Stoichiometry of ATP and metal cofactor interaction with the sarcoplasmic reticulum Ca(2+)-ATPase: a binding model accounting for radioisotopic and fluorescence results

Improving the Acetic Acid Fermentation of Acetobacter pasteurianus by Enhancing the Energy Metabolism

Energy metabolism is important for cell growth and tolerance against environment stress. In acetic acid fermentation by Acetobacter pasteurianus, the correlation coefficients of acid production rate with energy charge and ATP content were 0.9981 and 0.9826, respectively. The main energy metabolism pathway, including glycolysis pathway, TCA cycle, ethanol oxidation, pentose phosphate pathway, and ATP production, was constructed by transcriptome analysis. The effects of fermentation conditions, including dissolved oxygen, initial acetic acid concentration, and total concentration, on acetic acid fermentation and energy metabolism of A. pasteurianus were analyzed by using the RT-PCR method. The results showed the high energy charge inhibited glucose catabolism, and associated with the high ethanol oxidation rate. Consequently, a virtuous circle of increased ethanol oxidation, increased energy generation, and acetic acid tolerance was important for improving acetic acid fermentation.

Sarcoplasmic reticulum calcium ATPase interactions with decaniobate, decavanadate, vanadate, tungstate and molybdate

Over the last few decades there has been increasing interest in oxometalate and polyoxometalate applications to medicine and pharmacology. This interest arose, at least in part, due to the properties of these classes of compounds as anti-cancer, anti-diabetic agents, and also for treatment of neurodegenerative diseases, among others. However, our understanding of the mechanism of action would be improved if biological models could be used to clarify potential toxicological effects in main cellular processes. Sarcoplasmic reticulum (SR) vesicles, containing a large amount of Ca(2+)-ATPase, an enzyme that accumulates calcium by active transport using ATP, have been suggested as a useful model to study the effects of oxometalates on calcium homeostasis. In the present article, it is shown that decavanadate, decaniobate, vanadate, tungstate and molybdate, all inhibited SR Ca(2+)-ATPase, with the following IC(50) values: 15, 35, 50, 400 μM and 45 mM, respectively. Decaniobate (Nb(10)), is the strongest P-type enzyme inhibitor, after decavanadate (V(10)). Atomic-absorption spectroscopy (AAS) analysis, indicates that decavanadate binds to the protein with a 1:1 decavanadate:Ca(2+)-ATPase stoichiometry. Furthermore, V(10) binds with similar extension to all the protein conformations, which occur during calcium translocation by active transport, namely E1, E1P, E2 and E2P, as analysed by AAS. In contrast, it was confirmed that the binding of monomeric vanadate (H(2)VO(4)(2-); V(1)) to the calcium pump is favoured only for the E2 and E2P conformations of the ATPase, whereas no significant amount of vanadate is bound to the E1 and E1P conformations. Scatchard plot analysis, confirmed a 1:1 ratio for decavanadate-Ca(2+)-ATPase, with a dissociation constant, k(d) of 1 μM(-1). The interaction of decavanadate V(10)O(28)(6-) (V(10)) with Ca(2+)-ATPase is prevented by the isostructural and isoelectronic decaniobate Nb(10)O(28)(6-) (Nb(10)), whereas no significant effects were detected with ATP or with heparin, a known competitive ATP binding molecule, suggesting that V(10) binds non-competitively, with respect to ATP, to the protein. Finally, it was shown that decaniobate inhibits SR Ca(2+)-ATPase activity in a non competitive type of inhibition, with respect to ATP. Taken together, these data demonstrate that decameric niobate and vanadate species are stronger inhibitors of the SR calcium ATPase than simple monomeric vanadate, tungstate and molybdate oxometalates, thus affecting calcium homeostasis, cell signalling and cell bioenergetics, as well many other cellular processes. The ability of these oxometalates to act either as phosphate analogues, as a transition-state analogue in enzyme-catalysed phosphoryl group transfer processes and as potentially nucleotide-dependent enzymes modulators or inhibitors, suggests that different oxometalates may reveal different mechanistic preferences in these classes of enzymes.

Stable structural analog of Ca2+-ATPase ADP-insensitive phosphoenzyme with occluded Ca2+ formed by elongation of A-domain/M1'-linker and beryllium fluoride binding

We have developed a stable analog for the ADP-insensitive phosphoenzyme intermediate with two occluded Ca(2+) at the transport sites (E2PCa(2)) of sarcoplasmic reticulum Ca(2+)-ATPase. This is normally a transient intermediate state during phosphoenzyme isomerization from the ADP-sensitive to ADP-insensitive form and Ca(2+) deocclusion/release to the lumen; E1PCa(2) --> E2PCa(2) --> E2P + 2Ca(2+). Stabilization was achieved by elongation of the Glu(40)-Ser(48) loop linking the Actuator domain and M1 (1st transmembrane helix) with four glycine insertions at Gly(46)/Lys(47) and by binding of beryllium fluoride (BeF(x)) to the phosphorylation site of the Ca(2+)-bound ATPase (E1Ca(2)). The complex E2Ca(2)xBeF(3)(-) was also produced by lumenal Ca(2+) binding to E2xBeF(3)(-) (E2P ground state analog) of the elongated linker mutant. The complex was stable for at least 1 week at 25 degrees C. Only BeF(x), but not AlF(x) or MgF(x), produced the E2PCa(2) structural analog. Complex formation required binding of Mg(2+), Mn(2+), or Ca(2+) at the catalytic Mg(2+) site. Results reveal that the phosphorylation product E1PCa(2) and the E2P ground state (but not the transition states) become competent to produce the E2PCa(2) transient state during forward and reverse phosphoenzyme isomerization. Thus, isomerization and lumenal Ca(2+) release processes are strictly coupled with the formation of the acylphosphate covalent bond at the catalytic site. Results also demonstrate the critical structural roles of the Glu(40)-Ser(48) linker and of Mg(2+) at the catalytic site in these processes.

Does life consistently maximise energy intensity?

We propose that a basic biological imperative of all organisms is to maximise energy (E) intensity, defined as the average rate of energy use per unit area of the Earth's surface. The dominant organism in any given environment is predicted to be that exerting the greatest E intensity regardless of evolutionary origin. Our 'theory of biological E intensity' thus explains variation in life form in terms of adaptations as opposed to accidents of biological history. It defines the competitive criterion in all metabolic pathways and industrial processes as the average rate of kinetic energy use, excluding heating but including all directed biological kinesis at scales up to the whole organism. A suggested unit for E intensity is joules per square meter per year. Because catalysts are crucial to extremely rapid use of energy (and therefore maximisation of E intensity), catalytic nutrient elements can be viewed as the ultimate means of life. It follows that a common denominator of all dominant organisms would be the acquisition of an optimal catalytic formula as determined by concentrations and ratios of C, H, O, N, S, Na, Mg, P, K, Ca, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Mo, Cd, I, W, and Hg. The likely local shortages of various of these elements can theoretically be alleviated by various changes in the size, shape, and/or behaviour of organisms, depending on the environment. Thus, the availability, and potential for supplementation, of catalytic elements would be the ultimate basis for adaptation, largely determining which life form dominates in any particular location. The theory predicts the following. (1) In nutrient-rich environments offering the optimal catalytic formula, dominant organisms will be microbes. This is because microbes, and prokaryotes in particular, excel in E intensity through rapid biomolecular turnover, enabling them to usurp resources despite minimising biomass, complexity, and information. (2) Where the environment is catabolically dystrophic (i.e. scarce in certain nutrients required for catabolism), macrobes (e.g. humans and trees) will be superior competitors because they can collect and supplement nutrients and thereby approach the optimal catalytic formula. This enables macrobes, despite having considerably slower metabolism per unit body mass, to enhance E intensity relative to competing microbes constrained by catabolic dystrophy. Finally, (3) where the environment is anabolically dystrophic (i.e. scarce in certain nutrients required for anabolism) microbes will again dominate because biomolecular turnover can be relatively free from constraint given the limited fuel available. We suggest that an important and overlooked way to achieve power is to reuse energy, and that all organisms maximise E intensity by converting chemical potential energy (i.e. in fuel) into circuits of electromagnetic energy comprising electric charge, photons, and excited electrons. Because space and time merge subatomically, these electromagnetic circuits represent a concentration in spacetime of energy that (1) is concurrently kinetic and static, hence available for immediate use yet also conserved with minimal dissipation, and (2) ultimately promotes catalysis, which we assert is the primary biological tactic for maximising E intensity and thus fitness.

Formation of the stable structural analog of ADP-sensitive phosphoenzyme of Ca2+-ATPase with occluded Ca2+ by beryllium fluoride: structural changes during phosphorylation and isomerization

As a stable analog for ADP-sensitive phosphorylated intermediate of sarcoplasmic reticulum Ca(2+)-ATPase E1PCa(2).Mg, a complex of E1Ca(2).BeF(x), was successfully developed by addition of beryllium fluoride and Mg(2+) to the Ca(2+)-bound state, E1Ca(2). In E1Ca(2).BeF(x), most probably E1Ca(2).BeF(3)(-), two Ca(2+) are occluded at high affinity transport sites, its formation required Mg(2+) binding at the catalytic site, and ADP decomposed it to E1Ca(2), as in E1PCa(2).Mg. Organization of cytoplasmic domains in E1Ca(2).BeF(x) was revealed to be intermediate between those in E1Ca(2).AlF(4)(-) ADP (transition state of E1PCa(2) formation) and E2.BeF(3)(-).(ADP-insensitive phosphorylated intermediate E2P.Mg). Trinitrophenyl-AMP (TNP-AMP) formed a very fluorescent (superfluorescent) complex with E1Ca(2).BeF(x) in contrast to no superfluorescence of TNP-AMP bound to E1Ca(2).AlF(x). E1Ca(2).BeF(x) with bound TNP-AMP slowly decayed to E1Ca(2), being distinct from the superfluorescent complex of TNP-AMP with E2.BeF(3)(-), which was stable. Tryptophan fluorescence revealed that the transmembrane structure of E1Ca(2).BeF(x) mimics E1PCa(2).Mg, and between those of E1Ca(2).AlF(4)(-).ADP and E2.BeF(3)(-). E1Ca(2).BeF(x) at low 50-100 microm Ca(2+) was converted slowly to E2.BeF(3)(-) releasing Ca(2+), mimicking E1PCa(2).Mg --> E2P.Mg + 2Ca(2+). Ca(2+) replacement of Mg(2+) at the catalytic site at approximately millimolar high Ca(2+) decomposed E1Ca(2).BeF(x) to E1Ca(2). Notably, E1Ca(2).BeF(x) was perfectly stabilized for at least 12 days by 0.7 mm lumenal Ca(2+) with 15 mm Mg(2+). Also, stable E1Ca(2).BeF(x) was produced from E2.BeF(3)(-) at 0.7 mm lumenal Ca(2+) by binding two Ca(2+) to lumenally oriented low affinity transport sites, as mimicking the reverse conversion E2P. Mg + 2Ca(2+) --> E1PCa(2).Mg.