A highly sensitive “turn-on” fluorescent probe with an aggregation-induced emission characteristic for quantitative detection of γ-globulin

Aggregation-Induced Emission Luminogen: Role in Biopsy for Precision Medicine

Biopsy, including tissue and liquid biopsy, offers comprehensive and real-time physiological and pathological information for disease detection, diagnosis, and monitoring. Fluorescent probes are frequently selected to obtain adequate information on pathological processes in a rapid and minimally invasive manner based on their advantages for biopsy. However, conventional fluorescent probes have been found to show aggregation-caused quenching (ACQ) properties, impeding greater progresses in this area. Since the discovery of aggregation-induced emission luminogen (AIEgen) have promoted rapid advancements in molecular bionanomaterials owing to their unique properties, including high quantum yield (QY) and signal-to-noise ratio (SNR), etc. This review seeks to present the latest advances in AIEgen-based biofluorescent probes for biopsy in real or artificial samples, and also the key properties of these AIE probes. This review is divided into: (i) tissue biopsy based on smart AIEgens, (ii) blood sample biopsy based on smart AIEgens, (iii) urine sample biopsy based on smart AIEgens, (iv) saliva sample biopsy based on smart AIEgens, (v) biopsy of other liquid samples based on smart AIEgens, and (vi) perspectives and conclusion. This review could provide additional guidance to motivate interest and bolster more innovative ideas for further exploring the applications of various smart AIEgens in precision medicine.

Self-Assembled Tetraphenylethene-Based Nanoaggregates with Tunable Electrochemiluminescence for the Ultrasensitive Detection of E. coli

As an effective ECL emitter, tetraphenylethene (TPE)-based molecules have recently been reported with aggregation-induced electrochemiluminescence (AIECL) property, while it is still a big challenge to control its aggregation states and obtain uniform aggregates with intense ECL emission. In this study, we develop three TPE derivatives carrying a pyridinium group, an alkyl chain, and a quaternary ammonium group via the Menschutkin reaction. The resulting molecules exhibit significantly red-shifted FL and enhanced ECL emissions due to the tunable reduction of the energy gap between the highest occupied molecular orbitals (HOMOs) and the lowest unoccupied molecular orbitals (LUMOs). More importantly, the amphiphilicity of the as-developed molecules enables their spontaneous self-assembly into well-controlled spherical nanoaggregates, and the ECL intensity of nanoaggregates with 3 -CH2- (named as C3) is 17.0-fold higher compared to that of the original 4-(4-(1,2,2-triphenylvinyl)phenyl)pyridine (TPP) molecule. These cationic nanoaggregates demonstrate a high affinity toward bacteria, and an ECL sensor for the profiling of Escherichia coli (E. coli) was developed with a broad linear range and good selectivity in the presence of an E. coli-specific aptamer. This study provides an effective way to enhance the ECL emission of TPE molecules through their derivatization and a simple way to prepare well-controlled AIECL nanoaggregates for ECL application.

1,3-diene-based AIEgens: Stereoselective synthesis and applications

In recent years, significant advancements have been made in the synthesis and application of 1,3-dienes. This specific structural motif has garnered significant attention from researchers in materials science and biology due to its unique aggregation-induced emission (AIE) properties and extensive conjugation systems. The luminescent characteristics of these compounds are notably influenced by the geometry of the two double bonds. Therefore, it is essential to consolidate stereoselective synthetic strategies for 1,3-dienes. This comprehensive review seeks to elucidate the diverse techniques employed to attain stereo-control in the synthesis of 1,3-diene-based AIE luminogens (AIEgens). Particular emphasis is placed on comprehending the determinants of stereoselectivity and exploring the array of substrates amenable to these methods. Furthermore, the review underscores the AIE properties exhibited by these compounds and their extensive utility in organic light-emitting diodes (OLEDs), stimuli-responsive materials, sensors, bioimaging, and photodynamic therapy (PDT).

Electrochemical biosensor based on cellulose nanofibers/graphene oxide and acetylcholinesterase for the detection of chlorpyrifos pesticide in water and fruit juice†

In this work, cellulose nanofibers and graphene oxide are used to fabricate a simple and reliable electrochemical biosensor, based on acetylcholinesterase (AChE) for the detection of highly dangerous organophosphates (OPs), utilizing chlorpyrifos as a representative sample. AChE is an enzyme that is essential for neurotransmission and catalyzes the conversion of acetylcholine (ATCh) into thiocholine and acetic acid. The pesticide used in this work, chlorpyrifos, inhibits the catalytic activity of AChE on ATCh, and this inhibition can be measured using square wave voltammetry (SWV). Utilizing a process of surface modification, layers of cellulose nanofibers, graphene oxide, a chitosan-graphene oxide composite, and acetylcholinesterase (AChE/CS-GO/GO/CNFs) were immobilized on a screen-printed carbon electrode (SPCE). The modified SPCE working electrode was characterized using scanning electron microscopy and graphene oxide trapped in the cellulose nanofibers was found to increase the sensitivity of the biosensor. The modified biosensor demonstrated good performance for detection of chlorpyrifos over a linear range of 25–1000 nM under optimum conditions, and the limits of detection and quantification were 2.2 nM and 73 nM, respectively. Our sophisticated technique might offer a more precise, straightforward, quick, and environmentally friendly way to assess chlorpyrifos contamination in water and juice samples.

Cellulose nanofibers and graphene oxide are used to fabricate an electrochemical biosensor based on acetylcholinesterase for detecting organophosphates. This biosensor is simple and reliable, and it utilizes chlorpyrifos as a representative sample of highly dangerous OPs.

Noninvasive detection and analysis of human globulin based on dynamic spectrum

Noninvasive detection of blood components is the most ideal and effective method to prevent and detect many clinical diseases. However, the accuracy of noninvasive detection based on the spectrum is not always satisfactory. The influence of various interferences in measurement limits the accuracy of the analysis. The dynamic spectrum theory can theoretically eliminate the individual differences and measurement environment influence and improve measurement accuracy. The concentration of globulin is closely related to the status of the immune system, which is of great significance for clinical diagnosis. This paper improves the signal-to-noise ratio from all links of dynamic spectrum data processing to realize the noninvasive detection of globulin. Through reasonable pretreatment, extraction, quality evaluation, and variable screening, the valid information of the spectrum gets maximum utilization. Finally, using the partial least squares prediction model to predict globulin concentration. The results show that the model established by dynamic spectrum treated by this method has a good predictive performance for globulin. The correlation coefficient of the prediction set is 0.962, the root-mean-square error of the prediction set is only 1.058 g/L, the correlation coefficient of the calibration set is 0.996, and the root-mean-square error of the calibration set is 0.332 g/L. The experimental results show that reasonable data processing of dynamic spectrum can effectively improve the signal-to-noise ratio of the data, make the established model have good prediction accuracy and performance, and realize the high-precision prediction globulin. This paper provides a complete research idea and method for the noninvasive detection of blood components. It is hopeful to realize the noninvasive quantitative detection of trace components in blood.

Mitochondria-targeted dual-channel colorimetric and fluorescence chemosensor for detection of Sn2+ ions in aqueous solution based on aggregation-induced emission and its bioimaging applications

Several fluorescence and colorimetric chemosensory for Sn²⁺ detection in an aqueous media have been reported, but applications remain limited for discriminative Sn²⁺ detection in live human cells and zebrafish larvae. Herein, a mitochondria-targeted Sn²⁺ "turn-on" colorimetric and fluorescence chemosensor, 2CTA, with an aggregation-induced emission (AIE) response was developed. The sensing of Sn²⁺ was enabled by a reduction-enabled binding pathway, with the conversion of -C˭O groups to -C-OH groups at the naphthoquinone moiety. The color changed from light maroon to milky white in a buffered aqueous solution. The chemosensor 2CTA possessed the excellent characteristics of good water solubility, fast response (less than 10 s), and high sensitivity (79 nM) and selectivity for Sn²⁺ over other metal ions, amino acids, and peptides. The proposed binding mechanism was experimentally verified by means of FT-IR and NMR studies. The chemosensor 2CTA was successfully employed to recognize Sn²⁺ in live human cells and in zebrafish larvae. In addition, a colocalization study proved that the chemosensor had the ability to target mitochondria and overlapped almost completely with MitoTracker Red. Furthermore, a bioimaging study of live cells demonstrated the discriminative detection of Sn²⁺ in human cancer cells and the practical applications of 2CTA in biological systems.

A new approach to developing diagnostics and therapeutics: Aggregation-induced emission-based fluorescence turn-on

Fluorescence imaging is a promising visualization tool and possesses the advantages of in situ response and facile operation; thus, it is widely exploited for bioassays. However, traditional fluorophores suffer from concentration limits because they are always quenched when they aggregate, which impedes applications, especially for trace analysis and real-time monitoring. Recently, novel molecules with aggregation-induced emission (AIE) characteristics were developed to solve the problems encountered when using traditional organic dyes, because these new molecules exhibit weak or even no fluorescence when they are in free movement states but emit intensely upon the restriction of intramolecular motions. Inspired by the excellent performances of AIE molecules, a substantial number of AIE-based probes have been designed, synthesized, and applied to various fields to fulfill diverse detection tasks. According to numerous experiments, AIE probes are more practical than traditional fluorescent probes, especially when used in bioassays. To bridge bioimaging and materials engineering, this review provides a comprehensive understanding of the development of AIE bioprobes. It begins with a summary of mechanisms of the AIE phenomenon. Then, the strategies to realize accurate detection using AIE probes are discussed. In addition, typical examples of AIE-active materials applied in diagnosis, treatment, and nanocarrier tracking are presented. In addition, some challenges are put forward to inspire more ideas in the promising field of AIE-active materials.

A Freezing-Induced Turn-On Imaging Modality for Real-Time Monitoring of Cancer Cells in Cryosurgery

Cryosurgery has attracted much attention for the treatment of tumors owing to its clear advantages. However, determining the volume of frozen tissues in real-time remains a challenge, which greatly lowers the therapeutic efficacy of cryosurgery and hinders its broad application for the treatment of cancers. Herein, we report a freezing-induced turn-on strategy for the selective real-time imaging of frozen cancer cells. As a type of aggregation-induced emission (AIE) fluorogen, TABD-Py molecules interact specifically with ice crystals and form aggregates at the ice/water interface. Consequently, bright fluorescent emission appears upon freezing. TABD-Py molecules are enriched mostly in the cancer cells and exhibit high biocompatibility as well as low cytotoxicity; therefore, a freezing-induced turn-on imaging modality for cryosurgery is developed, which will certainly maximize the therapeutic efficacy of cryosurgery in treating tumors.

A turn-on fluorescence probe based on aggregation-induced emission for leucine aminopeptidase in living cells and tumor tissue

Abnormally-expressed leucine aminopeptidase (LAP) is associated with diverse physiological and pathological disorders; hence developing a highly selective and sensitive detection system for LAP is of great significance. Herein, a fluorescent light-up system with aggregation-induced emission (AIE) characteristic, (DPA-TPE-Leu) has been developed for detecting LAP, in which the recognition unit l-leucine amide group also acts as the hydrophilic moiety. Upon LAP-triggered enzymatic reaction, l-leucine amide moiety is cleaved from the probe molecule, resulting in the formation and aggregation of the hydrophobic reaction product (DPE-TPE-OH) with AIE effect and thus giving out the turn-on green fluorescence. The system features excellent photostability, large Stokes shift (194 nm), good water solubility, high sensitivity with the detection limit of 0.16 U L-1, favorable specificity and low cytotoxicity. It has been effectively utilized in fluorescent imaging of endogenous LAP in living cells, and also successfully applied for fluorescent imaging of HepG2 xenograft tumor. Such a fluorescent assay could provide a convenient and sensitive method for detecting LAP activity and might aid in the auxiliary diagnosis of hepatocellular carcinoma and related pathological analysis in biopsy.

Application of a Novel "Turn-on" Fluorescent Material to the Detection of Aluminum Ion in Blood Serum

A novel "turn-on" fluorescent bioprobe, 1,2,3,4,5-penta(4-carboxyphenyl)pyrrole sodium salt (PPPNa), with aggregation-enhanced emission characteristics was synthesized for the in situ quantitative detection of Al³⁺ in serum. It exhibited a high selectivity to Al³⁺ in both simulated serum and fetal calf serum with no interferences from other metal ions or serum components observed and no isolation required. A weak interaction between PPPNa and serum albumin was found, which caused no interference, but enhanced fluorescence response of PPPNa to Al³⁺ and improved detection sensitivity. The limit of detection was determined to be 1.50 μmol/L Al³⁺ in phosphate-buffered saline solution containing 33 μg/mL bovine serum albumin (BSA) and decreased to 0.98 μmol/L as BSA concentration increased to 100 μg/mL. The fluorescence "turn-on" mechanism of the PPPNa probe to detect Al³⁺ was proposed. A bidentate complex is formed between the carboxy group of PPPNa and Al³⁺, causing the photoluminescence (PL) emission enhancement by aggregation. BSA chains further strengthen the stacking compactness of the aggregates of PPPNa and Al³⁺ and consequently enhance the PL emission of PPPNa by further promoting the restriction of intramolecular rotation of the phenyl ring. Its application to the in situ Al³⁺ was successfully demonstrated with HeLa cells and NIH 3T3 cells. The low cytotoxicity and highly selective response of PPPNa to Al³⁺ endow its great potentials to in vivo detecting and imaging of Al³⁺ as well as an absorbent of Al³⁺.

Fine Tuning of Emission Behavior, Self-Assembly, Anion Sensing, and Mitochondria Targeting of Pyridinium-Functionalized Tetraphenylethene by Alkyl Chain Engineering

Compared to the many studies that focus on the development of novel molecular frameworks pertaining to functionalized fluorescent materials, there is lesser emphasis on side chains even though they have a significant impact on the properties and applications of fluorescent materials. In this study, a series of pyridinium-functionalized tetraphenylethene salts (TPEPy-1 to TPEPy-4) possessing different alkyl chains are synthesized, and the influence of chain length on their optical performance and applications is thoroughly investigated. By changing the alkyl chain, the fluorogens exhibit opposite emission behavior in aqueous media because of their distinct hydrophobic nature, and their solid-state emission can be fine-tuned from green to red owing to their distinct molecular configuration. In addition, by increasing the chain length, the microstructure of the self-assembled fluorogens converts from microplates to microrods with various emission colors. Moreover, TPEPy-1 exhibits dual-mode fluorescence "turn-on" response toward NO₃^- and ClO₄^- in aqueous media because the anions induce the self-assembly of fluorogens. Furthermore, the fluorogens display cellular uptake selectivity while the proper alkyl chain impels the fluorogens to penetrate the cell membrane and accumulate in the mitochondria with high specificity.

A simple design of fluorescent probes for indirect detection of β-lactamase based on AIE and ESIPT processes

A fluorescent probe with both AIE and ESIPT characteristics has been developed for β-lactamase based on an indirect approach.

Fluorescent Sensors Based on Aggregation-Induced Emission: Recent Advances and Perspectives

Fluorescent sensors with advantages of excellent sensitivity, rapid response, and easy operation are emerging as powerful tools in environmental monitoring, biological research, and disease diagnosis. However, conventional fluorophores featured with π-planar structures usually suffer from serious self-quenching in the aggregated state, poor photostability, and small Stokes' shift. In contrast to conventional aggregation-caused quenching (ACQ) fluorophores, the newly emerged aggregation-induced emission fluorogens (AIEgens) are featured with high emission efficiency in the aggregated state, which provide unique opportunities for various sensing applications with advantages of high signal-to-noise ratio, strong photostability, and large Stokes' shift. In this review, we will first briefly give an introduction of the AIE concept and the turn-on sensing principles. Then, we will discuss the recent examples of AIE sensors according to types of analytes. Finally, we will give a perspective on the future developments of AIE sensors. We hope this review will inspire more endeavors to devote to this emerging world.