New immunoprobe: Dual-labeling ZIF-8 embellished with multifunctional bovine serum albumin lamella for electrochemical immunoassay of tumor marker

Recent advances and synergistic effect of bioactive zeolite imidazolate frameworks (ZIFs) for biosensing applications

The rapid developments in the field of zeolitic imidazolate frameworks (ZIFs) in recent years have created unparalleled opportunities for the development of unique bioactive ZIFs for a range of biosensor applications. Integrating bioactive molecules such as DNA, aptamers, and antibodies into ZIFs to create bioactive ZIF composites has attracted great interest. Bioactive ZIF composites have been developed that combine the multiple functions of bioactive molecules with the superior chemical and physical properties of ZIFs. This review thoroughly summarizes the ZIFs as well as the novel strategies for incorporating bioactive molecules into ZIFs. They are used in many different applications, especially in biosensors. Finally, biosensor applications of bioactive ZIFs were investigated in optical (fluorescence and colorimetric) and electrochemical (amperometric, conductometric, and impedance) fields. The surface of ZIFs makes it easier to immobilize bioactive molecules like DNA, enzymes, or antibodies, which in turn enables the construction of cutting-edge, futuristic biosensors.

Ultra-sensitive fluorescent biosensor for multiple bacteria detection based on CDs/QDs@ZIF-8 and microfluidic fluidized bed

An ultra-sensitive fluorescent biosensor based on CDs/QDs@ZIF-8 and microfluidic fluidized bed was developed for rapid and ultra-sensitive detection of multiple target bacteria. The zeolitic imidazolate frameworks (ZIF-8) act as the carrier to encapsulate three kinds of fluorescence signal molecules from the CDs/QDs@ZIF-8 signal amplification system. Besides, three kinds of target pathogenic bacteria were automatically, continuously, and circularly captured by the magnetic nanoparticles (MNPs) in the microfluidic fluidized bed. The neutral Na2EDTA solution was the first time reported to not only dissolve the ZIF-8 frameworks from the MNPs-bacteria-CDs/QDs@ZIF-8 sandwich complexes, but also release the CDs/QDs from sandwich complexes with no loss of fluorescence signal. Due to the advantages of signal amplification and automated sample pretreatment, the proposed fluorescent biosensor can simultaneously detect Escherichia coli O157:H7, Salmonella paratyphi A, and Salmonella paratyphi B as low as 101 CFU/mL within 1.5 h, respectively. The mean recovery in spiked milk samples can reach 99.18%, verifying the applicability of this biosensor in detecting multiple bacteria in real samples.

Electrochemical immunosensor based on hollow Pt@Cu2O as a signal label for dual-mode detection of procalcitonin

As a reliable biomarker to evaluate the severity of sepsis, sensitive and accurate detection of procalcitonin (PCT) is essential. In this study, a dual-mode electrochemical immunosensor based on Au/ZIF-8 as substrate and Pt@Cu2O as signal label was constructed for the detection of PCT. By loading Au nanoparticles onto rhombic dodecahedral ZIF-8, the substrate (Au/ZIF-8) has large specific surface area and can immobilize antibody (Ab1) by Au-N bonds. Meanwhile, hollow Pt@Cu2O nanocomposite with excellent peroxidase-like activity and electrocatalytic activity were synthesized as signal label. In the process of electrochemical testing, Pt@Cu2O catalyzed the reduction of hydrogen peroxide (H2O2) and further promotes the oxidation of hydroquinone (HQ) to achieve the synergistic amplification of electrochemical signals. The proposed immunosensor detected PCT by amperometric i-t and differential pulse voltammetry (DPV) tests with a good linear response and low limit of detection (i-t: 0.70 fg/mL and DPV: 0.40 fg/mL) in the range of 10 fg/mL∼100 ng/mL. The immunosensor exhibited excellent sensitivity and accuracy, indicating the potential application of this method for PCT detection.

Covalent organic framework-based immunosensor to detect plasma Latexin reveals novel biomarker for coronary artery diseases

It is a great challenge to develop an efficient and rapid method to detect of biomarkers of cardiovascular disease. In this research, a differential pulse voltammetry (DPV)-based ultrasensitive immunosensor for the detection of plasma Latexin (LXN) has been established. With the aim to increase the surface area of the bare glassy carbon electrode (GCE), multi-walled carbon nanotube-graphene oxide has been developed. Covalent organic frameworks (COFs) are dropped with gold nanoparticles (AuNPs), secondary antibody and thionine (Thi-Ab2-Au-COFs) act as the signal probe with high electronic conductivity. Under the ideal conditions, the immunosensor displayed a broad linear response range from 0.01 ng mL-1 to 100 ng mL-1, with a detection limit of 50 pg mL-1 (S/N = 3). The immunosensor also demonstrates outstanding sensitivity, repeatability, and stability. Finally, we utilized the designed immunosensor to detect plasma LXN in coronary artery disease (CAD) patients, and the data showed that plasma LXN was significantly increased in CAD patients with a good performance of ROCAUC (AUC 0.871, 95 % CI 0.725-1.0, p = 0.002), indicating plasma LXN is a potential biomarker of cardiovascular disease. This immunosensor is a promising strategy for screening CAD patients in clinical practice.

Faraday cage-type self-powered immunosensor based on hybrid enzymatic biofuel cell

Self-powered immunosensors (SPIs) based on enzymatic biofuel cell (EBFC) have low sensitivity and poor stability due to the high impedance of the immune sandwich and the vulnerability of enzymes to environmental factors. Here, we applied the Faraday cage-type sensing mode on a hybrid biofuel cell (HBFC)-based SPI for the first time, which exhibited high sensitivity and stability. Cytokeratin 19 fragment (CYFRA 21-1) was used as a model analyte. Au nanoparticle-reduced graphene oxide (Au-rGO) composite was used as the supporting matrix for immunoprobe immobilized with detection antibody and glucose dehydrogenase (GDH), also the builder for Faraday cage structure on the bioanode in the presence of antigen. After the combination of immunoprobe, antigen, and the antibody on the bioanode, the Faraday cage was constructed in case the AuNP-rGO was applied as a conductive cage for electron transfer from GDH to the bioanode without passing through the poorly conductive protein. With the assistance of the Faraday cage structure, the impedance of the bioanode decreased significantly from 4000 to 300 Ω, representing a decline of over 90%. The sensitivity of the SPI, defined as the changes of open circuit voltage (OCV) per unit concentration of the CYFRA 21-1, was 68 mV [log (ng mL-1)]-1. In addition, Fe-N-C was used as an inorganic cathode material to replace enzyme for oxygen reduction reaction (ORR), which endowed the sensor with 4-week long-term stability. This work demonstrates a novel sensing platform with high sensitivity and stability, bringing the concept of hybrid biofuel cell-based self-powered sensor.

A high-performance electrochemical biosensor using an engineered urate oxidase

We constructed a high-performance biosensor for detecting uric acid by immobilizing an engineered urate oxidase on gold nanoparticles deposited on a carbon-glass electrode. This biosensor showed a low limit-of-detection (9.16 nM), a high sensitivity (14 μA/μM), a wide range of linearity (50 nM-1 mM), and more than 28 days lifetime.

Anti-Fouling Strategies of Electrochemical Sensors for Tumor Markers

The early detection and prognosis of cancers require sensitive and accurate detection methods; with developments in medicine, electrochemical biosensors have been developed that can meet these clinical needs. However, the composition of biological samples represented by serum is complex; when substances undergo non-specific adsorption to an electrode and cause fouling, the sensitivity and accuracy of the electrochemical sensor are affected. In order to reduce the effects of fouling on electrochemical sensors, a variety of anti-fouling materials and methods have been developed, and enormous progress has been made over the past few decades. Herein, the recent advances in anti-fouling materials and strategies for using electrochemical sensors for tumor markers are reviewed; we focus on new anti-fouling methods that separate the immunorecognition and signal readout platforms.

Dual-ratiometric aptasensor for simultaneous detection of malathion and profenofos based on hairpin tetrahedral DNA nanostructures

Due to the diversification and complexity of organophosphorus pesticide residues brings great challenges to the detection work. Therefore, we developed a dual-ratiometric electrochemical aptasensor that could detect malathion (MAL) and profenofos (PRO) simultaneously. In this study, metal ions, hairpin-tetrahedral DNA nanostructures (HP-TDN) and nanocomposites were used as signal tracers, sensing framework and signal amplification strategy respectively to develop the aptasensor. Thionine (Thi) labeled HP-TDN (HP-TDNThi) provided specific binding sites for assembling Pb2+ labeled MAL aptamer (Pb2+-APT1) and Cd2+ labeled PRO aptamer (Cd2+-APT2). When the target pesticides were present, Pb2+-APT1 and Cd2+-APT2 were dissociated from the hairpin complementary strand of HP-TDNThi, resulting in reduced oxidation currents of Pb²⁺ (I_Pb²⁺) and Cd²⁺ (I_Cd²⁺), respectively, while the oxidation currents of Thi (I_Thi) remained unchanged. Thus, I_Pb²⁺/I_Thi and I_Cd²⁺/I_Thi oxidation current ratios were used to quantify MAL and PRO, respectively. In addition, the gold nanoparticles (AuNPs) encapsulated in the zeolitic imidazolate framework (ZIF-8) nanocomposites (Au@ZIF-8) greatly increased the catch of HP-TDN, thereby amplifying the detection signal. The rigid three-dimensional structure of HP-TDN could reduce the steric hindrance effect on the electrode surface, which could greatly improve the recognition efficiency of the aptasensor for the pesticide. Under the optimal conditions, the detection limits of the HP-TDN aptasensor for MAL and PRO were 4.3 pg mL-1 and 13.3 pg mL-1, respectively. Our work proposed a new approach to fabricating a high-performance aptasensor for simultaneous detection of multiple organophosphorus pesticides, opening a new avenue for the development of simultaneous detection sensors in the field of food safety and environmental monitoring.

NIR-II fluorescent nanoprobe-labeled lateral flow biosensing platform: A high-performance point-of-care testing for carcinoembryonic antigen

Fluorescent lateral flow immunoassay (LFA) is one of the most common analytical platforms for point-of-care testing (POCT), which is capable of facile and early screening of biomarkers. Notably, fluorescent probes play a decisive role in analytical performances of LFA. Herein, we report a novel LFA based on the rare earth doped nanoparticles (RENPs) emitting in the second near-infrared (NIR-II) window for the detection of biomarkers, such as carcinoembryonic antigen (CEA). Benefiting from the dual fluorescent emission at NIR-II window, strong fluorescent penetration, low autofluorescence and excellent photostability of RENPs, this proposed NIR-II LFA displays a good linear relationship ranging from 1 to 320 ng mL^-1. The detection limit is as low as 0.37 ng mL^-1, which is of 13.5 times lower than the clinical cutoff value. Overall, NIR-II LFA biosensing platform based RENPs not only exhibits high sensitivity, accuracy and specificity, but also have characteristics of rapidity, simplicity and low cost. It holds high potential for early diagnosis of tumor biomarkers in POCT.

Application of zeolites and zeolitic imidazolate frameworks in the biosensor development

Biosensors are advanced devices for analysis of composition of blood, urine, environmental samples, and many other media. Their current development is tightly linked with nanomaterials, such as zeolites and zeolitic imidazolate framework (ZIFs). The present review describes electrochemical (amperometric, conductometric, ISFET) and optical (fluorescent and colorimetric) biosensors that incorporate zeolites and ZIFs in their biorecognition elements. The biosensors are based on immobilized enzymes (such as glucose oxidase, urease, and acetylcholinesterase), antibodies, DNA, and aptamers. The review present reasons for application of these nanomaterials, and discusses advantages of zeolite- and ZIF-containing biosensors over other biosensors. In most cases, the biosensors have improved sensitivity, better limit of detection, wider linear range, and other improved characteristics. It is demonstrated that immobilization of biomolecules such as enzymes or antibodies on the surface of zeolites and ZIFs enables creation of unique advanced biosensors that have a potential for further development and practical applications.

Design and Application of Electrochemical Sensors with Metal-Organic Frameworks as the Electrode Materials or Signal Tags

Metal-organic frameworks (MOFs) with fascinating chemical and physical properties have attracted immense interest from researchers regarding the construction of electrochemical sensors. In this work, we review the most recent advancements of MOF-based electrochemical sensors for the detection of electroactive small molecules and biological macromolecules (e.g., DNA, proteins, and enzymes). The types and functions of MOF-based nanomaterials in terms of the design of electrochemical sensors are also discussed. Furthermore, the limitations and challenges of MOF-based electrochemical sensing devices are explored. This work should be invaluable for the development of MOF-based advanced sensing platforms.

Recent Advances on the Metal-Organic Frameworks-Based Biosensing Methods for Cancer Biomarkers Detection

Sensitive and selective detection of cancer biomarkers is crucial for early diagnosis and treatment of cancer, one of the most dangerous diseases in the world. Metal-organic frameworks (MOFs), a class of hybrid porous materials fabricated through the assembly of metal ions/clusters and organic ligands, have attracted increasing attention in the sensing of cancer biomarkers, due to the advantages of adjustable size, high porosity, large surface area and ease of modification. MOFs have been utilized to not only fabricate active sensing interfaces but also arouse a variety of measurable signals. Several representative analytical technologies have been applied in MOF-based biosensing strategies to ensure high detection sensitivity toward cancer biomarkers, such as fluorescence, electrochemistry, electrochemiluminescence, photochemistry and colorimetric methods. In this review, we summarized recent advances on MOFs-based biosensing strategies for the detection of cancer biomarkers in recent three years based on the categories of metal nodes, and aimed to provide valuable references for the development of innovative biosensing platform for the purpose of clinical diagnosis.

CuS@BSA-NB2 Nanoparticles for HER2-Targeted Photothermal Therapy

Breast cancer is characterized by the uncontrolled proliferation of breast epithelial cells under the action of a variety of carcinogens. Although HER2-inhibitors were currently applied for HER2-positive breast cancer patients, they didn't work for patients with resistance to HER2-targeted anti-cancer drugs. In this work, we prepared novel CuS@BSA-NB2 nanoparticles (NPs) for breast cancer photothermal therapy (PTT). The NPs had good biocompatibility due to the Bovine Serum Albumin (BSA) encapsulating and excellent targeting to HER2 because of nanobody 2 (NB2). Under 808 nm laser irradiation, CuS@BSA-NB2 NPs had high photothermal conversion efficiency and photothermal stability. Meanwhile, we constructed a stable cell line of MDA-MB-231/HER2 with a high expression of HER2 protein. Immunofluorescence and ICP-MS assays showed that CuS@BSA-NB2 NPs can be specifically enriched and be ingested in MDA-MB-231/HER2 cells. Furthermore, CuS@BSA-NB2 NPs had shown a more significant photothermal treatment effect than CuS@BSA under certain treatment conditions for MDA-MB-231/HER2. In addition, the cytotoxicity assay demonstrated that CuS@BSA-NB2 NPs had a low toxicity for MDA-MB-231/HER2 cells. The above results suggested that CuS@BSA-NB2 NPs were great photothermal therapeutic agents to reduce the malignant proliferation of breast epithelial cells and have potential for breast cancer therapy.

Metal–organic framework-based biomimetic cascade bioreactor for highly efficient treatment of hyperuricemia with low side effects

We report on a metal–organic framework-based biomimetic cascade bioreactor for efficient treatment of hyperuricemia with low side effects.

Responsive-released strategy based on lead ions-dependent DNAzyme functionalized UIO-66-NH2 for tumor marker

Signal labeling on electrode interface is an important step during the construction of immunosensor and most signal substances are directly affixed on the immunoprobe or substrate so that some problems such as flimsy labeling method and interference of insulating proteins on electrode surface have been existed to affect their readout. In order to solve above problems in electrochemical immunoassay, a lead ions-decodable autocephalous signal integrator based on UIO-66-NH₂ was proposed for the detection of prostate specific antigen (PSA). Briefly, a lead ions-dependent DNAzyme functionalized UIO-66-NH₂, in which methylene blue was encapsulated, was independently dispersed in solution phase to be closely associated with the lead sulfide labeled sandwich bioconjugates, and internal methylene blue molecules can be sustained released once a cationic exchange reaction was occurred between lead sulfide label and adscititious silver ions. Based on this designing, immunoassay for PSA was effectively connected with the dynamic behavior of methylene blue molecules through the cleavage of DNAzyme on MOFs surface and performed a wide linear range from 1 pg mL^-1 to 10 ng mL^-1 and a satisfactory detection limit with 0.34 pg mL^-1. The proposed strategy was expected to offer more valuable information for the application of MOFs in early and accurate cancer diagnosis.

Proton-responsive annunciator based on i-motif DNA structure modified metal organic frameworks for ameliorative construction of electrochemical immunosensing interface

Reformative exploitation for metal organic frameworks (MOFs) has been a topic subject in electrochemical sensing, in which the loading of electroactive species is always introduced to enable them to generate electrochemical signal. However, insulation shielding of MOFs and flimsy combination method interfere with the signal readout of electroactive dyes when they are co-immobilized on electrode surface, indicating that an amelioration is imperatively proposed to solve these issues. Herein, a proton-activated annunciator for responsive release of methylene blue (MB) based on i-motif DNA structure modified UIO-66-NH₂ was presented to design electrochemical immunosensor (Squamous cell carcinoma antigen was used as the model analyte). With the catalysis of a ZIF-8 immunoprobe contained glucose oxidase (GOx) to glucose in test tube, protons are produced in ambient solution and then they can be used as the key to unlock the i-motif functionalized UIO-66-NH₂, releasing the loaded MB molecules to be readout on an improved electrode. This stimuli-responsive mode not merely eliminates the insulation effect of MOFs but also provides a firm loading method for electroactive dyes. Under the optimal conditions, the proposed immunoassay for SCCA had displayed excellent performance with a wide linear range from 1 µg mL^-1 to 1 pg mL^-1 and an ultralow detection limit of 1.504 fg mL^-1 (S/N = 3) under the optimal conditions.