Modelling of wicking and moisture interactions of flax and viscose fibres

Nanocellulose-Based Hollow Fibers for Advanced Water and Moisture Management

Natural plant fibers such as cotton have favorable performance in water and moisture management; however, they suffer from inferior processing ability due to limited diameter and length, as well as natural defects. Although commercially available regenerated cellulose fibers such as lyocell fibers can have tunable structures, they rely on the complete dissolution of cellulose molecules, including the highly crystalline parts, leading to inferior mechanical properties. Through a specially designed coaxial wet-spinning process, we prepare a type of hollow fiber using only cellulose nanofibrils (CNFs) as building blocks. It mimics cotton fibers with a lumen structure but with a tunable diameter and a long length. Moreover, such hollow fibers have superior mechanical properties with a Young's modulus of 24.7 GPa and tensile strength of 341 MPa, surpassing lyocell fibers and most wet-spun CNF-based fibers. Importantly, they have 10 times higher wicking ability, wetting rate, drying rate, and maximum wetting ratio compared to lyocell fibers. Together with a superior long-term performance after 500 rounds of wetting-drying tests, such CNF-based hollow fibers are sustainable choices for advanced textile applications. And this study provides a greater understanding of nanoscale building blocks and their assembled macromaterials, which may help to reveal the magic hierarchical design of natural materials, in this case, plant fibers.

Imbibition of Liquids through a Paper Substrate in a Controlled Environment

Liquid spreading on open surfaces is a widely observed phenomenon. The physics of liquid spreading has become more complex when the surface is porous like paper or fabrics due to the evaporation of the liquid and swelling of the fibers. In this study, we have performed liquid imbibition experiments on paper strips in a controlled environment with and without using hydrophobic boundaries. The experimental results are compared to the existing analytical models that account for each effect separately. The existing models were found to be inaccurate in predicting the experimental results. We developed new analytical models by modifying existing models to predict the capillary rise of the liquid through the paper substrate accurately. Different effects, such as the barrier (hydrophobic boundary), evaporation, and swelling, are considered simultaneously while developing the modified models to mimic the exact practical situation for the first time. We discovered that the modified models predict the experimental results more accurately than the existing models. For cases with and without barriers, the final models considering several effects simultaneously predict the data with a maximum error range of 7 and 10%, respectively. Finally, we conducted capillary rise experiments with volatile (water) and non-volatile (silicon oil) liquids at various temperatures and under various relative humidity conditions to validate the analytical results.

A thread/fabric-based band as a flexible and wearable microfluidic device for sweat sensing and monitoring

Flexible biosensors for monitoring systems have emerged as a promising portable diagnostics platform due to their potential for in situ point-of-care (POC) analytic devices. Assessment of biological analytes in sweat can provide essential information for human physiology. Conventional measurements rely on laboratory equipment. This work exploits an alternative approach for epidermal sweat sensing and detection through a wearable microfluidic thread/fabric-based analytical device (μTFAD). This μTFAD is a flexible and skin-mounted band that integrates hydrophilic dot-patterns with a hydrophobic surface via embroidering thread into fabric. After chromogenic reaction treatment, the thread-embroidered patterns serve as the detection zones for sweat transferred by the hydrophilic threads, enabling precise analysis of local sweat loss, pH and concentrations of chloride and glucose in sweat. Colorimetric reference markers embroidered surrounding the working dots provide accurate data readout either by apparent color comparison or by digital acquirement through smartphone-assisted calibration plots. On-body tests were conducted on five healthy volunteers. Detection results of pH, chloride and glucose in sweat from the volunteers were 5.0-6.0, 25-80 mM and 50-200 μM by apparent color comparison with reference markers through direct visual observation. Similar results of 5.47-6.30, 50-77 mM and 47-66 μM for pH, chloride and glucose were obtained through calibration plots based on the RGB values from the smartphone app Lanse®. The limit of detection (LOD) is 10 mM for chloride concentration, 4.0-9.0 for pH and 10 μM for glucose concentration, respectively. For local sweat loss, it is found that the forehead is the region of heavy sweat loss. Sweat secretion is a cumulating process with a lower sweat rate at the beginning which increases as body movement continues along with increased heat production. These results demonstrate the capability and availability of our sensing device for quantitative detection of multiple biomarkers in sweat, suggesting the great potential for development of feasible non-invasive biosensors, with a similar performance to conventional measurements.

Conversion of wood-biopolymers into macrofibers with tunable surface energy via dry-jet wet-spinning

ABSTRACT

Surface chemistry of regenerated all-wood-biopolymer fibers that are fine-tuned by composition of cellulose, lignin and xylan is elucidated via revealing their surface energy and adhesion. Xylan additive resulted in thin fibers and decreased surface energy of the fiber outer surfaces compared to the cellulose fibers, or when lignin was used as an additive. Lignin increased the water contact angle on the fiber surface and decreased adhesion force between the fiber cross section and a hydrophilic probe, confirming that lignin reduced fiber surface affinity to water. Lignin and xylan enabled fiber decoration with charged groups that could tune the adhesion force between the fiber and an AFM probe. The fibers swelled in water: the neat cellulose fiber cross section area increased 9.2%, the fibers with lignin as the main additive 9.1%, with xylan 6.8%, and the 3-component fibers 5.5%. This indicates that dimensional stability in elevated humidity is improved in the case of 3-component fiber compared to 2-component fibers. Xylan or lignin as an additive neither improved strength nor elongation at break. However, improved deformability was achieved when all the three components were incorporated into the fibers.