A novel non-invasive detection method for the FGFR3 gene mutation in maternal plasma for a fetal achondroplasia diagnosis based on signal amplification by hemin-MOFs/PtNPs

Duplex sequencing identifies unique characteristics of ENU-induced mutations in male mouse germ cells†

Germ cell mutagenicity testing is increasingly required for chemical risk assessment. Duplex sequencing is rapidly gaining acceptance as a method to assess in vivo mutagenesis, and as a valid alternative to transgenic rodent mutation models such as the MutaMouse. We used a duplex sequencing panel of 20 genomic targets and the transgenic rodent assay to measure mutations in the germ cells of MutaMouse males exposed to 0, 1, 2, or 5 mg/kg N-ethyl-N-nitrosourea for 28 days. Germ cells from the seminiferous tubules were collected 28 days post-exposure. The transgenic rodent assay showed a significant increase in mutant frequencies at the high (P < 0.001) and medium (P = 0.01) N-ethyl-N-nitrosourea doses relative to controls, while duplex sequencing revealed a significant increase (P < 0.001) in N-ethyl-N-nitrosourea-induced mutations only at the high dose. Duplex sequencing mutation frequencies were lower in genic than in intergenic targets, suggesting a protective role for transcription-coupled repair. Interestingly, we observed several unique germ cell characteristics with respect to duplex sequencing data from rodent somatic tissues: 1) larger inter-animal variability in clonally expanded mutations that affects the ability to detect significant increases in mutation frequency; 2) a target on chromosome 2 showing much higher susceptibility to spontaneous and chemical-induced mutagenesis than other targets; and 3) a mutation spectrum consistent with that observed in the offspring of N-ethyl-N-nitrosourea-treated males but not with the spectrum in bone marrow of directly-exposed males. These results suggest that duplex sequencing is a promising approach for characterizing germ cell mutagenesis and that mutagenic mechanisms operating in germ cells differ from those in somatic tissues.

Iron protoporphyrin IX-hyaluronan hydrogel-supported luminol chemiluminescence for the detection of nitric oxide in physiological solutions

Due to its role as a free radical signal-transducing agent with a short lifespan, precise measurement of nitric oxide (●NO) levels presents significant challenges. Various analytical techniques offer distinct advantages and disadvantages for ●NO detection. This research aims to simplify the detection process by developing a hydrogel system using iron(III)-protoporphyrin IX (hemin)-loaded hyaluronan for the detection of ●NO in solution. Various hydrogel formulations were created, and the effects of their components on hydrogel-supported luminol chemiluminescence (CL) kinetics, radical scavenging, and physicochemical properties were analysed through factorial analysis. The candidate formulations were then evaluated using two ●NO donors. An increase in the degree of crosslinking in unloaded formulations enhanced interactions with the CL reaction components, hydrogen peroxide (H2O2) and luminol, thereby affecting light generation. However, hemin loading negated these effects, resulting in more prominent luminescence kinetics in formulations with lower crosslinking degrees. Similarly, ●NO influenced the kinetics differently, interacting with both the CL reaction and hydrogel components. Hemin-loaded formulations exhibited enhanced signal propagation when exposed to ●NO, followed by H2O2 and luminol, whereas reversing the order of addition inhibited this propagation. The magnitude of these luminescence changes depended on the type and concentration of the ●NO donor, demonstrating greater sensitivity to ●NO levels compared to amperometric sensing. These findings suggest that the studied hydrogel platform has potential for the facile and accurate detection of ●NO in solution, requiring minimal sample sizes.

Rapid and ultra-sensitive lateral flow assay for pathogens based on multivalent aptamer and magnetic nanozyme

Ultra-sensitive LFA methods for pathogen detection commonly depended on tedious and time-consuming nucleic acid amplification. Here, a high affinity multivalent aptamer (multi-Apt) for S. aureus was obtained through exquisite engineering design. The scaffold and conformation of the multi-Apt were found to be key factors in the detection signal of aptsensors. After optimization, the binding affinity of the multi-Apt to S. aureus was improved by more than 8-fold from 135.9 nM to 16.77 nM. By the joint use of the multi-Apt and a multifunctional nanozyme Fe3O4@MOF@PtPd, a fast and ultra-sensitive LFA for S. aureus was developed (termed MA-MN LFA). In this method, a Fe3O4@MOF@PtPd nanozyme was modified with vancomycin and could efficiently capture and separate S. aureus. Moreover, the multi-Apt worked together with the nanozyme to bind with S. aureus to form a ternary complex at the same time, which simply the fabrication of LFA strip. The developed MA-MN LFA could detect S. aureus as low as 2 CFU/mL within 30 min and a wide linear range of 10-1 × 108 CFU/mL was obtained. The detection is easily operated, fast (can be completed within 30 min) and versatile for Gram-positive pathogens, thus has great potential as a powerful tool in pathogen detection.

A direct electrochemical sensor based on covalent organic frameworks/platinum nanoparticles for the detection of ofloxacin in water

A direct electrochemical sensor based on covalent organic frameworks (COFs)/platinum nanoparticles (PtNPs) composite was fabricated for the detection of ofloxacin (OFX) in water. Firstly, the COF material was synthesized via the condensation reaction of 1,3,5-tris(4-aminophenyl)benzene (TAPB) with terephthalaldehyde (TPA) and integrated with PtNPs by in situ reduction. Then, TAPB-TPA-COFs/PtNPs composite was loaded onto the surface of the glassy carbon electrode (GCE) by drip coating to construct the working electrode (TAPB-TPA-COFs/PtNPs/GCE). The electrochemical performance of TAPB-TPA-COFs/PtNPs/GCE showed a significant improvement compared with that of TAPB-TPA-COFs/GCE, leading to a 3.2-fold increase in the electrochemical signal for 0.01 mM OFX. Under optimal conditions, the TAPB-TPA-COFs/PtNPs/GCE exhibited a wide linear range of 9.901 × 10-3-1.406 µM and 2.024-15.19 µM with a detection limit of 2.184 × 10-3 µM. The TAPB-TPA-COFs/PtNPs/GCE-based electrochemical sensor with excellent performance provides great potential for the rapid and trace detection of residual OFX.

Signal-Amplified Nanobiosensors for Virus Detection Using Advanced Nanomaterials

Rapid diagnosis and treatment of infectious illnesses are crucial for clinical outcomes and public health. Biosensing developments enhance diagnostics at the point of care. This is superior to traditional procedures, which need centralized lab facilities, specialized personnel, and large equipment. The emerging coronavirus epidemic threatens global health and economic security. Increasing viral surveillance and regulatory actions against disease transmission necessitate rapid, sensitive testing tools for viruses. Due to their sensitivity and specificity, biosensors offer a possible reliable and quantifiable viral detection method. Current advances in genetic engineering, such as genetic alteration and material engineering, have provided several opportunities to enhance biosensors' sensitivity, selectivity, and recognition efficiency. This chapter explains biosensing techniques, biosensor varieties, and signal amplification technologies. Challenges and potential developments for viral microorganisms based on biosensors and signal amplification were also investigated.

How pain affect real life of children and adults with achondroplasia: A systematic review

The clinical features of achondroplasia can cause acute self-limited pain that can evolve into chronic pain. Pain causes a low quality of life, in terms of physical, emotional, social, and school functioning in both adult and children with achondroplasia. We conducted a systematic review according to the Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) statement to describe prevalence, assessment tools, causes and management strategies of pain in this rare disease. We found that shoulder and knee pain is typically referred during infancy, while knee pain is generally referred around 5-6 years of age. The prevalence of general pain in adolescence can be as high as 90%. Chronic pain in the achondroplasia population increases with age, with up to 70% of adults reporting general pain and back pain. Recognizing the multiple determinants of acute and chronic pain in patients with achondroplasia may enable physicians to better understand and manage this burden, particularly with the advent of new drugs that may modify some of the striking features of achondroplasia.

Selective detection of Pb2+ ions based on a graphene field-effect transistor gated by DNAzymes in binding mode

Heavy metal contamination has become a severe threat to dairy products through contaminated feed and the environment water. Among them, Pb(II) is highly toxic to the human body even under minimal exposure. Therefore, establishing a fast and sensitive Pb2+ detection technology is significant for rapid screening of vast number of dairy products. Hererin, we report the development of a sensitive and selective Pb(II) biosensor based on a solution-gated graphene transistor (SGGT) with the gate modified by Pb2+-dependent DNAzyme probes. It has also been explored that the DNAzymes working in simple binding mode integrate better with the SGGT than those working in normal catalytic mode, showing significantly stronger channel current responses and lower detection limit down to 0.39 μg/L (or 1.9 nM). Finally, the biosensor was practicably applied to the detection of lead ions in pure milk samples with a high recovery rate. We believe that this work reveals the best strategy for integrating metal ion dependent DNAzyme probes with SGGT sensing platforms to selectively and sensitively detect many metal ions.

Progress and opportunities for metal-organic framework composites in electrochemical sensors

Metal-organic framework composites have the advantages of large surface area, high porosity, strong catalytic efficiency and good stability, which provide a great possibility of finding excellent electrode materials for electrochemical sensors. However, MOF composites still face various challenges and difficulties, which limit their development and application. This paper reviews the application of MOF composites in electrochemical sensors, including MOF/carbon composites, MOF/metal nanoparticle composites, MOF/metal oxide composites and MOF/enzyme composites. In addition, the application challenges of MOF composites in electrochemical sensors are summarized. Finally, the application prospect for MOF composites is considered to promote the synthesis of more MOF composites with excellent properties.

Electrochemical immunosensor nanoarchitectonics with the Ag-rGO nanocomposites for the detection of receptor-binding domain of SARS-CoV-2 spike protein

As the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) poses a grave threat to human life and health, it is essential to develop an efficient and sensitive detection method to identify infected individuals. This study described an electrode platform immunosensor to detect SARS-CoV-2-specific spike receptor-binding domain (RBD) protein based on a bare gold electrode modified with Ag-rGO nanocomposites and the biotin-streptavidin interaction system. The Ag-rGO nanocomposites was obtained by chemical synthesis and characterized by electrochemistry and scanning electron microscope (SEM). Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to record the electrochemical signals in the electrode modification. The differential pulse voltammetry (DPV) results showed that the limit of detection (LOD) of the immunosensor was 7.2 fg mL^-1 and the linear dynamic detection range was 0.015 ~ 158.5 pg mL^-1. Furthermore, this sensitive immunosensor accurately detected RBD in artificial saliva with favorable stability, specificity, and reproducibility, indicating that it has the potential to be used as a practical method for the detection of SARS-CoV-2.

Recent Progress in Aptamer-Functionalized Metal-Organic Frameworks-Based Optical and Electrochemical Sensors for Detection of Mycotoxins

Mycotoxin contamination in foodstuffs and agricultural products has posed a serious hazard to human health and raised international concern. The progress of cost-effective, facile, rapid and reliable analytical tools for mycotoxin determination is in urgent need. In this regard, the potential utility of metal-organic frameworks (MOFs) as a class of crystalline porous materials has sparked immense attention due to their large specific surface area, adjustable pore size, nanoscale framework structure and good chemical stability. The amalgamation of MOFs with high-affinity aptamers has resulted in the progress of advanced aptasensing methods for clinical and food/water safety diagnosis. Aptamers have many advantages over classical approaches as exceptional molecular recognition constituents for versatile bioassays tools. The excellent sensitivity and selectivity of the MOF-aptamer biocomposite nominate them as efficient lab-on-chip tools for portable, label-free, cost-effective and real-time screening of mycotoxins. Current breakthroughs in the concept, progress and biosensing applications of aptamer functionalized MOFs-derived electrochemical and optical sensors for mycotoxins have been discussed in this study. We first highlighted an overview part, which provides some insights into the functionalization mechanisms of MOFs with aptamers, offering a foundation to create MOFs-based aptasensors. Then, we discuss various strategies to design high-performance MOFs-based aptamer scaffolds, which serve as either signal nanoprobe carriers or signal nanoprobes and their applications. We perceived that applications of optical aptamers are in their infancy in comparison with electrochemical MOFs-derived aptasensors. Finally, current challenges and prospective trends of MOFs-aptamer sensors are discussed.

Design and Application of Electrochemical Sensors with Metal-Organic Frameworks as the Electrode Materials or Signal Tags

Metal-organic frameworks (MOFs) with fascinating chemical and physical properties have attracted immense interest from researchers regarding the construction of electrochemical sensors. In this work, we review the most recent advancements of MOF-based electrochemical sensors for the detection of electroactive small molecules and biological macromolecules (e.g., DNA, proteins, and enzymes). The types and functions of MOF-based nanomaterials in terms of the design of electrochemical sensors are also discussed. Furthermore, the limitations and challenges of MOF-based electrochemical sensing devices are explored. This work should be invaluable for the development of MOF-based advanced sensing platforms.

NIR-light-controlled G-quadruplex hydrogel for synergistically enhancing photodynamic therapy via sustained delivery of metformin and catalase-like activity in breast cancer

Severely hypoxic condition of tumour represents a notable obstacle against the efficiency of photodynamic therapy (PDT). While mitochondria targeted therapy by metformin has been considered as a promising strategy for reducing oxygen consumption in tumours, its low treatment sensitivity, short half-life and narrow absorption window in vivo remain the intractable challenges. In this report, 5′-guanosine monophosphate (5′GMP), indocyanine green (ICG), hemin and metformin, were combined to construct a smart G-quadruplex (G4) hydrogel named HMI@GEL for breast cancer (BC) treatment. Benefiting from the photothermal (PTT) effect of ICG, HMI@GEL exhibited excellent characteristics of NIR-light-triggered and persistent drug delivery to maintain high intratumoral concentration of metformin. Furthermore, drug loading concentration of metformin reached an amazing 300 ​mg ​mL⁻¹ in HMI@GEL. To our knowledge, it might be the highest loading efficiency in the reported literatures. With the combination of catalase-mimicking Hemin@mil88, metformin could inhibit tumour mitochondrial respiratory significantly, which sequentially permitted in situ efficient oxygen generation. Remarkable apoptosis and necrosis were achieved by the combination of PTT and synergistically enhanced PDT as well as the activated tumour immunotherapy. Collectively, the HMI@GEL in situ injectable platform showed a promising strategy for enhanced PDT by metformin, and opened new perspectives for treating BC versatilely.

•

A NIR-light-controlled G-quadruplex hydrogel HMI@GEL loading metformin was prepared for precision breast cancer therapy.

•

The extremely high drug loading capacity (300 ​mg ​mL⁻¹) and persistent delivery of metformin was realized for the first time.

•

The combination of catalase-mimicking Hemin@mil88 and metformin dual enhanced intracellular ROS generation.

•

The tumour immune microenvironment was dramatically reshaped by synthetic photodynamic/photothermal therapy.

An electrochemical sensor for sensitive detection of dopamine based on a COF/Pt/MWCNT-COOH nanocomposite

Herein, an electrochemical sensor was developed for sensitive detection of dopamine (DA) based on a novel COF-based nanocomposite named COF/Pt/MWCNT-COOH, which possesses large specific surface area, excellent electrical conductivity, and high catalytic activity, thus broadening the application of COFs in the electrochemical sensing area.

Recent advancements in metal-organic frameworks composites based electrochemical (bio)sensors

Metal-organic frameworks (MOFs) are a novel class of crystalline materials which find widespread applications in the field of microporous conductors, catalysis, separation, biomedical engineering, and electrochemical sensing. With a specific emphasis on the MOF composites for electrochemical sensor applications, this review summarizes the recent construction strategies on the development of conductive MOF composites (post-synthetic modification of MOFs, in situ synthesis of functional materials@MOFs composites, and incorporating electroactive ligands). The developed composites are revealed to have excellent electrochemical sensing activity better than their pristine forms. Notably, the applicable functionalized MOFs to electrochemical sensing/biosensing of various target species are discussed. Finally, we highlight the perspectives and challenges in the field of electrochemical sensors and biosensors for potential directions of future development.

Electroanalytical point-of-care detection of gold standard and emerging cardiac biomarkers for stratification and monitoring in intensive care medicine - a review

Determination of specific cardiac biomarkers (CBs) during the diagnosis and management of adverse cardiovascular events such as acute myocardial infarction (AMI) has become commonplace in emergency department (ED), cardiology and many other ward settings. Cardiac troponins (cTnT and cTnI) and natriuretic peptides (BNP and NT-pro-BNP) are the preferred biomarkers in clinical practice for the diagnostic workup of AMI, acute coronary syndrome (ACS) and other types of myocardial ischaemia and heart failure (HF), while the roles and possible clinical applications of several other potential biomarkers continue to be evaluated and are the subject of several comprehensive reviews. The requirement for rapid, repeated testing of a small number of CBs in ED and cardiology patients has led to the development of point-of-care (PoC) technology to circumvent the need for remote and lengthy testing procedures in the hospital pathology laboratories. Electroanalytical sensing platforms have the potential to meet these requirements. This review aims firstly to reflect on the potential benefits of rapid CB testing in critically ill patients, a very distinct cohort of patients with deranged baseline levels of CBs. We summarise their source and clinical relevance and are the first to report the required analytical ranges for such technology to be of value in this patient cohort. Secondly, we review the current electrochemical approaches, including its sub-variants such as photoelectrochemical and electrochemiluminescence, for the determination  of important CBs highlighting the various strategies used, namely the use of micro- and nanomaterials, to maximise the sensitivities and selectivities of such approaches. Finally, we consider the challenges that must be overcome to allow for the commercialisation of this technology and transition into intensive care medicine.

Nanostructures in non-invasive prenatal genetic screening

Prenatal screening is an important issue during pregnancy to ensure fetal and maternal health, as well as preventing the birth of a defective fetus and further problems such as extra costs for the family and society. The methods for the screening have progressed to non-invasive approaches over the recent years. Limitations of common standard screening tests, including invasive sampling, high risk of abortion and a big delay in result preparation have led to the introduction of new rapid and non-invasive approaches for screening. Non-invasive prenatal screening includes a wide range of procedures, including fetal cell-free DNA analysis, proteome, RNAs and other fetal biomarkers in maternal serum. These biomarkers require less invasive sampling than usual methods such as chorionic villus sampling, amniocentesis or cordocentesis. Advanced strategies including the development of nanobiosensors and the use of special nanoparticles have provided optimization and development of NIPS tests, which leads to more accurate, specific and sensitive screening tests, rapid and more reliable results and low cost, as well. This review discusses the specifications and limitations of current non-invasive prenatal screening tests and introduces a novel collection of detection methods reported studies on nanoparticles' aided detection. It can open a new prospect for further studies and effective investigations in prenatal screening field.

A Novel Fluorescence Nanobiosensor based on Modified Graphene Quantum dots-HTAB for Early Detection of Fetal Sexuality with Cell Free Fetal DNA

Recently, prenatal diagnosis with non-invasive insight is a progressive approach in clinical medicine to prevent the birth of infants with genetic abnormalities. Cell free fetal DNA (cffDNA) makes up approximately 3-6% of the bare DNA in the mother's bloodstream which is produced during pregnancy and can be used to detect fetal sex and disease in the early stages. SRY is a gene located on the chromosome Y which determines the sex of male infants. In this work, a new nanobiosensor based on the fluorescence property of r-GQD@HTAB (reduced graphene quantum dots modified with hexadecyl trimethyl ammonium bromide) was fabricated that can identify the SRY gene in cffDNA with high sensitivity and specificity. A detection limit of 0.082 nM and the linear response range of 0.16-1.5 nM was obtained for the method. It was able to discriminate the target sequence with high specificity from the non-target sequences. This biosensor includes a new graphene quantum dot modified with a surfactant, HTAB which leads to high fluorescence emission of it and then more precise differentiation between ssDNA and DsDNA in a solution. In conclusion, it provides a novel analytical tool for detection of small amount of DNA and fetal sex and genetic diseases in early stage with prenatal and noninvasive tests and applicable for clinical use.

Porphyrin-Based Metal-Organic Frameworks for Biomedical Applications

Porphyrins and porphyrin derivatives have been widely explored for various applications owing to their excellent photophysical and electrochemical properties. However, inherent shortcomings, such as instability and self-quenching under physiological conditions, limit their biomedical applications. In recent years, metal-organic frameworks (MOFs) have received increasing attention. The construction of porphyrin-based MOFs by introducing porphyrin molecules into MOFs or using porphyrins as organic linkers to form MOFs can combine the unique features of porphyrins and MOFs as well as overcome the limitations of porphyrins. This Review summarizes important synthesis strategies for porphyrin-based MOFs including porphyrin@MOFs, porphyrinic MOFs, and composite porphyrinic MOFs, and highlights recent achievements and progress in the development of porphyrin-based MOFs for biomedical applications in tumor therapy and biosensing. Finally, the challenges and prospects presented by this class of emerging materials for biomedical applications are discussed.

Novel impedimetric sensing strategy for detecting ochratoxin A based on NH2-MIL-101(Fe) metal-organic framework doped with cobalt phthalocyanine nanoparticles

Iron-based metal-organic framework, NH₂-MIL-101(Fe), was doped with different dosages of cobalt phthalocyanine nanoparticles (CoPc) to synthesize a series of NH₂-MIL-101(Fe)@CoPc nanocomposites. The NH₂-MIL-101(Fe)@CoPc nanocomposites were then employed to construct novel impedimetric aptasensors for the detection of ochratoxin A (OTA). Combining the intrinsic advantages of NH₂-MIL-101(Fe) (highly porous structure and excellently electrochemical activity) and CoPc (good physiochemical stability and strong bioaffinity), the NH₂-MIL-101(Fe)@CoPc nanocomposites show promising properties, which are beneficial for immobilizing OTA-targeted aptamer strands. Amongst, the developed impedimetric aptasensor based on NH₂-MIL-101(Fe)@CoPc_6:1, prepared using the mass ratio of NH₂-MIL-101(Fe):CoPc of 6:1, exhibits the best amplified electrochemical signal and highest sensitivity for detecting OTA. The detection limitation is 0.063 fg·mL^-1 within the OTA concentration of 0.0001-100 pg·mL^-1, accompanying with high selectivity, good reproducibility and stability, acceptable regenerability, and wide applicability in diverse real samples. Consequently, the proposed sensing strategy can be applied for detecting OTA to cope with food safety.

Recent Advances in the Design and Sensing Applications of Hemin/Coordination Polymer-Based Nanocomposites

The fabrication of biomimetic catalysts as substituents for enzymes is of critical interest in the field due to the problems associated with the extraction, purification, and storage of enzymes in sensing applications. Of these mimetics, hemin/coordination polymer-based nanocomposites, mainly hemin/metal-organic frameworks (MOF), have been developed for various biosensing applications because of the unique properties of each component, while trying to mimic the normal biological functions of heme within the protein milieu of enzymes. This critical review first discusses the different catalytic functions of heme in the body in the form of enzyme/protein structures. The properties of hemin dimerization are then elucidated with the supposed models of hemin oxidation. After that, the progress in the fabrication of hemin/MOF nanocomposites for the sensing of diverse biological molecules is discussed. Finally, the challenges in developing this type of composites are examined as well as possible proposals for future directions to enhance the sensing performance in this field further.

Multimodal/Multifunctional Nanomaterials in (Bio)electrochemistry: Now and in the Coming Decade

Multifunctional nanomaterials, defined as those able to achieve a combined effect or more than one function through their multiple functionalization or combination with other materials, are gaining increasing attention in the last years in many relevant fields, including cargo targeted delivery, tissue engineering, in vitro and/or in vivo diseases imaging and therapy, as well as in the development of electrochemical (bio)sensors and (bio)sensing strategies with improved performance. This review article aims to provide an updated overview of the important advances and future opportunities exhibited by electrochemical biosensing in connection to multifunctional nanomaterials. Accordingly, representative aspects of recent approaches involving metal, carbon, and silica-based multifunctional nanomaterials are selected and critically discussed, as they are the most widely used multifunctional nanomaterials imparting unique capabilities in (bio)electroanalysis. A brief overview of the main remaining challenges and future perspectives in the field is also provided.

A chemiluminescence assay for determination of lysozyme based on the use of magnetic alginate-aptamer composition and hemin@HKUST-1

Lysozyme aptamer-functionalized magnetic alginate hydrogel was prepared for separation and enrichment of lysozyme. Luminol-labeled aptamer was used as a signal tag, and the signal tag was adsorbed on magnetic carboxylated carbon nanotubes based on the π-interaction. When lysozyme was added, the aptamer specifically binds to the lysozyme, causing the signal tag to detach from the magnetic carboxylated carbon nanotubes. When the aptamer/lysozyme complex bound to the complementary single strand of aptamer on the hemin@HKUST-1, lysozyme was released. The released lysozyme can be recombined with the signal tag adsorbed on the magnetic carboxylated carbon nanotube, allowing more signal tag to be dispersed into the solution. Determination of lysozyme was achieved by releasing the luminol-labeled aptamer to generate a chemiluminescence signal at a wavelength of 425 nm. It was proved by experiments that the synthesized hemin@HKUST-1 had a strong catalytic effect on the luminol-NaOH-H₂O₂ system. The chemiluminescence signal was increased nearly 100 times. The complementary pairing allowed the luminol to be immobilized on the surface of hemin@HKUST-1. The generation and consumption of short-lived reactive oxygen species were concentrated on the surface of the MOFs, which improves the chemiluminescence efficiency. The introduction of hemin@HKUST-1 and DNA solved the defects of chemiluminescence analysis. The chemiluminescence assay was able to detect lysozyme with linear range of 1.05 × 10^-6 U∙mg^-1 (6.00 × 10^-13 mol∙L^-1)-1.25 × 10^-2 U∙mg^-1 (7.14 × 10^-9 mol∙L^-1); the detection limit was 3.50 × 10^-7 U∙mg^-1 (2.00 × 10^-13 mol∙L^-1) (R² = 0.99). The recovery of lysozyme in spiked saliva samples was 97.4-102.8%. Graphical abstract Schematic presentation of chemiluminescence assay. Lysozyme (Lys) was captured by aptamer-modified magnetic sodium alginate (M-Alg-Apt); Glycine (pH = 2) as eluent for Lys. Luminol-modified Apt (Apt-luminol) as signal tag; magnetic carbon nanotubes (MCNTs) as adsorption matrix; cDNA was complementary to Apt; hemin@HKUST-1 as catalyst.

A new QCM signal enhancement strategy based on streptavidin@metal-organic framework complex for miRNA detection

Sensitive and selective detection of miRNA is of great significance for the early diagnosis of human diseases, especially for cancers. Quartz crystal microbalance (QCM) is an effective tool for detecting biological molecules; however, the application of QCM for miRNA detection is still very limited. One of the great needs for QCM detection is to further improve the QCM signal. Herein, for the first time, we promote a new signal enhancement strategy for the detection of miRNA by QCM. First, a hairpin biotin-modified DNA was used as a probe DNA, which exposes the biotin site when interacting with target miRNA. Then, a streptavidin@metal-organic framework (SA@MOF) complex formed by electrostatic attractions between SA and a MOF was introduced into the QCM detection system. The SA@MOF complexes serve as both a signal amplifier and a specific recognition element via specific biotin-SA interactions. The strategy was applied to the detection of a colorectal cancer marker, miR-221, by using a stable Zr(IV)-MOF, UiO-66-NH₂. The detection linear range was 10 fM-1 nM, the detection limit was 6.9 fM, and the relative standard deviation (RSD) (n = 5) was lower than 10% in both simulated conditions and the real serum environment. Furthermore, the detection limit reached 0.79 aM when coupled with the isothermal exponential amplification reaction (EXPAR).

Prospective of nanoscale metal organic frameworks [NMOFs] for cancer therapy

Nano metal organic frameworks (NMOFs) belong to the group of nanoporous materials. Over the decades, the conducted researches explored the area for the potential applications of NMOFs in areas like biomedical, chemical engineering and materials science. Recently, NMOFs have been explored for their potential use in cancer diagnosis and therapeutics. The excellent physico-chemical features of NMOFs also make them a potential candiadate to facilitate drug design, delivery and storage against cancer cells. In this review, we have explored the characterstic features, synthesis methods, NMOFs based drug delivery, diagnosis and imaging in various cancer types. In addition to this, we have also pondered on the stability and toxicological concerns of NMOFs. Despite, a significant research has been done for the potential use of NMOFs in cancer diagonostic and therapeutics, more information regarding the stability, in-vivo clearance, toxicology, and pharmacokinetics is still needed to ehnace the use of NMOFs in cancer diagonostic and therapeutics.

Competitive electrochemical immunosensor for maduramicin detection by multiple signal amplification strategy via hemin@Fe-MIL-88NH2/AuPt

Maduramicin (MD) is a type of monoglycoside polyether ionophore antibiotic that can effectively treat coccidiosis and facilitate animal growth. However, its extensive and excessive use brings potential risk to human health. Herein, an electrochemical immunosensor based on indirect competitive format was fabricated for analysis of MD residue in eggs by a multiple signal amplification system. Initially, Au nanoparticles were deposited onto glassy carbon electrode surface to load the coating antigen MD-BSA and to improve conductivity. Then the signal amplification platform was constructed by encapsulating hemin into Fe-MIL-88 NH₂ metal-organic frameworks (hemin@MOFs), and then the obtained composites were decorated with AuPt nanoparticles. The synthesized hemin@MOFs/AuPt was not only used as a signal amplification mediator, but also utilized as a carrier for immobilization of horseradish peroxidase-conjugated affinipure goat anti-mouse antibody (Ab₂-HRP) and horseradish peroxidase (HRP). The constructed hemin@MOFs/AuPt-Ab₂-HRP bioconjugates could effectively amplify the current signal since hemin@MOFs, AuPt and HRP all exhibited high catalytic activity towards the hydrogen peroxide. Moreover, the established immunosensor showed high sensitivity and stability during the detection procedure. With the synergistic catalytic effect of hemin@MOFs, AuPt and HRP, a wide detection range of 0.1-50 ng mL^-1 and a low detection limit of 0.045 ng mL^-1 were achieved (S/N = 3), respectively. Ultimately, the developed method displayed excellent performance in practical applications, providing a promising probability to detect other veterinary drug residues to guarantee food safety.

Ultrasensitive electrochemical detection of Mycobacterium tuberculosis IS6110 fragment using gold nanoparticles decorated fullerene nanoparticles/nitrogen-doped graphene nanosheet as signal tags

Tuberculosis (TB), caused by Mycobacterium tuberculosis (MTB), remains the top fatal infection continuing to threat public health, and the present detection method for MTB is facing great challenges with the global TB burden. In response to this issue, a novel electrochemical DNA biosensor was developed for detecting the IS6110 fragment within MTB. For the first time, the nanohybrid of gold nanoparticles decorated fullerene nanoparticles/nitrogen-doped graphene nanosheet (Au-nano-C₆₀/NGS) directly served as a new signal tag to generate signal response without additional redox molecules and subsequently labeled with signal probes (SPs) to form tracer label to achieve signal amplification. Additionally, a biotin-avidin system was introduced to immobilize abundant capture probes (CPs), further improving the sensitivity of the proposed biosensor. After a typical sandwich hybridization, the proposed electrochemical DNA biosensor was incubated with tetraoctylammonium bromide (TOAB), which was used as a booster to induce the intrinsic redox activity of the tracer label, resulting in a discriminating current response. The proposed electrochemical DNA biosensor shows a broad linear range for MTB determination from 10 fM to 10 nM with a low limit of detection (LOD) of 3 fM. In addition, this proposed biosensor not only distinguishes mismatched DNA sequence, but also differentiates MTB from other pathogenic agents. More importantly, it has been preliminarily applied in clinical detection and displayed excellent ability to identify the PCR products of clinical samples. There is great potential for this developed method to be used in early diagnosis and monitor of TB.

Electrochemical detection of Salmonella using an invA genosensor on polypyrrole-reduced graphene oxide modified glassy carbon electrode and AuNPs-horseradish peroxidase-streptavidin as nanotag

A rapid and sensitive electrochemical biosensor was constructed to detect Salmonella using invA gene biosensor. The biosensing was based on polyrrole-reduced graphene oxide (PPy-rGO) nanocomposite modified glassy carbon electrode (GCE) and signal amplification with horseradish peroxidase-streptavidin biofunctionalized gold nanoparticles (AuNPs-HRP-SA). PPy-rGO was prepared at 60 °C by chemical reduction of PPy-functionalized graphene oxide (PPy-GO) that was synthesized by in situ polymerization at room temperature. The detection signal was amplified via enzymatic reduction of H₂O₂ in the presence of hydroquinone (HQ) using AuNPs-HRP-SA as nanotag. Under optimal conditions, the differential pulse voltametric (DPV) signal from the biosensor was linearly related to the logarithm of target invA gene concentrations from 1.0 × 10^-16 to 1.0 × 10^-10 M, and the limit of detection (LOD) was 4.7 × 10^-17 M. The biosensor can also detect Salmonella in the range of 9.6 to 9.6 × 10⁴ CFU mL^-1, with LOD of 8.07 CFU mL^-1. The biosensor showed good regeneration ability, acceptable selectivity, repeatability and stability, which bode well as an alternative method for Salmonella screening.

Achondroplasia: a comprehensive clinical review

Achondroplasia is the most common of the skeletal dysplasias that result in marked short stature (dwarfism). Although its clinical and radiologic phenotype has been described for more than 50 years, there is still a great deal to be learned about the medical issues that arise secondary to this diagnosis, the manner in which these are best diagnosed and addressed, and whether preventive strategies can ameliorate the problems that can compromise the health and well being of affected individuals. This review provides both an updated discussion of the care needs of those with achondroplasia and an exploration of the limits of evidence that is available regarding care recommendations, controversies that are currently present, and the many areas of ignorance that remain.

Fluorescent aptasensing of chlorpyrifos based on the assembly of cationic conjugated polymer-aggregated gold nanoparticles and luminescent metal–organic frameworks

A fluorescent aptasensor of chlorpyrifos based on terbium(iii) based on metal–organic frameworks and PDDA-aggregated-gold nanoparticles.

An Ultrasensitive Electrochemical DNA Biosensor Based on Carboxylated Multi-walled Carbon Nanotube/Molybdenum Disulfide Composites for KRAS Gene Detection

In this paper, an ultrasensitive electrochemical biosensor based on carboxylated multi-walled carbon nanotube/molybdenum disulfide composites (MWCNTs-COOH/MoS₂) for the detection of KRAS gene is described. An easy, low-cost method, named one-step hydrothermal, was used for the synthesize of MWCNTs-COOH/MoS₂ nanocomposites, and scanning electronic microscopy (SEM), high resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) were used for characterizing the prepared composites. Furthermore, cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were employed for an electrochemical performance study of this biosensor. Under optimal conditions, the detection limit of target DNA achieved down to 3 fM (S/N = 3) with high sensitivity; the linear range with the logarithm of the concentrations of target DNA varied from 1.0 × 10^-14 to 1.0 × 10^-7 M. Finally, the practicality of our proposed sensor was verified by a determination of the KRAS gene in human serum samples with good accuracy and high precision due to the excellent conductivity and large active surface area of the MWCNTs-COOH/MoS₂ nanocomposites. This proposed biosensor thus provides a practical method for the rapid and sensitive analysis of gene detection.

A label-free immunosensor for the detection of nuclear matrix protein-22 based on a chrysanthemum-like Co-MOFs/CuAu NWs nanocomposite

In this study, a new, simple, and label-free electrochemical immunosensor was presented for the detection of nuclear matrix protein-22 (NMP-22). In order to accurately monitor very small amounts of NMP-22, it was advantageous to use highly efficient nanomaterials as signals. For this reason, we synthesized a chrysanthemum-like nanocomposite (Co-MOFs/CuAu NWs), using Co-based metal-organic frameworks (Co-MOFs) as carriers and copper gold nanowires (CuAu NWs) wrapped around their surface, which was applied for modifying a glassy carbon electrode (GCE). The Co-MOFs/CuAu NWs possessed outstanding catalytic capabilities, which served as signal materials and simultaneously carried the anti-NMP-22 antibody (Ab). When different concentrations of the NMP-22 antigen (Ag) were specifically attached to the immunosensor, the current responses decreased by varying degrees. The designed biosensor used the principle to establish a linear regression equation and achieve an accurate quantification of NMP-22. After optimization, the NMP-22 sensor exhibited a good linear response over a concentration range from 0.1 pg mL^-1 to 1 ng mL^-1, with a lower detection limit of 33 fg mL^-1 (based on S/N = 3). The proposed biosensor demonstrated the advantages of ultra-sensitivity, high specificity and acceptable reproducibility, suggesting that the proposed strategy has the potential for the quantification of NMP-22 in human urine samples. Moreover, the novel nanocomposite Co-MOFs/CuAu NWs are promising materials for electrochemical sensors to detect other biomolecules.

Metal-Organic Frameworks for the Development of Biosensors: A Current Overview

This review focuses on the fabrication of biosensors using metal-organic frameworks (MOFs) as recognition and/or transducer elements. A brief introduction discussing the importance of the development of new biosensor schemes is presented, describing these coordination polymers, their properties, applications, and the main advantages and drawbacks for the final goal. The increasing number of publications regarding the characteristics of these materials and the new micro- and nanofabrication techniques allowing the preparation of more accurate, robust, and sensitive biosensors are also discussed. This work aims to offer a new perspective from the point of view of materials science compared to other reviews focusing on the transduction mechanism or the nature of the analyte. A few examples are discussed depending on the starting materials, the integration of the MOF as a part of the biosensor and, in a deep detail, the fabrication procedure.

A signal-decreased electrochemical immunosensor for the sensitive detection of LAG-3 protein based on a hollow nanobox-MOFs/AuPt alloy

In this work, hollow nanobox metal-organic framework (HNM) nanocomposites were synthesised and utilised for the first time in a signal decreased electrochemical immunosensor for the ultrasensitive quantitative determination of lymphocyte activation gene-3 (LAG-3) protein, which is a newly discovered biomarker. With the aid of signal materials, namely, SiO₂-tagged anti-LAG-3 antibody (SiO₂-Ab₂) and the biotin-streptavidin system, the sensor can achieve signal amplification. Encapsulation of tin dioxide-functionalised reduced graphene oxide (rGO-SnO₂) and gold and platinum alloys (AuPt alloys) onto the surface of hollow nanobox metal-organic frameworks (MOFs) was performed to prepare rGO-SnO₂/hollow nanobox-MOFs/AuPt alloys (rGO-SnO₂/HNMs/AuPt) as the matrix. SiO₂-Ab₂, which is used as the signal-decreased label, can be utilised to enhance the distinction of the electrochemical signal after the specific recognition between antibodies and antigens, owing to its large steric hindrance property. In this sensor, this proposed sandwich immunosensor can achieve a high sensitivity, especially in the presence of low concentrations of the LAG-3 protein. Under optimal conditions, this sandwich-designed immunosensor exhibited a sensitive detection of the LAG-3 protein from concentrations of 0.01 ng mL^-1 to 1 μg mL^-1, with a lower detection limit of 1.1 pg mL^-1 (based on 3σ). We proposed that this ultrasensitive biosensor can be utilised for the detection of the LAG-3 protein in early clinical tumour diagnosis.

Heterogeneous catalysis with encapsulated haem and other synthetic porphyrins: Harnessing the power of porphyrins for oxidation reactions

Encapsulated metalloporphyrins have been widely studied for their use as efficient heterogeneous catalysts, inspired by the known catalytic activity of porphyrins in haemoproteins. The oxidation of organic substrates by haemoproteins is one of the well-known roles of these proteins, in which the haem (ferriprotoporphyrin IX = FePPIX) cofactor is the centre of reactivity. While these porphyrins are highly efficient catalysts in the protein environment, once removed, they quickly lose their reactivity. It is for this reason that they have garnered much interest in the field of heterogeneous catalysis of oxidation reactions. This review details current research in the field, focusing on the application of encapsulated haem, and other synthetic metalloporphyrins, applied to oxidation reactions.