RhBMP-7 improves survival and eruption in a growing tooth avulsion trauma model

Exosomes derived from stem cells from apical papilla promote angiogenesis via miR-126 under hypoxia

OBJECTIVES

To explore the effect of exosomal miR-126 derived from stem cells from the apical papilla (SCAPs) under hypoxia on human umbilical vein endothelial cell (HUVEC) angiogenesis.

METHODS

miR-126 mimics plasmids were used to upregulate miR-126 in SCAPs. Internalization of PKH26-labeled exosomes was examined by fluorescent microscopy. CCK-8 assay, Transwell assay, scratch assay, tube formation assay, and Matrigel plug assay were performed to detect the effects of exosomes on the angiogenic ability of HUVECs. The luciferase reporter assay and rescue assay were performed to examine the relationship between miR-126 and sprouty-related, EVH1 domain-containing protein 1 (SPRED1). The involvement of SPRED1 and the extracellular signal-regulated kinase (ERK) signaling pathway was evaluated by western blotting.

RESULTS

miR-126 expression was upregulated in SCAPs and in SCAP-derived exosomes under hypoxia. miR-126 expression was increased in HUVECs when cocultured with SCAP-derived exosomes. Induced overexpression of miR-126 in hypoxic SCAPs and secreted exosomes resulted in enhanced angiogenesis both in vitro and in vivo. Western blot analysis revealed that miR-126-mediated SPRED1 downregulation induced activation of ERK signaling.

CONCLUSIONS

Under hypoxic conditions, exosomes derived from SCAPs can promote HUVEC angiogenesis through expression of miR-126, which subsequently suppresses SPRED1 and activates the ERK signaling pathway.

The recent advances in scaffolds for integrated periodontal regeneration

The periodontium is an integrated, functional unit of multiple tissues surrounding and supporting the tooth, including but not limited to cementum (CM), periodontal ligament (PDL) and alveolar bone (AB). Periodontal tissues can be destructed by chronic periodontal disease, which can lead to tooth loss. In support of the treatment for periodontally diseased tooth, various biomaterials have been applied starting as a contact inhibition membrane in the guided tissue regeneration (GTR) that is the current gold standard in dental clinic. Recently, various biomaterials have been prepared in a form of tissue engineering scaffold to facilitate the regeneration of damaged periodontal tissues. From a physical substrate to support healing of a single type of periodontal tissue to multi-phase/bioactive scaffold system to guide an integrated regeneration of periodontium, technologies for scaffold fabrication have emerged in last years. This review covers the recent advancements in development of scaffolds designed for periodontal tissue regeneration and their efficacy tested in vitro and in vivo. Pros and Cons of different biomaterials and design parameters implemented for periodontal tissue regeneration are also discussed, including future perspectives.

Animal models for periodontal regeneration and peri-implant responses

Translation of experimental data to the clinical setting requires the safety and efficacy of such data to be confirmed in animal systems before application in humans. In dental research, the animal species used is dependent largely on the research question or on the disease model. Periodontal disease and, by analogy, peri-implant disease, are complex infections that result in a tissue-degrading inflammatory response. It is impossible to explore the complex pathogenesis of periodontitis or peri-implantitis using only reductionist in-vitro methods. Both the disease process and healing of the periodontal and peri-implant tissues can be studied in animals. Regeneration (after periodontal surgery), in response to various biologic materials with potential for tissue engineering, is a continuous process involving various types of tissue, including epithelia, connective tissues and alveolar bone. The same principles apply to peri-implant healing. Given the complexity of the biology, animal models are necessary and serve as the standard for successful translation of regenerative materials and dental implants to the clinical setting. Smaller species of animal are more convenient for disease-associated research, whereas larger animals are more appropriate for studies that target tissue healing as the anatomy of larger animals more closely resembles human dento-alveolar architecture. This review focuses on the animal models available for the study of regeneration in periodontal research and implantology; the advantages and disadvantages of each animal model; the interpretation of data acquired; and future perspectives of animal research, with a discussion of possible nonanimal alternatives. Power calculations in such studies are crucial in order to use a sample size that is large enough to generate statistically useful data, whilst, at the same time, small enough to prevent the unnecessary use of animals.

Changing Paradigms in Cranio-Facial Regeneration: Current and New Strategies for the Activation of Endogenous Stem Cells

Craniofacial area represent a unique district of human body characterized by a very high complexity of tissues, innervation and vascularization, and being deputed to many fundamental function such as eating, speech, expression of emotions, delivery of sensations such as taste, sight, and earing. For this reasons, tissue loss in this area following trauma or for example oncologic resection, have a tremendous impact on patients' quality of life. In the last 20 years regenerative medicine has emerged as one of the most promising approach to solve problem related to trauma, tissue loss, organ failure etc. One of the most powerful tools to be used for tissue regeneration is represented by stem cells, which have been successfully implanted in different tissue/organs with exciting results. Nevertheless, both autologous and allogeneic stem cell transplantation raise many practical and ethical concerns that make this approach very difficult to apply in clinical practice. For this reason different cell free approaches have been developed aiming to the mobilization, recruitment, and activation of endogenous stem cells into the injury site avoiding exogenous cells implant but instead stimulating patients' own stem cells to repair the lesion. To this aim many strategies have been used including functionalized bioscaffold, controlled release of stem cell chemoattractants, growth factors, BMPs, Platelet-Rich-Plasma, and other new strategies such as ultrasound wave and laser are just being proposed. Here we review all the current and new strategies used for activation and mobilization of endogenous stem cells in the regeneration of craniofacial tissue.

A comparison of bovine bone and hydroxyapatite scaffolds during initial bone regeneration: an in vitro evaluation

OBJECTIVES

To evaluate the different behavior of 3-dimensional biomaterial scaffolds-Bovine Bone (BB; Bio-Oss) and Hydroxyapatite (HA; ENGIpore)-during initial bone healing and development.

MATERIALS AND METHODS

Human dental papilla stem cells (hDPaSCs) were selected with FACsorter cytofluorimetric analysis, cultured with osteogenic medium, and analyzed with Alizarin red stained after differentiation. The obtained osteoblast-like cells (OCs) were cultured with BB and HA. alkaline phosphatase (ALP), OC, MEPE, and runt-related transcription factor 2 (RUNX2) expression markers were investigated performing Western blot and reverse transcription-polymerase chain reaction (RT-PCR) analysis. After 40 days, samples were analyzed by light and electron microscopy.

RESULTS

All the samples showed high in vitro biocompatibility and qualitative differences of OCs adhesion. RT-PCR and Western blot data exhibited similar marker rate, but ALP, OC, MEPE, and RUNX2expression, during initial healing and bone regeneration phase, was higher and faster in human dental papilla onto BB than in HA scaffolds. In biomaterials growth, RUNX2 seems to play an important role as a key regulator in human OCs from dental papilla bone development.

CONCLUSION

Different surface BB scaffold characteristics seem to play a critical role in OCs differentiation showing different time of bone regeneration morphological characteristics as well as higher and faster levels of all observed markers.

A histological and micro-CT investigation in to the effect of NGF and EGF on the periodontal, alveolar bone, root and pulpal healing of replanted molars in a rat model - a pilot study

BACKGROUND

This study aims to investigate, utilising micro-computed tomography (micro-CT) and histology, whether the topical application of nerve growth factor (NGF) and/or epidermal growth factor (EGF) can enhance periodontal, alveolar bone, root and pulpal tissue regeneration while minimising the risk of pulpal necrosis, root resorption and ankylosis of replanted molars in a rat model.

METHODS

Twelve four-week-old male Sprague-Dawley rats were divided into four groups: sham, collagen, EGF and NGF. The maxillary right first molar was elevated and replanted with or without a collagen membrane impregnated with either the growth factors EGF or NGF, or a saline solution. Four weeks after replantation, the animals were sacrificed and the posterior maxilla was assessed using histological and micro-CT analysis. The maxillary left first molar served as the control for the corresponding right first molar.

RESULTS

Micro-CT analysis revealed a tendency for all replanted molars to have reduced root length, root volume, alveolar bone height and inter-radicular alveolar bone volume. It appears that the use of the collagen membrane had a negative effect while no positive effect was noted with the incorporation of EGF or NGF. Histologically, the incorporation of the collagen membrane was found to negatively affect pulpal, root, periodontal and alveolar bone healing with pulpal inflammation and hard tissue formation, extensive root resorption and alveolar bone fragmentation. The incorporation of EGF and NGF did not improve root, periodontal or alveolar bone healing. However, EGF was found to improve pulp vascularisation while NGF-improved pulpal architecture and cell organisation, although not to the level of the control group.

CONCLUSIONS

Results indicate a possible benefit on pulpal vascularisation and pulpal cell organisation following the incorporation of EGF and NGF, respectively, into the alveolar socket of replanted molars in the rat model. No potential benefit of EGF and NGF was detected in periodontal or root healing, while the use of a collagen membrane carrier was found to have a negative effect on the healing response.

Alveolar ridge augmentation using implants coated with recombinant human bone morphogenetic protein-7 (rhBMP-7/rhOP-1): histological observations

BACKGROUND

Pre-clinical studies have shown that recombinant human bone morphogenetic protein-2 (rhBMP-2) coated onto purpose-designed titanium porous-oxide surface implants induces clinically relevant bone formation and osseointegration. The objective of this study was to examine the potential of rhBMP-7, also known as recombinant human osteogenic protein-1 (rhOP-1), coated onto titanium porous-oxide surface implants to support vertical alveolar ridge augmentation and implant osseointegration.

MATERIALS AND METHODS

Bilateral, critical-size, 5 mm, supraalveolar peri-implant defects were created in six young adult Hound Labrador mongrel dogs. The animals received implants coated with rhBMP-7 at 1.5 or 3.0 mg/ml randomized to contra-lateral jaw quadrants. The mucoperiosteal flaps were advanced, adapted, and sutured to submerge the implants for primary intention healing. The animals received fluorescent bone markers at 3, 4, 7, and 8 weeks post-surgery when they were euthanized for histological evaluation.

RESULTS

Without striking differences between treatments, the implant sites exhibited a swelling that gradually regressed to become hard to palpation disguising the implant contours. The histological evaluation showed robust bone formation; the newly formed bone assuming characteristics of the contiguous resident bone, bone formation (height and area) averaging 4.1+/-1.0 versus 3.6+/-1.7 mm and 3.6+/-1.9 versus 3.1+/-1.8 mm(2); and bone density 56%versus 50% for implants coated with rhBMP-7 at 1.5 and 3.0 mg/ml, respectively. Both treatments exhibited clinically relevant osseointegration, the corresponding bone-implant contact values averaging 51% and 47%. Notable peri-implant resident bone remodelling was observed for implants coated with rhBMP-7 at 3.0 mg/ml.

CONCLUSIONS

rhBMP-7 coated onto titanium porous-oxide surface implants induces clinically relevant local bone formation including osseointegration and vertical augmentation of the alveolar ridge, the higher concentration/dose associated with some local side effects.

New advances in fluorochrome sequential labelling of teeth using seven different fluorochromes and spectral image analysis

Fluorochrome sequential labelling of mineralizing tissues is commonly used in different fields of clinical and basic research. Recently we improved polychrome fluorescent sequential labelling of bone by applying spectral image analysis to discriminate seven different fluorochromes. Although basic mineralization processes of bone and teeth follow comparable principles, the respective tissues differ in terms of matrix composition and mineral assembly. The aim of this study therefore was to investigate the feasibility of this new technique for polychrome sequential labelling of teeth and to demonstrate the advantages in the field of dentistry. Furthermore, the exact labelled area of each fluorochrome could be measured, even in regions of overlapping fluorochromes. The technique presented may provide a basis for further investigations of mineralization processes of different anatomical dental structures.

The mechanical integrity of in vivo engineered heterotopic bone

Recent advances in tissue engineering have aroused interest in growth of heterotopic bone for the repair of skeletal defects. This study demonstrates an in vivo method in minipigs of engineering individual human-sized mandible replacements of heterotopic bone with a mechanical integrity similar to natural bone. Ten individualized mandible replacement scaffolds were created using computer-aided design (CAD) techniques. Five had a resorbable external scaffold made of polylactite mesh (test group 1) and five had had a non-resorbable external scaffold of titanium mesh (test group 2). The mesh scaffolds were loaded each with five BioOss blocks serving as internal scaffolds and 3.5 mg recombinant human Bone Morphogenetic Protein-7. The loaded mesh scaffolds were implanted into the latissimus dorsi muscles of five infant minipigs. After 6 weeks the mandible replacements were harvested. Core biopsy cylinders were taken from the replacements of both test groups and from the natural pig mandibles (control 1). Also, core biopsies from plain BioOss Blocks were gained (control 2). The core biopsy cylinders were loaded axially into a compression test device to evaluate the mechanical compression resistance. Additional specimen underwent histological examination. Both test groups resulted in successful bone induction with degrees of compression resistance [Test 1: 1.62 MPa (SD+/-0.73); Test 2: 1.51 MPa (SD+/-0.56)] statistically insignificant when compared to natural porcine mandibular bone [1.75 MPa (SD+/-0.69)]. This differed significantly from the much lower compression resistance seen in the unadulterated BioOss [0.92 MPa (SD+/-0.04)]. Following this, the in vivo engineered bone has a similar mechanical compression stability as natural bone.