Performance and mechanism of azo dyes degradation and greenhouse gases reduction in single-chamber electroactive constructed wetland system

Evolution of interspecific interactions underlying the nonlinear relationship between active biomass and pollutant degradation capacity in bioelectrochemical systems

This study proposes a switching operating mode that alternates between microbial fuel cell (MFC) and microbial electrolysis cell (MEC) to restore the biofilm activity and organic pollutant degradation capacity in bioelectrochemical systems (BESs) during prolonged operation. After the model switching, the toluene degradation kinetics in BESs equipped with graphite sheet (GS) and polyaniline@carbon nanotubes (PANI@CNTs) bioanodes were elevated by 2.10 and 3.14 times, respectively. Nevertheless, the amount of active biomass in the GS and PANI@CNTs bioanodes only increased by 1.04 and 1.05 times, with the PANI@CNTs bioanode consistently outperforming in hierarchical biofilm activity and redox properties. Additionally, the distribution of functional genes across the dominant genera revealed their roles in extracellular electron transfer and the four steps of toluene degradation (primary oxidation, ring-opening, intermediate oxidation, and tricarboxylic acid cycle). Furthermore, the cooperation of substrate exchange among Pseudomonas, Alicycliphilus, and Acidovorax in the MFC mode evolved to interactions among Acidovorax, Alicycliphilus, and Geobacter in the MEC mode, which attributed to the nonlinear relationship between active biomass and pollutant degradation capacity. These results provide insights into the operating mode and interspecific interactions of BESs, with implications for practical applications.

The photocatalytic wastewater hydrogen production process with superior performance to the overall water splitting

The utilization of a cost-free sacrificial agent is a novel approach to significantly enhance the efficiency of photocatalytic hydrogen (H2) production by water splitting. Wastewater contains various organic pollutants, which have the potential to be used as hole sacrificial agents to promote H2 production. Our studies on different pollutants reveals that not all pollutants can effectively promote H2 production. However, when using the same pollutants, not all photocatalysts achieved a higher H2 evolution rate than pure water. Only when the primary oxidizing active species of the photocatalyst are •OH radicals, which are generated by photogenerated holes, and when the pollutants are easily attacked and degraded by •OH radicals, can the production of H2 be effectively promoted. It is noteworthy that the porous brookite TiO2 photocatalyst exhibits a significantly higher H2 evolution rate in Reactive Red X-3B and Congo Red, reaching as high as 26.46 mmol⋅g-1⋅h-1 and 32.85 mmol⋅g-1 ⋅h-1, respectively, which is 2-3 times greater than that observed in pure water and is 10 times greater than most reported studies. The great significance of this work lies in the potential for efficient H2 production through the utilization of wastewater.

Fulvic acid impact on constructed wetland-microbial electrolysis cell system performance: Metagenomic insights

This study explores the roles of fulvic acid (FA) in both a conventionally constructed wetland (CCW) and a newly constructed wetland-microbial electrolysis cell (ECW). The results showed that FA increased the average removal efficiency of chemical oxygen demand, total phosphorus, total nitrogen, and ammonia nitrogen in ECW by 8.6, 46.2, 33.0, and 27.9 %, respectively, compared to CCW, and reduced the global warming potential by > 60 %. FA promoted the proliferation of electroactive bacteria (e.g., Chlorobaculum and Candidatus Tenderia) and FA-degrading bacteria (e.g., Anaerolineaceae and Gammaproteobacteria) and reduced methanogens (e.g., Methanothrix) via type-changing. The study's findings suggest that FA influences pollutant removal and microbiome dynamics by altering dissolved oxygen levels and redox potential. In summary, FA and ECW enhanced the efficiency of constructed wetlands by facilitating electron transfer and consumption, and supporting microbial growth and metabolism.

Reduction of methane and nitrous oxide emissions from stormwater bioretention cells through microbial electrolytic cells

This study investigated the reduction of methane (CH4) and nitrous oxide (N2O) emissions from stormwater bioretention cells through microbial electrolytic cell (MEC), showing the largest reduction of 32.21 % (CH4) at 9.2 μA/m2 of current density and 56.16 % (N2O) at 3.5 μA/m2 of current density, compared with the corresponding in the control (0 μA/m2 of current density). Kinetic of CH4 and N2O emissions could be well fitted by Logistic model with high correlation coefficient (R2 > 0.9500) and model efficiency (ME > 0.95) but low relative root mean square error (RRMSE < 7.88). The increase of pmoA and polysaccharide (PS) were responsible for CH4 reduction, while N2O reduction was attributed to the decrease of nirS and the increase for nosZ and protein (PN), which could explain the lowest GWPd (10.67 mgCO2-eq/m2/h) at 3.5 μA/m2 of current density, suggesting that MEC could be promising for the reduction of CH4 and N2O emissions from bioretention cells.

3D printing for constructing biocarriers using sodium alginate/ε-poly-l-lysine ink: Enhancing microbial enrichment for efficient nitrogen removal in wastewater

The microbial enrichment of traditional biocarriers is limited due to the inadequate consideration of spatial structure and surface charging characteristics. Here, capitalizing on the ability of 3D printing technology to fabricate high-resolution materials, we further designed a positively charged sodium alginate/ε-poly-l-lysine (SA/ε-PL) printing ink, and the 3D printed biocarriers with ideal pore structure and rich positive charge were constructed to enhance the microbial enrichment. The rheological and mechanical tests confirmed that the developed SA/ε-PL ink could simultaneously satisfy the smooth extrusion for printing process and the maintenance of 3D structure. The utilization of the ε-PL secondary cross-linking strategy reinforced the 3D mechanical structure and imparted the requisite physical properties for its application as a biocarrier. Compared with traditional sponge carriers, 3D printed biocarrier had a faster initial attachment rate and a higher biomass of 14.58 ± 1.18 VS/cm3, and the nitrogen removal efficiency increased by 53.9 %. Besides, due to the superior electrochemical properties and biocompatibility, the 3D printed biocarriers effectively enriched the electroactive denitrifying bacteria genus Trichococcus, thus supporting its excellent denitrification performance. This study provided novel insights into the development of new functional biocarriers in the wastewater treatment, thereby providing scientific guidance for practical engineering.

Mechanistic investigation of azo dye removal from carbon-deficient dyeing wastewater using horizontal-vertical constructed wetlands

Azo dye degradation can be achieved by simulating a series of anaerobic and aerobic conditions within the constructed wetland (CW) system. The current investigation evaluated the effectiveness of a baffled horizontal-vertical CW system, planted with Typha angustifolia, simulating anaerobic-aerobic conditions to treat carbon-deficient synthetic dyeing wastewater containing 100 mg/L Reactive Yellow 145 (RY145) azo dye. In the absence of an available carbon source in dyeing wastewater, an optimum quantity of sodium acetate was supplemented as the substrate for microbial degradation of RY145. Influent dyeing wastewater characteristics were 5555 ADMI colour, 461 mg/L chemical oxygen demand (COD) and 39 mg/L total nitrogen (TN). During the operation period, the CW system achieved 97% colour, 87% COD, 95% ammonium nitrogen (NH4+-N) and 71% TN removals at 4 d hydraulic retention time (HRT). Favourable environmental conditions, such as low redox conditions and substrate availability in horizontal CW, contributed to a significant reduction in colour (96%). Most TN reduction (67%) happened in horizontal CW by denitrification and plant assimilation. The metagenomic study revealed that Proteobacteria, Bacteroidetes, Chloroflexi and Firmicutes were responsible for pollutant degradation within horizontal CW. The UV-visible spectra and high-resolution liquid chromatograph mass spectrometer (HR-LCMS) analysis confirmed that dye degradation intermediates generated from the breakage of azo bonds were eliminated in vertical CW with high redox conditions. The results of the phytotoxicity and fish toxicity experiments demonstrated a substantial toxicity reduction in the CW system-treated effluent.

CH4 control and nitrogen removal from constructed wetlands by plant combination

Global warming trend is accelerating. This study proposes a green and economical methane (CH4) control strategy by plant combination in constructed wetlands (CWs). In this study, a single planting of Acorus calamus L. hybrid constructed wetland (HCW-A) and a mixed planting of Acorus calamus L. and Eichhornia crassipes (Mart.) Solms hybrid constructed wetland (HCW-EA) were constructed. The differences in nitrogen removal performance and CH4 emissions between HCW-A and HCW-EA were compared and analyzed. The findings indicated that HCW-EA demonstrated significant improvements over HCW-A, with NH4+-N and TN removal rates increasing by 21.61% and 16.38% respectively, and CH4 emissions decreased by 43.36%. The microbiological analysis results showed that plant combination promoted the enrichment of Proteobacteria, Alphaproteobacteria and Bacillus. More nitrifying bacteria carrying nxrA genes and denitrifying bacteria carrying nirK genes accelerated the nitrogen transformation process. In addition, the absolute abundance ratio of pmoA/mcrA increased, reducing the release of CH4.

Critical evaluation of electroactive wetlands: traditional and modern advances

In the field of sustainable wastewater management, electroactive wetlands (EW), or constructed wetland-microbial fuel cells (CW-MFC), are an emerging technology. With the growing problem of untreated wastewater, the emphasis must shift to decentralisation of wastewater treatment infrastructure, and CW-MFC can be an excellent choice. This review provides a chronologically organized account of the design and configuration of CW-MFCs developed between 2010 and 2023. The research on CW-MFC has mainly focused on material, positioning and number of electrodes; use of electroconductive media and filler materials; flow regime; algal-based CW-MFC and multistage setups. Compared to traditional constructed wetlands (CW) and microbial fuel cells (MFC), CW-MFCs have a number of advantages, including better treatment efficiency, faster organic matter utilisation, lower capital and land requirements and a smaller carbon footprint. However, there are some limitations as well, such as upscaling and viable electricity generation, which are covered in more detail in the article. Moreover, the economics of this technology is also evaluated. The microbiology of a CW-MFC and its influence on its performance are also elaborated. Recent advancements in this field in terms of design, configuration and performance are discussed. Finally, the knowledge gaps that must be addressed before this technique can be successfully implemented on a large scale are highlighted, along with specific recommendations. This article aims to advocate for EWs as an ideal decentralised wastewater treatment technique, while also shedding light on the areas that still need to be worked on.

Seasonal purification efficiency, greenhouse gas emissions and microbial community characteristics of a field-scale surface-flow constructed wetland treating agricultural runoff

Controlling nonpoint source pollution (NPSP) is very important for protecting the water environment, and surface-flow constructed wetlands (SFCWs) have been widely established to mitigate NPSP loads. In this study, the pollutant removal efficiencies, greenhouse gas (GHG) emissions, and chemical and microbial community properties of the sediment in a large-scale SFCW established beside a plateau lake (Qilu Lake) in southwestern China to treat agricultural runoff were evaluated over a year. The SFCW performed best in terms of nitrogen removal in autumn (average efficiency of 63.5% at influent concentrations of 9.3-35.4 mg L-1) and demonstrated comparable efficiency in other seasons (23.7-40.0%). The removal rates of total phosphorus (TP) and chemical oxygen demand (COD) were limited (18.6% and 12.4% at influent concentrations of 1.1 and 45.5 mg L-1 on average, respectively). The SFCW was a hotspot of CH4 emissions, with an average flux of 31.6 mg m-2·h-1; moreover, CH4 emissions contributed the most to the global warming potential (GWP) of the SFCW. Higher CH4 and N2O fluxes were detected in winter and in the front-end section of the SFCW with high pollutant concentrations, and plant presence increased CH4 emissions. Significant positive relationships between nutrient and heavy metal contents in the SFCW sediment were detected. The microbial community compositions were similar in autumn and winter, with Thiobacillus, Lysobacter, Acinetobacter and Pseudomonas dominating, and this distribution pattern was clearly distinct from those in spring and summer, with high proportions of Spirochaeta_2 and Denitratisoma. The microbial co-occurrence network in spring was more complex with stronger positive correlations than those in winter and autumn, while it was more stable in autumn with more keystone taxa. Optimization of the construction, operation and management of SFCWs treating NPSP in lake watersheds is necessary to promote their environmental benefits.

Microalgae-based constructed wetland system enhances nitrogen removal and reduce carbon emissions: Performance and mechanisms

Combination of constructed wetlands (CWs) and microalgae-based technologies has been proved as effective wastewater treatment option; however, little attention was paid to investigate the optimal combination ways. This study showed that the integrated system (IS) connecting microalgal pond with CWs exhibited improved pollutant-removal efficiencies and preferred carbon reduction effects compared to other alternatives such as coupled system or independent CWs. Microbial analysis demonstrated that core microorganisms (e.g., Acinetobacter and Thermomonas) of the IS were mostly associated with carbon, nitrogen, and energy metabolism. Based on co-occurrence networks, microbial quantity with denitrification function in the IS accounted for 71.01 % of the microorganism related to nitrogen metabolism, which was higher than that of 48.84 % in the independent CWs, indicating that the presence of microalgae in IS played important role in promoting biological denitrification. These findings provide insights into the microbial mechanism and highlights the complementary effects between microalgae and CWs.