cycles, ABL@H₃PO₄ biochar still showed great RhB removal efficiency, suggesting that it had a good application prospect and provided a new method for the resource utilization of traditional CHM residues. Additionally, pore diffusion, π-π interactions, and hydrogen bonding all play roles in the physical adsorption of RhB on ABL biochar. π-π interactions dominated in the early stage of RhB adsorption on ABL@H₃PO₄, while pore diffusion played a crucial role in the whole adsorption process on both adsorbents.

Characteristics and aqueous dye removal ability of novel biosorbents derived from acidic and alkaline one-step ball milling of hickory wood

New classes of biosorbents are needed for various environment remediation applications. Thus, a facile and benign approach to synthesize porous biosorbents was developed using acidic or alkaline one-step ball milling of hickory wood biomass (AcBH and AlBH, respectively) without any external heat treatment, and their properties were compared. AcBH and AlBH were richer in O-containing functional groups, had enhanced porous structure and greater ability to remove crystal violet (CV, 476.4 mg g^-1) and Congo red (CR, 221.8 mg g^-1) dyes from aqueous solution, respectively, relative to hickory wood ball milled at neutral pH. Freundlich isotherm and pseudo second order kinetic models best fitted CR and CV adsorption onto biosorbents, indicating a mainly surface complexation adsorption mechanism. Further, both sorbents exhibited excellent stability and dye adsorption reusability. These results demonstrate that acidic and alkaline one-step ball milling is a facile and efficient approach for converting wood biomass into environmentally friendly biosorbents.