The impact of wheat (Triticum aestivum L.) bran on wheat starch gelatinization: A differential scanning calorimetry study

Improved properties of dough fermented with rice wine prepared by mixed Saccharomycopsis fibuligera SF7 and Saccharomyces cerevisiae SC1

In view of the special aptitudes of the yeast population in both rice wine production and dough fermentation, in this study, the characteristics of dough fermented with rice wine prepared from mixed Saccharomycopsis fibuligera SF7 and Saccharomyces cerevisiae SC1 (JFC) were evaluated and compared with those of dough fermented directly with the two yeast co-cultures (FC). Dough inoculated with JFC showed higher acidity, reducing sugar content and leavening activity than dough fermented with FC. The water distribution pattern and pasting properties of the JFC-fermented dough changed dramatically after fermentation, and the dough microstructure and extensibility were improved. The steamed bread made with JFC-fermented dough had improved specific volume and showed similar volatile compound profiles to that made with commercial Jiuqu. These results indicated that mixed S. fibuligera SF7 and S. cerevisiae SC1 could be used as defined starter cultures in rice wine preparation for steamed bread production.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-024-01598-w.

Citrus peel powder alters the rheological properties and 3D printing performance of potato starch gel

Owing to the growing interest in sustainable resource utilization, the current study explores the potential replacement of pectin with citrus peel powder (CP) in starch-based 3D food printing ink formulations. The effect of different concentrations of pectin (1 %, 2 %, 3 %) and CP (1 %, 2 %, 3 %) on the printing fidelity, microstructure, rheological and textural properties of potato starch gel were investigated. The results showed that the 3D printing performance of CP-added inks was higher than that of pectin-added inks at all tested concentrations. The storage modulus of CP-added ink was higher than that of pectin-added ink proving higher printing fidelity of CP-added inks. Additionally, hardness, gumminess, springiness and chewiness of food ink increased with an increase in the concentration of CP while decreased with an increase in concentration of pectin. Interestingly, pectin and CP-added inks displayed similar in vitro digestibility, suggesting an insignificant effect of replacing pectin with CP on in vitro glucose release. Moreover, the antioxidant activity of CP-added ink was higher than pectin-added ink demonstrating the potential applications of CP-added ink in functional ink development. Therefore, this study claims for effective replacement of pectin with CP in starch-based 3D food printing ink formulations as a promising sustainable additive.

Effects of acidification by traditional Jiaozi starter and neutralization with alkali (Na2CO3) on whole wheat dough properties

BACKGROUND

Whole wheat steamed bread has been recommended for its potential nutritional benefits to human health. Given the positive role of both organic acid and alkali in improving dough development and product quality, the present study investigated the effects of neutralization by addition of alkali (Na2CO3) after dough acidification with traditional Jiaozi starter on the properties of whole wheat dough.

RESULTS

The population of yeast and lactic acid bacteria and the acidification level of the dough increased significantly after fermentation with Jiaozi. Incorporation of alkali greatly improved the leavening capacity of the remixed dough and the quality of steamed bread. Jiaozi fermentation and alkali addition changed the water distribution patterns (T2) and affected the secondary structures of gluten protein, starch crystallinity and pasting properties. The storage modulus (G') of the dough increased significantly with the alkali addition, which could be attributed to the promoted cross-linking of the gluten structure and the altered hydration state of the macromolecules.

CONCLUSION

The results of the present study indicate that a combination of Jiaozi fermentation and alkali addition could improve the technological properties of whole wheat dough and the quality of steamed bread. The results will help us to further explore the potential application of moderate acidification and alkali addition in the production of leavened whole wheat products. © 2024 Society of Chemical Industry.

Cereal flours with Bacillus coagulans and beta-glucan: Technological properties and sensory acceptability

This study aimed to develop three formulations of cereal flours: control cereal flour (CCF), probiotic cereal flour (PCF), and symbiotic cereal flour (SCF), and porridges from the flours were manufactured as a functional food. No significant differences were observed in the microbiological quality and the color of the flours for 150 days. The technological and functional potential of the flours were variously improved with the addition of Bacillus coagulans as a probiotic and beta-glucan as a prebiotic. The addition of beta-glucan fiber did not change the viability of the probiotic, which was higher than 7.45 log CFU/g for SCF and 7.13 log CFU/g for PCF until the end of the storage period. All porridge samples showed non-Newtonian fluid behavior with pseudoplastic characteristics; and the PCF and SCF porridges differed regarding the parameters of hardness (1.10 to 1.38 N), adhesiveness (5.88 to 8.86 mJ), cohesiveness (0.78 to 0.95) and gumminess (0.93 to 1.52 N) over time. The addition of the beta-glucan prebiotic interfered with these attributes due to its gelling capacity in the presence of water. The PCF obtained the best sensory acceptance scores when compared to the other formulations. The addition of Bacillus coagulans and beta-glucan did not interfere with thermographic behavior. The SCF differed in the observed crystallinity parameters from CCF and PCF, with the presence of larger solids and agglomerates.

A global set of barley varieties shows a high diversity in starch structural properties and related gelatinisation characteristics

The gelatinisation temperature and bimodal granule size distribution of barley starch are important characteristics regarding resource efficiency and product quality in the brewing industry. In this work, the diversity in starch amylose content and granule proportions in a set of modern barley varieties (N = 23) was investigated and correlated with their starch gelatinisation behaviour. Milled barley samples had peak starch gelatinisation temperatures ranging from 60.1 to 66.5 °C. Upon separating the barley starch from the non-starch compounds, sample-dependent decreases in starch gelatinisation temperatures were observed, indicating the importance of differences in barley composition. The peak gelatinisation temperatures of milled barley and isolated barley starches were strongly correlated (r = 0.96), indicating that the behaviour of the starch population is strongly reflected in the measurements performed on milled barley. Therefore, we investigated whether amylose content or starch granule size distribution could predict the gelatinisation behaviour of the starches. Broad ranges in the small starch granule volumes (13.9-32.0 v/v%) and amylose contents (18.2-30.7 w/w%) of the barley starches were observed. For the barley samples collected in the north of the USA (N = 8), the small starch granule volumes correlated positively with the peak gelatinisation temperatures of barley starches (r = 0.90, p < 0.01). The considerable variation in starch properties described in this work highlights that, besides starch content, starch gelatinisation temperature or granule size distribution might provide brewers with useful information to optimise resource efficiency.

Wheat milling across history altered sugar bioaccessibility assessed using TIM-1 in vitro digestion model

The differences in wheat flour characteristics caused by ancient (pestle and mortar), old (stone hand mill), and modern (roller and cyclone) milling techniques and their effect on in vitro starch digestibility of wheat porridge using the simulated TIM Gastrointestinal Model (TIM-1) were investigated. Ancient flour (AF) was the coarsest flour (∼70 % is >1000 µm), followed by old wholemeal flour (OWF) and old refined flour (ORF) with similar particle size distribution showing one prominent peak (at ∼1000 µm for OWF and ∼800 µm for ORF). Modern refined flour (MRF) had a monomodal distribution centered at a particle size of ∼100 μm, while modern wholemeal flour (MWF) particle size was distributed between 40 and 600 μm. MRF and MWF porridges had higher cumulative sugar bioaccessibility than OWF and AF porridges, with ORF porridge having an intermediate cumulative sugar bioaccessibility. Characterizing the cumulative sugar bioaccessibility profile with a shifted logistic model allows identifying that the maximum sugar bioaccessibility and rate of sugar release were significantly higher (p < 0.05) for MRF and MWF compared to OWF and AF porridges, while the induction times were shorter, demonstrating the importance of processing on modulating starch digestibility.

A Rapid and Quantitative Method for Determining Seed Viability Using 2,3,5-Triphenyl Tetrazolium Chloride (TTC): With the Example of Wheat Seed

Current colorimetric methods for quantitative determination of seed viability (SV) with 2,3,5-triphenyl tetrazolium chloride (TTC) have been plagued by issues of being cumbersome and time-consuming during the experimental process, slow in extraction and staining, and exhibiting inconsistent results. In this work, we introduced a new approach that combines TTC-staining with high-temperature extraction using dimethyl sulfoxide (DMSO). The optimization of the germination stage, TTC-staining method, and 1,3,5-triphenylformazan (TTF) extraction method were meticulously carried out as follows: When the majority of wheat seeds had grown the radicle, and the length of radicles was approximately equal to the seed length (24 h-germination), 2 g germinating seeds were placed into a beaker (20 mL) containing 5 mL 10 g·L-1 TTC solution. The seeds were stained with TTC in the dark at 25 °C for 1 h. Following the staining, 1 mL 1 mol·L-1 H2SO4 was added to stop the reaction for 5 min. The H2SO4 solution was then removed, and the seeds were gently rinsed with deionized water. Subsequently, the TTF produced in the seeds was extracted directly with 5 mL DMSO solution at 55 °C for 1 h. The absorbance of the extract was measured at 483 nm, and the index of SV was calculated according to a predetermined TTC calibration curve and expressed by mg TTC·g-1 (seed)·h-1. The new method has been demonstrated to be rapid, stable, and highly sensitive, as evidenced by the accurate measurement of seed viability with different aging degrees.

Physicochemical and functional properties of seed flours obtained from germinated and non-germinated Canavalia gladiata and Mucuna pruriens

C. gladiata and M. pruriens are underutilized legumes available in Sri Lanka. The physicochemical and functional properties of germinated and non-germinated flours from these two legumes were investigated. Protein contents of the flours of C. gladiata and M. pruriens increased by 17.04% and 14.69% respectively while fat and carbohydrate contents decreased due to germination. Higher Fe, Cu, Zn, Mn, and Se content was observed in both germinated flour types. Glutamic acid is the highest non-essential amino acid whereas leucine is the highest essential amino acid found in both flour types. The majority of amino acids in 100 g of seed flour of both legumes increased due to germination. Moreover, some of the functional properties of legume flours were changed such as swelling power, water and oil holding capacities because of the germination. In conclusion, the functional and nutritional properties of flour can be altered by the germination process making them ideal for utilization as ingredients for functional food formulations.

Effects of particle size on quality characteristics of stone-milled whole wheat flour

BACKGROUND

Whole wheat flour (WWF) prepared by the direct crushing method preserves all the components of the whole wheat grain. WWF with different particle sizes (180, 150, 125, 106, and 96 μm) was obtained by combining stone milling and particle size sieving technology. The effects of particle size on the proximate composition, farinograph, pasting, thermal, and functional properties, starch microstructure, and Fourier-transform infrared (FTIR) spectroscopy of stone-milled WWF were investigated.

RESULTS

The smaller the particle size of WWF, the higher the damaged starch content. The water absorption, degree of softening, pasting temperature, solubility, and syneresis of WWF increased steadily as the particle size decreased, whereas the peak viscosity, final viscosity, swelling power, water holding capacity, and enthalpy of gelatinization decreased. The scanning electron microscope micrographs revealed that the larger the particle size of WWF, the denser the distribution of starch granules. The β-sheet and β-turn contents of WWF with particle size 180 μm were the highest, reaching up to 33.85% and 39.79%, respectively.

CONCLUSION

The particle size exerted influence on the quality characteristics of stone-milled WWF, and the overall properties of WWF were better at medium particle size. © 2023 Society of Chemical Industry.

Biocomposites Based on Plasticized Wheat Flours: Effect of Bran Content on Thermomechanical Behavior

In the present work, the effect of different bran content on the overall thermomechanical behavior of plasticized wheat flours (thermoplastic wheat flour; TPWF) was investigated. Refined flour (F0) with negligible bran fiber content, F1 flour (whole grain flour, 20% wt. bran), F3 (50% wt. bran) and F2 (F1:F3, 50:50) film samples were realized by extrusion process. The effect of TPWF blending with two different biopolymers (polycaprolactone and poly butyrate adipate terephthalate), combined with the presence of citric acid as compatibilizer was also considered. Results from FESEM analysis and tensile characterization demonstrated that PCL was able to reach improved compatibility with the plasticized flour fraction at intermediate bran content (F2 based formulation) when 25% wt. of biopolymeric phase was added. Additionally, it was proved that improvements can be achieved in both thermal and mechanical performance when higher shear rate (120 rpm) and low temperature profiles (T_set2 = 130–135–140 °C) are selected. Disintegrability of the TPWF basic formulations in compositing conditions within 21 days was also confirmed; at the same time, an absence of any phytotoxic event of compost itself was registered. The obtained results confirmed the suitability of these materials, realized by adding different bran contents, to mechanically compete with bioplastics obtained by using purified starches.