Pd-Fe3O4 Janus nanozyme with rational design for ultrasensitive colorimetric detection of biothiols

MOF derivatization of multifunctional nanozyme: Peroxidase-like catalytic activity combined with magnetic solid phase extraction for colorimetric detection of Hg2

Nanozyme-based colorimetric sensing has drawn immense attention due to the rapid development of nanozyme in recent years. However, the selectivity of nanozyme-based colorimetric sensing greatly limits its subsequent practical application. It is well known that sample pretreatment can not only improve selectivity by eliminating the sample matrix interference, but also improve sensitivity by enriching trace targets. Based on the easy facile surface modification properties of nanozyme, we rationally designed nanozyme combined with sample pretreatment for colorimetric biosensing, through separation and enrichment, thereby improving the selectivity and sensitivity of the nanozyme colorimetric biosensing. As a proof of concept, the detection of Hg2+ by nanozyme-based colorimetric sensing was used as an example. Magnetic peroxidase-like nanozyme Fe3S4 was designed and synthesized. The selectivity is improved by the specific adsorption of S-Hg bond and the interference elimination after magnetic separation. In addition, the sensitivity is improved by magnetic solid-phase extraction enrichment. Our established colorimetric sensing based on Fe3S4 nanozyme integrated sample pretreatment with an enrichment factor of 100 and the limit of detection (LOD) is 26 nM. In addition, this strategy was successfully applied to detect Hg2+ in environmental water samples. Overall, the strategy showed good selectivity and sensitivity, providing a new practical method for the application of nanozyme-based biosensing in sample pretreatment.

Rational design of nanozyme with integrated sample pretreatment for colorimetric biosensing

Nanozymes have been widely used in the field of biosensing owing to their high stability, low cost, adjustable catalytic activity, and convenient modification. However, achieving high selectivity and sensitivity simultaneously in nanozyme-based colorimetric sensing remains a major challenge. Nanozymes are nanomaterials with enzyme-simulating activity that are often used as solid-phase adsorbents for sample pretreatment. Our design strategy integrated sample pretreatment function into the nanozyme through separation and enrichment, thereby improving the selectivity and sensitivity of nanozyme-based colorimetric biosensing. As a proof-of-concept, glucose was used as the model analyte in this study. A phenylboric acid-modified magnetic nanozyme (Cu/Fe3O4@BA) was rationally designed and synthesized. Selectivity was enhanced by boronate-affinity specific adsorption and the elimination of interference after magnetic separation. In addition, magnetic solid-phase extraction enrichment was used to improve the sensitivity. A recovery rate of more than 80% was reached when the enrichment factor was 50. The synthesized magnetic Cu/Fe3O4@BA was recyclable at least five times. The proposed method exhibited excellent selectivity and sensitivity, simple operation, and recyclability, providing a novel and practical strategy for designing multifunctional nanozymes for biosensing.

Fe-codoped carbon dots serving as a peroxidase mimic to generate in situ hydrogen peroxide for the visual detection of glucose

Nanozyme technology has gained significant regard and been successfully implemented in various applications including chemical sensing, bio-medicine, and environmental monitoring. Fe-CDs were synthesized and characterized well in this study. As compared to HRP (3.7 mM), the Fe-CDs exhibited a higher affinity towards H2O2 (0.2 mM) using the steady-state kinetic assay and stronger catalytic capability by changing the color of TMB to the blue color of the oxidized state, oxTMB. Additionally, an efficient peroxidase mimic, Fe-CDs/GOx, based on the hybrid cascade system to produce in situ H2O2 for the visual detection of glucose (color change: colorless to blue, and then to green), has been developed in detail, with limits of detection (LODs) for H2O2 and glucose of 0.33 μM and 1.17 μM, respectively. The changes further demonstrate a linear relationship between absorbance and H2O2 concentration, ranging from 10 to 60 μM, and for glucose (1 to 60 μM). To assess the accuracy and detection capability of the Fe-CDs/GOx system, we evaluated a real human serum sample obtained from adult males in a local hospital. In conclusion, Fe-CDs serving as a peroxidase mimic have the potential for various applications in the fields of biomedicine and nanozymes.

Synergistic action of cavity and catalytic sites in etched Pd-Cu2O octahedra to augment the peroxidase-like activity of Cu2O nanoparticles for the colorimetric detection of isoniazid and ascorbic acid

Despite the widespread use of nanozyme-based colorimetric assays in biosensing, challenges such as limited catalytic efficiency, inadequate sensitivity to analytes, and insufficient understanding of the structure-activity relationship still persist. Overcoming these hurdles by enhancing the inherent enzyme-like performance of nanozymes using the unique attributes of nanomaterials is still a significant obstacle. Here, we designed and constructed Pd-Cu2O nanocages (Pd-Cu2O NCs) by selectively etching the vertices of the copper octahedra to enhance the peroxidase-like (POD-like) activity of Cu2O nanoparticles. The improved catalytic activity of Pd-Cu2O NCs was attributed to their high specific surface area and abundant catalytic sites. Mechanistic studies revealed that reactive oxygen species (ROS) intermediates (•OH) were generated through the decomposition of H2O2, resulting in POD-like activity of the Pd-Cu2O NCs. The designed Pd-Cu2O NCs can oxidize 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H2O2, producing a blue oxidation product (oxTMB). The oxidation reaction was inhibited and led to a significant bleaching of the blue color in the presence of reducing substances isoniazid (INH) and ascorbic acid (AA). Based on these principles, we developed a colorimetric sensing platform for the detection of INH and AA, exhibiting good sensitivity and stability. This work provided a straightforward approach to the structural engineering of nanomaterials and the enhancement of enzyme-mimicking properties.

Bioinspired FeN5 Sites with Enhanced Peroxidase-like Activity Enable Colorimetric Sensing of Uranyl Ions in Seawater

Nanozymes with peroxidase (POD)-like activity have garnered significant attention due to their exceptional performance in colorimetric assays. However, nanozymes often possess oxidase (OD) and POD-like activity simultaneously, which affects the accuracy and sensitivity of the detection results. To address this issue, inspired by the catalytic pocket of natural POD, a single-atom nanozyme with FeN5 configuration is designed, exhibiting enhanced POD-like activity in comparison with a single-atom nanozyme with FeN4 configuration. The axial N atom in FeN5 highly mimics the amino acid residues in natural POD to optimize the electronic structure of the metal active center Fe, realizing the efficient activation of H2O2. In addition, in the presence of both H2O2 and O2, FeN5 enhances the activation of H2O2, effectively avoiding the interference of dissolved oxygen in colorimetric sensing. As a proof-of-concept application, a colorimetric detection platform for uranyl ions (UO22+) in seawater is successfully constructed, demonstrating satisfactory sensitivity and specificity.

Deciphering the Mechanisms of Photo-Enhanced Catalytic Activities in Plasmonic Pd-Au Heteromeric Nanozymes for Colorimetric Analysis

The growing demand for highly active nanozymes in various fields has led to the development of several strategies to enhance their activity. Plasmonic enhancement, a strategy used in heterogenous catalysis, represents a promising strategy to boost the activity of nanozymes. Herein, Pd-Au heteromeric nanoparticles (Pd-Au dimers) with well-defined heterointerfaces have been explored as plasmonic nanozymes. As a model system, the Pd-Au dimers with integrated peroxidase (POD)-like activity and plasmonic activity are used to investigate the effect of plasmons on enhancing the activity of nanozymes under visible light irradiation. Mechanistic studies revealed that the generation of hot electron-hole pairs plays a dominant role in plasmonic effect, and it greatly enhances the decomposition of H2 O2 to the reactive oxygen species (ROS) intermediates (•OH, •O2 - and 1 O2 ), leading to elevated POD-like activity of the Pd-Au dimers. Finally, the Pd-Au dimers are applied in the plasmon-enhanced colorimetric method for the detection of alkaline phosphatase, exhibiting broad linear range and low detection limit. This study not only provides a straightforward approach for regulating nanozyme activity through plasmonic heterostructures but also sheds light on the mechanism of plasmon-enhanced catalysis of nanozymes.

Ficin-copper hybrid nanoflowers with enhanced peroxidase-like activity for colorimetric detection of biothiols

The proteolytic enzyme ficin exhibits peroxidase-like activity but it is low and insufficient for real applications. Herein, we developed ficin-copper hybrid nanoflowers and demonstrated that they have significantly enhanced peroxidase-like activity of over 6-fold higher than that of free ficin, with one of the lowest Km and highest kcat values among all reported ficin-based peroxidase-like nanozymes. This was most likely caused by the synergistic catalysis of co-existing ficin and crystalline copper phosphate within nanoflower matrices having a large surface area. The nanoflowers were easily prepared by incubating ficin and copper sulfate at ambient temperature, causing coordination interactions between ficin's amine/amide moieties and copper ions, followed by concomitant anisotropic growth of petals composed of copper phosphate crystals with ficin. When compared to free ficin and natural horseradish peroxidase, the resulting nanoflowers' affinity toward H2O2 was greatly increased, yielding Km values of half and one-tenth, respectively, as well as noticeably improved stability. The nanoflowers were then applied to colorimetric determination of biological thiols (biothiols), such as cysteine (Cys), glutathione (GSH), and homocysteine (Hcy), based on their inhibition of nanoflowers' peroxidase-like activity, producing reduced color intensities as the concentration of biothiols increased. This strategy achieved highly sensitive colorimetric determinations of Cys, GSH, and Hcy after only 25-min incubation. Additionally, using this technique, biothiols in human serum were successfully determined with excellent precision, suggesting the potential application of this technology in clinical settings, particularly in point-of-care testing environments.

Functional Zonation Strategy of Heterodimer Nanozyme for Multiple Chemiluminescence Imaging Immunoassay

Although nanozymes with intrinsic enzyme-like characteristics have aroused great interest in the biosensing field, the challenge is to keep high enzyme-like activity of the nanozyme after the modification of biomolecules onto nanozymes. Herein, a functional zonation strategy of a heterodimer nanozyme was proposed to tackle the challenge and further construct a multiple chemiluminescence (CL) imaging immunoassay. Here Fe3O4-Au as a heterodimer nanozyme model was divided into two zones, in which Fe3O4 nanoparticles (NPs) were regarded as a nanozyme zone and AuNPs were defined as an antibody immobilization zone. A signal amplification probe (Fe3O4-Au-Ab2) was prepared by modifying the secondary antibody (Ab2) on AuNPs of the Fe3O4-Au heterodimer owing to the Au-S bond. The exposed Fe3O4 of the Fe3O4-Au-Ab2 probe shows very high peroxidase-like activity and can efficiently catalyze H2O2-luminol to produce strong CL imaging signals for multiple antigens detection. Using chicken interleukin-4 (ChIL-4) and chicken gamma interferon (ChIFN-γ) as models, the proposed CL imaging immunoassay shows wide linear ranges (0.005-0.10 ng/mL for both ChIL-4 and ChIFN-γ) and low detection limits (0.58 pg/mL for ChIL-4, 0.47 pg/mL for ChIFN-γ) with the characteristics of high sensitivity, high specificity, and good stability. This work provides a promising functional zonation concept for nanozymes to construct new types of nanozyme probes for immunoassay of multiple biomolecules.

Distinct dual enzyme-like activities of Fe-N-C single-atom nanozymes enable discriminative detection of cellular glutathione

Fe-N-C single-atom nanozymes readily achieved discriminative detection of glutathione (GSH) over other biothiols with similar structure due to the difference between POD-like and OXD-like activities regarding the kind of reactive oxygen species. This colorimetric sensor demonstrated the heterogeneity of GSH levels in different cells and accurately monitored cellular GSH fluctuation.

A biosensor based on Fe3O4@MXene-Au nanocomposites with high peroxidase-like activity for colorimetric and smartphone-based detection of glucose

A novel magnetic nanozyme Fe₃O₄@MXene-Au nanocomposite, which possessed higher peroxidase-like activity than that of Fe₃O₄ nanoparticles and Fe₃O₄@MXene nanocomposites, was developed. The outstanding magnetic properties of the nanozyme endowed it with the ability of simple and rapid separation, achieving great recyclability. Based on Fe₃O₄@MXene-Au nanocomposites and glucose oxidase (Glu Ox), a highly selective colorimetric biosensor for glucose detection was developed. Fe₃O₄@MXene-Au nanocomposites can catalyze H₂O₂ produced from glucose catalyzed by glucose oxidase to ·OH and oxidize colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidized TMB (oxTMB) with a significant absorbance at 652 nm. The linear range of glucose was 0-1.4 mM under optimal conditions, with a limit of detection (LOD) of 0.11 mM. Glucose in human whole blood was successfully detected with satisfactory recoveries. Furthermore, a facile agarose hydrogel detection platform was designed. With smartphone software, glucose detection can be realized by the agarose hydrogel platform, demonstrating the potential in on-site and visual detection of glucose.

Research Progress in Iron-Based Nanozymes: Catalytic Mechanisms, Classification, and Biomedical Applications

Natural enzymes are crucial in biological systems and widely used in biology and medicine, but their disadvantages, such as insufficient stability and high-cost, have limited their wide application. Since Fe₃O₄ nanoparticles were found to show peroxidase-like activity, researchers have designed and developed a growing number of nanozymes that mimic the activity of natural enzymes. Nanozymes can compensate for the defects of natural enzymes and show higher stability with lower cost. Iron, a nontoxic and low-cost transition metal, has been used to synthesize a variety of iron-based nanozymes with unique structural and physicochemical properties to obtain different enzymes mimicking catalytic properties. In this perspective, catalytic mechanisms, activity modulation, and their recent research progress in sensing, tumor therapy, and antibacterial and anti-inflammatory applications are systematically presented. The challenges and perspectives on the development of iron-based nanozymes are also analyzed and discussed.

Multifunctional Nanoprobe-Amplified Enzyme-Linked Immunosorbent Assay on Capillary: A Universal Platform for Simple, Rapid, and Ultrasensitive Dual-Mode Pathogen Detection

Although the traditional enzyme-linked immunosorbent assay (ELISA) has been widely applied in pathogen detection and clinical diagnostics, it always suffers from complex procedures, a long incubation time, unsatisfying sensitivity, and a single signal readout. Here, we developed a simple, rapid, and ultrasensitive platform for dual-mode pathogen detection based on a multifunctional nanoprobe integrated with a capillary ELISA (CLISA) platform. The novel capture antibodies-modified capillaries can act as a swab to combine in situ trace sampling and detection procedures, eliminating the dissociation between sampling and detection in traditional ELISA assays. With excellent photothermal and peroxidase-like activity, the Fe₃O₄@MoS₂ nanoprobe with a unique p-n heterojunction was chosen as an enzyme substitute and amplified signal tag to label the detection antibody for further sandwich immune sensing. As the analyte concentration increased, the Fe₃O₄@MoS₂ probe could generate dual-mode signals, including remarkable color changes from the chromogenic substrate oxidation as well as photothermal enhancement. Moreover, to avoid false negative results, the excellent magnetic capability of the Fe₃O₄@MoS₂ probe can be used to pre-enrich the trace analytes, amplifying the detection signal and enhancing the immunoassay's sensitivity. Under optimal conditions, specific and rapid detection of SARS-CoV-2 has been realized successfully based on this integrated nanoprobe-enhanced CLISA platform. The detection limits were 5.41 pg·mL^-1 for the photothermal assay and 150 pg·mL^-1 for the visual colorimetric assay. More importantly, the simple, affordable, and portable platform can also be expanded to rapidly detect other targets such as Staphylococcus aureus and Salmonella typhimurium in practical samples, making it a universal and attractive tool for multiple pathogen analysis and clinical testing in the post COVID-19 era.

Highly efficient carbon supported Co-Ir nanozyme for the determination of total antioxidant capacity in foods

Nanozyme-based colorimetric assays have aroused extensive attention in biosensing due to quick response, low cost and simplicity. However, their practical applications are limited by the unsatisfactory stability and catalytic activity of nanozymes in complex detection environments. Herein, using the one-pot chemical vapor deposition method, we successfully prepare a highly efficient and stable carbon supported Co-Ir nanozyme (termed as Co-Ir/C nanozyme) for the determination of total antioxidant capacity (TAC) in food samples. The Co-Ir/C nanozyme shows excellent durability under extensive pH ranges, high temperature and high salt concentration due to the protection of carbon supporter. It can be recycled by simple magnetic separation, and its catalytic activity remains stable after long-term operation and storage. Taking full advantage of the superior peroxidase-like activity of Co-Ir/C nanozyme, it is used for colorimetric detection of ascorbic acid (or known as vitamin C), an important vitamin to adjust body's normal physiological function, with results showing higher sensitivity (detection limit of 0.27 μM) than most of the recently published works. Moreover, the determination of TAC in vitamin C tablets and fruits are further achieved, which are in good agreement with those of commercial colorimetric test kits. This study helps guide the rational preparation of versatile and highly stable nanozymes, and develops a robust TAC determination platform for future food quality monitoring.

N-Doped Carbon Nanotubes Supported Fe-Mn Dual-Single-Atoms Nanozyme with Synergistically Enhanced Peroxidase Activity for Sensitive Colorimetric Detection of Acetylcholinesterase and Its Inhibitor

Monitoring acetylcholinesterase (AChE) and its inhibitors is of importance for early diagnosis and therapy of neurological diseases. Herein, N-doped carbon nanotubes supported Fe-Mn dual-single-atoms (FeMn DSAs/N-CNTs) were fabricated by a simple pyrolysis, as thoroughly figured out by a series of the characterization techniques. The peroxidase-like activity of FeMn DSAs/N-CNTs was investigated by catalytic oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to generate rich hydroxyl radicals (·OH) in the H₂O₂ system, which effectively catalyzed colorless TMB oxidation to blue oxidized TMB (ox-TMB). Besides, the peroxidase-like activity was greatly weakened by thiocholine (derived from AChE), accompanied by making blue ox-TMB fade. Impressively, the highly improved peroxidase-like property is further evidenced by density functional theory (DFT) calculations, where the dual-single atoms show a lower energy barrier (0.079 eV) and their interactions with the N-CNTs played critical roles for producing the oxygen radicals. By virtue of the nanozyme, a low-cost, specific, and sensitive colorimetric sensor was built for detection of AChE with a broader linear range of 0.1-30 U L^-1 and a lower limit of detection (LOD, 0.066 U L^-1), combined with its feasible analysis in human serum samples. Also, this platform was applied for measuring huperzine A inhibitor with a wide linear scope of 5-500 nM and a LOD down to 4.17 nM. This strategy provides a low-cost and convenient approach for early clinical diagnosis and drug development.

A Cascade Enzyme System Integrating Peroxidase Mimic with Catalase for Linear Range Expansion of H2 O2 Assay: A Mechanism and Application Study

Peroxidase (POD) Nanozyme-based hydrogen peroxide (H₂ O₂ ) detection is popular, but hardly adapt to high concentration of H₂ O₂ owing to narrow linear range (LR) and low LR maximum. Here, a solution of combining POD and catalase (CAT) is raised to expand the LR of H₂ O₂ assay via decomposing part of H₂ O₂ . As a proof of concept, a cascade enzyme system (rGRC) is constructed by integrating ruthenium nanoparticles (RuNPs), CAT and graphene together. The rGRC-based sensor does perform an expanded LR and higher LR maximum for H₂ O₂ detection. Meanwhile, it is confirmed that LR expansion is closely associated with apparent K_m of rGRC, which is determined by the relative enzyme activity between CAT and POD both in theory and in experiment. At last, rGRC is successfully used to detect high concentration of H₂ O₂ (up to 10 mm) in contact lens care solution, which performs higher assay accuracy (close to 100% recovery at 10 mm of H₂ O₂ ) than traditional POD nanozymes. This study brings up a kind of POD/CAT cascade enzyme system and provides a new concept for accurate and facile H₂ O₂ detection. Additionally, it replenishes a new enzyme-substrate model of achieving the same pattern with competitive inhibition in enzyme reactions.

Rational design of trimetallic AgPt-Fe3O4 nanozyme for catalyst poisoning-mediated CO colorimetric detection

Carbon monoxide (CO) is not only a highly poisonous gas that brings great health risk, but also a significant signaling molecule in body. However, it is still challengeable for development of alternative colorimetric probes to traditional organic chromophores for simple, sensitive and convenient CO sensing. Here, for the first time, we rationally design a novel hydrophilic AgPt-Fe₃O₄ nanozyme with a unique heterodimeric nanostructure for colorimetric sensing of CO based on the excellent peroxidase-like catalytic activity as well as highly poisonous effect of CO on the nanozyme's catalytic activity. Both experimental evidence and theoretical calculations reveal the trimetallic AgPt-Fe₃O₄ nanozyme is susceptible to poisoning with the strongest affinity towards CO compared to individual Fe₃O₄ or Ag-Fe₃O₄, which is attributed to the adequate exposure of the active metallic sites and efficient interfacial synergy of unique heterodimeric nanostructure. Accordingly, a novel nanozyme-based colorimetric strategy is developed for CO detection with a low detection limit of 5.6 ppb in solution. Furthermore, the probe can be prepared as very convenient test strips and integrated with the portable smartphone platforms for detecting CO gas samples with a low detection limit of 8.9 ppm. Overall, our work proposes guidelines for the rational design of metallic heterogeneous nanostructure to expand the analytical application of nanozyme.

Nanozyme-catalysed CRISPR-Cas12a system for the preamplification-free colorimetric detection of lead ion

CRISPR-based detection was often based on the target preamplification to realize the high sensitivity. Here, we prepared a CRISPR-Cas12a system for the colorimetric detection of lead ion (Pb²⁺) based on the assistance of DNAzyme and nanozyme instead of preamplification. The recognition between GR-5 DNAzyme and Pb²⁺ could trigger the CRISPR-Cas12a system. MnO₂ nanozymes connected with magnetic beads through single stranded DNA were prepared as the colorimetric signal probes and catalyst of CRISPR-Cas12a system for the strong oxidase-like activity inducing the color change of 3,3',5,5'-tetramethylbenzidine. The nanozyme-catalysed CRISPR-Cas12a system could be used to detect Pb²⁺ through the color change with high specificity and sensitivity. The linear range of this approach was 0.8 nM-2500 nM, with a limit of detection of 0.54 nM. This method was applied for the detection of the Pb²⁺ in food samples indicating good accuracy and anti-interference ability.

Highly sensitive and selective serotonin (5-HT) electrochemical sensor based on ultrafine Fe3O4 nanoparticles anchored on carbon spheres

Neurotransmitter serotonin (5-HT) is involved in various physiological and pathological processes. Therefore, its highly sensitive and selective detection in human serum is of great significance for early diagnosis of disease. In this work, employing iron phthalocyanine as Fe source, ultrafine Fe₃O₄ nanoparticles anchored on carbon spheres (Fe₃O₄/CSs) have been prepared, which exhibits an excellent electrochemical sensing performance toward 5-HT. With carbonecous spheres turned into conductive carbon spheres under the heat treatment in N₂ atmosphere, iron phthalocyanine absorbed on their surfaces are simultaneously pyrolysised and oxidized, and finally transformed into ultrafine Fe₃O₄ nanoparticles. Electrochemical results demonstrate a high sensitivity (5.503 μA μM^-1) and a low detection limit (4 nM) toward 5-HT for as-prepared Fe₃O₄/CSs. In combination with the morphology and physicochemical property of Fe₃O₄/CSs, the enhanced sensing mechanism toward 5-HT is disscussed. In addition, the developed electrochemical sensor also displays a good sensing stability and an anti-interferent ability. Further applied in real human serum samples, a satisfactory recovery rate is achieved. Promisingly, the developed electrochemical sensor can be employed for the determination of 5-HT in actual samples.

Recent advances in colorimetric sensors based on nanozymes with peroxidase-like activity

Nanozymes have been widely used to construct colorimetric sensors due to their advantages of cost-effectiveness, high stability, good biocompatibility, and ease of modification. The emergence of nanozymes greatly enhanced the detection sensitivity and stability of the colorimetric sensing platform. Recent significant research has focused on designing various sensors based on nanozymes with peroxidase-like activity for colorimetric analysis. However, with the deepening of research, nanozymes with peroxidase-like activity has also exposed some problems, such as weak affinity and low catalytic activity. In view of the above issues, existing investigations have shown that the catalytic properties of nanozymes can be improved by adding surface modification and changing the structure of nanomaterials. In this review, we summarize the recent trends and advances of colorimetric sensors based on several typical nanozymes with peroxidase-like activities, including noble metals, metal oxides, metal sulfides/metal selenides, and carbon and metal-organic frameworks (MOF). Finally, the current challenges and prospects of colorimetric sensors based on nanozymes with peroxidase-like activity are summarized and discussed to provide a reference for researchers in related fields.

A High Catalytic Activity Nanozyme Based on Cobalt-Doped Carbon Dots for Biosensor and Anticancer Cell Effect

Nanozyme technology as an emerging field has been successfully applied to chemical sensing, biomedicine, and environmental monitoring. It is very significant for the advance of this field to construct nanozymes with high catalytic activity by a simple method and to develop their multifunctional applications. Here, a new type of cobalt-doped carbon dots (Co-CDs) nanozymes was designed using vitamin B₁₂ and citric acid as the precursors. The homogeneous cobalt doping at carbon nuclear led the Co-CDs to show significant peroxidase-like activity resembling natural metalloenzymes. Based on the high affinity of Co-CDs to H₂O₂ (K_m = 0.0598 mM), a colorimetric sensor for glucose detection was constructed by combining Co-CDs with glucose oxidase. On account of the high catalytic activity of nanozymes and the cascade strategy, a good linear relationship was obtained from 0.500 to 200 μM, with a detection limit of 0.145 μM. The biosensor has realized the accurate detection of glucose in human serum samples. Moreover, Co-CDs could specifically catalyze H₂O₂ in cancer cells to generate a variety of reactive oxygen species, leading to the death of cancer cells, which has useful application potential in tumor catalytic therapy. In this work, the catalytic activity of Co-CDs has been adequately exploited, which extends the application of carbon dots in multiple biotechnologies, including biosensing, disease diagnosis, and treatment.

Covalent organic framework-loaded silver nanoparticles as robust mimetic oxidase for highly sensitive and selective colorimetric detection of mercury in blood

Covalent organic frameworks (COFs) were fabricated with a hierarchical flower-like hollow structure, possessing a large specific surface area, high porosity, and excellent environmental stability. In situ growth of noble silver nanoparticles (AgNPs) onto COFs was conducted yielding COF-Ag nanozymes. The structural advantages of COFs can ensure the uniform dispersion and effective size control of AgNPs. More interestingly, the oxidase-like catalytic activity of the obtained COF-Ag nanozymes could be enhanced in the presence of Hg²⁺ ions, which could specifically interact with AgNPs to form Ag-Hg alloys. A COF-Ag catalysis-based colorimetric platform was thereby constructed for highly selective and sensitive analysis of Hg²⁺ ions, showing a linear concentration range from 0.050 to 10.0 μM, with a limit of detection of about 3.7 nM. Besides, the developed colorimetric strategy was successfully applied for detecting Hg²⁺ ions in human blood with favorable detection recoveries, indicating its potential for applications in the biomedical analysis, environmental monitoring, and food safety fields.

Dual-mode colorimetric-photothermal sensing platform of acetylcholinesterase activity based on the peroxidase-like activity of Fe-N-C nanozyme

Sensors based on colorimetry, fluorescence, and electrochemistry have been widely employed to detect acetylcholinesterase and its inhibitors, however, there are only a minority of strategies for AChE detection based on photothermal method. This work reports a versatile dual-mode colorimetric and photothermal biosensing platform for acetylcholinesterase (AChE) detection and its inhibitor (paraoxon-ethyl, a model of AChE inhibitors) monitor based on Fe-N-C/H₂O₂/3,3',5,5'-tetramethylbenzidine (TMB) system. The Fe-N-C with abundant active Fe-Nx sites shows outstanding peroxidase-mimicking activity and can be used to promote the generation of •OH by H₂O₂ to oxidize TMB. However, the introduction of mercapto molecules tending to coordinate with metal atoms result in the block of action site in Fe-N-C, thereby decrease its peroxidase-mimetic activity. The designed biosensor principle is based on the block of active sites of Fe-N-C by thiocholine (TCh, one kind of mercapto molecules) that can be produced by acetylthiocholine (ATCh) in the presence of AChE. Under optimum conditions, the limit of detection (LOD) for AChE activity is 1.9 mU mL^-1 (colorimetric) and 2.2 mU mL^-1 (photothermal), while for paraoxon-ethyl is 0.012 μg mL^-1 (colorimetric) and 0.013 μg mL^-1 (photothermal), respectively. The assay we proposed not only can be designed to monitor AChE detection and its inhibitors, but also can be easily extended for the detection of other biomolecules relate to the generation or consumption of H₂O₂.

Colorimetric determination of biothiols based on peroxidase-mimicking Ag nanoparticles decorated Ti3C2 nanosheets

Ag nanoparticle-decorated Ti₃C₂ nanosheets (AgNPs@Ti₃C₂ NSs) were facilely synthesized via a self-reduction approach, in which Ti₃C₂ NSs acted as both reductant and supporter. The AgNPs@Ti₃C₂ NS nanocomposite exhibited excellent peroxidase-like activity with o-phenylenediamine (OPD) and H₂O₂ as substrates. The catalytic behavior followed the typical Michaelis-Menten kinetics; Michaelis constant (K_m) and maximum initial velocity (V_max) for OPD were 0.263 mM and 43.2 × 10^-8 M^-1 s, indicating high affinity and high catalytic efficiency towards OPD. The catalytic mechanism was revealed to be an accelerated electron transfer process. Based on the inhibition effect on the peroxidase-like activity of AgNPs@Ti₃C₂ NSs, a simple, fast, and sensitive colorimetric method for detection of low-weight biothiols (cysteine (Cys), homocysteine (Hcy), and glutathione (GSH)) was developed by measuring the absorbance at 425 nm. The colorimetric method displayed wide linear range (50 nM to 50 μM for Cys, 10 nM to 250 μM for Hcy, 10 nM to 50 μM for GSH), low limit of detection (48.5 nM for Cys, 5.5 nM for Hcy, 7.0 nM for GSH), and good selectivity and short assay time (3 min). Moreover, the feasibility of this colorimetric sensor was demonstrated by accurately determining Cys in diluted human serum samples; good recovery (95.9-101.0%) and low relative standard deviations (2.8-4.9%) were obtained, showing great promise for point-of-care test in clinical samples.

Enzyme-free colorimetric detection of biothiols based on the photoinduced oxidation of 3,3',5,5'-tetramethylbenzidine

Realizing the rapid and on-site detection of biothiols in complex biological and food samples using simple assays and devices remains a major challenge. In this study, biothiols containing sulfhydryl groups were found to be able to inhibit the photo-triggered oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). Based on the discovery, using the commercially available and low-cost TMB as the chromogenic substrate, an enzyme-free colorimetric approach was developed for the rapid determination of biothiols. The method does not involve the introduction of any natural enzymes, nanoenzymes, and external oxidants. The mechanisms of the photoinduced oxidation of TMB and the detection of biothiols were proposed. Furthermore, a smartphone-based portable device integrated with test strips was constructed by the 3D printing technique. This device can simultaneously meet the requirements of the photocatalytic oxidation reaction of TMB and the detection of biothiols. The entire process only takes less than 5 min. The successful detection of cysteine in urine and milk samples demonstrates the great potential of the device in the on-site assays.

Application of Janus Particles in Point-of-Care Testing

Janus particles (JPs), named after the two-faced Roman god, are asymmetric particles with different chemical properties or polarities. JPs have been widely used in the biomedical field in recent years, including as drug carriers for targeted controlled drug release and as biosensors for biological imaging and biomarker detection, which is crucial in the early detection and treatment of diseases. In this review, we highlight the most recent advancements made with regard to Janus particles in point-of-care testing (POCT). Firstly, we introduce several commonly used methods for preparing Janus particles. Secondly, we present biomarker detection using JPs based on various detection methods to achieve the goal of POCT. Finally, we discuss the challenges and opportunities for developing Janus particles in POCT. This review will facilitate the development of POCT biosensing devices based on the unique properties of Janus particles.

Single-Atom Nanozymes: Fabrication, Characterization, Surface Modification and Applications of ROS Scavenging and Antibacterial

Nanozymes are nanomaterials with intrinsic natural enzyme-like catalytic properties. They have received extensive attention and have the potential to be an alternative to natural enzymes. Increasing the atom utilization rate of active centers in nanozymes has gradually become a concern of scientists. As the limit of designing nanozymes at the atomic level, single-atom nanozymes (SAzymes) have become the research frontier of the biomedical field recently because of their high atom utilization, well-defined active centers, and good natural enzyme mimicry. In this review, we first introduce the preparation of SAzymes through pyrolysis and defect engineering with regulated activity, then the characterization and surface modification methods of SAzymes are introduced. The possible influences of surface modification on the activity of SAzymes are discussed. Furthermore, we summarize the applications of SAzymes in the biomedical fields, especially in those of reactive oxygen species (ROS) scavenging and antibacterial. Finally, the challenges and opportunities of SAzymes are summarized and prospected.

Au-Fe3O4 heterodimer multifunctional nanoparticles-based platform for ultrasensitive naked-eye detection of Salmonella typhimurium

In this work, we developed an ultrasensitive colorimetry for Salmonella typhimurium detection with multifunctional Au-Fe₃O₄ dumbbell-like nanoparticles (DBNPs) which possessed easy bio-modifiability, excellent LSPR characteristics, superparamagnetic properties and super peroxidase-like activity. In the detection, the anti-S. typhimurium antibody modified DBNPs (IDBNPs) bound with S. typhimurium and aggregated on their surfaces in a large number, which showed much quicker magnetic response than free IDBNPs. By controlling appropriate separation conditions, IDBNPs@S. typhimurium composites were captured, while free IDBNPs were remained in the supernatant. Therefore, by detecting the absorbance of the supernatant, quantitative detection was achieved from 10 to 1000 CFU/mL. Moreover, utilizing the peroxidase-like activity of IDBNPs, we further realized semi-quantitative naked-eye detection. By adding ABTS into the above supernatant, which was oxidized to green chelate (OxABTS), colorimetric signal was amplified significantly, and meanwhile, the green chelates and the wine-red IDBNPs engendered mixed color, enhancing the range of color gradation and greatly improving the visual resolution. Finally, a detection limit (10 CFU/mL) comparable with that of above spectrum measurement was achieved. Besides, our method exhibited efficient capture capability (nearly 100% even for rare S. typhimurium), and had good stability and specificity, and acceptable anti-interference ability in fetal bovine serum and milk samples.

Colorimetric determination of biothiols with AuNPs@MoS2 NSs as a peroxidase mimetic enzyme

The synthesis of AuNPs@MoS2 NSs was achieved and the sensing of biothiols was carried out using AuNPs@MoS2 NSs as enzyme mimics.