Re: re: Heat generation and drill wear during dental implant site preparation: systematic review

Ridge augmentation-The new field of computerized guided surgery: A technical note for minimal-invasive bone splitting

Different instrumentation procedures of the alveolar ridge expansion technique (ARST) with or without Guided Bone Regeneration have proven to be effective for successful implant placement in cases of alveolar bone width between 3mm and 6mm. Conventional bone splitting techniques require flap arising. This technical note demonstrates a method for flapless guided bone splitting. For this purpose, a newly developed surgical guide with internal irrigation channels was used. Using CAD-CAM additive technology, a narrow slot along the field of interest and a pin of a cooling pipe was designed and implemented in a surgical guide template. The bone split was performed flapless through the surgical guide while the cooling pipe was connected to it. During surgery, the piezo-driven instrument was moved within that slot, and the irrigation solution was directly rinsing it at point of entry through the irrigation channel. This procedure was performed on a 3.3 mm wide alveolar ridge achieving over 3 mm of bone gain. The described method combines several positive aspects. The micro-invasive flapless surgical procedure might improve postoperative healing. Additionally, sufficient cooling of the bone might lead to less thermal affection of bone cells and less resorption of the cortical bone. However, systematic studies are needed to confirm the observations of the presented case report.

Guided Implant Placement Using an Internally Cooling Surgical Template: A Technical Note

Cooling irrigation during implant bed preparation is mandatory to avoid overheating. Due to the surgical guide design, external cooling systems do not reach the point of entry of the implant burr. Here, a new technique for irrigation during guided implant surgery for direct rinse of the burr is described. Using computer-aided design/computer-aided manufacturing additive technology, a pin of a cooling pipe was designed and implemented in a surgical guide template. The implant bed preparation was performed while the cooling pipe was connected to the surgical guide. During surgery, the irrigation solution was directly rinsing the burr at the point of entry through the irrigation channel. The use of a cooling surgical guide seems to improve the cooling of the bone during implant bed preparation. This might lead to less thermal effect of bone cells. However, systematic studies are needed to confirm the observations of the presented case report.