A label-free strategy for SNP detection with high fidelity and sensitivity based on ligation-rolling circle amplification and intercalating of methylene blue

Portable Device with Nicking Enzyme Enhanced Special RCA on μPADs toward Sensitive Detection of High-Risk HPV Infection

Development of an accurate, rapid, and cost-effective portable device is in high demand for point-of-care molecular diagnosis toward disease screening. Here we report a one-pot homogeneous isothermal assay that leverages nicking endonuclease and minimum secondary structured rolling circle amplification (N-MSSRCA) for fast and sensitive quantification of nucleic acids on distance microfluidic paper-based analytical devices (dμPAD) by a portable custom-made fluorescence detector. Human papillomavirus (HPV) oncogenic E7 mRNA as the biomarker for cervical cancer was used as the model analyte. N-MSSRCA integrates ligase for target recognition, the nicking enzyme for primer generation, and the dual function of the Phi29 DNA polymerase for both on- and off-loop amplification. The proposed method was capable of detecting 1 and 10 fM of the analyte using the microplate reader and portable detector with dμPAD, respectively, with ∼1 h assay time. A cohort study of 40 cervical swab samples shows N-MSSRCA reached positive and negative predictive values of 87.5% and 93.5% using the portable detector with dμPAD, compared to 91.67% and 100% using the microplate reader. N-MSSRCA demonstrates potential in early screening of high-risk HPV infection as a generic strategy to detect various nucleic acids in point-of-care scenarios.

A multi-cycle signal amplification-mediated single quantum dot nanosensor for PIWI-interacting RNA detection

We construct a single quantum dot-based nanosensor for piRNA detection based on ligation-mediated multi-cycle signal amplification. This nanosensor is homogenous, selective, and sensitive with a detection limit of 0.104 fM. Moreover, it can detect the endogenous piRNA level in different cell lines, and discriminate cancer tissues from normal tissues.

A polyethylene glycol enhanced ligation-triggered self-priming isothermal amplification for the detection of SARS-CoV-2 D614G mutation

We presented a polyethylene glycol (PEG) enhanced ligation-triggered self-priming isothermal amplification (PEG-LSPA) for the detection D614G mutation in S-glycoprotein of SARS-CoV-2. PEG was employed to improve the ligation efficiency of this assay by constructing a molecular crowding environment. Two hairpin probes (H1 and H2) were designed to contain 18 nt and 20 nt target binding site at their 3' end and 5' end, respectively. In presence of target sequence, it complemented with H1 and H2 to trigger ligation by ligase under molecular crowding condition to form ligated H1-H2 duplex. Then 3' terminus of the H2 would be extended by DNA polymerase under isothermal conditions to form a longer extended hairpin (EHP1). 5' terminus of EHP1 with phosphorothioate (PS) modification could form hairpin structure due to the lower Tm value. The resulting 3' end overhang would also fold back as a new primer to initiate the next round of polymerization, resulting in the formation of a longer extended hairpin (EHP2) containing two target sequence domains. In the circle of LSPA, long extended hairpin (EHPx) containing numerous target sequence domains was produced. The resulting DNA products can be monitored in real-time fluorescence signaling. Our proposed assay owns an excellent linear range from 10 fM to 10 nM with a detection limit down to 4 fM. Thus, this work provides a potential isothermal amplification method for monitoring mutations in SARS-CoV-2 variants.

Electrochemical biosensors for analysis of DNA point mutations in cancer research

Cancer is a genetic disease induced by mutations in DNA, in particular point mutations in important driver genes that lead to protein malfunctioning and ultimately to tumorigenesis. Screening for the most common DNA point mutations, especially in such genes as TP53, BRCA1 and BRCA2, EGFR, KRAS, or BRAF, is crucial to determine predisposition risk for cancer or to predict response to therapy. In this review, we briefly depict how these genes are involved in cancer, followed by a description of the most common techniques routinely applied for their analysis, including high-throughput next-generation sequencing technology and less expensive low-throughput options, such as real-time PCR, restriction fragment length polymorphism, or high resolution melting analysis. We then introduce benefits of electrochemical biosensors as interesting alternatives to the standard methods in terms of cost, speed, and simplicity. We describe most common strategies involved in electrochemical biosensing of point mutations, relying mostly on PCR or isothermal amplification techniques, and critically discuss major challenges and obstacles that, until now, prevented their more widespread application in clinical settings.

Nonenzymatic Multiamplified Electrochemical Detection of Medulloblastoma-Relevant MicroRNAs from Cerebrospinal Fluid

The sensitive analysis of microRNAs (miRNAs) in cerebrospinal fluid (CSF) holds promise for the minimally invasive early diagnosis of brain cancers such as pediatric medulloblastoma but remains challenging due partially to a lack of facile yet sensitive sensing methods. Herein, an enzyme-free triple-signal amplification electrochemical assay for miRNA was developed by integrating the target-triggered cyclic strand-displacement reaction (TCSDR), hybridization chain reaction (HCR), and methylene blue (MB) intercalation. In this assay, the presence of target miRNA (miR-9) initiated the TCSDR and produced primers that triggered the subsequent HCR amplification to generate copious double-stranded DNAs (dsDNAs) on the electrode surface. Intercalation of a large number of MB reporters into the long nicked double helixes of dsDNAs yielded a more enhanced signal of differential pulse voltammetry. The enzyme-free multiple-amplification approach allowed for highly sensitive (detection limit: 6.5 fM) and sequence-specific (single-base mismatch resolution) detection of miR-9 from tumor cells and human CSF with minimal sample consumption (10 μL). Moreover, the clinical utilization of this method was documented by accurate discrimination of five medulloblastoma patients from the nontumoral controls. In light of its sensitivity, specificity, and convenience of use, this electrochemical method was expected to facilitate the early detection of malignant brain tumors.

Fishing unfunctionalized SERS tags with DNA hydrogel network generated by ligation-rolling circle amplification for simple and ultrasensitive detection of kanamycin

Simple assay format-based SERS methods for sensitive target substance analysis is of great significance for the development of on-site monitoring biosensors. Herein, taking the typical antibacterial kanamycin (KANA) as a subject, a simple, highly sensitive and specific SERS aptasensor was developed by manipulating DNA hydrogel network to fish plasmonic core-shell nanoparticles. A competitive binding mode of aptamer, ligation-rolling circle amplification (L-RCA), gap-containing Au@Au nanoparticles (GCNPs) with embedded Raman reporters were integrated into the sensor. In the presence of KANA, the double stranded DNA (dsDNA) structure of the aptamer was disrupted, and the released primers were used to construct two kinds of circularized padlock probes (CPPs) which were partially complementary. DNA hydrogel network was formed through the intertwining and self-assembly of two RCA-generated single stranded DNA (ssDNA) chains, during which GCNPs and magnetic beads (MBs) were entangled and incorporated. Finally, KANA quantification was successfully achieved through the quantification of the DNA hydrogel. Overall, this novel SERS aptasensor realized a simple and ultrasensitive quantification of KANA down to 2.3 fM, plus excellent selectivity, and precision even for real food samples. In view of innovative fusion across L-RCA-based DNA hydrogel and SERS technique, the proposed method has promising potential for application in on-site detection and quantification of trace food contaminants.

Nucleic Acid Tests for Clinical Translation

Nucleic acids, including deoxyribonucleic acid (DNA) and ribonucleic acid (RNA), are natural biopolymers composed of nucleotides that store, transmit, and express genetic information. Overexpressed or underexpressed as well as mutated nucleic acids have been implicated in many diseases. Therefore, nucleic acid tests (NATs) are extremely important. Inspired by intracellular DNA replication and RNA transcription, in vitro NATs have been extensively developed to improve the detection specificity, sensitivity, and simplicity. The principles of NATs can be in general classified into three categories: nucleic acid hybridization, thermal-cycle or isothermal amplification, and signal amplification. Driven by pressing needs in clinical diagnosis and prevention of infectious diseases, NATs have evolved to be a rapidly advancing field. During the past ten years, an explosive increase of research interest in both basic research and clinical translation has been witnessed. In this review, we aim to provide comprehensive coverage of the progress to analyze nucleic acids, use nucleic acids as recognition probes, construct detection devices based on nucleic acids, and utilize nucleic acids in clinical diagnosis and other important fields. We also discuss the new frontiers in the field and the challenges to be addressed.

Allele-specific PCR with a novel data processing method based on difference value for single nucleotide polymorphism genotyping of ALDH2 gene

Single nucleotide polymorphism (SNP) analysis based on allele-specific polymerase chain reaction (AS-PCR) is a relatively effective and economical method compared with other genotyping technologies such as DNA sequencing, DNA hybridization and isothermal amplification strategies. But AS-PCR is limited by its labor-intensive optimization of reaction parameters and time-consuming result assessment. In this study, we put forward a novel idea of data processing to address this problem. SNP analysis was accomplished by AS-PCR with endpoint electrochemical detection. For each sample, two separate reactions were run simultaneously with two sets of allele-specific primers (wild-type primers for W system and mutant primers for M system). We measured their redox current signals on screen-printed electrodes once AS-PCR finished and calculated the difference value of current signals between two systems to determine the genotyping result. Based on the difference value of fluorescent signals, real-time fluorescent PCR was used to study reaction parameters in AS-PCR. With screened parameters, we obtained the genotyping results within 50 min. 36 hair-root samples from volunteers were analyzed by our method and their genotypes of ALDH2 gene (encoding aldehyde dehydrogenase 2) were totally identical with data from commercialized sequencing. Our work first employed difference value between two reaction systems to differentiate allele and provided a novel idea of data processing in AS-PCR method. It is able to promote the quick analysis of SNP in the fields of health monitor, disease precaution, and personalized diagnosis and treatment.

Molecular inversion probe-rolling circle amplification with single-strand poly-T luminescent copper nanoclusters for fluorescent detection of single-nucleotide variant of SMN gene in diagnosis of spinal muscular atrophy

In this study, a simple fluorescent detection of survival motor neuron gene (SMN) in diagnosis of spinal muscular atrophy (SMA) based on nucleic acid amplification test and the poly-T luminescent copper nanoclusters (CuNCs) was established. SMA is a severely genetic diseases to cause infant death in clinical, and detection of SMN gene is a powerful tool for pre- and postnatal diagnosis of this disease. This study utilized the molecular inversion probe for recognition of nucleotide variant between SMN1 (c.840 C) and SMN2 (c.840 C  >  T) genes, and rolling circle amplification with a universal primer for production of poly-T single-strand DNA. Finally, the fluorescent CuNCs were formed on the poly-T single-strand DNA template with addition of CuSO₄ and sodium ascorbate. The fluorescence of CuNCs was only detected in the samples with the presence of SMN1 gene controlling the disease of SMA. After optimization of experimental conditions, this highly efficient method was performed under 50 °C for DNA ligation temperature by using 2U Ampligase, 3 h for rolling circle amplification, and the formation of the CuNCs by mixing 500 μM Cu²⁺ and 4 mM sodium ascorbate. Additionally, this highly efficient method was successfully applied for 65 clinical DNA samples, including 4 SMA patients, 4 carriers and 57 wild individuals. This label-free detection strategy has the own potential to not only be a general method for detection of SMN1 gene in diagnosis of SMA disease, but also served as a tool for detection of other single nucleotide polymorphisms or nucleotide variants in genetic analysis through designing the different sensing probes.

Automated on-chip analysis of tuberculosis drug-resistance mutation with integrated DNA ligation and amplification

Detection of a single base mutation in Mycobacterium tuberculosis DNA can provide fast and highly specific diagnosis of antibiotic-resistant tuberculosis. Mutation-specific ligation of padlock probes (PLPs) on the target followed by rolling circle amplification (RCA) is highly specific, but challenging to integrate in a simple microfluidic device due to the low temperature stability of the phi29 polymerase and the interference of phi29 with the PLP annealing and ligation. Here, we utilized the higher operation temperature and temperature stability of Equiphi29 polymerase to simplify the integration of the PLP ligation and RCA steps of an RCA assay in two different strategies performed at uniform temperature. In strategy I, PLP annealing took place off-chip and the PLP ligation and RCA were performed in one pot and the two reactions were clocked by a change of the temperature. For a total assay time of about 1.5 h, we obtained a limit of detection of 2 pM. In strategy II, the DNA ligation mixture and the RCA mixture were separated into two chambers on a microfluidic disc. After on-disc PLP annealing and ligation, the disc was spun to mix reagents and initiate RCA. For a total assay time of about 2 h, we obtained a limit of detection of 5 pM. Graphical abstract.

Rolling circle amplification based colorimetric determination of Staphylococcus aureus

A colorimetric microplate assay for determination of Staphylococcus aureus DNA is described. Linear padlock probes were designed to recognize target sequences. After DNA binding, the linear padlock probes were circularized by ligation and then hybridize with biotin-labeled capture probes. Biotin-labeled capture probes act as primers to initiate the RCA. The biotin-labeled RCA products hybridize with digoxin-labeled signal probes fixed on streptavidin-functionalized wells of a 96-well plate. To enhance sensitivity, an AuNP-anti-digoxigenin-POx-HRP conjugate was added to the wells and then bound to digoxin-labeled signalling probes. The oxidation of tetramethylbenzidine (TMB) by H₂O₂ produces a color change from colorless to blue via HRP catalysis. After the reaction was terminated, absorbance is measured at 450 nm. For target sequences of Staphylococcus aureus, the detection limit is 1.2 pM. For genomic DNA, the detection limit is 7.4 pg.μL^-1. The potential application of the method was verified by analyzing spiked food samples. Graphical abstractSchematic representation of rolling circle amplification and functionalized AuNP-based colorimetric determination of Staphylococcus aureus. The method uses streptavidin-functionalized 96-well plates and RCA as a molecular tool and AuNP-anti-digoxigenin-POx-HRP as signal transduction markers to increase sensitivity.

Optomagnetic Detection of Rolling Circle Amplification Products

Rolling circle amplification (RCA) of a synthetic nucleic acid target is detected using magnetic nanoparticles (MNPs) combined with an optomagnetic (OM) readout. Two RCA assays are developed with on-chip detection of rolling circle products (RCPs) either at end-point where MNPs are mixed with the sample after completion of RCA or in real time where MNPs are mixed with the sample during RCA. The plastic chip acts as a cuvette, which is positioned in a setup integrated with temperature control and simultaneous detection of four parallel DNA hybridization reactions between functionalized MNPs and products of DNA amplification. The OM technique probes the small-angle rotation of MNPs bearing oligonucleotide probes complementary to the repeated nucleotide sequence of the RCPs. This rotation is restricted when MNPs bind to RCPs, which can be observed as a turn-off of the signal from MNPs that are free to rotate. The amount of MNPs bound to RCPs is found to increase in response to the amplification time as well as in response to the synthetic DNA target concentration (2-40 pM dynamic range). We report OM real-time results obtained with MNPs present during RCA and compare to relevant end-point OM results for RCPs generated for different RCA times. The real-time approach avoids opening of tubes post-RCA and thus reduces risk of lab contamination with amplification products without compromising the sensitivity and dynamic range of the assay.

Combining magnetic nanoparticle capture and poly-enzyme nanobead amplification for ultrasensitive detection and discrimination of DNA single nucleotide polymorphisms

The development of ultrasensitive methods for detecting specific genes and discriminating single nucleotide polymorphisms (SNPs) is important for biomedical research and clinical disease diagnosis. Herein, we report an ultrasensitive approach for label-free detection and discrimination of a full-match target-DNA from its cancer related SNPs by combining magnetic nanoparticle (MNP) capture and poly-enzyme nanobead signal amplification. It uses a MNP linked capture-DNA and a biotinylated signal-DNA to sandwich the target followed by ligation to offer high SNP discrimination: only the perfect-match target-DNA yields a covalently linked biotinylated signal-DNA on the MNP surface for subsequent binding to a neutravidin-horseradish peroxidase conjugate (NAV-HRP) for signal amplification. The use of polymer nanobeads each tagged with thousands of copies of HRPs greatly improves the signal amplification power, allowing for direct, amplification-free quantification of low aM target-DNA over 6 orders of magnitude (0.001-1000 fM). Moreover, this sensor also offers excellent discrimination between the perfect-match gene and its cancer-related SNPs and can positively detect 1 fM perfect-match target-DNA in the presence of 100 fold excess of co-existing single-base mismatch targets. Furthermore, it works robustly in clinically relevant media (e.g. 10% human serum) and gives even higher SNP discrimination than that in clean buffers. This ultrasensitive DNA sensor appears to have excellent potential for rapid detection and diagnosis of genetic diseases.

Ligase chain reaction-based electrochemical biosensor for the ultrasensitive and specific detection of single nucleotide polymorphisms

In this study, a sensitive electrochemical biosensor for universally, robustly, specifically, and sensitively detecting SNPs was developed by using LCR as a signal amplification strategy.

Nicking-enhanced rolling circle amplification for sensitive fluorescent detection of cancer-related microRNAs

In this study, a biosensing system based on nicking-enhanced rolling circle amplification (N-RCA) was proposed for the highly sensitive detection of cancer-related let-7a microRNA (miRNA). The sensing system consists of a padlock probe (PP), which contains a target recognition sequence and two binding sites for nicking endonuclease (NEase), and molecular beacon (MB) as reporting molecule. Upon hybridization with let-7a, the PP can be circularized by ligase. Then, the miRNA acted as polymerization primer to initiate rolling circle amplification (RCA). With the assistance of NEase, RCA products can be nicked on the cyclized PP and are displaced during the subsequent duplication process, generating numerous nicked fragments (NFs). These NFs not only induce another RCA reaction but also open the molecular beacons (MBs) via hybridization, leading to significantly amplified fluorescence signal. Under the optimized conditions, this method exhibits high sensitivity toward target miRNA let-7a with a detection limit of as low as 10 pM, a dynamic range of three orders of magnitude is achieved, and its family member is easily distinguished even with only one mismatched base. Meanwhile, it displays good recovery and satisfactory reproducibility in fetal bovine serum (FBS). Therefore, these merits endow the newly proposed N-RCA strategy with powerful implications for miRNA detection. Graphical abstract A biosensing system based on nicking-enhanced rolling circle amplification (N-RCA) for the highly sensitive detection of cancer-related let-7a microRNA.

Research Progress on Rolling Circle Amplification (RCA)-Based Biomedical Sensing

Enhancing the limit of detection (LOD) is significant for crucial diseases. Cancer development could take more than 10 years, from one mutant cell to a visible tumor. Early diagnosis facilitates more effective treatment and leads to higher survival rate for cancer patients. Rolling circle amplification (RCA) is a simple and efficient isothermal enzymatic process that utilizes nuclease to generate long single stranded DNA (ssDNA) or RNA. The functional nucleic acid unit (aptamer, DNAzyme) could be replicated hundreds of times in a short period, and a lower LOD could be achieved if those units are combined with an enzymatic reaction, Surface Plasmon Resonance, electrochemical, or fluorescence detection, and other different kinds of biosensor. Multifarious RCA-based platforms have been developed to detect a variety of targets including DNA, RNA, SNP, proteins, pathogens, cytokines, micromolecules, and diseased cells. In this review, improvements in using the RCA technique for medical biosensors and biomedical applications were summarized and future trends in related research fields described.

A simple and ultrasensitive fluorescence assay for single-nucleotide polymorphism

In this report, a simple, label-free and highly efficient nucleic acid amplification technique is developed for ultrasensitive detection of single-nucleotide polymorphism (SNP). Briefly, a designed padlock probe is first circularized by a DNA ligase when it perfectly complements to a mutant gene. Then, the mutant gene functions as a primer to initiate branched rolling circle amplification reaction (BRCA), generating a large number of branched DNA strands and a lot of pyrophosphate molecules which is equivalent to the number of nucleotides consumed. With the addition of a terpyridine-Zn(II) complex, pyrophosphate molecules can be sensitively detected owing to the formation of a fluorescent terpyridine-Zn(II)-pyrophosphate complex. The fluorescence intensity is directly associated with the content of the mutant gene in a sample solution. On the other hand, the circulation of the padlock probe is prohibited when it hybridizes with the wild-type gene. In this assay, the accumulative nature of the BRCA process produces a detection limit of 0.1 pM and an excellent selectivity factor of 1000 toward SNP. As little as 0.1% mutant in the wild-type gene can be successfully detected. The simple procedure, high sensitivity, and high selectivity of this assay offer a potentially viable alternative for routine SNP analysis. Graphical abstract A simple and label-free fluorescence assay for SNP detection by coupling BRCA with selective fluorescence detection of pyrophosphate using the terpyridine-Zn(II) complex.

Ultrasensitive DNA detection based on target-triggered rolling circle amplification and fluorescent poly(thymine)-templated copper nanoparticles

We describe a novel strategy for the ultrasensitive detection of target DNA based on rolling circle amplification (RCA) coupled with fluorescent poly(thymine)-templated copper nanoparticles (poly T-CuNPs). In the presence of target DNA, a padlock DNA probe that consists of two regions: a target DNA-specific region and a poly(adenine) region, is circularized by the ligation reaction, and the subsequent RCA reaction is promoted to generate long, concatemeric, single-stranded DNA (ssDNA) with a lot of repetitive poly T sequences. As a result, a large number of poly T-CuNPs are formed, exhibiting a highly fluorescent signal. However, in the absence of target DNA or in the presence of non-specific target DNA, the padlock DNA probe is not circularized and the subsequent RCA is not executed, leading to no production of fluorescent poly T-CuNPs. With this simple strategy, we successfully analyzed the target DNA with the ultralow detection limit of 7.79 aM, a value that is 3 or 7 orders of magnitude lower than those of previous RCA-based fluorescent DNA detection strategies. In addition, the developed system was demonstrated to selectively discriminate non-specific target DNAs with one-base mismatch, suggesting potential application in the accurate diagnosis of single nucleotide polymorphisms or mutations.

Toehold Mediated One-Step Conformation-Switchable "Signal-On" Electrochemical DNA Sensing Enhanced with Homogeneous Enzymatic Amplification

The development of highly sensitive and sequence-specific electrochemical DNA (E-DNA) sensors, featuring flexible, one-step, and "signal-on" design, is a long-lasting goal. Here, we present a single-step, toehold-triggered structure-switchable signaling design that is "signal-on" and compatible with homogeneous enzyme-assisted target recycling (EATR). In this design, a partially hybridized duplex is bifunctional, which consists of a signal probe having foldable hairpin sequence and a target recognition probe with exposed toehold domain. In the presence of both target and exonuclease, the toehold sequence rapidly fuels the strand displacement reaction, liberating the surface-confined toehold-target duplex into homogeneous solution for target recycling and meanwhile leaving the dehybridized signal probe to form a stem-loop structure for signaling. Through such an 1:N enzymatic catalysis, more and more unfolded probes self-hybridize to their original folded configuration, giving a remarkable signal gain. This enzyme-assisted toehold E-DNA (etE-DNA) sensor achieves a satisfactory detection limit down to 42 fM, which is lower than that of the routine switchable E-DNA sensor by several orders of magnitude. In addition, the strategy shows high selectivity against a single-base mismatch and is capable of probing low abundant target DNA directly in human serum with minimal interference. By synergizing the toehold-based high selectivity, EATR, and one-step conformation-switchable signaling, this functional etE-DNA sensor appears to be a promising bioassay approach for clinical diagnostics.

Terahertz spectroscopy for the isothermal detection of bacterial DNA by magnetic bead-based rolling circle amplification

A terahertz biosensor based on rolling circle amplification was developed for the isothermal detection of bacterial DNA.

Protein self-assembly onto nanodots leads to formation of conductive bio-based hybrids

The next generation of nanowires that could advance the integration of functional nanosystems into synthetic applications from photocatalysis to optical devices need to demonstrate increased ability to promote electron transfer at their interfaces while ensuring optimum quantum confinement. Herein we used the biological recognition and the self-assembly properties of tubulin, a protein involved in building the filaments of cellular microtubules, to create stable, free standing and conductive sulfur-doped carbon nanodots-based conductive bio-hybrids. The physical and chemical properties (e.g., composition, morphology, diameter etc.) of such user-synthesized hybrids were investigated using atomic and spectroscopic techniques, while the electron transfer rate was estimated using peak currents formed during voltammetry scanning. Our results demonstrate the ability to create individually hybrid nanowires capable to reduce energy losses; such hybrids could possibly be used in the future for the advancement and implementation into nanometer-scale functional devices.

Self-primed isothermal amplification for genomic DNA detection of human papillomavirus

Rolling circle amplification (RCA) is an isothermal amplification technique with high efficiency and perfect accuracy for nucleic acids detection. However, RCA technique suffers the limitation to detect short DNA or RNA molecules. For long nucleic acid molecules, enzymatic restriction as well as heat denaturation process is usually required, which makes the amplification not effective and strictly isothermal. In this article, a simple and efficient one-pot self-primed isothermal amplification (SIA) was developed for detection of genomic DNA directly based on the combination of nicking endonuclease assisted strand displacement amplification (SDA) and exponential RCA. In virtue of numerous nicking sites on the genome, a pre-amplification of the whole genome was performed through SDA with the specific cleaving of nicking endonuclease. Meanwhile, the single strand DNA with HPV target sequence generated from SDA could hybrid with the circle probe as a primer and trigger the exponential RCA as a result of the existence of nicking endonuclease. As the reaction temperature and enzyme were the same, the amplification could be operated in one pot. The reaction solution after amplification was added on the electrode for hybridization with the sulfydryl probe to achieve the electrochemical signal. Based on the isothermal amplification, genotyping of HPV 11, 16, 18 and the detection of HPV 18 in Hela cell line were attempted with satisfied results. This approach should be a promising tool for pathogene detection in clinical diagnostics and research.

Rolling circle amplification as isothermal gene amplification in molecular diagnostics

Rolling circle amplification (RCA) developed in the mid-1990s has been widely used as an efficient isothermal DNA amplification process for molecular diagnosis. This enzymatic process amplifies target DNA sequences with high fidelity and specificity by using the strand displacing DNA polymerases. The product of RCA is long single-stranded DNA that contains tandem repeat of target sequence. Isothermal reaction amplification condition of RCA has an advantage over conventional polymerase chain reaction, because no temperature cycling devices are needed for RCA. Thus, RCA is suitable tool for point-of-care detection of target nucleic acids as well as facile detection of target genes. Combined with various detection methods, RCA could amplify and detect femtomolar scale of target nucleic acids with a specificity of one or two base discrimination. Herein, RCA technology is reviewed with an emphasis on molecular diagnosis of microRNAs, infectious pathogens, and point mutations.

A primerless molecular diagnostic: phosphorothioated-terminal hairpin formation and self-priming extension (PS-THSP)

There are various ways that priming can occur in nucleic acid amplification reactions. While most reactions rely on a primer to initiate amplification, a mechanism for DNA amplification has been developed in which hairpin sequences at the 3' terminus of a single-stranded oligonucleotide fold on themselves to initiate priming. Unfortunately, this method is less useful for diagnostic applications because the self-folding efficiency is low and only works over a narrow range of reaction temperatures. In order to adapt this strategy for analytical applications we have developed a variant that we term phosphorothioated-terminal hairpin formation and self-priming extension (PS-THSP). In PS-THSP a phosphorothioate (PS) modification is incorporated into the DNA backbone, leading to a reduction in the thermal stability of dsDNA and increased self-folding of terminal hairpins. By optimizing the number of PS linkages that are included in the initial template, we greatly increased self-folding efficiency and the range of reaction temperatures, ultimately achieving a detection limit of 1 pM. This improved method was readily adapted to the detection of single nucleotide polymorphisms and to the detection of non-nucleic acid analytes, such as alkaline phosphatase, which was quantitatively detected at a limit of 0.05 mU/mL, approximately 10-fold better than commercial assays. Graphical abstract Efficient self-folding by phosphorothioate (PS) modification.

Multiple detection of single nucleotide polymorphism by microarray-based resonance light scattering assay with enlarged gold nanoparticle probes

A gold nanoparticle enlargement assisted DNA microarray-based RLS assay has been developed for multiplexed detection of single nucleotide polymorphism with high sensitivity.

Isothermal Amplification of Nucleic Acids

Isothermal amplification of nucleic acids is a simple process that rapidly and efficiently accumulates nucleic acid sequences at constant temperature. Since the early 1990s, various isothermal amplification techniques have been developed as alternatives to polymerase chain reaction (PCR). These isothermal amplification methods have been used for biosensing targets such as DNA, RNA, cells, proteins, small molecules, and ions. The applications of these techniques for in situ or intracellular bioimaging and sequencing have been amply demonstrated. Amplicons produced by isothermal amplification methods have also been utilized to construct versatile nucleic acid nanomaterials for promising applications in biomedicine, bioimaging, and biosensing. The integration of isothermal amplification into microsystems or portable devices improves nucleic acid-based on-site assays and confers high sensitivity. Single-cell and single-molecule analyses have also been implemented based on integrated microfluidic systems. In this review, we provide a comprehensive overview of the isothermal amplification of nucleic acids encompassing work published in the past two decades. First, different isothermal amplification techniques are classified into three types based on reaction kinetics. Then, we summarize the applications of isothermal amplification in bioanalysis, diagnostics, nanotechnology, materials science, and device integration. Finally, several challenges and perspectives in the field are discussed.

Nano-enabled bioanalytical approaches to ultrasensitive detection of low abundance single nucleotide polymorphisms

A survey of the recent, significant developments on nanomaterials enabled ultrasensitive DNA and gene mutation assays is presented.

Single nucleotide polymorphisms (SNPs) constitute the most common types of genetic variations in the human genome. A number of SNPs have been linked to the development of life threatening diseases including cancer, cardiovascular diseases and neurodegenerative diseases. The ability for ultrasensitive and accurate detection of low abundant disease-related SNPs in bodily fluids (e.g. blood, serum, etc.) holds a significant value in the development of non-invasive future biodiagnostic tools. Over the past two decades, nanomaterials have been utilized in a myriad of biosensing applications due to their ability of detecting extremely low quantities of biologically important biomarkers with high sensitivity and accuracy. Of particular interest is the application of such technologies in the detection of SNPs. The use of various nanomaterials, coupled with different powerful signal amplification strategies, has paved the way for a new generation of ultrasensitive SNP biodiagnostic assays. Over the past few years, several ultrasensitive SNP biosensors capable of detecting specific targets down to the ultra-low regimes (ca. aM and below) and therefore holding great promises for early clinical diagnosis of diseases have been developed. This mini review will highlight some of the most recent, significant advances in nanomaterial-based ultrasensitive SNP sensing technologies capable of detecting specific targets on the attomolar (10^–18 M) regime or below. In particular, the design of novel, powerful signal amplification strategies that hold the key to the ultrasensitivity is highlighted.

Development of rolling circle amplification based surface-enhanced Raman spectroscopy method for 35S promoter gene detection

In this study, we developed the genetically modified organism detection method by using the combination of rolling circle amplification (RCA) and surface-enhanced Raman spectroscopy (SERS). An oligonucleotide probe which is specific for 35S DNA promoter target was immobilised onto the gold slide and a RCA reaction was performed. A self-assembled monolayer was formed on gold nanorods using 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB) and the second probe of the 35S DNA promoter target was immobilised on the activated gold coated slide surfaces. Probes on the nanoparticles were hybridised with the target oligonucleotide. Quantification of the target concentration was performed via SERS spectra of DTNB on the nanorods. SERS spectra of target molecules were enhanced through the RCA reaction and the detection limit was found to be 6.3fM. The sensitivity of the developed RCA-SERS method was compared with another method which had been performed without using RCA reaction, and the detection limit was found to be 0.1pM. The correlation between the target concentration and the SERS signal was found to be linear, within the range of 1pM to 10nM for the traditional assay and 100fM to 100nM for the RCA assay. For the developed RCA-SERS assay, the specificity tests were performed using the 35S promoter of Bt-176 maize gene. It was found out that the developed RCA-SERS sandwich assay method is quite sensitive, selective and specific for target sequences in model and real systems.

A novel electrochemical biosensor for DNA detection based on exonuclease III-assisted target recycling and rolling circle amplification

A strategy for electrochemical detection of DNA by exonuclease III-assisted DNA recycling and the rolling circle amplification was developed.

Lab in a tube: a fast-assembled colorimetric sensor for highly sensitive detection of oligonucleotides based on a hybridization chain reaction

Upon adding T_HBV, the self-assembly of T_HBV with H₁ allows the rest of the DNA sequence of H₁ to accelerate H₁–H₂ complex formation. The G-quadruplex at the end of the H₁–H₂ complex could catalyze TMB into a colored product.