Ultrasound-sodium percarbonate effectively promotes short-chain carboxylic acids production from sewage sludge through anaerobic fermentation

Study on short-chain fatty acids production from anaerobic fermentation of waste activated sludge pretreated by alkali-activated ammonium persulfate

As a sustainable method for carbon recovery from waste activated sludge (WAS), anaerobic fermentation to produce short-chain fatty acids (SCFAs) is often limited by disintegration of WAS. A novel pretreatment method of alkaline-activated ammonium persulfate (AP/Alk), employing an initial pH of 10 and an ammonium persulfate dosage of 1 mM/g VSS (mmol per gram volatile suspended solids), was proposed in this study to enhance disintegration of WAS and yield of SCFAs. It was compared with one control and five pretreatment groups including alkali, persulfate, free ammonia, ammonium persulfate, alkali-activated sodium persulfate to elucidate the synergistic effects of free ammonia and radicals in WAS dissolution and acidogenesis within the AP/Alk system. The highest sludge disintegration degree with 30.3 % and maximum SCFAs production with 295.4 mg COD/g VSS were achieved by using the method. Comparative analysis showed that free ammonia primarily disrupted microbial cells to release intracellular organics, while radicals preferentially degraded tightly bound extracellular polymeric substances (TB-EPS) proteins. The synergistic effects of free ammonia and radicals accelerated accumulation of soluble proteins and polysaccharides, improved selectively enrichment of hydrolytic-acidogenic genera (e.g., Macellibacteroides, Proteiniclasticum, Desulfobulbus), and upregulated antioxidant genes to alleviate oxidative stress, but suppressed SCFAs consumers (e.g., unclassified_f__Comamonadaceae) including methanogens (e.g., Methanosaeta), thereby promoting the accumulation of SCFAs and acetic acid proportion. AP/Alk offers a sustainable strategy for WAS utilization and energy recovery.

Specialized genera and niche partitioning promote the biosynthesis of short-chain fatty acids in anaerobic cofermentation of sewage sludge and protein-rich waste

Elucidating the relationships among various microorganisms and their reactions to environmental fluctuations, such as dissolved organic matter (DOM), remains a key objective in the anaerobic cofermentation (ACF) of sewage sludge (SS) and protein-rich waste (PRW); however, this topic is inadequately understood. In this study, the microbial traits associated with the biosynthesis of short-chain fatty acids (SCFAs) were investigated in the ACF of SS in conjunction with four distinct PRWs (pupa, fishmeal, maize gluten, and soybean meal). Compared with those in the SS-only reactor, the first-order rate constants for biosolid dissolution in the SS/PRW reactors were increased by 1.9-4.0-fold. Pupa performed best among the four PRWs in the ACF process, with the solubilization rate increasing from 9.4% (SS-only reactor) to 33.5%. The copious and readily biodegradable DOM created a unique niche for functional microbes, leading to reframing of the microfloral structure. Specialized genera, such as Holophaga, Alistipes, and Geothrix, were responsible for SCFA biosynthesis in the SS/pupa reactor. The highly differentiated, low-redundancy microecosystem constructed in the SS/pupa reactor contributed to the independent functioning of the hydrolyzers and acidogens, resulting in an SCFA yield that was 6.9-fold greater than that in the SS-only reactor. In addition, the ACF of SS/pupa resulted in the genes encoding the NiFe hydrogenase and Wood-Ljungdahl pathway being intact, which promoted the synthesis of SCFAs, especially acetate. These findings offer new insights into the microbiological mechanisms that augment SCFA generation by the ACF of SS/PRW in terms of microorganism fate, metabolic network relationships, and microecosystem niche.

Application of machine learning in ultrasonic pretreatment of sewage sludge: Prediction and optimization

In this research, typical industrial scenarios were analyzed optimized by machine learning algorithms, which fills the gap of massive data and industrial requirements in ultrasonic sludge treatment. Principal component analysis showed that the ultrasonic density and ultrasonic time were positively correlated with soluble chemical oxygen demand (SCOD), total nitrogen (TN), and total phosphorus (TP). Within five machine learning models, the best model for SCOD prediction was XG-boost (R2 = 0.855), while RF was the best for TN and TP (R2 = 0.974 and 0.957, respectively). In addition, SHAP indicated that the importance feature for SCOD, TN, and TP was ultrasonic time, and sludge concentration, respectively. Finally, the typical industrial scenario of ultrasonic pretreatment of sludge was analyzed. In the secondary sludge, treatment volume at 0.6 L, the pH at 7.0, and the ultrasonic time at 20 min was best to improve the SCOD. In the ultrasonic pretreatment primary sludge, treatment volume of 0.3 L, pH of 7.0, and ultrasonic time of 15 min was best to improve the SCOD. Furthermore, the ultrasonic power at 700 W and ultrasonic time at 20 min were best to improve the C/N and C/P in the secondary sludge. In the primary sludge, the ultrasonic power at 600 W, and the ultrasonic time at 15 min were best to improve C/N and C/P. This study lays a foundation for the practical application of ultrasonic pretreatment of sludge and provides basic information for typical industrial scenarios.

Combination of magnetite and sodium percarbonate to enhance acetate-enriched short-chain fatty acids production during sludge anaerobic fermentation

Large amounts of waste activated sludge are generated daily worldwide, posing significant environmental challenges. Anaerobic fermentation is a promising method for sludge disposal, but it has two technical bottlenecks: the availability of short-chain fatty acids (SCFAs)-producing substrates and SCFAs consumption by methanogenesis. This study proposes a pretreatment strategy combining sodium percarbonate (SPC) and magnetite (Fe3O4) to address these issues. Under optimized conditions (20 mg Fe3O4/g TSS and 15 mg SPC/g TSS), SCFAs production increased to 3244.10 ± 216.31 mg COD/L, about 3.06 times the control (1057.29 ± 35.06 mg COD/L) and surpassing reported treatments. The combined pretreatment enhanced the disruption of extracellular polymeric substances, increased the release of biodegradable matters, improved acidogenesis enzyme activities, and inhibited methanogenesis. Additionally, it increased NH4+-N release in favor of the recovery of phosphorus from sludge residual. This study demonstrates an efficient pretreatment for high SCFAs production and resource recovery from WAS.

Peracetic acid (PAA)-based pretreatment effectively improves medium-chain fatty acids (MCFAs) production from sewage sludge

Peracetic acid (PAA), known for its environmentally friendly properties as a oxidant and bactericide, is gaining prominence in decontamination and disinfection applications. The primary product of PAA oxidation is acetate that can serve as an electron acceptor (EA) for the biosynthesis of medium-chain fatty acids (MCFAs) via chain elongation (CE) reactions. Hence, PAA-based pretreatment is supposed to be beneficial for MCFAs production from anaerobic sludge fermentation, as it could enhance organic matter availability, suppress competing microorganisms and furnish EA by providing acetate. However, such a hypothesis has rarely been proved. Here we reveal that PAA-based pretreatment leads to significant exfoliation of extracellular polymeric substances (EPS) from sludge flocs and disruption of proteinic secondary structures, through inducing highly active free radicals and singlet oxygen. The production of MCFAs increases substantially to 11,265.6 mg COD L-1, while the undesired byproducts, specifically long-chain alcohols (LCAs), decrease to 723.5 mg COD L-1. Microbial activity tests further demonstrate that PAA pretreatment stimulates the CE process, attributed to the up-regulation of functional genes involved in fatty acid biosynthesis pathway. These comprehensive findings provide insights into the effectiveness and mechanisms behind enhanced MCFAs production through PAA-based technology, advancing our understanding of sustainable resource recovery from sewage sludge.

Benzethonium chloride affects short chain fatty acids produced from anaerobic fermentation of waste activated sludge: Performance, biodegradation and mechanisms

Benzethonium chloride (BZC) is viewed as a promising disinfectant and widely applied in daily life. While studies related to its effect on waste activated sludge (WAS) anaerobic fermentation (AF) were seldom mentioned before. To understand how BZC affects AF of WAS, production of short chain fatty acids (SCFAs), characteristics of WAS as well as microbial community were evaluated during AF. Results manifested a dose-specific relationship of dosages between BZC and SCFAs and the optimum yield arrived at 2441.01 mg COD/L with the addition of 0.030 g/g TSS BZC. Spectral results and protein secondary structure variation indicated that BZC denatured proteins in the solid phase into smaller proteins or amino acids with unstable structures. It was also found that BZC could stimulate the extracellular polymeric substances secretion and reduce the surface tension of WAS, leading to the enhancement of solubilization. Beside, BZC promoted the hydrolysis stage (increased by 7.09 % to 0.030 g/g TSS BZC), but inhibited acetogenesis and methanogenesis stages (decreased by 6.85 % and 14.75 % to 0.030 g/g TSS BZC). The microbial community was also regulated by BZC to facilitate the enrichment of hydrolytic and acidizing microorganisms (i.e. Firmicutes). All these variations caused by BZC were conducive to the accumulation of SCFAs. The findings contributed to investigating the effect of BZC on AF of WAS and provided a new idea for the future study of AF mechanism.

Permanganate (PM) pretreatment improves medium-chain fatty acids production from sewage sludge: The role of PM oxidation and in-situ formed manganese dioxide

Medium-chain fatty acids (MCFAs) production from sewage sludge is mainly restricted by the complex substrate structure, competitive metabolism and low electron transfer rate. This study proposes a novel permanganate (PM)-based strategy to promote sludge degradation and MCFAs production. Results show that PM pretreatment significantly increases MCFAs production, i.e., attaining 12,036 mg COD/L, and decreases the carbon fluxes of electron acceptor (EA)/electron donor (ED) to byproducts. Further analysis reveals that PM oxidation enhances the release and biochemical conversion of organic components via disrupting extracellular polymers (EPS) structure and reducing viable cells ratio, providing directly available EA for chain elongation (CE). The microbial activity positively correlated with MCFAs generation are apparently heightened, while the competitive metabolism of CE (i.e., methanogensis) can be completely inhibited. Accordingly, the functional bacteria related to critical bio-steps and dissimilatory manganese reduction are largely enriched. Further mechanism exploration indicates that the main contributors for sludge solubilization are 1O2 (61.6 %) and reactive manganese species (RMnS), i.e., Mn(V)/Mn(VI) (22.3 %) and Mn(III) (∼16.1 %). As the main reducing product of PM reaction, manganese dioxide (MnO2) can enable the formation of microbial aggregates, and serve as electron shuttles to facilitate the carbon fluxes to MCFAs during CE process. Overall, this strategy can achieve simultaneous hydrogen recovery, weaken competitive metabolisms and provide electron transfer accelerator for CE reactions.

Percarbonate-strengthened ferrate pretreatment for enhancing short-chain fatty acids production from sewage sludge

Sewage sludge management poses a pressing environmental challenge, demanding the implementation of sustainable solutions to facilitate resource recovery. Short-chain fatty acids (SCFAs) serve as valuable chemicals and renewable energy sources, underscoring the importance of maximizing their production to achieve sustainable waste management. Therefore, this study proposes a novel and green strategy, i.e., percarbonate-strengthened ferrate pretreatment to enhance SCFAs synthesis from sewage sludge, because percarbonate could activate ferrate oxidation through providing (bi) carbonate and hydrogen peroxide. Results show that percarbonate largely reduces the required ferrate dosage for fermentation improvement, and their combination exhibits obvious synergistic effects on SCFAs accumulation and sludge reduction. Under the optimal pretreatment conditions, SCFAs production is promoted to 3670.2 mg COD/L, representing a remarkable increase of 5512.4 %, 156.0 % or 395.1 % compared to the control, percarbonate alone or ferrate alone, respectively. Mechanism explorations demonstrate that percarbonate-strengthened ferrate pretreatment significantly enhances sludge solubilization, elevates substrate biodegradability, and alters the physiochemical properties of sludge to favor organics fermentation. The synergistic effects on solid organics release and sludge properties can be attributed to the combined mechanisms of enhanced oxidation and alkaline hydrolysis. Further investigations on metabolic pathways reveal that the combination substantially improves key enzyme activities associated with hydrolysis and SCFAs formation, while severely inhibits that of SCFAs consumption. These findings are further supported by the functional genes coding relevant enzymes. Moreover, the combination alters microbial structures and compositions, leading to the screening and enrichment of key microbes that facilitate SCFAs accumulation. This innovative strategy holds significant promise in advancing sewage sludge management towards a more circular and resource-efficient paradigm.

Enhancing acidogenic fermentation of waste activated sludge via urea hydrogen peroxide pretreatment: Performance and mechanisms

Improving the anaerobic treatment performance of waste activated sludge (WAS) to achieve resource recovery is an indispensable requirement to reduce carbon emissions, minimize and stabilize biosolids. In this study, a novel strategy by using urea hydrogen peroxide (UHP) to enhance SCFAs production through accelerating WAS disintegration, degrading recalcitrant substances and alleviating competitive suppression of methanogens. The SCFAs production and acetate proportion rose from 436.9 mg COD/L and 31.3% to 3102.6 mg COD/L and 54.1%, respectively, when UHP grew from 0 to 80 mg/g TSS. Mechanism investigation revealed that OH, O2 and urea were the major contributors to accelerate WAS disintegration with the sequence of OH> O2 > urea. Function microbes related to acidification and genes associated with acetate production ([EC:2.3.1.8] and [EC:2.7.2.1]) were upregulated while genes encoding propionic acid production ([EC:6.4.1.3] and [EC:6.2.1.1]) were downregulated. These results raised the application prospects of UHP in WAS resource utilization.

Ultrasound-based advanced oxidation processes for landfill leachate treatment: Energy consumption, influences, mechanisms and perspectives

Advanced oxidation processes (AOPs) based on ultrasound (US) have attracted considerable attention in recent years due to its advantages in the degradation of landfill leachate. The review summarizes the existing treatment methods of leachate from lab-scale, compares their advantages and disadvantages by focusing on the degradation of emerging contaminants (ECs) in the leachate. Then the US-based AOPs are introduced emphatically, including their degradation mechanisms, influencing factors, energy consumption, further optimization methods as well as the possibility of field-scale application are systematically described. Moreover, this review also expounds on the advantages of dual-frequency US (DFUS) technology compared with single-frequency US, and a theoretically feasible DFUS process is proposed to treat ECs in the leachate. Finally, suggestions and prospects for US technologies in treating landfill leachate are put forward to aid future research on landfill leachate treatment. Meaningfully, this manuscript will provide reference values of US-based technologies in landfill leachate treatment for the practical use, facilitating the development of US-based AOPs in landfill leachate management and disposal.

Efficient removal of chloroform from groundwater using activated percarbonate by cellulose nanofiber-supported Fe/Cu nanocomposites

Chloroform (CF) is a recalcitrant halogenated methane (HM) that has received widespread attention due to its frequent detection in groundwater and its potential carcinogenic risk. In this study, TEMPO-oxidized cellulose nanofiber-supported iron/copper bimetallic nanoparticles (TOCNF-Fe/Cu), a novel composite catalyst, was synthesized to activate sodium percarbonate (SPC) for the removal of CF from groundwater. The results showed that over 96.3% of CF could be removed in a neutral reaction medium (pH 6.5-9) within 180 min using 0.66 g L-1 of TOCNF (0.32)-Fe/Cu (1) and 1 mM of SPC, which outperforms typical advanced oxidation processes. The reaction mechanism of the TOCNF-Fe/Cu-SPC system for the CF removal was elucidated. As demonstrated through electron paramagnetic resonance and quenching experiments, the TOCNF-Fe/Cu-SPC system was found to include •OH and O2•-, where the latter played a dominant role in the CF removal. DFT calculations indicated that TOCNF improved the electron transport capability of Fe/Cu and reduced the transition state energy. The Fe species on the surface of TOCNF-Fe/Cu were identified as the primary active sites for SPC activation, whereas the Cu species were beneficial to the regeneration of the Fe species. Additionally, TOCNF-Fe/Cu was found to have good recyclability and stability. The feasibility of the TOCNF-Fe/Cu-SPC system was further confirmed by applying it for the efficient removal of composite HMs from actually contaminated groundwater. Overall, the TOCNF-Fe/Cu-SPC system is an attractive candidate for the treatment of HM-contaminated groundwater.

Enhanced volatile fatty acid production from waste activated sludge by urea hydrogen peroxide: performance and mechanisms

Anaerobic acidogenesis of waste activated sludge (WAS) presents significant potential for resource recovery and waste treatment. However, the slow hydrolysis of WAS limits the efficiency of this approach. In this study, we applied urea hydrogen peroxide (UHP) pretreatment to enhance WAS hydrolysis and investigated the effects of operating parameters on volatile fatty acid (VFA) production and the associated mechanisms. Results demonstrated that UHP significantly improved WAS hydrolysis and VFA production, with a three-fold increase in soluble chemical oxygen demand (SCOD) compared to the control group. UHP dosage emerged as the most critical factor for VFA production, with the maximum VFA concentration increasing from 1127.6 to 8800.9 mg COD per L as UHP dosage ranged from 0 to 6 mmol g-1 VSS (Volatile suspended solids). At an optimal UHP dosage of 4 mmol g-1 VSS, both the unit oxidant promotion efficiency (ΔVFAs/ΔUHP) and the maximum VFA concentration reached relatively high levels, at 35.3 mg COD per mmol and 7527.3 mg COD per L, respectively. UHP pretreatment generated alkaline conditions, H2O2, ·OH and free ammonia, which collectively disrupted the extracellular polymeric substances (EPS) structure, transforming unextractable EPS into extractable forms and promoting the release of organic matter during both the pretreatment and fermentation stages. Excitation-emission matrix (EEM) analysis revealed that UHP increased the concentration of easily utilizable organic matter, providing more substrates for acidogenic bacteria and enhancing VFA production. Furthermore, weak alkaline conditions and high free ammonia concentrations in the UHP group facilitated VFA accumulation by preventing rapid acidification and suppressing methanogen activity. This study offers valuable insights into the potential of UHP pretreatment for enhancing WAS hydrolysis and VFA production, with promising applications in wastewater treatment and resource recovery.

Ferrate pretreatment-anaerobic fermentation enhances medium-chain fatty acids production from waste activated sludge: Performance and mechanisms

The rupture of cytoderm and extracellular polymeric substances (EPS), and competitive inhibition of methanogens are the main bottlenecks for medium-chain fatty acids (MCFAs) production from waste activated sludge (WAS). This study proposes a promising ferrate (Fe (VI))-based technique to enhance MCFAs production from WAS through accelerating WAS disintegration and substrates transformation, and eliminating competitive inhibition of methanogens, simultaneously. Results shows that the maximal MCFAs production attains 8106.3 mg COD/L under 85 mg Fe/g TSS, being 58.6 times that of without Fe (VI) pretreatment. Mechanism exploration reveals that Fe (VI) effectively destroys EPS and cytoderm through electron transfer, reactive oxygen species generation (i.e., OH, O₂^- and ¹O₂) and elevated alkalinity, resulting in the transfer of organics from solid to soluble phase and from macromolecules to intermediates. Generation and transformation of intermediates analyses illustrate that Fe (VI) facilitates hydrolysis, acidification and chain elongation (CE) but suppresses methanogenesis, promoting the targeted conversion of intermediates to MCFAs. Also, Fe (VI) pretreatment provides potential electron shuttles for chain elongation. Microbial community and functional genes encoding key enzymes analysis indicates that Fe (VI) screens key microorganisms and up-regulates functional genes expression involved in CE pathways. Overall, this technology avoids methanogens inhibitor addition and stimulates vivianite synthesis during MCFAs production from WAS.