Effect of vitamin derivatives on gelation rate and gel strength of methylcellulose

Polysaccharide-based hydrogels for atopic dermatitis management: A review

Atopic dermatitis (AD) is the most common form of eczema and the most burdensome skin disease globally, affecting nearly 223 million. A major AD predisposition is genetic susceptibility, affecting skin barrier integrity and cell-mediated immunity. Manifesting as red, dry, and itchy skin, basic treatment involves skin hydration with emollients. Despite their effectiveness, poor patient compliance remains a major drawback. In severe cases, medicated emollients are used, but carry risks, including skin thinning, and immunosuppression. Hence, hydrogels have emerged as a promising alternative for AD management based on their ability to improve skin hydration, attributed to their hydrophilicity and high water retention capacity. Moreover, researchers have loaded hydrogels with various compounds for AD management; they also hold the potential to reduce systemic side effects of commercial drugs by enhancing dermal retention. Hydrogels address the challenges of patient compliance based on their non-greasy texture and reduced application frequency. Their appeal also stems from their versatility, as they can be fabricated from varying polymers. Due to their abundance, this review focuses on polysaccharides including alginate, cellulose, chitosan, and hyaluronic acid, which are preferred for fabricating natural and modified natural hydrogels for AD. It also briefly explores hydrogel application methods and key AD models.

Physicochemical Properties, Drug Release and In Situ Depot-Forming Behaviors of Alginate Hydrogel Containing Poorly Water-Soluble Aripiprazole

The objective of this study was to investigate the physicochemical properties, drug release and in situ depot-forming behavior of alginate hydrogel containing poorly water-soluble aripiprazole (ARP) for achieving free-flowing injectability, clinically accessible gelation time and sustained drug release. The balanced ratio of pyridoxal phosphate (PLP) and glucono-delta-lactone (GDL) was crucial to modulate gelation time of the alginate solution in the presence of calcium carbonate. Our results demonstrated that the sol state alginate hydrogel before gelation was free-flowing, stable and readily injectable using a small 23 G needle. In addition, the ratio (w/w) of PLP and GDL altered the gelation time, which was longer as the PLP content increased but shorter as the GDL content increased. The alginate hydrogel with a ratio of PLP to GDL of 15:9 had the optimal physicochemical properties in terms of a clinically acceptable gelation time (9.1 min), in situ-depot formation with muscle-mimicking stiffness (3.55 kPa) and sustained release over a two-week period. The alginate hydrogel, which is tunable by varying the ratio of PLP and GDL, could provide a controllable pharmaceutical preparation to meet the need for long-acting performance of antipsychotic drugs like ARP.

Preparation, thermal response mechanisms and biomedical applications of thermosensitive hydrogels for drug delivery

INTRODUCTION

Drug treatment is one of the main ways of coping with disease today. For the disadvantages of drug management, thermosensitive hydrogel is used as a countermeasure, which can realize the simple sustained release of drugs and the controlled release of drugs in complex physiological environments.

AREAS COVERED

This paper talks about thermosensitive hydrogels that can be used as drug carriers. The common preparation materials, material forms, thermal response mechanisms, characteristics of thermosensitive hydrogels for drug release and main disease treatment applications are reviewed.

EXPERT OPINION

When thermosensitive hydrogels are used as drug loading and delivery platforms, desired drug release patterns and release profiles can be tailored by selecting raw materials, thermal response mechanisms, and material forms. The properties of hydrogels prepared from synthetic polymers will be more stable than natural polymers. Integrating multiple thermosensitive mechanisms or different kinds of thermosensitive mechanisms on the same hydrogel is expected to realize the spatiotemporal differential delivery of multiple drugs under temperature stimulation. The industrial transformation of thermosensitive hydrogels as drug delivery platforms needs to meet some important conditions.

Nanomaterials based on thermosensitive polymer in biomedical field

The progress of nanotechnology enables us to make use of the special properties of materials on the nanoscale and open up many new fields of biomedical research. Among them, thermosensitive nanomaterials stand out in many biomedical fields because of their “intelligent” behavior in response to temperature changes. However, this article mainly reviews the research progress of thermosensitive nanomaterials, which are popular in biomedical applications in recent years. Here, we simply classify the thermally responsive nanomaterials according to the types of polymers, focusing on the mechanisms of action and their advantages and potential. Finally, we deeply investigate the applications of thermosensitive nanomaterials in drug delivery, tissue engineering, sensing analysis, cell culture, 3D printing, and other fields and probe the current challenges and future development prospects of thermosensitive nanomaterials.

Multifunctional and thermoresponsive methylcellulose composite hydrogels with photothermal effect

Multifunctional and thermoresponsive hydrogels can be used as soft materials in various medical applications, such as beauty devices, drug delivery, and near-infrared (NIR) lasers. In this study, methylcellulose (MC) composite hydrogels containing tannic acid (TA) and Fe³⁺ were prepared via a simple, fast process. The MC composite hydrogel contains hydrogen bonds between the MC polymer and TA and coordination bonds between TA and Fe³⁺, without losing the reversible thermogelation properties of the MC polymer. The gelation rates and mechanical properties of the MC composite hydrogel were controlled by varying its TA and Fe³⁺ contents. In particular, the hydrogel with a TA-Fe chelating complex showed an excellent photothermal effect, indicating its potential application in cosmetic beauty devices. It also exhibited UV-blocking, antioxidant, and antibacterial properties owing to the multifunctional TA. The facile processing of these MC/TA/Fe hydrogels provides new opportunities for biomedical applications and beauty devices employing NIR laser therapy.

An Overview of Cellulose Derivatives-Based Dressings for Wound-Healing Management

Presently, notwithstanding the progress regarding wound-healing management, the treatment of the majority of skin lesions still represents a serious challenge for biomedical and pharmaceutical industries. Thus, the attention of the researchers has turned to the development of novel materials based on cellulose derivatives. Cellulose derivatives are semi-synthetic biopolymers, which exhibit high solubility in water and represent an advantageous alternative to water-insoluble cellulose. These biopolymers possess excellent properties, such as biocompatibility, biodegradability, sustainability, non-toxicity, non-immunogenicity, thermo-gelling behavior, mechanical strength, abundance, low costs, antibacterial effect, and high hydrophilicity. They have an efficient ability to absorb and retain a large quantity of wound exudates in the interstitial sites of their networks and can maintain optimal local moisture. Cellulose derivatives also represent a proper scaffold to incorporate various bioactive agents with beneficial therapeutic effects on skin tissue restoration. Due to these suitable and versatile characteristics, cellulose derivatives are attractive and captivating materials for wound-healing applications. This review presents an extensive overview of recent research regarding promising cellulose derivatives-based materials for the development of multiple biomedical and pharmaceutical applications, such as wound dressings, drug delivery devices, and tissue engineering.

Self-crosslinkable hyaluronate-based hydrogels as a soft tissue filler

With increasing interest in aging and skin care, the use of fillers to increase the volume of soft tissue volume is increasing globally. However, the side effects caused by the residual chemical crosslinking agents present in these fillers limit the effective application of commercialized filler products. Therefore, the development of a novel crosslinking system with a non-toxic chemical crosslinking agent is required to overcome the limitations of commercial hyaluronate (HA)-based fillers. In this paper, a new injectable hydrogel with enhanced mechanical properties, tissue adhesion, injectability, and biocompatibility is reported. The HA derivatives modified with catechol groups (HA-DA) were crosslinked by self-oxidation under in vivo physiological conditions (pH 7.4) without chemical crosslinkers to form hydrogels, which can be further accelerated by the dissolved oxygen in the body. The fabricated HA-DA filler showed excellent mechanical properties and could be easily injected with a low injection force. Further, the HA-DA filler stably attached to the injection site due to the tissue adhesion properties of the catechol groups, thus leading to an improved displacement stability. In addition, the HA-DA filler showed excellent cell viability, cell proliferation, and biocompatibility. Therefore, the HA-DA hydrogel is a novel soft tissue filler with great potential to overcome the limitations of commercial soft tissue fillers.

Mussel-inspired poly(γ-gl utamic acid)/nanosilicate composite hydrogels with enhanced mechanical properties, tissue adhesive properties, and skin tissue regeneration

It was demonstrated herein that the adhesive property of catechol-functionalized nanocomposite hydrogel can be enhanced by tuning the cohesive strength due to the secondary crosslinking between catechol and synthetic bioactive nanosilicate, viz. Laponite (LP). The nanocomposite hydrogel consists of the natural anionic poly(γ-glutamic acid) (γ-PGA), which was functionalized with catechol moiety, and incorporated with disk-structured LP. The dual-crosslinked hydrogel was fabricated by enzymatic chemical crosslinking of catechol in the presence of horseradish peroxidase (HRP) and H₂O₂, and physical crosslinking between γ-PGA-catechol conjugate and LP. The PGADA/LP nanocomposite hydrogels with catechol moieties showed strong adhesiveness to various tissue layers and demonstrated an excellent hemostatic properties. These PGADA/LP nanocomposite hydrogels are potentially applied for injectable tissue engineering hydrogels, tissue adhesives, and hemostatic materials. STATEMENT OF SIGNIFICANCE: Recently, many attempts have been performed to manufacture high-performance tissue adhesives using synthetic and natural polymer-based materials. In order to apply in various biological substrates, commercially available tissue adhesives should have an improved adhesive property in wet conditions. Here, we designed a mussel-inspired dual crosslinked tissue adhesive that meets most of conditions as an ideal tissue adhesive. The designed tissue adhesive is composed of poly(γ-glutamic acid)-dopamine conjugate (PGADA)-gluing macromer, horseradish peroxidase (HRP)/hydrogen peroxide (H₂O₂)-enzymatic crosslinker, and Laponite (LP)-additional physical crosslinking nanomaterial. The PGADA hydrogel has tunable physicochemical properties by controlling the LP concentration. Furthermore, this dual crosslinked hydrogel shows strong tissue adhesive property, regardless of the tissue types. Specially the PGADA hydrogel has tissue adhesive strength four times higher than commercial bioadhesive. This dual crosslinked PGADA hydrogel with improved tissue adhesion property is a promising biological tissue adhesive for various tissue type in surgical operation.

Experimental Study on Thermosensitive Hydrogel Used to Extinguish Class A Fire

Hydrogels are crosslinked polymers that become fully swollen when placed in aqueous environments. They are widely used in the field of firefighting because they can remarkably increase the viscosity and wettability of water. In this study, a thermosensitive hydrogel used to effectively suppress class A fire was synthesized by using methylcellulose, sodium polyacrylate, and magnesium chloride. The structure, surface activity and viscosity of the hydrogel were characterized. Fire extinguishing performance was evaluated based on small-scale and large-scale experiments. The results showed that a phase transition of the hydrogel occurred when the temperature rose from 50 °C to 80 °C. After the phase transition, the hydrogel showed a higher viscosity and lower surface tension, which was conducive to attach to the surface of the burning material and acting as an effective barrier to isolate oxygen. The small-scale fire extinguishing tests indicated that the concentration of the hydrogel solution has an eminent influence on fire extinguishing performance. The optimum concentration for extinguishing performance was around 6 wt%. The large-scale experiments demonstrated that the fire-extinguishing performance of this thermosensitive hydrogel was superior to the two other commercial water-based fire extinguishing agents, as it prevented re-ignition highly efficiently.

Dual-crosslinked methylcellulose hydrogels for 3D bioprinting applications

Thermo-sensitive methylcellulose (MC) hydrogel has been widely used as a scaffold material for biomedical applications. However, due to its poor mechanical properties, the MC-based hydrogel has rarely been employed in 3D bioprinting for tissue engineering scaffolds. In this study, the dual crosslinkable tyramine-modified MC (MC-Tyr) conjugate was prepared via a two-step synthesis, and its hydrogel showed excellent mechanical properties and printability for 3D bioprinting applications. The MC-Tyr conjugate formed a dual-crosslinked hydrogel by modulating the temperature and/or visible light. A combination of reversible physical crosslinking (thermal crosslinking) and irreversible chemical crosslinking (photocrosslinking) was used in this dual crosslinked hydrogel. Also, the photocrosslinking of MC-Tyr solution was facilitated by visible light exposure in the presence of biocompatible photoinitiators (riboflavin, RF and riboflavin 5'-monophophate, RFp). The RF and RFp were used to compare the cytotoxicity and salting-out effect of MC-Tyr hydrogel, as well as the initiation ability, based on the difference in chemical structure. Also, the influence of the printing parameters on the printed MC hydrogel was investigated. Finally, the cell-laden MC-Tyr bioink was successfully extruded into stable 3D hydrogel constructs with high resolution via a dual crosslinking strategy. Furthermore, the MC-Tyr scaffolds showed excellent cell viability and proliferation.