Pseudomonas umsongensis GO16 as a platform for the in vivo synthesis of short and medium chain length polyhydroxyalkanoate blends

Characterisation and Harnessing of 5-Hydroxymethylfurfural Metabolism in Pseudomonas umsongensis GO16 for the Production of 2,5-Furandicarboxylic Acid

In the search for biobased alternatives to traditional fossil plastics, 2,5-furandicarboxylic acid (FDCA) represents a potential substitute to terephthalic acid (TPA), a monomer of the ubiquitous polyester, polyethylene terephthalate (PET). Pseudomonas umsongensis GO16, which can metabolise TPA and ethylene glycol (EG), can also oxidise 5-hydroxymethylfurfural (HMF), a precursor to FDCA. The enzymes involved in the oxidation to FDCA, PsfA and PsfG, were identified and characterised. Deletion of FDCA decarboxylase HmfF involved in the conversion of FDCA to furoic acid, and subsequently to a central metabolic intermediate, 2-ketoglutarate, allowed for the accumulation of FDCA. GO16 ΔhmfF cells were grown on glycerol, TPA, EG or mock PET hydrolysate, and the catalyst was then used for the biotransformation of HMF to FDCA. When TPA was used as a growth substrate and to power the biotransformation, the transport of 5-hydroxymethyl-2-furancarboxylic acid (HMFCA) into the cytoplasm represented a rate-limiting step in HMF oxidation. De-bottlenecking transport limitations through in trans overexpression of the HMFCA transporter (HmfT) along with the PsfA aldehyde dehydrogenase and PsfG alcohol dehydrogenase allowed 100% conversion of 50 mM HMF to FDCA within 24 h when TPA, EG or mock PET hydrolysate were used to grow the biocatalyst and subsequently to power the biotransformation. This expands the repertoire of valuable products obtained from engineered P. umsongensis GO16 in the strategy to bio-upcycle post-consumer PET.

New model compounds for the efficient colorimetric screening of medium chain length polyhydroxyalkanoate (mcl-PHA) depolymerases reveal mechanism of activity

Plastic pollution presents a significant environmental problem contributing to increased CO2 emissions and persistently accumulation in ecosystems. Biobased polymers, like polyhydroxyalkanoates (PHAs), offer a part of a solution with their biodegradability and reduced carbon footprint. However, effective end-of-life strategies, such as controlled enzymatic depolymerization, are crucial for sustainability, relying on efficient PHA depolymerases (PHAases). Here we describe the synthesis of two new chromogenic compounds derived from polyhydroxyoctanoate (PHO) and their application in a continuous, quantitative spectrophotometric assay for PHO depolymerase and other medium chain lengths PHAase activity within 10 min. These substrates allow activity measurement at temperatures above 45 °C, simplifying the comparison of PHAases and aiding enzymatic degradation progress. The study also explores enzyme specificity and identifies key amino acids involved in PHO recognition by PfPHOase. The 3-hydroxyoctanoyl moieties of both compounds were found to bind specifically to a groove formed by the amino acids Phe96, Phe125, Ile171, and Val230, which are highly conserved in known mcl-PHA depolymerases.

Production and functionalization strategies for superior polyhydroxybutyrate blend performance

This study investigates the effects of blending poly(3-hydroxybutyrate) (PHB) with microcrystalline cellulose (MCC), polylactic acid (PLA), lignin, and polyethylene glycol (PEG) on the properties of the resulting composite materials. Using a melt blending method, the composites were characterized by scanning electron microscopy (SEM), nuclear magnetic resonance (NMR), and thermogravimetric analysis (TGA). The results reveal that blending PHB with MCC, PLA, lignin, and PEG significantly enhances the thermal stability, mechanical strength, and biodegradability of the composites compared to pure PHB. Specifically, the tensile strength of PHB-PLA blends increased by up to 47.77 MPa, compared to 27.16 MPa for pure PHB. The blend with 50 % cellulose content showed the highest tensile strength of 54.91 MPa. TGA results show that the PHB-MCC and PHB-lignin blends exhibit improved thermal stability, with onset degradation temperatures rising to 294.8 °C, compared to 275 °C for pure PHB. Moreover, the PHB-lignin blend demonstrated a gradual weight loss starting at 200 °C and continuing until about 350 °C. SEM images of the blends indicate a uniform microstructure, contributing to the improved mechanical properties. The PHB-PEG blend demonstrated an elongation at break of 4.34 %, significantly higher than the 2.15 % for pure PHB, highlighting its suitability for applications requiring pliable materials. The biodegradability tests showed that PHB-PLA blends maintained consistent degradation rates, making them advantageous for applications needing controlled biodegradability. These findings suggest that blending PHB with MCC, PLA, lignin, and PEG can produce materials with enhanced properties suitable for applications in packaging, biomedical devices, and other areas where both performance and sustainability are essential.

Acid hydrolysis of Solanum tuberosum periderm for accumulation of polyhydroxyalkanoates in Pseudomonas putida MTCC 2475

Polyhydroxyalkanoates are a class of biodegradable, biocompatible polymers composed of polyesters of R-hydroxyalkanoic acids and deposited intracellularly by a variety of microorganisms which have potential to serve as alternative to commercial plastic. Bioplastics are gaining attention due to sustainability, biodegradability, biocompatibility, and lower carbon footprint. Nevertheless, the commercialization of PHA is predominantly hindered by the elevated production expenses arising primarily from the use of a pure sugar substrate. Our study has established a feasible method for bioplastic formation applying Pseudomonas putida MTCC 2475 and Solanum tuberosum periderm as a carbon source. To optimize the sugar yield response surface methodology was used, which released 69.34% ± 0.25% reducing sugar. PHA production experiments were performed in hydrolysate containing media as well as commercial sugar containing mineral salt media. After 48 h of fermentation of using this sugar, a biomass concentration of 2.19 gL-1, with a PHA production of 0.60 gL-1 (28.71% ± 0.55%) was obtained which was comparatively similar with synthetic media (2.56 gL-1 cell dry weight and 29.97% ± 0.45% PHA). Furthermore, the monomers of PHA produced by hydrolysate were characterized using Gas chromatography-mass spectrometry, Fourier transform infrared spectroscopy, differential scanning calorimetry, and nuclear magnetic resonance. This investigation has identified three distinct monomers of medium-chain PHAs, namely, methyl 3-Hydroxydodecanoate, 3-Hydroxytetradecanoate, and Hexadecanoic acid 3-Hydroxy methyl esters. Hence this study concludes a sustainable production of bioplastics from S. tuberosum periderm waste.