Synthesis of magnetic adsorbents from titanium gypsum and biomass wastes for enhanced phosphate removal

Ultrafast and highly efficient Cd(II) and Pb(II) removal by magnetic adsorbents derived from gypsum and corncob: Performances and mechanisms

The utilization of gypsum and biomass in environmental remediation has become a novel approach to promote waste recycling. Generally, raw waste materials exhibit limited adsorption capacity for heavy metal ions (HMIs) and often result in poor solid-liquid separation. In this study, through co-pyrolysis with corncob waste, titanium gypsum (TiG) was transformed into magnetic adsorbents (GCx, where x denotes the proportion of corncob in the gypsum-corncob mixture) for the removal of Cd(II) and Pb(II). GC10, the optimal adsorbent, which was composed primarily of anhydrite, calcium sulfide, and magnetic Fe3O4, exhibited significantly faster adsorption kinetics (rate constant k1 was 218 times and 9 times of raw TiG for Cd(II) and Pb(II)) and higher adsorption capacity (Qe exceeded 200 mg/g for Cd(II) and 400 mg/g for Pb(II)) than raw TiG and previous adsorbents. Cd(II) removal was more profoundly inhibited in a Cd(II) + Pb(II) binary system, suggesting that GC10 showed better selectivity for Pb(II). Moreover, GC10 could be easily separated from purified water for further recovery, due to its high saturation magnetization value (6.3 emu/g). The superior removal capabilities of GC10 were due to adsorption and surface precipitation of metal sulfides and metal sulfates on the adsorbent surface. Overall, these waste-derived magnetic adsorbents provide a novel and sustainable approach to waste recycling and the deep purification of multiple HMIs.

Removal and recovery of phosphate by modified oyster shell and its fertilizer application

The resource utilization of oyster shell (OS) is essential for environmental and human health because its random disposal can induce the environmental pollution and disease spread. Herein, MnFe2O4 loaded-oyster shell (OMFs) was prepared by co-precipitation method for phosphate removal and recovery. The salt etching and MnFe2O4 (MF) loading improved the adsorption performance of OS, and the maximum adsorption capacity of OMF0.02 reached 87.39 mg P/g. Phosphate adsorption was dominated by chemisorption and its rate was limited by membrane diffusion and intra-particle diffusion. Phosphate adsorption by OMF0.02 was involved with electrostatic attraction, surface precipitation and ligand exchange. 98.95 % phosphate on saturated adsorbent could be desorbed by 0.1 mol/L malic acid and 92.31 % adsorbed phosphate was released by 0.5 mol/L NaHCO3. Furthermore, phosphate adsorbed on OMF0.02 was plant-available basing on the results of water spinach growth trial. All the results implied the bright prospect of OMF0.02 in phosphate removal and recovery from wastewater.