Synthetic receptors for chemical sensors—subnano- and micrometre patterning by imprinting techniques

Direct cell imprint lithography in superconductive carbon black polymer composites: process optimization, characterization and in vitro toxicity analysis

Cell imprint lithography (CIL) or cell replication plays a vital role in fields like biomimetic smart culture substrates, bone tissue engineering, cell guiding, cell adhesion, tissue engineering, cell microenvironments, tissue microenvironments, cell research, drug delivery, diagnostics, therapeutics and many other applications. Herein we report a new formulation of superconductive carbon black photopolymer composite and its characterization towards a CIL process technique. In this article, we demonstrated an approach of using a carbon nanoparticle-polymer composite (CPC) for patterning cells. It is observed that a 0.3 wt % load of carbon nanoparticles (CNPs) in a carbon polymer mixture (CPM) was optimal for cell-imprint replica fabrication. The electrical resistance of the 3-CPC (0.3 wt %) was reduced by 68% when compared to N-CPC (0 wt %). This method successfully replicated the single cell with sub-organelle scale. The shape of microvesicles, grooves, pores, blebs or microvilli on the cellular surface was patterned clearly. This technique delivers a free-standing cell feature substrate. In vitro evaluation of the polymer demonstrated it as an ideal candidate for biomimetic biomaterial applications. This approach also finds its application in study based on morphology, especially for drug delivery applications and for investigations based on molecular pathways.

Diazonium Salt-Based Surface-Enhanced Raman Spectroscopy Nanosensor: Detection and Quantitation of Aromatic Hydrocarbons in Water Samples

Here, we present a surface-enhanced Raman spectroscopy (SERS) nanosensor for environmental pollutants detection. This study was conducted on three polycyclic aromatic hydrocarbons (PAHs): benzo[a]pyrene (BaP), fluoranthene (FL), and naphthalene (NAP). SERS substrates were chemically functionalized using 4-dodecyl benzenediazonium-tetrafluoroborate and SERS analyses were conducted to detect the pollutants alone and in mixtures. Compounds were first measured in water-methanol (9:1 volume ratio) samples. Investigation on solutions containing concentrations ranging from 10⁻⁶ g L⁻¹ to 10⁻³ g L⁻¹ provided data to plot calibration curves and to determine the performance of the sensor. The calculated limit of detection (LOD) was 0.026 mg L⁻¹ (10⁻⁷ mol L⁻¹) for BaP, 0.064 mg L⁻¹ (3.2 × 10⁻⁷ mol L⁻¹) for FL, and 3.94 mg L⁻¹ (3.1 × 10⁻⁵ mol L⁻¹) for NAP, respectively. The correlation between the calculated LOD values and the octanol-water partition coefficient (K_ow) of the investigated PAHs suggests that the developed nanosensor is particularly suitable for detecting highly non-polar PAH compounds. Measurements conducted on a mixture of the three analytes (i) demonstrated the ability of the developed technology to detect and identify the three analytes in the mixture; (ii) provided the exact quantitation of pollutants in a mixture. Moreover, we optimized the surface regeneration step for the nanosensor.

Surface enhancement of a molecularly imprinted polymer film using sacrificial silica beads for increasingl-arabitol chemosensor sensitivity and detectability

Sacrificial silica beads, used for increasing the specific surface area of a molecularly imprinted polymer film, improve the performance of the chemosensor.

Polythiophene nanofilms for sensitive fluorescence detection of viruses in drinking water

Molecular imprints of the tobacco necrosis virus (TNV) have been formed within polythiophene nanofilms with an approximate thickness of 200nm. These films have been electrochemically deposited onto conducting Au surfaces. Upon rebinding, the TNV-polythiophene complex changes the fluorescence intensity of the nanofilm. The fluorescence intensity at 410nm was observed to be proportional to the concentration of viruses in the range of 0.1-10ngL(-1) (0.15-15pg) with the lower calculated detection limit of 2.29ngL(-1) (3.4pg). The intensity of the fluorescence emission is not affected by the thickness of the polythiophene film and the nature of TNV specific binding sites. Kinetic data analyses showed that the nanofilm responds to TNV within 2min; and cross-selectivity studies with tobacco mosaic virus (TMV) showed an excellent specificity for the targeted TNV. These binding experiments demonstrate the potential of fluorescence emission for the specific, label free and rapid detection of viruses using nanofilm sensors. Taking into account the lower limit of detection, the fluorescence sensing reported here is reliable, simple to perform, rapid, cost-effective and offers a sensitive analytical method for virus detection in water resources.

Electrochemical detection of ractopamine based on a molecularly imprinted poly-o-phenylenediamine/gold nanoparticle–ionic liquid–graphene film modified glass carbon electrode

An electrochemical sensor for sensitive detection of ractopamine (RAC) was fabricated by using molecularly imprinted polymer (MIP) incorporation with graphene (GR), ionic liquid (IL) and gold nanoparticle (AuNPs) nanocomposites.

Blood Group Typing: From Classical Strategies to the Application of Synthetic Antibodies Generated by Molecular Imprinting

Blood transfusion requires a mandatory cross-match test to examine the compatibility between donor and recipient blood groups. Generally, in all cross-match tests, a specific chemical reaction of antibodies with erythrocyte antigens is carried out to monitor agglutination. Since the visual inspection is no longer useful for obtaining precise quantitative information, therefore there is a wide variety of different technologies reported in the literature to recognize the agglutination reactions. Despite the classical methods, modern biosensors and molecular blood typing strategies have also been considered for straightforward, accurate and precise analysis. The interfacial part of a typical sensor device could range from natural antibodies to synthetic receptor materials, as designed by molecular imprinting and which is suitably integrated with the transducer surface. Herein, we present a comprehensive overview of some selected strategies extending from traditional practices to modern procedures in blood group typing, thus to highlight the most promising approach among emerging technologies.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Thermo-nanoimprinted biomimetic probe for LPS and LTA immunosensing

A complex prepolymerized film comprising monomers, cross-linkers, and initiator is usually used to create molecularly imprinted polymers. We herein exploit ready-to-use resist materials and link molecular surface imprinting with UV- and thermo-nanoimprinting techniques to create a sensor layer for the specific recognition of the bacterial surface markers lipopolysaccharide (LPS) and lipoteichoic acid (LTA). To account for the highly polar moieties of LPS and LTA, we evaluate different resist and stamp materials of distinct surface properties by AFM and molecularly imprinted sorbent assays. Thermo nanoimprinting of LPS and LTA micelles to Epon 1002F films exhibits excellent sensitivity of up to 13 times increased signals compared to those of the nonimprinted films and negligible cross-reaction with the tested nonspecific analyte. Additionally, the sensitivity and selectivity of the thermo nanoimprints is compared to conventional molecular surface imprints using a cocktail of acrylic monomers in QCM measurements.

Cell-imprinted substrates direct the fate of stem cells

Smart nanoenvironments were obtained by cell-imprinted substrates based on mature and dedifferentiated chondrocytes as templates. Rabbit adipose derived mesenchymal stem cells (ADSCs) seeded on these cell-imprinted substrates were driven to adopt the specific shape (as determined in terms of cell morphology) and molecular characteristics (as determined in terms of gene expression) of the cell types which had been used as template for the cell-imprinting. This method might pave the way for a reliable, efficient, and cheap way of controlling stem cell differentiation. Data also suggest that besides residual cellular fragments, which are presented on the template surface, the imprinted topography of the templates plays a role in the differentiation of the stem cells.

Porous organic cage compounds as highly potent affinity materials for sensing by quartz crystal microbalances

Porosity makes powerful affinity materials for quartz crystal microbalances. The shape-persistent organic cages and pores create superior affinity systems to existing ones for direct tracing of aromatic solvent vapors. A shape and size selectivity for the analytes is observed. These organic cages can be processed to thin films with highly reproducible sensing properties.

Monitoring automotive oil degradation: analytical tools and onboard sensing technologies

Engine oil experiences a number of thermal and oxidative phases that yield acidic products in the matrix consequently leading to degradation of the base oil. Generally, oil oxidation is a complex process and difficult to elucidate; however, the degradation pathways can be defined for almost every type of oil because they mainly depend on the mechanical status and operating conditions. The exact time of oil change is nonetheless difficult to predict, but it is of great interest from an economic and ecological point of view. In order to make a quick and accurate decision about oil changes, onboard assessment of oil quality is highly desirable. For this purpose, a variety of physical and chemical sensors have been proposed along with spectroscopic strategies. We present a critical review of all these approaches and of recent developments to analyze the exact lifetime of automotive engine oil. Apart from their potential for degradation monitoring, their limitations and future perspectives have also been investigated.

Liquid-phase chemical sensing using lateral mode resonant cantilevers

Liquid-phase operation of resonant cantilevers vibrating in an out-of-plane flexural mode has to date been limited by the considerable fluid damping and the resulting low quality factors (Q factors). To reduce fluid damping in liquids and to improve the detection limit for liquid-phase sensing applications, resonant cantilever transducers vibrating in their in-plane rather than their out-of-plane flexural resonant mode have been fabricated and shown to have Q factors up to 67 in water (up to 4300 in air). In the present work, resonant cantilevers, thermally excited in an in-plane flexural mode, are investigated and applied as sensors for volatile organic compounds in water. The cantilevers are fabricated using a complementary metal oxide semiconductor (CMOS) compatible fabrication process based on bulk micromachining. The devices were coated with chemically sensitive polymers allowing for analyte sorption into the polymer. Poly(isobutylene) (PIB) and poly(ethylene-co-propylene) (EPCO) were investigated as sensitive layers with seven different analytes screened with PIB and 12 analytes tested with EPCO. Analyte concentrations in the range of 1-100 ppm have been measured in the present experiments, and detection limits in the parts per billion concentration range have been estimated for the polymer-coated cantilevers exposed to volatile organics in water. These results demonstrate significantly improved sensing properties in liquids and indicate the potential of cantilever-type mass-sensitive chemical sensors operating in their in-plane rather than out-of-plane flexural modes.

Surface Nano-patterning of Polymers for Mass-Sensitive Biodetection

The crafting of sensor material of desired features has always remained a challenging task in the field of material designing and predominantly becomes more interesting when analyte belongs to biospecies. Label-free detection of different bioanalytes such as enzymes, viruses, microorganisms, and blood groups through mass-sensitive transducers has gained considerable importance in the development of modern biosensors. Analyte molecules interact with the surface of sensitive layer coated on these devices and as a result of this interaction, the frequency change is determined, which provides quantitative information about the mass of analyte. One of the most vital elements of these detection systems is to design selective sensor coatings through control surface structuring at nanoscale. Molecular imprinting has proven to be a highly suitable technique to generate selective surfaces that are capable of detecting different analytes, quantitatively and qualitatively as well. The tailor-made synthetic antibody cavities are rigid and stable, which are not immediately collapsed upon analyte interaction; moreover, the different bioanalytes do not undergo any phase change and maintain their original identity during analysis. This chapter will discuss the contribution of imprinting methods to design optimized surfaces for mass-sensitive detection of diverse biological species.

Chiral recognition applications of molecularly imprinted polymers: a critical review

Molecular imprinting technology offers the unique opportunity to tailor chiral stationary phases with predefined chiral recognition properties by employing the enantiomers of interest as binding-site-forming templates. Added advantages, such as ease of preparation, chemical robustness, low-cost production, and the possibility of shaping molecularly imprinted polymers (MIPs) in various self-supporting formats, render them attractive materials for a broad range of chiral recognition applications. In this review a critical overview on recent developments in the field of MIP-based chiral recognition applications is given, focusing on separation techniques and molecular sensing. Inherent limitations associated with the use of enantioselective MIP materials in high-performance separation techniques are outlined, including binding site heterogeneity and slow mass transfer characteristics. The prospects of MIP materials as versatile recognition elements for the design of enantioselective sensor systems are highlighted.

Nanotemplating for two-dimensional molecular imprinting

A new 2D molecular imprinting technique based on nanotemplating and soft-lithography techniques is reported. This technique allows the creation of target-specific synthetic recognition sites on different substrates using a uniquely oriented and immobilized template and the attachment of a molecularly imprinted polymer on a substrate. The molecularly imprinted polymer was characterized by AFM, fluorescence microscopy, and ATR-FTIR. We evaluated the rebinding ability of the sites with theophylline (the target molecule). The selectivity of the molecularly imprinted polymer was determined for the theophylline-caffeine couple. The molecularly imprinted polymer exhibited selectivity for theophylline, as revealed by competitive rebinding experiments. Fluorescence microscopy experiments provided complementary proof of the selectivity of the molecularly imprinted polymer surfaces toward theophylline. These selective molecularly imprinted polymers have the potential for chemical sensor applications. Because of its 2D nature, this novel chemical sensor technology can be integrated with many existing high-sensitivity multichannel detection technologies.

Quartz crystal microbalance for the determination of daminozide using molecularly imprinted polymers as recognition element

As the daminozide (DM) and its metabolite have been identified to be potentially carcinogenic, rapid detection method for them is necessary for food safety. A type of piezoelectric crystal sensor has been prepared by using a molecularly imprinted polymer (MIP) as recognition element. The molecularly imprinted polymer was prepared by hot-induced precipitation polymerization, and then the polymer particles were fixed on the surface of the electrode. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were employed to evaluate the obtained imprinted polymer particles and the MIP sensitive film coated on the electrode. The results showed that a typical time-response curve of the MIP-coated crystal to the DM solution had been given, frequency shifts versus logarithm changes of DM showed good linear correlation within the concentration range of 1.0x10(-9) to 10(-6) mg/mL (y=11.38 lg x+115.45, r=0.9872) and 1.0x10(-6) to 10(-1) mg/mL (y=25.22lgx+209.44, r=0.9938), respectively. The detection limit was 5.0x10(-8) mg/mL (S/N=3), which is lower than that of conventional methods. Further, computer simulation technology was employed to investigate the interaction between methacrylic acid and DM for elucidating the recognition mechanism. The influencing factor pH has also been investigated. The injection experiments of DM structurally related compounds indicated that the obtained sensor has high sensitivity, excellent selectivity, low cost, good reproducibility, and reusable property by combining with piezoelectric crystal and molecularly imprinted polymer.

Sensor technology and its application in environmental analysis

Environmental analysis is one of the fundamental applications of chemical sensors. In this review we describe different sensor systems for the gas and liquid phases that have been tested either with real-life samples or in the field during the last five years. Most field sensors rely either on electrochemical or optical transducers. In the gas phase, systems have been proposed for analysis of oxides of nitrogen, carbon, and sulfur in air, and volatile organic compounds. In the liquid phase, most detection systems used for real-life samples detect heavy-metal ions or organic contamination, for example pesticides, organic solvents and polycyclic aromatic hydrocarbons.

Cavities generated by self-organised monolayers as sensitive coatings for surface acoustic wave resonators

Silanisation of quartz substrate surfaces with a mixture of two chlorosilanes, namely trimethylchlorosilane and 7-octenyldimethylchlorosilane, leads to sensitive coatings for volatile organic compounds (VOC) on surface acoustic wave (SAW) devices. In this way we created monolayers of molecular cavities engulfing the analytes according to host-guest chemistry directly on the device surfaces, and also confirmed the occurrence of such cavities by molecular modelling. We monitored the binding process of the silanes by using Fourier transform infrared (FTIR) spectrometry and atomic force microscopy (AFM). In order to increase the stiffness of the cavities, we crosslinked the terminal double bonds of the long spacers by heating the surface in the presence of a radical initiator. Compared to SAW delay lines silanised with trimethylchlorosilane, devices modified with the binary silane mixture lead to substantially higher frequency shifts when exposed to solvent vapour streams. Nearly instantaneous responses can be observed, which e.g. allows xylene detection down to a few ppm.

Ceramic Materials for Mass-Sensitive Sensors - Detection of VOCs and Monitoring Oil Degradation

Inorganic frameworks obtained by the sol-gel route can be templated by a molecular imprinting (MIP) approach to generate functional cavities. Such MIP ceramics show highly appreaciable properties for chemical sensor applications, because they are inherently chemically and thermally robust. In combination with mass-sensitive devices (e.g. quartz crystal micro balance – QCM, surface transverse wave oscillator - STW), they yield highly selective and sensitive chemical sensors. Gas phase measurements with volatile organic compounds (VOCs) e.g. lead to sensitivities below 1 ppm. Sensitivity can be tuned by the sol-gel-precursor: when hydrolysing more bulky alkoxides, this leads to enhanced sensitivity by increasing porosity as a consequence of slower solvent evaporation. By adding products of oxidative oil degradation to the sol-gel mixture, we succeeded in generating sensors for degradation processes in these complex matrices. This allows parallelly monitoring both the chemical state of oil and changes in viscosity. Sensitivity is enhanced according to the Sauerbrey equation by going from 10 MHz QCM transducers to higher frequencies either by etching the quartz substrates and so reducing the resonator thickness or by applying STWs.

Microbial imprinted polypyrrole/poly(3-methylthiophene) composite films for the detection of Bacillus endospores

The fabrication of Bacillus subtilis endospore imprinted conducting polymer films and subsequent electrochemical detection of bound spores is reported. Imprinted films were prepared by absorbing spores on the surface of glassy carbon electrodes upon which a polypyrrole, followed by a poly(3-methylthiophene), layer were electrochemically deposited. Spore template release was achieved through soaking the modified electrode in DMSO. Binding of endospores to imprinted films could be detected via impedance spectroscopy by monitoring changes in Y'' (susceptance) using Mn(II)Cl2 (0.5M pH 3) as the supporting electrolyte. Here, the change in Y'' could be correlated to spore densities between 10(4) and 10(7)cfu/ml. More sensitive detection of absorbed spores was achieved by following endospore germination via changes in film charge as measured using cyclic voltammetry. Here, imprinted films were submerged in spore suspensions to permit absorption, heat activated at 70 degrees C for 10 min prior to transferring to an electrochemical cell containing germination activators. By using the assay format it was possible to detect 10(2)cfu/ml. The observed changes in film charge could be attributed to the interaction of the supporting conducting polymer with dipicolinic acid (DPA) and other constituents released from the core in the course of germination. In all cases, it was not possible to regenerate the imprinted films without losing electrode response. In summary, the study has provided proof-of-concept for fabricating microbial imprinted films using conducting polymers.