Purification efficiency of Pyropia-processing wastewater and microalgal biomass production by the combination of Chlorella sp. C2 cultivated at different culture temperatures and chitosan

Microbial Level and Microbiota Change of Laver in Dried Laver Processing Line During Production Seasons

To understand better the high microbial load in dried laver (Porphyra yezoensis or nori), this study analyzed the aerobic plate count (APC), coliform count, temperature change, and microbiota of processing water, laver materials, and food contact surface (FCS) samples from three processing plants during the dried laver processing season from December 2023 to April 2024. The seawater used for the first washing had a low microbial load (APCs < 1-2.85 log CFU/g; coliform < 1 log CFU/g) and was dominated by Proteobacteria, Firmicutes, and Bacteroidota. The microbial load of fresh laver (4.21-4.76 log CFU/g) remained unchanged after seawater washing, but significantly increased after continuous shredding, sponge dehydration, first drying, and with the seasonal temperature rise. The microbiota of laver before drying was vulnerable between processing steps and seasons, but consistently shifted back to fresh laver microflora and was dominated by Flavobacteriaceae after drying. The FCSs (except for the curtain), which had a high microbial load (APCs 5.25-8.26 log CFU/g; coliform 1.52-4.84 log CFU/g) with similar microbiota to seawater, caused the secondary contamination of laver during processing. This study revealed the microbial proliferation of laver and seawater microflora in the continuous processing line with high nutrients and with the seasonal processing water temperature rise caused by the local weather, highlighting the need for routine cleaning and sanitizing, better washing of fresh laver, and low temperature control for future dried laver production.

Continuous microalgal culture module and method of culturing microalgae containing macular pigment

This study established and investigated continuous macular pigment (MP) production with a lutein (L):zeaxanthin (Z) ratio of 4-5:1 by an MP-rich Chlorella sp. CN6 mutant strain in a continuous microalgal culture module. Chlorella sp. CN6 was cultured in a four-stage module for 10 days. The microalgal culture volume increased to 200 L in the first stage (6 days). Biomass productivity increased to 0.931 g/L/day with continuous indoor white light irradiation during the second stage (3 days). MP content effectively increased to 8.29 mg/g upon continuous, indoor white light and blue light-emitting diode irradiation in the third stage (1 day), and the microalgal biomass and MP concentrations were 8.88 g/L and 73.6 mg/L in the fourth stage, respectively. Using a two-step MP extraction process, 80 % of the MP was recovered with a high purity of 93 %, and its L:Z ratio was 4-5:1.

Effects of environmental microplastic exposure on Chlorella sp. biofilm characteristics and its interaction with nitric oxide signaling

Microalgal biofilm is promising in simultaneous pollutants removal, CO2 fixation, and biomass resource transformation when wastewater is used as culturing medium. Nitric oxide (NO) often accumulates in microalgal cells under wastewater treatment relevant abiotic stresses such as nitrogen deficiency, heavy metals, and antibiotics. However, the influence of emerging contaminants such as microplastics (MPs) on microalgal intracellular NO is still unknown. Moreover, the investigated MPs concentrations among existing studies were mostly several magnitudes higher than in real wastewaters, which could offer limited guidance for the effects of MPs on microalgae at environment-relevant concentrations. Therefore, this study investigated three commonly observed MPs in wastewater at environment-relevant concentrations (10-10,000 μg/L) and explored their impacts on attached Chlorella sp. growth characteristics, nutrients removal, and anti-oxidative responses (including intracellular NO content). The nitrogen source NO3--N at 49 mg/L being 20 % of the nitrogen strength in classic BG-11 medium was selected for MPs exposure experiments because of least intracellular NO accumulation, so that disturbance of intracellular NO by nitrogen availability could be avoided. Under such condition, 10 μg/L polyethylene (PE) MPs displayed most significant microalgal growth inhibition comparing with polyvinyl chloride (PVC) and polyamide (PA) MPs, showing extraordinarily low chlorophyll a/b ratios, and highest superoxide dismutase (SOD) activity and intracellular NO content after 12 days of MPs exposure. PVC MPs exposed cultures displayed highest malonaldehyde (MDA) content because of the toxic characteristics of organochlorines, and most significant correlations of intracellular NO content with conventional anti-oxidative parameters of SOD, CAT (catalase), and MDA. MPs accelerated phosphorus removal, and the type rather than concentration of MPs displayed higher influences, following the trend of PE > PA > PVC. This study expanded the knowledge of microalgal biofilm under environment-relevant concentrations of MPs, and innovatively discovered the significance of intracellular NO as a more sensitive indicator than conventional anti-oxidative parameters under MPs exposure.