Comparative study on the healing potential of chitosan, polymethylmethacrylate, and demineralized bone matrix in radial bone defects of rat

Chitosan as Bone Scaffold for Craniofacial Bone Regeneration: A Systematic Review

Background: The reconstruction of bone defect in the face and head is indispensable yet one of the most challenging procedure to date. Chitosan has emerged as a promising low-cost natural biopolymer for the bone scaffold as an alternative to surgery. This study aims to review the effectiveness of chitosan as a bone scaffold for craniofacial bone regeneration. Methods: This systematic review used Google Scholar and PubMed as database sources. Study selection using PRISMA diagram and Boolean operator to specify the study search. The quality assessment of the study used a checklist from Joanna Briggs Institute for experimental study. Result: We included 18 experimental studies, both in vivo and in vitro study—the in vivo study used animal subjects such as mice, goats and rabbits. The studies mostly used chitosan combined with other biomaterials such as demineralized bone matrix (DBM), genipin (GP), sodium alginate (SA), resveratrol (Res), polycaprolactone (PCL) and collagen, growth factor and stem cells such as bone morphogenic protein-2 (BMP-2), dental pulp stem cell (DPSC), and human umbilical cord mesenchymal stem cells (hUCMSC). Conclusion: Chitosan is a natural polymer with promising osteoconductive, osteoinductive and osteo-integrative effects in bone regeneration. Chitosan utilization for bone scaffolds combined with other biomaterials, growth factors, or stem cells gives better bone regeneration results than chitosan alone.

Comparison of osteogenesis of bovine bone xenografts between true bone ceramics and decalcified bone matrix

Xenograft bone scaffolds have certain advantages such as mechanical strength, osteoinductive properties, sufficient source and safety. This study aimed to compare osteogenesis of the two main bovine bone xenografts namely true bone ceramics (TBC) and decalcified bone matrix (DBM), and TBC or DBM combined with bone morphogenetic protein (BMP)-2 (TBC&BMP-2 and DBM&BMP-2). The characteristics of TBC and DBM were investigated by observing the appearance and scanning electron microscopic images, examining mechanical strength, evaluating cytotoxicity and detecting BMP-2 release after being combined with BMP-2 in vitro. The femoral condyle defect and radial defect models were successively established to evaluate the performance of the proposed scaffolds in repairing cortical and cancellous bone defects. General observation, hematoxylin and eosin (HE) staining, mirco-CT scanning, calcein double labeling, X-ray film observation, three-point bending test in vivo were then performed. It indicated that the repair with xenograft bone scaffolds of 8 weeks were needed and the repair results were better than those of 4 weeks whatever the type of defects. To femoral condyle defect, TBC and TBC&BMP-2 were better than DBM and DBM&BMP-2, and TBC&BMP-2 was better than TBC alone; to radial defect, DBM and DBM&BMP-2 were better than TBC and TBC&BMP-2, and DBM&BMP-2 was better than DBM alone. This study has shown that TBC and DBM xenograft scaffolds can be more suitable for the repair of cancellous bone and cortical bone defects for 8 weeks in rats, respectively. We also have exhibited the use of BMP-2 in combination with DBM or TBC provides the possibility to treat bone defects more effectively. We thus believe that we probably need to select the more suitable scaffold according to bone defect types, and both TBC and DBM are promising xenograft materials for bone tissue engineering and regenerative medicine. Graphical abstract.

The Effect of Mineralized Plasmatic Matrix and Chitosan on the Healing of Critical-Sized Mandibular Bone Defects in a Rabbit Model

Background: In maxillofacial surgery, critical size mandibular defects remain a challenging issue. There have been numerous attempts to improve mandibular defect healing. Recently, bone tissue engineering has provided many benefits in improving bone healing. Herein, we tried to investigate the effect of Mineralized plasmatic matrix (MPM) and Chitosan to enhance tissue healing and regeneration in mandibular bone defect. Methods: A mandibular bone defect of critical size was created in 45 New Zealand rabbits. There were three groups of rabbits: the MPM group, the Chitosan group, and the control group. Radiographical, histological, and immune histochemical evaluations were performed at 4, 8, and 12 post-operative weeks. Results: The MPM group demonstrated the highest degree of bone formation with uniform radio-opacity nearly like that of adjacent healthy parent tissue. While in the chitosan group, most of the defect area was filled with radio-opaque bone with persistent small radiolucent areas. The control group showed less bone formation than the MPM and chitosan group, with more radiolucent areas. Sections stained with (H&E) demonstrated an increase in osseous tissue formation in both the MPM and chitosan groups. Staining with Masson’s trichrome revealed an increase in fibrous connective tissue proliferation in both the MPM and chitosan groups. In both the MPM and chitosan groups, nuclear factor kappa p65 was downregulated, and matrix metalloproteinase-9 was upregulated. Conclusion: According to the current study, MPM and Chitosan may have beneficial effects on the healing of critical-sized mandibular bone defects.

Effects of Combination of BMP7, PFG, and Autograft on Healing of the Experimental Critical Radial Bone Defect by Induced Membrane (Masquelet) Technique in Rabbit

Background

Healing of large segmental bone defects can be challenging for orthopedic surgeons. This research was conducted to provide further insight into the effects of BMP7 in combination with autograft and platelet fibrin glue (PFG) on bone regeneration by Masquelet technique (MT).

Methods

Twenty five domestic male rabbits, more than 6 months old, weighing 2.00±0.25 kg were randomly divided into five equal groups as follows: MT-blank cavity (without any biological or synthetic materials) (1), blank cavity (2), MT-autograft (3), MT-autograft-BMP7 (4), and MT-BMP7-PFG (5). A 20 mm segmental defect was made in radial bone in both forelimbs. The Masquelet technique was done in all groups except group 2. The study was evaluated by radiology, biomechanics, histopathology and scanning electron microscopy.

Results

The results showed that Masquelet technique enhanced the healing process, as, the structural and functional criteria of the injured bone showed significantly improved bone healing (P<0.05). Treatment by PFG-BMP7, Autograft-BMP7, and autograft demonstrated beneficial effects on bone healing. However, Autograft-BMP7 was more effective than autograft in healing of the radial defect in rabbits.

Conclusion

Our findings introduce the osteogenic materials in combination with Masquelet technique as an alternative for reconstruction of the big diaphyseal defects in the long bones in animal models. Our findings may be useful for clinical application in future.

A novel gelatin/chitooligosaccharide/demineralized bone matrix composite scaffold and periosteum-derived mesenchymal stem cells for bone tissue engineering

Background

A novel biodegradable scaffold including gelatin (G), chitooligosaccharide (COS), and demineralized bone matrix (DBM) could play a significant part in bone tissue engineering. The present study aimed to investigate the biological characteristics of composite scaffolds in combination of G, COS, and DBM for in vitro cell culture and in vivo animal bioassays.

Methods

Three-dimensional scaffolds from the mixture of G, COS, and DBM were fabricated into 3 groups, namely, G, GC, and GCD using a lyophilization technique. The scaffolds were cultured with mesenchymal stem cells (MSCs) for 4 weeks to determine biological responses such as cell attachment and cell proliferation, alkaline phosphatase (ALP) activity, calcium deposition, cell morphology, and cell surface elemental composition. For the in vivo bioassay, G, GC, and GCD, acellular scaffolds were implanted subcutaneously in 8-week-old male Wistar rats for 4 weeks and 8 weeks. The explants were assessed for new bone formation using hematoxylin and eosin (H&E) staining and von Kossa staining.

Results

The MSCs could attach and proliferate on all three groups of scaffolds. Interestingly, the ALP activity of MSCs reached the greatest value on day 7 after cultured on the scaffolds, whereas the calcium assay displayed the highest level of calcium in MSCs on day 28. Furthermore, weight percentages of calcium and phosphorus on the surface of MSCs after cultivation on the GCD scaffolds increased when compared to those on other scaffolds. The scanning electron microscopy images showed that MSCs attached and proliferated on the scaffold surface thoroughly over the cultivation time. Mineral crystal aggregation was evident in GC and greatly in GCD scaffolds. H&E staining illustrated that G, GC, and GCD scaffolds displayed osteoid after 4 weeks of implantation and von Kossa staining confirmed the mineralization at 8 weeks in G, GC, and GCD scaffolds.

Conclusion

The MSCs cultured in GCD scaffolds revealed greater osteogenic differentiation than those cultured in G and GC scaffolds. Additionally, the G, GC, and GCD scaffolds could promote in vivo ectopic bone formation in rat model. The GCD scaffolds exhibited maximum osteoinductive capability compared with others and may be potentially used for bone regeneration.

Nanosilver-loaded PMMA bone cement doped with different bioactive glasses - evaluation of cytocompatibility, antibacterial activity, and mechanical properties

Nanosilver-loaded PMMA bone cement (BC-AgNp) is a novel cement developed as a replacement for conventional cements. Despite its favorable properties and antibacterial activity, BC-AgNp still lacks biodegradability and bioactivity. Hence, we investigated doping with bioactive glasses (BGs) to create a new bioactive BC characterized by time-varying porosity and gradual release of AgNp. The BC Cemex was used as the base material and modified simultaneously with the AgNp and BGs: melted 45S5 and 13-93B3 glasses with various particle sizes and sol-gel derived SiO₂/CaO microparticles. The effect of BG addition was examined by microscopic analysis, an assessment of setting parameters, wettability, FTIR and UV-VIS spectroscopy, mechanical testing, and hemo- and cytocompatibility and antibacterial efficiency studies. The results show that it is possible to incorporate various BGs into BC-AgNp, which leads to different properties depending on the type and size of BGs. The smaller particles of melted BGs showed higher porosity and better antibacterial properties with the moderate deterioration of mechanical properties. The sol-gel derived BGs, however, displayed a tendency for agglomeration and random distribution in BC-AgNp. The BGs with greater solubility more efficiently improve the antibacterial properties of BC-AgNp. Besides, the unreacted MMA monomer release could negatively influence the cellular response. Despite that, cements doped with different BGs are suitable for medical applications.

Role of bone 1stem cell-seeded 3D polylactic acid/polycaprolactone/hydroxyapatite scaffold on a critical-sized radial bone defect in rat

Osteoconductive biomaterials were used to find the most reliable materials in bone healing. Our focus was on the bone healing capacity of the stem cell-loaded and unloaded PLA/PCL/HA scaffolds. The 3D scaffold of PLA/PCL/HA was characterized by scanning electron microscopy (SEM), rheology, X-ray diffraction (XRD), and Fourier transform-infrared (FT-IR) spectroscopy. Bone marrow stem cells (BMSCs) have multipotential differentiation into osteoblasts. Forty Wistar male rats were used to organize four experimental groups: control, autograft, scaffold, and BMSCs-loaded scaffold groups. qRT-PCR showed that the BMSCs-loaded scaffold had a higher expression level of CD31 and osteogenic markers compared with the control group (P < 0.05). Radiology and computed tomography (CT) scan evaluations showed significant improvement in the BMSCs-loaded scaffold compared with the control group (P < 0.001). Biomechanical estimation demonstrated significantly higher stress (P < 0.01), stiffness (P < 0.001), and ultimate load (P < 0.01) in the autograft and BMSCs-loaded scaffold groups compared with the untreated group and higher strain was seen in the control group than the other groups (P < 0.01). Histomorphometric and immunohistochemical (IHC) investigations showed significantly improved regeneration scores in the autograft and BMSCs-loaded scaffold groups compared with the control group (P < 0.05). Also, there was a significant difference between the scaffold and control groups in all tests (P < 0.05). The results depicted that our novel approach will allow to develop PLA/PCL/HA 3D scaffold in bone healing via BMSC loading.

Native Bovine Hydroxyapatite Powder, Demineralised Bone Matrix Powder, and Purified Bone Collagen Membranes Are Efficient in Repair of Critical-Sized Rat Calvarial Defects

Here we evaluated the efficacy of bone repair using various native bovine biomaterials (refined hydroxyapatite (HA), demineralised bone matrix (DBM), and purified bone collagen (COLL)) as compared with commercially available bone mineral and bone autografts. We employed a conventional critical-sized (8 mm diameter) rat calvarial defect model (6-month-old male Sprague–Dawley rats, n = 72 in total). The artificial defect was repaired using HA, DBM, COLL, commercially available bone mineral powder, bone calvarial autograft, or remained unfilled (n = 12 animals per group). Rats were euthanised 4 or 12 weeks postimplantation (n = 6 per time point) with the subsequent examination to assess the extent, volume, area, and mineral density of the repaired tissue by means of microcomputed tomography and hematoxylin and eosin staining. Bovine HA and DBM powder exhibited excellent repair capability similar to the autografts and commercially available bone mineral powder while COLL showed higher bone repair rate. We suggest that HA and DBM powder obtained from bovine bone tissue can be equally applied for the repair of bone defects and demonstrate sufficient potential to be implemented into clinical studies.

Influence of several biodegradable components added to pure and nanosilver-doped PMMA bone cements on its biological and mechanical properties

Acrylic bone cements (BC) are wildly used in medicine. Despite favorable mechanical properties, processability and inject capability, BC lack bioactivity. To overcome this, we investigated the effects of selected biodegradable additives to create a partially-degradable BC and also we evaluated its combination with nanosilver (AgNp). We hypothesized that using above strategies it would be possible to obtain bioactive BC. The Cemex was used as the base material, modified at 2.5, 5 or 10 wt% with either cellulose, chitosan, magnesium, polydioxanone or tricalcium-phosphate. The resulted modified BC was examined for surface morphology, wettability, porosity, mechanical and nanomechanical properties and cytocompatibility. The composite BC doped with AgNp was also examined for its release and antibacterial properties. The results showed that it is possible to create modified cement and all studied modifiers increased its porosity. Applying the additives slightly decreased BC wettability and mechanical properties, but the positive effect of the additives was observed in nanomechanical research. The relatively poor cytocompatibility of modified BC was attributed to the unreacted monomer release, except for polydioxanone modification which increased cells viability. Furthermore, all additives facilitated AgNp release and increased BC antibacterial effectiveness. Our present studies suggest the optimal content of biodegradable component for BC is 5 wt%. At this content, an improvement in BC porosity is achieved without significant deterioration of BC physical and mechanical properties. Polydioxanone and cellulose seem to be the most promising additives that improve porosity and antibacterial properties of antibiotic or nanosilver-loaded BC. Partially-degradable BC may be a good strategy to improve their antibacterial effectiveness, but some caution is still required regarding their cytocompatibility. STATEMENT OF SIGNIFICANCE: The lack of bone cement bioactivity is the main limitation of its effectiveness in medicine. To overcome this, we have created composite cements with partially-degradable properties. We also modified these cements with nanosilver to provide antibacterial properties. We examined five various additives at three different contents to modify a selected bone cement. Our results broaden the knowledge about potential modifiers and properties of composite cements. We selected the optimal content and the most promising additives, and showed that the combination of these additives with nanosilver would increase cements` antibacterial effectiveness. Such modified cements may be a new solution for medical applications.

Nanomaterials for Periodontal Tissue Engineering: Chitosan-Based Scaffolds. A Systematic Review

Introduction. Several biomaterials are used in periodontal tissue engineering in order to obtain a three-dimensional scaffold, which could enhance the oral bone regeneration. These novel biomaterials, when placed in the affected area, activate a cascade of events, inducing regenerative cellular responses, and replacing the missing tissue. Natural and synthetic polymers can be used alone or in combination with other biomaterials, growth factors, and stem cells. Natural-based polymer chitosan is widely used in periodontal tissue engineering. It presents biodegradability, biocompatibility, and biological renewability properties. It is bacteriostatic and nontoxic and has hemostatic and mucoadhesive capacity. The aim of this systematic review is to obtain an updated overview of the utilization and effectiveness of chitosan-based scaffold (CS-bs) in the alveolar bone regeneration process. Materials and Methods. During database searching (using PubMed, Cochrane Library, and CINAHL), 72 items were found. The title, abstract, and full text of each study were carefully analyzed and only 22 articles were selected. Thirteen articles were excluded based on their title, five after reading the abstract, twenty-six after reading the full text, and six were not considered because of their publication date (prior to 2010). Quality assessment and data extraction were performed in the twelve included randomized controlled trials. Data concerning cell proliferation and viability (CPV), mineralization level (M), and alkaline phosphatase activity (ALPA) were recorded from each article Results. All the included trials tested CS-bs that were combined with other biomaterials (such as hydroxyapatite, alginate, polylactic-co-glycolic acid, polycaprolactone), growth factors (basic fibroblast growth factor, bone morphogenetic protein) and/or stem cells (periodontal ligament stem cells, human jaw bone marrow-derived mesenchymal stem cells). Values about the proliferation of cementoblasts (CB) and periodontal ligament cells (PDLCs), the activity of alkaline phosphatase, and the mineralization level determined by pure chitosan scaffolds resulted in lower than those caused by chitosan-based scaffolds combined with other molecules and biomaterials. Conclusions. A higher periodontal regenerative potential was recorded in the case of CS-based scaffolds combined with other polymeric biomaterials and bioceramics (bio compared to those provided by CS alone. Furthermore, literature demonstrated that the addition of growth factors and stem cells to CS-based scaffolds might improve the biological properties of chitosan.

In Vitro Evaluation of a Novel Osteo-Inductive Scaffold for Osteogenic Differentiation of Bone-Marrow Mesenchymal Stem Cells

BACKGROUND

Demineralized bone matrices (DBMs) were demonstrated to be a promising candidate for bone regeneration by previous studies. However, the limited osteoinductivity of DBMs was insufficient for a better repairing of bone defect. Osteoblasts (OBs), the major cellular component of bone tissues, play an important role in the formation of new bone. The extracellular matrix (ECM) of OB is one of the main components of bone formation niche.

OBJECTIVE

To combine the DBMs with the ECM of OBs to construct a novel scaffold that could be used for bone reconstruction.

METHODS

In this study, OBs were cultured on the surface of DBMs for 10 days and removed by Triton X-100 and ammonium hydroxide to prepare the OBs-ECM-DBMs (OEDBMs). A series of material features such as residues of OBs and ECM, cytotoxity, and osteoinductive capability of OEDBMs were evaluated.

RESULTS

Low cell residues and low content of DNA were observed in OEDBMs. Compared with DBMs, OEDBMs possessed more bone tissues organic matrix proteins, such as osteocalcin, osteopontin, and collagen I. Rat bone marrow mesenchymal stem cells (rBMSCs) presented a good viability when cultured on both 2 materials. The significant upregulations of osteogenic genes and proteins of rBMSCs were observed in OEDBMs group compared with DBMs group.

CONCLUSION

Taken together, these findings suggested that the OB-secreted ECM may be qualified as an ideal modification method for enhancing the performance of engineered bone scaffold.

The assessment of xenogeneic bone immunotoxicity and risk management study

Background

Xenogeneic bone has been widely used in a variety of clinical bone-related disease to promote bone healing and restore bone defects. However, the adverse effects of immune system limit its application in the clinic. The aim of this study was to evaluate xenogeneic bone safety of immunotoxicity and explore the methods for immune risk supervision.

Results

Xenogeneic bone, which is freeze-dried bovine cancellous bone, was implanted into the muscle of mice. On day 7, 14 and 28, the effects of xenogeneic bone were examined on humoral immunity and cellular immunity, including the levels of IgG, IgM, C3, inflammatory factors (TNF-α, IL-6), alkaline phosphatase (ALP) and the lymphocyte phenotype. The data showed that xenogeneic bone implantation had no potential to induce immune responses not only in humoral immunity but also in cellular immunity. To reveal the risk of immunogenicity, the residual DNA and the clearance of α-gal epitope were analyzed in 2 different bones (bone 1 is deproteinized bone, bone 2 is acellular and defatted bone). It was suggested that DNA of xenogeneic bone can be limited to < 50 ng per mg dry weight for the repair or regeneration with the acceptable immune risk. And α-gal clearance of xenogeneic bone could be an effective risk factor for improving xenograft quality management.

Conclusions

Through the detection of xenogeneic bone immunotoxicity, our findings indicated that the supervisions of risk factors could contribute to reduce the immune risk. And the risk factors under the acceptable limitation could decrease or replace animal experiment. However, it still needs to be studied on the limitation of α-gal epitope to predict rejection of xenogeneic bone more accurately.

Fracture Non-Union: A Review of Clinical Challenges and Future Research Needs

Non-union of bone following fracture is an orthopaedic condition with a high morbidity and clinical burden. Despite its estimated global prevalence of nine million annually, the limit of bone regeneration therapy still results in patients living with pain, a reduced quality of life and associated psychological, social and financial repercussions. This review provides an overview of the current epidemiological and aetiological data, and highlights where the clinical challenges in treating non-union lie. Current treatment strategies are discussed as well as promising future research foci. Development in biotechnologies to treat non-union provides exciting scope for more effective treatment for this debilitating condition.

Peptide LL-37 coating on micro-structured titanium implants to facilitate bone formation in vivo via mesenchymal stem cell recruitment

Titanium (Ti) and Ti-alloys were widely used in clinic orthopedics, however, the insufficient bone formation surrounding Ti-based implants still limited their biological performances. Surface modification of Ti substrates is essential to improve their interactions with bone-forming cells and bone tissue. In this study, we modified Ti substrates by coating peptide LL-37 onto micro-structured Ti substrates and aimed to (i) induce mesenchymal stem cells (MSCs) migration both in vitro and in vivo, (ii) facilitate osteogenic differentiation of MSCs and new bone formation. The surface micro-structured Ti substrates with hydroxyapatite deposition were fabricated by a two-step method including micro-arc oxidation (MAO) and hydrothermal treatment. LL-37 was loaded on micro-structured Ti substrates with the assistance of polydopamine coating. We confirmed that surface-modified Ti substrates benefited viability, adhesion, migration and osteogenic differentiation of MSCs in vitro. In a femur-defect rat model, the surface-modified Ti implants effectively induced CD29⁺/CD90⁺ positive cells migration in one week after implantation. According to the results of H&E, Masson's trichrome staining and immunohistochemical staining of OCN, OPN and collagen I, the targeted Ti implants exhibited significant new bone formation after implantation for 4 weeks. These results indicate that the surface modification of Ti samples facilitated bone formation through MSCs recruitment. STATEMENT OF SIGNIFICANCE: The inherent surface bioinertness of titanium (Ti) and Ti-alloys still limits their biological performances in clinical applications. Recently, the strategy of mesenchymal stem cells (MSCs) recruitment has been proposed to improve the osteointegration of bone implants. Herein, we reports the surface modification of Ti implants from the point of MSCs recruitment. Peptide LL-37 was coated on micro-structured Ti substrates to (i) recruit MSCs, (ii) regulate bio-physiological performance of MSCs, and (iii) facilitate bone formation in vivo. Our results improve the understanding of the interaction between Ti implants and MSCs, and provide a promising strategy of MSCs recruitment in the design of bone repair related biomaterials.

Propolis extract a new reinforcement material in improving bone healing: An in vivo study

BACKGROUND

Propolis is known for its antioxidant, immune response modulating, and wound healing effects. In the present study in order to determine the bone healing capacity of the propolis extract, a critical sized, nonunion, radial bone defect model was repaired in rat, using chitosan and demineralized bone matrix (DBM) scaffolds along with propolis extract.

MATERIALS AND METHODS

Seventy-two radial bone defects in 36 healthy male rats were randomly divided into 6 groups (n = 12/group). The groups included autograft, defect or untreated group, chitosan, DBM, chitosan and propolis (chitosan-propolis), and DBM and propolis (DBM-propolis). The bone repairing capability was characterized using radiography at 28th, 42nd and 56th postoperative days. Gross morphologic, histopathologic, histomorphometric and biomechanical examinations were performed following euthanasia at the 56th post-operative day.

RESULTS

The DBM-propolis group, showed better structural and biomechanical properties compared to the untreated, DBM, chitosan and chitosan-propolis groups. The defect site in the chitosan and untreated groups were mainly restored by fibrous connective tissue while the lesions in the autograft group were mostly filled by cartilage and a lesser amount of woven bone. The woven bone, and the hyaline cartilage were the main constituents of the newly formed tissues in the DBM-propolis group, at the 56th day after injury.

CONCLUSION

The results of this study showed that percutaneous injection of diluted aqueous propolis extract in the bone defect (25 mg/defect) can improve bone formation in the critical radial bone defect in rat. Since there was no significant difference between the autograft and DBM-propolis group, probably this therapeutic strategy has high potential in augmentation of autologous bone grafting.

Synergistic effect of strontium, bioactive glass and nano-hydroxyapatite promotes bone regeneration of critical-sized radial bone defects

Critical-sized bone defects constitute a major health issue in orthopedics and usually cause mal-unions due to an inadequate number of migrated progenitor cells into the defect site or their incomplete differentiation into osteogenic precursor cells. The current study aimed to develop an optimized osteoinductive and angiogenic scaffold by incorporation of strontium (Sr) and bioglass (BG) into gelatin/nano-hydroxyapatite (G/nHAp) seeded with bone marrow mesenchymal stem cells to enhance bone regeneration. The scaffolds were fabricated by a freeze-drying technique and characterized in terms of morphology, structure, porosity and degradation rate. The effect of fabricated scaffolds on cell viability, attachment and differentiation into osteoblastic lineages was evaluated under in vitro condition. Micro computed tomography scan, histological and histomorphometric analysis were performed after implantation of scaffolds into the radial bone defects in rat. RT-PCR analysis showed that G/nHAp/BG/Sr scaffold significantly increased the expression level of osteogenic and angiogenic markers in comparison to other groups (P < 0.05). Moreover, the defects treated with the BMSCs-seeded scaffolds showed superior bone formation and mechanical properties compared to the cell-free scaffolds 4 and 12 weeks post-implantation. Finally, the BMSCs-seeded G/nHAp/BG/Sr scaffold showed the greatest bone regenerative capacity which was more similar to autograft. It is concluded that combination of Sr, BG, and nHAp can synergistically enhance the bone regeneration process. In addition, our results demonstrated that the BMSCs have the potential to considerably increase the bone regeneration ability of osteoinductive scaffolds. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 107B: 50-64, 2019.