Waste biomass based potential bioadsorbent for lead removal from simulated wastewater

Preparation and Performance Research of Pb(II)-Imprinted Acrylonitrile-Co-Acrylic Acid Composite Material with Modified Sand Particles as Carrier

Lead (Pb) is classified as a prevalent metallic pollutant, significantly impacting the ecological environment, especially human health. Consequently, it is crucial to develop adsorbent materials that are environmentally friendly, cost-effective, and which possess high selectivity. This study aims to fabricate a Pb(II)-imprinted acrylonitrile-co-acrylic acid composite material by using modified sand particles as the carrier, and then to investigate its properties. Through pretreatment of sand particles, acrylonitrile and acrylic acid were polymerized on the surface of modified sand particles, and Pb(II) served as a template ion for imprinting. A variety of characterization methods were used to verify the composite material and conduct an analysis of its morphology, chemical composition, and pore characteristics. The adsorption efficiency of this composite material for Pb(II) is comprehensively explored, with the process involving adsorption kinetics, adsorption isotherms, selective adsorption, and reuse experiments. Through static adsorption experiments, multiple elements influencing the adsorption ability of the composite material towards Pb(II) are investigated. It was demonstrated by the results that the composite material prepared possesses a rich pore structure and excellent Pb(II) recognition ability. The investigation on adsorption kinetics is in line with the quasi-first-order and quasi-second-order kinetic models, while the adsorption isotherm, obeys the Langmuir model. The ideal adsorption conditions were pH = 7, with the adsorption reaching equilibrium within 105 min. Even when multiple interfering ions were present, it still had high selectivity for Pb(II). The composite material showed an adsorption saturation capability reaching 41.83 mg·g-1, considerably surpassing the non-imprinted counterpart. After being reused eight times, the composite material can still maintain an adsorption efficiency for Pb(II) that is above 79% and demonstrates high potential in the practical application environment.

Chloride converts lead slag into a bifunctional material to remove heavy metals

Efficient and safe removal of arsenic and lead from industrial wastewater is essential for ecological protection. In this study, we developed a novel method using lead slag as a purifying agent and sodium chloride as a reinforcing agent to remove arsenic and lead from industrial wastewater. Through a combination of experiments and simulations, we elucidated the mechanisms involved in this reaction. The initial concentrations of As and Pb ions in the industrial wastewater were 4333 and 188 mg/L, respectively. After the reaction at 25 °C and a pH ranging from 9.7 to 10, the concentrations of arsenic and lead were reduced to 4.9 mg/L and 0.008 mg/L, respectively, achieving a removal rate of 99.9%. Our experimental results demonstrated that Pb2+ and AsO43- ions released from the lead slag and industrial wastewater reacted with Cl- ions to form Pb5(AsO4)3Cl precipitates, thus effectively eliminating a significant amount of As and Pb species. Simulation studies indicated that Pb5(AsO4)3Cl exhibited exceptional stability below 400 °C and could be directly stored. Additionally, the lead slag, which is rich in silica, played a crucial role in removing and stabilizing As and Pb ions. Under alkaline conditions, silica encapsulated the As and Pb species, adhering to the surface of the Pb-As co-precipitates and forming dense, irregular, small particles with internal and external structures that impeded the efflux of As and Pb ions. This phenomenon was confirmed through scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The kinetics of As and Pb ion removal was consistent with the pseudo-second-order kinetic model, indicating that the removal process was primarily governed by chemical interactions. Lead slag exhibits significant potential and advantages in the removal of As and Pb. This innovative method offers an effective approach to address heavy metal contamination in industrial wastewater, thus contributing to ecological protection.

Enhanced adsorptive removal of rifampicin and tigecycline from single system using nano-ceria decorated biochar of mango seed kernel

Pharmaceutically active compounds (PhACs) represent an emerging class of contaminants. With a potential to negatively impact human health and the ecosystem, existence of pharmaceuticals in the aquatic systems is becoming a worrying concern. Antibiotics is a major class of PhACs and their existence in wastewater signifies a health risk on the long run. With the purpose of competently removing antibiotics from wastewater, cost-effective, and copiously available waste-derived adsorbents were structured. In this study, mango seeds kernel (MSK), both as a pristine biochar (Py-MSK) and as a nano-ceria-laden (Ce-Py-MSK) were applied for the remediation of rifampicin (RIFM) and tigecycline (TIGC). To save time and resources, adsorption experiments were managed using a multivariate-based scheme executing the fractional factorial design (FrFD). Percentage removal (%R) of both antibiotics was exploited in terms of four variables: pH, adsorbent dosage, initial drug concentration, and contact time. Preliminary experiments showed that Ce-Py-MSK has higher adsorption efficiency for both RIFM and TIGC compared to Py-MSK. The %R was 92.36% for RIFM compared to 90.13% for TIGC. With the purpose of comprehending the adsorption process, structural elucidation of both sorbents was performed using FT-IR, SEM, TEM, EDX, and XRD analyses which confirmed the decoration of the adsorbent surface with the nano-ceria. BET analysis revealed that Ce-Py-MSK has a higher surface area (33.83 m²/g) contrasted to the Py-MSK (24.72 m²/g). Isotherm parameters revealed that Freundlich model best fit Ce-Py-MSK-drug interactions. A maximum adsorption capacity (q_m) of 102.25 and 49.28 mg/g was attained for RIFM and TIGC, respectively. Adsorption kinetics for both drugs conformed well with both pseudo-second order (PSO) and Elovich models. This study, therefore, has established the suitability of Ce-Py-MSK as a green, sustainable, cost-effective, selective, and efficient adsorbent for the treatment of pharmaceutical wastewater.

Removal of Lead from Wastewater Using Synthesized Polyethyleneimine-Grafted Graphene Oxide

In this work, polyethyleneimine-grafted graphene oxide (PEI/GO) is synthesized using graphene, polyethyleneimine, and trimesoyl chloride. Both graphene oxide and PEI/GO are characterized by a Fourier-transform infrared (FTIR) spectrometer, a scanning electron microscope (SEM), and energy-dispersive X-ray (EDX) spectroscopy. Characterization results confirm that polyethyleneimine is uniformly grafted on the graphene oxide nanosheets and, thus, also confirm the successful synthesis of PEI/GO. PEI/GO adsorbent is then evaluated for the removal of lead (Pb²⁺) from aqueous solutions, and the optimum adsorption is attained at pH 6, contact time of 120 min, and PEI/GO dose of 0.1 g. While chemosorption is dominating at low Pb²⁺ concentrations, physisorption is dominating at high concentrations and the adsorption rate is controlled by the boundary-layer diffusion step. In addition, the isotherm study confirms the strong interaction between Pb²⁺ ions and PEI/GO and reveals that the adsorption process obeys well the Freundlich isotherm model (R² = 0.9932) and the maximum adsorption capacity (q_m) is 64.94 mg/g, which is quite high compared to some of the reported adsorbents. Furthermore, the thermodynamic study confirms the spontaneity (negative ΔG° and positive ΔS°) and the endothermic nature (ΔH° = 19.73 kJ/mol) of the adsorption process. The prepared adsorbent (PEI/GO) offers a potential promise for wastewater treatment because of its fast and high uptake removal capacity and could be used as an effective adsorbent for the removal of Pb²⁺-ions and other heavy metals from industrial wastewater.

Sustainable utilization of unavoidable food waste into nutritional media for the isolation of bacterial culture for the removal of heavy metals

This study aims to reuse food waste (FW) as growth media for bacterial cultures for bioremediation of heavy metal. The best natural medium was selected based on the carbon, nitrogen, and other elements. The batch culture of Comamonas terrae showed growth stability for 16 days in the pig bone medium. C. terrae showed the best growth at pH of 7.4, temperature of 35 °C, and medium concentration of 10 g/L. The C. terrae showed heavy metal (HM) removal efficiencies of Cd (52 %) Cr (63 %) Pb (62 %) and Zn (55 %). In addition, the Fourier transform infrared spectroscopy results revealed the bioadsorption of HM in C. terrae. The study suggests the C. terrae can efficiently remove HM and C. terrae may be used for bioremediation of HM. Therefore, pig bone waste is a cost-effective medium and a good solution for the valorization and reuse of FW in line with the circular economy.