Preparation and in-vitro release of chlorothiazide novel pH-sensitive chitosan-N,N′-dimethylacrylamide semi-interpenetrating network microspheres

Characterization of structural and functional properties of soy protein isolate and sodium alginate interpenetrating polymer network hydrogels

BACKGROUND

This study used enzymatic and Ca2+ cross-linking methods to prepare edible soy protein isolate (SPI) and sodium alginate (SA) interpenetrating polymer network hydrogels to overcome the disadvantages of traditional interpenetrating polymer network (IPN) hydrogels, such as poor performance, high toxicity, and inedibility. The influence of changes in SPI and SA mass ratio on the performance of SPI-SA IPN hydrogels was investigated.

RESULTS

Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were used to characterize the structure of the hydrogels. Texture profile analysis (TPA), rheological properties, swelling rate, and Cell Counting Kit-8 (CCK-8) were used to evaluate physical and chemical properties and safety. The results showed that, compared with SPI hydrogel, IPN hydrogels had better gel properties and structural stability. As the mass ratio of SPI-SA IPN changed from 1:0.2 to 1:1, the gel network structure of hydrogels also tended to be dense and uniform. The water retention and mechanical properties of these hydrogels, such as storage modulus (G'), loss modulus (G"), and gel hardness increased significantly and were greater than those of the SPI hydrogel. Cytotoxicity tests were also performed. The biocompatibility of these hydrogels was good.

CONCLUSIONS

This study proposes a new method to prepare food-grade IPN hydrogels with mechanical properties of SPI and SA, which may have strong potential for the development of new foods. © 2023 Society of Chemical Industry.

Design of polyacrylamide grafted sesbania gum-mediated pH-responsive IPN-based microbeads for delivery of diclofenac sodium: In-vitro-in-vivo characterizations

Microwave-assisted grafting of polyacrylamide on sesbania gum (PAAM-g-SG) was implemented employing a 3² full factorial experimental design and was hydrolyzed using sodium hydroxide (NaOH) to form H-PAAM-g-SG. Further, the diclofenac sodium-loaded novel pH-sensitive interpenetrating polymeric network (IPN) microbeads were designed using an optimized H-PAAM-g-SG and sodium alginate (SA). Different spectroscopic analysis including FTIR spectroscopy, ¹H NMR spectroscopy, elemental analysis, thermal analysis, etc. was performed to confirm the synthesis of PAAM-g-SG and diclofenac-loaded pH-sensitive IPN H-PAAM-g-SG-SA microbeads. Here, Ca⁺² ions combine with two strands of SA and form a round-shape structure that encloses uncross-linked H-PAAM-g-SG polymer and diclofenac sodium. As well, glutaraldehyde (GL) addition improved the mechanical strength due to acetal structure between hydroxyl of H-PAAM-g-SG and aldehyde of GL. The drug entrapment was confirmed proportional relationship to the Ca⁺² ions concentration whereas an increase in GL concentration resulted in a reduced drug entrapment. The pH pulsatile study assured the reversible swelling-shrinkage behavior of IPN microbeads due to the carboxyl group of PAAM-g-SG. The drug release from H-PAAM-g-SG-SA microbeads (batch: S9) was found to be 84.21 % (12h) which was non-significant (p > 0.05; f2 = 79 ∼ 90) over marketed formulation (83.31 %). Moreover, it follows the Korsmeyer Peppas (R² = 0.996) as the best-fit release kinetic model. The pH-sensitive release of diclofenac sodium from IPN H-PAAM-g-SG-SA microbeads was assured based on in vivo anti-inflammatory activity (p < 0.05). Therefore, developed novel pH-sensitive IPN microbeads based on H-PAAM-g-SG are a promising polymeric carrier substitute for delivery of drugs actuated by a pH stimulus.

SYNTHESIS AND PROPERTIES OF CROSS-LINKED HYDROGELS BASED ON CHITOSAN AND POLYACRYLAMIDE

The synthesis and physico-chemical properties of chemically cross-linked hydrogels based on polyacrylamide and chitosan, which form interpenetrating polymer networks, are considered in the work. The strategy of obtaining cross-linked networks of both polyacrylamide and polyacrylamide grafted on chitosan by radical polymerization was used. The equilibrium swelling properties, which depend on the pH value of the solution and the composition of the gels, were studied. The chemical structure of the obtained hydrogels was characterized by IR spectroscopy.

Lower Critical Solution Temperature Tuning and Swelling Behaviours of NVCL-Based Hydrogels for Potential 4D Printing Applications

The phase transitions of poly (N-vinyl caprolactam) (PNVCL) hydrogels are currently under investigation as possible materials for biomedical applications thanks to their thermosensitive properties. This study aims to use the photopolymerisation process to simulate the 4D printing process. NVCL-based polymers with different thermal properties and swellability were prepared to explore the possibility of synthetic hydrogels being used for 4D printing. In this contribution, the thermal behaviours of novel photopolymerised NVCL-based hydrogels were analysed. The lower critical solution temperature (LCST) of the physically crosslinked gels was detected using differential scanning calorimetry (DSC), ultraviolet (UV) spectroscopy, and cloud point measurement. The chemical structure of the xerogels was characterised by means of Fourier transform infrared spectroscopy (FTIR). Pulsatile swelling studies indicated that the hydrogels had thermo-reversible properties. As a result, the effect of varying the macromolecular monomer concentration was apparent. The phase transition temperature is increased when different concentrations of hydrophilic monomers are incorporated. The transition temperature of the hydrogels may allow for excellent flexibility in tailoring transition for specific applications, while the swelling and deswelling behaviour of the gels is strongly temperature- and monomer feed ratio-dependent.

Synthesis, Characterization, and Intrinsic Dissolution Studies of Drug-Drug Eutectic Solid Forms of Metformin Hydrochloride and Thiazide Diuretics

The mechanochemical synthesis of drug–drug solid forms containing metformin hydrochloride (MET·HCl) and thiazide diuretics hydrochlorothiazide (HTZ) or chlorothiazide (CTZ) is reported. Characterization of these new systems indicates formation of binary eutectic conglomerates, i.e., drug–drug eutectic solids (DDESs). Further analysis by construction of binary diagrams (DSC screening) exhibited the characteristic V-shaped form indicating formation of DDESs in both cases. These new DDESs were further characterized by different techniques, including thermal analysis (DSC), solid state NMR spectroscopy (SSNMR), powder X-ray diffraction (PXRD) and scanning electron microscopy–energy dispersive X-ray spectroscopy analysis (SEM–EDS). In addition, intrinsic dissolution rate experiments and solubility assays were performed. In the case of MET·HCl-HTZ (χ_MET·HCl = 0.66), we observed a slight enhancement in the dissolution properties compared with pure HTZ (1.21-fold). The same analysis for the solid forms of MET·HCl-CTZ (χ_MET·HCl = 0.33 and 0.5) showed an enhancement in the dissolved amount of CTZ accompanied by a slight improvement in solubility. From these dissolution profiles and saturation solubility studies and by comparing the thermodynamic parameters (ΔH_fus and ΔS_fus) of the pure drugs with these new solid forms, it can be observed that there was a limited modification in these properties, not modifying the free energy of the solution (ΔG) and thus not allowing an improvement in the dissolution and solubility properties of these solid forms.

Fundamental Concepts of Hydrogels: Synthesis, Properties, and Their Applications

In the present review, we focused on the fundamental concepts of hydrogels-classification, the polymers involved, synthesis methods, types of hydrogels, properties, and applications of the hydrogel. Hydrogels can be synthesized from natural polymers, synthetic polymers, polymerizable synthetic monomers, and a combination of natural and synthetic polymers. Synthesis of hydrogels involves physical, chemical, and hybrid bonding. The bonding is formed via different routes, such as solution casting, solution mixing, bulk polymerization, free radical mechanism, radiation method, and interpenetrating network formation. The synthesized hydrogels have significant properties, such as mechanical strength, biocompatibility, biodegradability, swellability, and stimuli sensitivity. These properties are substantial for electrochemical and biomedical applications. Furthermore, this review emphasizes flexible and self-healable hydrogels as electrolytes for energy storage and energy conversion applications. Insufficient adhesiveness (less interfacial interaction) between electrodes and electrolytes and mechanical strength pose serious challenges, such as delamination of the supercapacitors, batteries, and solar cells. Owing to smart and aqueous hydrogels, robust mechanical strength, adhesiveness, stretchability, strain sensitivity, and self-healability are the critical factors that can identify the reliability and robustness of the energy storage and conversion devices. These devices are highly efficient and convenient for smart, light-weight, foldable electronics and modern pollution-free transportation in the current decade.

Controlled delivery of the popular nonsteroidal anti-inflammatory drug, paracetamol, from chitosan-g-polyacrylamide microspheres prepared by the emulsion crosslinking technique

In this paper, chitosan-graft-polyacrylamide (CS-g-PAAm) microspheres as drug delivery matrices of paracetamol were prepared by the emulsion crosslinking technique, using glutaraldehyde (GA) as a crosslinker. Graft copolymer of chitosan with acrylamide was synthesized using cerium (IV) ammonium nitrate (CAN). The microspheres formed had average particle sizes in the range of 78-252 μm. Paracetamol entrapment efficiency was found to vary between 31.89% and 72.61%, as determined by UV spectroscopy. Drug release in acidic and phosphate buffer solutions (pH 1.2 and 7.4) of the CS-g-PAAm microspheres was influenced by formulation factors such as the concentration of CS-g-PAAm, the paracetamol/polymer ratio (w/w), and the amount of crosslinker.

Preparation of ferric ion crosslinked acrylamide grafted poly (vinyl alcohol)/sodium alginate microspheres and application in controlled release of anticancer drug 5-fluorouracil

Ionically crosslinked microspheres of acrylamide (AAm) grafted poly (vinyl alcohol) (PVA)/sodium alginate (NaAlg) were prepared by crosslinking with FeCl3 and 5-fluorouracil (5-FU), which is an anticancer drug and was successfully encapsulated into the microspheres. The graft copolymer (PVA-g-PAAm) was characterized by using Fourier transform infrared spectroscopy (FTIR) and elemental analysis. The prepared microspheres were characterized by FTIR and scanning electron microscopy (SEM). Microspheres were also characterized by particle diameter, equilibrium swelling values and release profiles. The release studies were carried out at three pH values 1.2, 6.8 and 7.4, respectively, each for 2 h. The effects of preparation conditions as PVA-g-PAAm/NaAlg ratio, drug/polymer ratio, crosslinker concentration and exposure time to FeCl3 on the release of 5-FU were investigated for 6 h at 37 °C. The highest 5-FU release was found to be as 99.57% (w/w) at the end of 6 h for PVA-g-PAAm/NaAlg ratio of 1:4 (w/w), drug/polymer ratio of 1:8 (w/w), crosslinker concentration of 0.05 M and exposure time of 10 min. The release results were also supported by the swelling measurements of the microspheres. Release kinetics was described by Fickian and non-Fickian approaches.

In vitro cytotoxicity and drug release properties of pH- and temperature-sensitive core-shell hydrogel microspheres

A simple method has been developed to prepare smart P(N,N-diethylacrylamide-co-methacrylic acid) (P(DEA-co-MAA)) microspheres that consist of well-defined temperature-sensitive cores and pH sensitive shells. The microgels have been prepared by surfactant-free emulsion polymerization using water as the solvent. The core-shell hydrogel microspheres have been characterized by Fourier transform infrared (FTIR) spectroscopy, UV spectrometry, dynamic light scattering (DLS) and transmission electron micrograph (TEM). Preliminary characterization of the biocompatibility of hydrogel microspheres has been done by the cytotoxicity assays using the HeLa human breast cancer cell line as probes. The in vitro drug release indicates that drug release rate, encapsulation efficiency (EE) and release kinetics depend upon the pH value and copolymer composition. According to this study, the hydrogel microspheres based on P(DEA-co-MAA) could serve as suitable candidate for drug site-specific carrier in intestine.