Biodegradation of Congo red dye using polyurethane foam-based biocarrier combined with activated carbon and sodium alginate: Batch and continuous study

Unveiling activation mechanism of persulfate by homologous hemp-derived biochar catalysts for enhanced tetracycline wastewater remediation

Advancements in biochar activating persulfate advanced oxidation processes (PS-AOP), have gained significant attention. However, the understanding of biochar-based catalysts in activating PS remains limited. Herein, biochar (BC) and N-doped biochar (NBC) were synthesized from hemp for activating PS to treat tetracycline (TC) wastewater and analyzed their mechanisms separately. Surprisingly, N-doped in biochar leads to a change in the activation mechanism of PS. The BC-PS system operates mainly through a radical pathway, advantageous for treating soil organic pollution (68%) with pH adaptability (less than 10% variation). Nevertheless, the NBC-PS system primarily employs an electron transfer non-radical pathway, demonstrating stability (only 7% performance degradation over four cycles) and enhanced resistance to anionic interference (less than 10% variation) in organic wastewater treatment. This study provides a technical reference and theoretical foundation for enhancing biochar activation of PS in the removal of organic pollutants from aquatic and terrestrial environments.

Modified alginate materials for wastewater treatment: Application prospects

Sodium alginate is a natural macromolecule widely used because of its abundance, low cost of acquisition, and rich hydroxyl and carboxyl groups in the matrix. The physical modification of sodium alginate can be made by blending it with polymer materials. The so-yielded alginate complex is commonly unstable in an aqueous environment due to alginate backbones' high hydrophilicity. The chemical modification can remove its hydrophilic groups and introduce special functional groups or polymers onto the alginate backbones to provide excess reaction sites for specific reactions and effective complexation sites for accommodating antibiotics, dyes, heavy metal ions, and radioactive elements. Sodium alginate has been used in water treatment engineering under revised modification protocols. This article also reviews the latest modification protocols for sodium alginate and outlines the novel application of the modified materials. The limitations of modified sodium alginate materials are described, and research prospects are put forward.

Construction and performance assessment of Recirculating packed bed biofilm reactor (RPBBR) for effective biodegradation of p-cresol from wastewater

Wastewater containing excess phenolic compounds is considered a major environmental concern due to its adverse impacts on the ecosystem. In this work, an effort has been given to treat the p-cresol from wastewater using Recirculating Packed Bed Biofilm Reactor (RPBBR). The process parameters, namely inoculum dose, pH, and NaCl (w/v) concentration were optimized to enhance the specific growth and obtained to be 14 ml, 7.0, and 1% NaCl (w/100 ml), respectively. Maximum p-cresol removal efficiency of 99.36±0.2% was achieved at 100 mg L^-1 of p-cresol. First-order rate constants were found to be 0.70 day^-1 and 0.96 day^-1 for batch and continuous mode, respectively. The intermediates were analysed using FT-IR and GC-MS analysis. Pseudomonas fluorescens was used to assess bacterial toxicity and observed that the toxicity was reduced in case of treated wastewater. Finally, the performance of continuous RPBBR was better than the batch mode.

Encapsulation of activated carbon into calcium alginate microspheres toward granular-activated carbon adsorbents for elemental mercury capture from natural gas

Activated carbon (AC) is an effective adsorbent for removing environmental pollutants. However, the traditional powder form of AC shows difficulty in handling during application which widely limits its utilization on the industrial scale. Herein, to avoid such limitation, traditional AC powder was encapsulated into calcium alginate (CA) microspheres. Calcium alginate/activated carbon (CAA) composite microspheres were prepared via cross-linking of sodium alginate/activated carbon composite solutions in a calcium chloride solution. Furthermore, in order to boost adsorption affinity of CAA composite microspheres toward elemental mercury (Hg°), ammonium iodide (NH₄I)-treated calcium alginate/activated carbon (NCA) composite microspheres were obtained by a simple impregnation method using NH₄I treatment. The morphological, structural, and textural properties of the microspheres were characterized and their Hg° adsorptive capacity was tested at different temperatures. Interestingly, the maximum adsorption capacity of NCA adsorbent composite microspheres was determined as 36,056.5 μg/g at a flow rate of 250 mL/min, temperature of 25 °C, and 500 μg/Nm³ of Hg° initial concentration. The Gibbs free energy (ΔG°) for NCA adsorbent composite microspheres varied from - 8.59 to - 10.54 kJ/mol indicating a spontaneous adsorption process with an exothermic nature. The experimental Hg° breakthrough curve correlated well with Yoon‒Nelson and Thomas models. The breakthrough time (t_b) and equilibrium time (t_e) were found to be 7.5 days and 23 days, respectively. Collectively, the findings of this work indicate a good feasibility of using NCA composite microspheres as potential adsorbents for removing Hg° from natural gas.

Electrospinning micro-nanofibers immobilized aerobic denitrifying bacteria for efficient nitrogen removal in wastewater

Electrospinning micro-nanofibers with exceptional physicochemical properties and biocompatibility are becoming popular in the medical field. These features indicate its potential application as microbial immobilized carriers in wastewater treatment. Here, aerobic denitrifying bacteria were immobilized on micro-nanofibers, which were prepared using different concentrations of polyacrylonitrile (PAN) solution (8%, 12% and 15%). The results of diameter distribution, specific surface area and average pore diameter indicated that 15% PAN micro-nanofibers with tighter surface structure were not suitable as microbial carriers. The bacterial load results showed that the cell density (OD₆₀₀) and total protein of 12% PAN micro-nanofibers were 107.14% and 106.28% higher than those of 8% PAN micro-nanofibers. Subsequently, the 12% PAN micro-nanofibers were selected for aerobic denitrification under the different C/N ratios (1.5-10), and stable performance was obtained. Bacterial community analysis further manifested that the micro-nanofibers effectively immobilized bacteria and enriched bacterial structure under the high C/N ratios. Therefore, the feasibility of micro-nanofibers as microbial carriers was confirmed. This work was of great significance for promoting the application of electrospinning for microbial immobilization in wastewater treatment.

Modification of biochar by phosphoric acid via wet pyrolysis and using it for adsorption of methylene blue

Algae biochar (ABC), coconut shell biochar (CSBC), and coconut coat biochar (CCBC) were prepared by wet pyrolysis in a phosphoric acid solvent under normal pressure. Materials were characterized for their micromorphology, specific surface area, and surface functional groups by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) nitrogen adsorption-desorption spectrum technique and Fourier transform infrared diffraction (FT-IR). The evaluation of the liquid-phase adsorption performance using methylene blue (MB) as a pigment model, and the effects of temperature, pH, adsorbent dosage, and pollutant concentration of the MB adsorption onto modified biochars were fully investigated. The adsorption mechanism was proposed based on the adsorption kinetics curve and adsorption isotherm. The synthetic biochar showed great adsorption properties toward cationic dyes rather than anionic dyes. Specifically, the adsorption abilities for algal biochar, coconut shell biochar, and coconut coat biochar were determined to be 97.5%, 95.4% and 21.2%, respectively. The isothermal adsorption of MB by the three kinds of biochar conformed to the Langmuir equation, and the adsorption process fitted to the quasi-second-order kinetic equation, which suggested that ABC and CSBC effectively adsorbed MB dye molecules through hydrogen bonding, π-π stacking, and electrostatic interactions.

Understanding the biodegradation pathways of azo dyes by immobilized white-rot fungus, Trametes hirsuta D7, using UPLC-PDA-FTICR MS supported by in silico simulations and toxicity assessment

No biodegradation methods are absolute in the treatment of all textile dyes, which leads to structure-dependent degradation. In this study, biodegradation of three azo dyes, reactive black 5 (RB5), acid blue 113 (AB113), and acid orange 7 (AO7), was investigated using an immobilized fungus, Trametes hirsuta D7. The degraded metabolites were identified using UPLC-PDA-FTICR MS and the biodegradation pathway followed was proposed. RB5 (92%) and AB113 (97%) were effectively degraded, whereas only 30% of AO7 was degraded. Molecular docking simulations were performed to determine the reason behind the poor degradation of AO7. Weak binding affinity, deficiency in H-bonding interactions, and the absence of interactions between the azo (-NN-) group and active residues of the model laccase enzyme were responsible for the low degradation efficiency of AO7. Furthermore, cytotoxicity and genotoxicity assays confirmed that the fungus-treated dye produced non-toxic metabolites. The observations of this study will be useful for understanding and further improving enzymatic dye biodegradation.

Green synthesis of ZnFe2O4@ZnO nanocomposites using Chrysanthemum spp. floral waste for photocatalytic dye degradation

The occurrence of textile dyeing wastewater discharged into the environment has been recently increasing, resulting in harmful effects on living organisms and human health. The use of green nanoparticles for water decontamination has received much attention. Floral waste can be extracted with the release of natural compounds, which act as reducing and stabilizing agents during the biosynthesis of nanoparticles. Herein, we report the utilization of Chrysanthemum spp. floral waste extract to synthesize green ZnFe₂O₄@ZnO (ZFOZx) nanocomposites for the photocatalytic degradation of Congo red under solar light irradiation. The various molar ratio of ZnFe₂O₄ (0-50%) was incorporated into ZnO nanoparticles. The surface area of green ZFOZx nanocomposites was found to increase (7.41-42.66 m² g^-1) while their band gap energy decreased from 1.98 eV to 1.92 eV. Moreover, the results exhibited the highest Congo red dye degradation efficiency of 94.85% at a concentration of 5.0 mg L^-1, and a catalyst dosage of 0.33 g L^-1. The ^•O₂^- reactive species played a vital role in the photocatalytic degradation of Congo red dye. Green ZFOZ3 nanocomposites had good recyclability with at least three cycles, and an excellent stability. The germination results showed that wastewater treated by ZFOZ3 was safe enough for bean seed germination. We expect that this work contributes significantly to developing novel green bio-based nanomaterials for environmental remediation as well as reducing the harm caused by flower wastes.

Synthesis of mesoporous-structured MIL-68(Al)/MCM-41-NH2 for methyl orange adsorption: Optimization and Selectivity

Here, we report a novel amino-modified mesoporous-structured aluminum-based metal-organic framework adsorbent, MIL-68(Al)/MCM-41-NH₂, for dye sewage treatment. The introduction of molecular sieves overcomes the inherent defects of microporous MOFs in contaminant transfer and provides more active sites to enhance adsorption efficiency. Compared with using organic amino ligands directly, this strategy is ten times cheaper. The composite was well characterized and analyzed in terms of morphology, structure and chemical composition. Batch experiments were carried out to study the influences of essential factors on the process, such as pH and temperature. In addition, their interactions and the optimum conditions were examined using response surface methodology (RSM). The adsorption kinetics, isotherms and thermodynamics were systematically elucidated. In detail, the adsorption process conforms to pseudo-second-order kinetics and follows the Sips and Freundlich isothermal models. Moreover, the maximum adsorption capacity Q_s of methyl orange (MO) was 477 mg g^-1. It could be concluded that the process was spontaneous, exothermic, and entropy-reducing. Several binary dye systems have been designed for selective adsorption research. Our material has an affinity for anionic pigments. The adsorption mechanisms were discussed in depth. The electrostatic interaction might be the dominant effect. Meanwhile, hydrogen bonding, π-π stacking, and pore filling might be important driving forces. The excellent thermal stability and recyclability of the adsorbent are readily noticed. After five reuse cycles, the composite still possesses a removal efficiency of 90% for MO. Overall, the efficient and low-cost composite can be regarded as a promising adsorbent for the selective adsorption of anionic dyes from wastewater.