Carboxymethyl guar gum synthesis in homogeneous phase and macroporous 3D scaffolds design for tissue engineering

Overcoming Chemical and Mechanical Instabilities in Lithium Metal Anodes with Sustainable and Eco-Friendly Artificial SEI Layer

Construction of a robust artificial solid-electrolyte interphase (SEI) layer has proposed an effective strategy to overcome the instability of the lithium (Li). However, existing artificial SEI layers inadequately controlled ion distribution, leading to dendritic growth and penetration. Furthermore, the environmental impact of the manufacturing process and materials of the artificial layer is often overlooked. In this work, a chemically and physically reinforced membrane (C-Li@P) composed of the biocompatible Li+ coordinated carboxymethyl guar gum (CMGG) and polyacrylamide (PAM) polymers serves as an artificial SEI membrane for dendrite-free Li. This membrane with hollow channels not only directs ion flux along the interspace of fibers, fostering uniform Li plating but also induces a desirable interface chemistry. Consequently, artificial SEI membrane-covered Li exhibits stable electrochemical plating/stripping reactions, surpassing the cycle life of ≈750% of bare Li. It demonstrates exceptional capacity retention of ≈93.9%, ≈88.1%, and ≈79.18% in full cells paired with LiNi0.8Mn0.1Co0.1O2 (NMC811), LiNi0.6Mn0.2Co0.2O2 (NMC622) and S cathodes, respectively over 200 cycles at 1 C rate. Additionally, the water-based green manufacturing and biodegradability of the membrane demonstrated the sustainable development and disposal of electrodes. This work provides a comprehensive framework for the design of an artificial layer chemically and physically regulating dendritic growth.

Recent advances in scaffolding biomaterials for cultivated meat

The emergence of cultivated meat provides a sustainable and ethical alternative to traditional animal agriculture, highlighting its increasing importance in the food industry. Biomaterial scaffolds are critical components in cultivated meat production for enabling cell adhesion, proliferation, differentiation, and orientation. While there's extensive research on scaffolding biomaterials, applying them to cultivated meat production poses distinct challenges, with each material offering its own set of advantages and disadvantages. This review summarizes the most recent scaffolding biomaterials used in the last five years for cell-cultured meat, detailing their respective advantages and disadvantages. We suggest future research directions and provide recommendations for scaffolds that support scalable, cost-effective, and safe high-quality meat production. Additionally, we highlight commercial challenges cultivated meat faces, encompassing bioreactor design, cell culture mediums, and regulatory and food safety issues. In summary, this review provides a comprehensive guide and valuable insights for researchers and companies in the field of cultivated meat production.

Plant-based Biomass/Polyvinyl Alcohol Gels for Flexible Sensors

Flexible sensors show great application potential in wearable electronics, human-computer interaction, medical health, bionic electronic skin and other fields. Compared with rigid sensors, hydrogel-based devices are more flexible and biocompatible and can easily fit the skin or be implanted into the body, making them more advantageous in the field of flexible electronics. In all designs, polyvinyl alcohol (PVA) series hydrogels exhibit high mechanical strength, excellent sensitivity and fatigue resistance, which make them promising candidates for flexible electronic sensing devices. This paper has reviewed the latest progress of PVA/plant-based biomass hydrogels in the construction of flexible sensor applications. We first briefly introduced representative plant biomass materials, including sodium alginate, phytic acid, starch, cellulose and lignin, and summarized their unique physical and chemical properties. After that, the design principles and performance indicators of hydrogel sensors are highlighted, and representative examples of PVA/plant-based biomass hydrogel applications in wearable electronics are illustrated. Finally, the future research is briefly prospected. We hope it can promote the research of novel green flexible sensors based on PVA/biomass hydrogel.

Carboxymethylated Gums and Derivatization: Strategies and Significance in Drug Delivery and Tissue Engineering

Natural polysaccharides have been widely exploited in drug delivery and tissue engineering research. They exhibit excellent biocompatibility and fewer adverse effects; however, it is challenging to assess their bioactivities to that of manufactured synthetics because of their intrinsic physicochemical characteristics. Studies showed that the carboxymethylation of polysaccharides considerably increases the aqueous solubility and bioactivities of inherent polysaccharides and offers structural diversity, but it also has some limitations that can be resolved by derivatization or the grafting of carboxymethylated gums. The swelling ratio, flocculation capacity, viscosity, partition coefficient, metal absorption properties, and thermosensitivity of natural polysaccharides have been improved as a result of these changes. In order to create better and functionally enhanced polysaccharides, researchers have modified the structures and properties of carboxymethylated gums. This review summarizes the various ways of modifying carboxymethylated gums, explores the impact that molecular modifications have on their physicochemical characteristics and bioactivities, and sheds light on various applications for the derivatives of carboxymethylated polysaccharides.

A review on challenges and issues with carboxymethylation of natural gums: The widely used excipients for conventional and novel dosage forms

Diverse properties of natural gums have made them quite useful for various pharmaceutical applications. However, they suffer from various problems, including unregulated hydration rates, microbial degradation, and decline in viscosity during warehousing. Among various chemical procedures for modification of gums, carboxymethylation has been widely studied due to its simplicity and efficiency. Despite the availability of numerous research articles on natural gums and their uses, a comprehensive review on carboxymethylation of natural gums and their applications in the pharmaceutical and other biomedical fields is not published until now. This review outlines the classification of gums and their derivatization methods. Further, we have discussed various techniques of carboxymethylation, process of determination of degree of substitution, and functionalization pattern of substituted gums. Detailed information about the application of carboxymethyl gums as drug delivery carriers has been described. The article also gives a brief account on tissue engineering and cell delivery potential of carboxymethylated gums.

Bio nanocomposites of graphene oxide with carboxymethyl guargum: fabrication and characterization and application for type 1 diabetes

Islet cells transplantation has limitations like low survivability, which can be overcome by using extracellular matrix mimicking three-dimensional (3D) scaffolds, which supports the growth and proliferation of seeded cells. This study was aimed to investigate the role of novel 3D carboxymethyl guargum (CMGG) nanocomposite with reduced graphene oxide (rGO) for proliferation of pancreatic islet cells (RIN-5F) and rate of insulin secretion of RIN-5F cells. Scanning electron microscope and Fourier transform infrared results have demonstrated good porosity and the chemical interactions between CMGG and rGO. Mechanical testing and thermogravimetric analysis of nanofibers have shown good tensile strength and thermal stability with rGO in the nanocomposite. These scaffolds demonstratedin vitrobiocompatibility with acceptable ranges of biodegradability and hemocompatibility. Thein vitrocell proliferation and viability of RIN-5F cells on 3D CMGG nanofibers have significantly increased compared to two-dimensional (2D) cell control. Moreover, the glucose dependent insulin secretion of RIN-5F cells on CMGG nanocomposite has significantly increased upto 4-5 folds than cells on 2D cell control. The biomaterials used in this 3D nanofiber scaffold have shown to be biodegradable and hemocompatible and can be a promising platform for the proliferation and secretion of insulin from beta cells and can be effectively used in transplantation type-1 diabetes.

Nanofibrous scaffolds of carboxymethyl guargum potentiated with reduced graphene oxide for in vitro and in vivo wound healing applications

Nanofiber scaffolds mimic the extracellular matrix (ECM) and help in fibroblasts proliferation which is the main constituent for wound healing. This study aims to evaluate the wound healing potential of electrospun nanofibers fabricated by carboxymethyl guargum (CMGG), reduced graphene oxide (rGO) and polyvinyl alcohol. The nanofibers have shown desired properties like excellent porosity and good water holding capacities. The porosity of nanofibers helps in the movement of oxygen to cells and the removal of waste materials and the swelling capacity helps to maintain the moisture content at the wound site. In addition, the in vitro hemocompatibility and wound healing assay have shown excellent results rendering the nanofibers biocompatible. The in vitro fibroblasts (3T3-L1) proliferation was significantly more in rGO/CMGG/PVA nanofibers than CMGG/PVA and cell control. Further, the in vivo wound healing evaluation of these nanofiber dressings in rabbits has shown significant wound closure compared to control and standard. Histology studies revealed the fast collagen formation and re-epithelialization necessary for wound healing among rGO/CMGG/PVA treated rabbits. Therefore, the rGO/CMGG/PVA nanofiber scaffolds can be potential wound dressing candidates and be further evaluated for clinical use.

Bioengineering for curcumin loaded carboxymethyl guargum/reduced graphene oxide nanocomposites for chronic wound healing applications

Biomimetic scaffolds engineering for improved collagen, epithelial cutaneous and fibrous tissue regeneration remains challenging for wound healing. To address these issues, this study aimed to report on the fabrication and characterization of electrospun of carboxymethyl guargum (CMGG), reduced graphene oxide (rGO) nanocomposite dressings loaded with curcumin for chronic wound healing applications. SEM and XRD examined the morphology of nanofibers and resulted in excellent porosity. TGA and FT-IR were done, which revealed the nanofibers' thermal and chemical interactions. CMGG, rGO nanocomposite with curcumin was investigated for in-vitro wound healing assay by scratch wound healing model using 3T3 L1 fibroblast cell lines and conducted in vitro drug-releasing studies. These nanocomposites showed 100% wound closure by the proliferation of fibroblast cell lines 3T3-L1 within 48 h and showed controlled drug release. Further, in vivo results also showed that the CMGG, rGO nanocomposite with curcumin has the potential wound healing effects. Histological studies showed that the CMGG, rGO nanocomposite with curcumin has the potential for wound healing, which indicates that the biomimetic CMGG nanofibers have an excellent healing effect on chronic wounds.

Diffusion of water and protein drug in 1,4-butanediol diglycidyl ether crosslinked galactomannan hydrogels and its correlation with the physicochemical properties

The aim of the present study was to obtain a better and safer galactomannan-based material for drug release applications. A novel epoxy-crosslinked galactomannan hydrogel (EGH) was prepared from guar gum using 1,4-butanediol diglycidyl ether as a crosslinking agent. The diffusion rate constant of water molecules in freeze-dried EGH positively correlated with water uptake/equilibrium swelling rate (WU/ESR), and the water molecules participated in Fickian diffusion. The ESR, WU/ESR, and bovine serum albumin (BSA) loading capacity of a customized EGH with a crosslinking density of 48.9% were 48.7 ± 0.15 g/g, 95.3%, and 56.4 mg/g, respectively. The release of BSA from freeze-dried EGH was affected by the WU/ESR and the pH; the release equilibrium time was ~40 h at pH 1.2, decreasing to ~24 h at pH 7.4. Furthermore, the cumulative release rate increased from 63.5% to 80.7% and the t₅₀ decreased from 59 to 41 min upon changing from the acidic to basic pH. The release process conformed to the Ritger-Peppas and Hixson-Crowell models, and represented Fickian diffusion and chain relaxation. The EGH showed no cytotoxicity toward HeLa cells. Together, these results demonstrate the properties of a novel galactomannan-based hydrogel that can potentially be employed as a vehicle for drug delivery.

Integrating biomaterials and food biopolymers for cultured meat production

Cultured meat has recently achieved mainstream prominence due to the emergence of societal and industrial interest. In contrast to animal-based production of traditional meat, the cultured meat approach entails laboratory cultivation of engineered muscle tissue. However, bioengineers have hitherto engineered tissues to fulfil biomedical endpoints, and have had limited experience in engineering muscle tissue for its post-mortem traits, which broadly govern consumer definitions of meat quality. Furthermore, existing tissue engineering approaches face fundamental challenges in technical feasibility and industrial scalability for cultured meat production. This review discusses how animal-based meat production variables influence meat properties at both the molecular and functional level, and whether current cultured meat approaches recapitulate these properties. In addition, this review considers how conventional meat producers employ exogenous biopolymer-based meat ingredients and processing techniques to mimic desirable meat properties in meat products. Finally, current biomaterial strategies for engineering muscle and adipose tissue are surveyed in the context of emerging constraints that pertain to cultured meat production, such as edibility, sustainability and scalability, and potential areas for integrating biomaterials and food biopolymer approaches to address these constraints are discussed. STATEMENT OF SIGNIFICANCE: Laboratory-grown or cultured meat has gained increasing interest from industry and the public, but currently faces significant impediment to market feasibility. This is due to fundamental knowledge gaps in producing realistic meat tissues via conventional tissue engineering approaches, as well as translational challenges in scaling up these approaches in an efficient, sustainable and high-volume manner. By defining the molecular basis for desirable meat quality attributes, such as taste and texture, and introducing the fundamental roles of food biopolymers in mimicking these properties in conventional meat products, this review aims to bridge the historically disparate fields of meat science and biomaterials engineering in order to inspire potentially synergistic strategies that address some of these challenges.

Fabrication and characterization of carboxymethyl guar gum nanocomposite for application of wound healing

Bio scaffolds used for cutaneous tissue regeneration is a challenging issue in the healthcare system. To help this problem, we aimed to report on fabrication and characterization of citric acid cross-linked carboxymethyl guar gum (CMGG) nanocomposite films loaded with ciprofloxacin for faster wound healing application. Differential scanning calorimeter (DSC) and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy studies, dynamic light scattering (DLS), scanning electron microscopy (SEM) and X-ray diffraction (XRD) were used as analytical techniques for characterization of the nanocomposite film. The morphological characters of nanocomposite film were determined by SEM. The prepared scaffolds were evaluated for the carboxyl content and swelling ratio. Ciprofloxacin was loaded into scaffold and drug release was studied at pH 7.4. The hemolysis assay was used to study the biocompatibility of scaffold films. The formation of ester cross-links between citric acid and CMGG was confirmed by DSC and ATR- FTIR. The total carboxyl content of scaffold was found to be decreased when the amount of CMGG was increased. The swelling of scaffold film was found to be decreased with increase in curing temperature and time. CMGG scaffold films showed high drug loading with non-Fickian release mechanism suggesting controlled release of drug. In vivo wound healing studies were carried out for 5 days. In this study we observed a faster wound healing effect within 5 days by incorporation of ciprofloxacin in the CMGG film and found biocompatible. Hence, these Nanocomposite films show greater potential in treating wounds.

Facile Access to Guar Gum Based Supramolecular Hydrogels with Rapid Self-Healing Ability and Multistimuli Responsive Gel-Sol Transitions

In this work, we prepare guar gum-based supramolecular hydrogel through the formation of borate/didiol bonds. This dynamic and reversible noncovalent borate/didiol interaction is critical for the multifunctional properties of supramolecular hydrogel. The FT-IR and XRD analysis verified the existence of boronate ester interactions between borax and guar gum. Moreover, the viscoelastic and mechanical behaviors of the hydrogels with different guar gum concentrations showed that the storage modulus and compressive stress were highest at guar gum concentration of 2 wt %. Besides, due to the dynamic and reservable properties of boronate ester, these guar gum-based hydrogels had excellent self-healing property, outstanding reformable and injectable capability. In addition, hydrogels also exhibited reversible gel-sol transformations by the application of physicochemical stimuli such as thermal and pH value. The coupling of these multifunctional properties made from low-cost, environment friendly, and readily available materials could have potential applications in many biomedical areas in the future. We expect that this simple strategy of fabricating the self-healing guar gum hydrogels with multistimuli responsive properties may enrich the avenue in the exploration of multifunctional guar gum based hydrogels to expand their potential applications in various fields.

Non-thermal plasma assisted surface nano-textured carboxymethyl guar gum/chitosan hydrogels for biomedical applications

Smart hydrogels comprising carboxymethyl guar gum and chitosan (CMGG/CS) have been fabricated using tetraethyl orthosilicate as the crosslinker. To render the hydrogels an improved biological efficacy, non-thermal plasma assisted surface modification have been performed using Ar, O2 and a mixture of Ar and O2 gases. Enhanced surface wettability was witnessed post-plasma treatment. AFM analyses revealed the topographical changes of the hydrogels at the nano-scale level without any adverse effect on their bulk physical structure. The hydrogels exhibited pH-responsive swelling with maximum swelling in neutral pH. The release of diclofenac sodium from the hydrogels confirmed their potential towards colon-targeted drug delivery. Excellent biofilm eradication features against E. coli was demonstrated by the hydrogels. Hemolytic assay on human RBCs affirmed their hemocompatibility. Moreover, the hydrogels were found to be remarkably biodegradable. Thus, non-thermal plasma assisted surface nano-textured CMGG/CS hydrogels can be efficaciously explored for their diverse applications in biomedicine.

Improvement of anti-washout property of calcium phosphate cement by addition of konjac glucomannan and guar gum

The inferior anti-washout property of injectable calcium phosphate cement (CPC) limits its wider application in clinic. In this study, the improvement of anti-washout performance of CPC by addition of konjac glucomannan or guar gum, which was dissolved in the CPC liquid, was first studied. The influence of KGM/GG blend with different mass ratios on the anti-washout property, compressive strength and in vitro cytocompatibility of CPC was estimated. The results revealed that small amount of KGM or GG could obviously enhance the anti-washout property of CPC. Moreover, the washout resistance efficiency of KGM/GG blend was better than KGM or GG alone. The addition of KGM/GG blend slightly shortened the final setting time of CPC. Although the introduction of KGM/GG blend reduced the compressive strength of CPC, the compressive strength still reached or surpassed that of human cancellous bone. The best KGM/GG mass ratio was 5:5, which was most efficient at not only reducing CPC disintegration, but also increasing compressive strength. The addition of KGM/GG blend obviously promoted the cells proliferation on the CPC. In short, the CPC modified by KGM/GG blend exhibited excellent anti-washout property, appropriate setting time, adequate compressive strength, and good cytocompatibility, and has the potential to be used in bone defect repair. The addition of KGM/GG blend significantly improved the anti-washout property of CPC. The best KGM/GG mass ratio was 5:5, which was most efficient in reducing the CPC disintegration.