Structure and physicochemical properties of amphiphilic agar modified with octenyl succinic anhydride

Preparation, properties and emulsifying capacity of octenyl succinic anhydride modified peach gum polysaccharide

In this study, octenyl succinic anhydride modified peach gum polysaccharide (OSPG) with different substitution rate (0.93 % to 2.02 %) were prepared and their properties were assessed. FTIR spectroscopy showed two new peaks for OSPG spectrum at 1726 cm-1 and 1569 cm-1, respectively. 1H NMR showed that OSPG showed many octenyl succinic anhydride (OSA) characteristic peaks in the range of 0.7-3.0 ppm and 5.3-5.5 ppm. FTIR and 1H NMR confirmed the success of grafting modification. The TG curves showed the thermal decomposition temperature of the OSPG was higher than peach gum polysaccharide (PGP) in the second stage. Compared with PGP, the particle size and the absolute value of the zeta potential of OSPG solutions also increased. The emulsifying activity of PGP increased from 30.67 % to 77 % after modification and the OSPG emulsion still showed good emulsifying stability after 3 months. The encapsulation efficiency of the curcumin emulsion was increasing from 69.49 % stabilized by of PGP to 80.99 % stabilized by OSPG. Overall, OSPGs with both hydrophilic and hydrophobic groups can serve as emulsifiers, exhibit excellent emulsion stability during prolonged storage periods, and can be utilized for encapsulating lipophilic bioactive substances.

Enhancing Viability of Lactobacillus rhamnosus GG and Total Polyphenol Content in Fermented Black Goji Berry Beverage Through Calcium-Alginate Encapsulation with Hydrocolloids

Encapsulation techniques play a crucial role in enhancing the stability and viability of probiotics in functional foods. This study investigates the efficacy of calcium-alginate encapsulation, combined with hydrocolloids such as carrageenan, agar, and gelatin, in improving the survival of Lactobacillus rhamnosus GG (LGG) and stabilizing the total phenolic content (TPC) in fermented black goji berry beverages. The results revealed that 1.5% alginate encapsulation, combined with 1% carrageenan, agar, or gelatin and 5% calcium, significantly enhanced the LGG viability and increased the TPC content in the fermented black goji berry beads when compared to calcium-alginate encapsulation alone. Fourier Transform Infrared Spectroscopy (FTIR) confirmed the successful incorporation and interaction of hydrocolloids within the encapsulation matrix. Among the formulations, calcium-alginate-gelatin beads exhibited the highest LGG survival rates after simulated gastric and intestinal digestion. Notably, calcium-alginate beads containing carrageenan preserved LGG viability during simulated gastric and intestinal conditions when co-digested with all tested milk types (high carbohydrate, high protein, and high fat). Co-ingestion with these milk types further improved TPC retention in all bead formulations, as the macronutrients in milk provided protective effects, stabilizing the encapsulated polyphenols and minimizing their degradation during simulated gastric and intestinal digestion. This study highlights the potential of calcium-alginate encapsulation, integrated with hydrocolloids such as carrageenan, agar, or gelatin, to improve probiotic viability and polyphenol stability, offering promising applications for enhancing the functional properties of non-dairy fermented beverages.

Structure and physicochemical properties of rice starch modified with dodecenyl succinic anhydride and its use for microencapsulating Pediococcus acidilactici probiotic

Polysaccharides are used as wall materials to extend the shelf life of lactic acid bacteria. Ice crystal formation during freezing leads to probiotic death. We prepared a series of dodecenyl succinic anhydride (DDSA)-modified rice starches with varying degrees of substitution and compared their functional properties. Fourier-transform infrared spectroscopy, X-ray diffraction analysis, and nuclear magnetic resonance results confirmed successful DDSA modification and the disruption of the long-range ordering of starch molecules. The structural changes modified the physicochemical properties of starch. For example, the apparent viscosity and viscoelastic characteristics of modified rice starch increased, and its freeze-thaw stability and emulsion capacity were remarkably improved after DDSA modification. Moreover, the modified starches exhibited promising performance for microencapsulating Pediococcus acidilactici. This study describes a rice starch derivative with excellent physicochemical properties that can be used to enhance the storage stability of bioactive probiotics.

Insight into esterified and granular esterified-pregelatinized starch formation during esterification modification: Key role of temperature

The formation conditions and functional property differences of esterified starch (ES) and granular esterified-pregelatinized starch (EPS) synchronously prepared by octenyl succinic anhydride (OSA) modification remain unclear. In this study, we explored the formation conditions and physicochemical properties of ES and EPS after OSA modification. The modification temperature controlled the formation amount and time for both starch types during OSA modification. Compared to ES, EPS exhibited a higher degree of substitution, cold-water swelling power, water-absorption capacity and apparent viscosity in cold water. The structural characterization confirmed the molecular weight and short/long-range molecular order of ES and EPS decreased. Moreover, scanning electron microscopy indicated EPS retained its granular morphology. The X-ray diffraction patterns confirmed the presence of more starch-lipid complexes formed in EPS than in ES. This study provides a novel method for preparing esterified and granularly esterified-pregelatinized starches that could be used as promising additives in low-energy formula foods.

Esterification of dextran by octenyl succinic anhydride (OSA): Physicochemical characterization and functional properties assessment

The chemical modification of biopolymers to enhance their functional properties in the food, cosmetic, and pharmaceutical industries is an area of particular interest today. In this study, different molecular weight dextrans were chemically modified for the first time with octenyl succinic anhydride (OSA). This reaction involves an esterification process wherein the hydroxy groups of dextran are partially substituted by a carbonaceous chain, imparting hydrophobic properties to dextran molecules and, consequently, an amphiphilic nature. To assess and quantify the incorporation of OSA into the dextran structure, reaction products were analysed using NMR and FTIR. Additionally, the thermal properties, the Z-potential and the foaming and emulsifying capacity of both native and modified dextrans were examined. The introduction of OSA groups to dextran molecules, with degrees of substitution between 0.028 and 0.058, increased the zeta potential and the thermal stability of the polymer. Furthermore, the chemical modification of dextran backbone with this radical conferred a hydrophobic nature to the biopolymer, which enhance its foaming and emulsifying capacity. Therefore, these results demonstrate that the incorporation of hydrophobic moieties into dextran polymers improves their functional properties and broadens their potential applications in the industry.

Agar-gelatin Maillard conjugates used for Pickering emulsion stabilization

A few protein- and polysaccharide-based particles have shown promising potential as stabilizers in multi-phase food systems. By incorporating polymer-based particles and modifying the wettability of colloidal systems, it is possible to create particle-stabilized emulsions with excellent stability. A Pickering emulsifier (AGMs) with better emulsifying properties was obtained by the Maillard reaction between acid-hydrolysed agar and gelatin. Laser confocal microscopy imaging revealed that AGMs particles can be used as solid emulsifiers to produce a typical O/W Pickering emulsion, with AGMs adsorbing onto the droplet surface to form a dense interfacial layer. Cryo-scanning electron microscopy analysis showed that AGMs self-assembled into a three-dimensional network structure, which prevented droplets aggregation through strong spatial site resistance, contributing to emulsion stabilization. These emulsions exhibited stability within a pH range of 1 to 11, NaCl concentrations not exceeding 300 mM, and at temperatures below 80 °C. The most stable emulsion oil-water ratio was 6:4 at a particle concentration of 0.75 % (w/v). AGMs-stabilized Pickering emulsion was utilized to create a semi-solid mayonnaise as a replacement for hydrogenated oil. Rheological analysis demonstrated that low-fat mayonnaise stabilized with AGMs exhibited similar rheological behavior to traditional mayonnaise, offering new avenues for the application of Pickering emulsions in the food industry.

Chemically modified seaweed polysaccharides: Improved functional and biological properties and prospective in food applications

Seaweed polysaccharides are natural biomacromolecules with unique physicochemical properties (e.g., good gelling, emulsifying, and film-forming properties) and diverse biological activities (e.g., anticoagulant, antioxidant, immunoregulatory, and antitumor effects). Furthermore, they are nontoxic, biocompatible and biodegradable, and abundant in resources. Therefore, they have been widely utilized in food, cosmetics, and pharmaceutical industries. However, their properties and bioactivities sometimes are not satisfactory for some purposes. Modification of polysaccharides can impart the amphiphilicity and new functions to the biopolymers and change the structure and conformation, thus effectively improving their functional properties and biological activities so as to meet the requirement for targeted applications. This review outlined the modification methods of representative red algae polysaccharides (carrageenan and agar), brown algae polysaccharides (fucoidan, alginate, and laminaran), and green algae polysaccharides (ulvan) that have potential food applications, including etherification, esterification, degradation, sulfation, phosphorylation, selenylation, and so on. The improved functional properties and bioactivities of the modified seaweed polysaccharides and their potential food applications are also summarized.

Fabrication, structure, characterization and emulsion application of citrate agar

In this study, citric acid successfully reacted with agar through the dry heat method, and citrate agar (CA) gel was used to stabilize O/W emulsions. The mechanisms of the CA structure and emulsion pH that affected emulsion stabilization were analyzed, and the application of CA gel emulsion (CAGE) was explored. Compared with native agar (NA), CA showed lower gel strength, higher transparency, and higher water contact angle. These changes indicate that a cross-linking reaction occurred, and it was demonstrated via FTIR and NMR. The emulsion properties were evaluated using particle size, ζ-potential, and the emulsification activity index. Results showed that CAGEs had a smaller particle size and lower ζ-potential than the native agar gel emulsion (NAGE). Meanwhile, confocal laser scanning microscopy confirmed that the CA gels stabilized the emulsions by forming a protective film around the oil droplets. Stability experiments revealed that CAGE (prepared with CA gel [DS = 0.145]) exhibited better stability than NAGE in the pH range of 3-11, and the rheological results further confirmed that the stability of the emulsions was influenced by the network structure and oil droplet interaction forces. Afterward, the application prospect of CAGE was evaluated by encapsulating vitamin D3 and curcumin.

Natural gums and their derivatives based hydrogels: in biomedical, environment, agriculture, and food industry

The hydrogels based on natural gums and chemically derivatized natural gums have great interest in pharmaceutical, food, cosmetics, and environmental remediation, due to their: economic viability, sustainability, nontoxicity, biodegradability, and biocompatibility. Since these natural gems are from plants, microorganisms, and seaweeds, they offer a great opportunity to chemically derivatize and modify into novel, innovative biomaterials as scaffolds for tissue engineering and drug delivery. Derivatization improves swelling properties, thereby developing interest in agriculture and separating technologies. This review highlights the work done over the past three and a half decades and the possibility of developing novel materials and technologies in a cost-effective and sustainable manner. This review has compiled various natural gums, their source, chemical composition, and chemically derivatized gums, various methods to synthesize hydrogel, and their applications in biomedical, food and agriculture, textile, cosmetics, water purification, remediation, and separation fields.

Preparation, characterization and in vitro digestion of octenyl succinic anhydride-modified porous starch with different degrees of substitution

Octenyl succinic anhydride modified porous starch (OSA-PS) with degrees of substitution (DS) from 0.0123 to 0.0427 were prepared by aqueous phase method. From SEM, PS had a porous structure which showed a rough and corrosive surface after esterification with OSA. FT-IR revealed the characteristic peaks of OSA-PS at 1725 cm-1 and 1570 cm-1. From 1H NMR spectra, OSA-PS displayed extra chemical signal peaks at 0.85 ppm, 1.25 ppm and 1.96 ppm. These results fully demonstrated that OSA groups were successfully grafted onto PS. Furthermore, as DS increased, the specific surface area (5.6464 m2/g), pore volume (0.9959 × 10-2 cm3/g) and methylene blue adsorption capacity (24.3962 mg/g) of OSA-PS reached the maximum, while its relative crystallinity (26.8112 %) and maximum thermal decomposition temperature (291.96 °C) were the minimum. In vitro digestion studies showed that with the increase of DS, OSA-PS' contents of rapidly digestible starch and slowly digestible starch decreased from 9.06 % to 6.27 % and 28.38 % to 14.61 %, respectively. In contrast, its resistant starch had an increase in content from 62.56 % to 79.12%. The results provided an effective method for obtaining a double-modified starch with high specific surface area and anti-digestibility, thus broadening the industrial application of starch.

Synthesis, physicochemical and emulsifying properties of OSA-modified tamarind seed polysaccharides with different degrees of substitution

Octenyl succinic anhydride modified tamarind seed polysaccharides (OTSPs) with various degrees of substitution were first synthesized and characterized in this work. The structural, solid-state, solution and emulsifying properties of the OTSPs and the effect of the degree of substitution (DS) were investigated. The structural characterization confirmed the successful grafting of the OSA moiety into TSP and the chain extension of the OTSPs. The hydrophobicity of the modified polysaccharide molecules increased, the absolute value of the zeta potential increased, and the thermal stability decreased, which were positively or negatively correlated with the changes in DS. In contrast, the hydrolysis of polysaccharides in alkaline aqueous solution led to a decrease in molar mass and the rigidity of the molecules, which were not significantly related to DS. Particle size analysis showed that OTSPs tended to aggregate into relatively small agglomerates, which was confirmed by the results of morphological analysis. Most importantly, the instability indices of emulsions stabilized by TSP, arabic gum and OSA-starch were 0.521, 0.715, and 0.804, respectively, while for OTSPs this parameter was between 0.04 and 0.19 under the same conditions, indicating better physical stability of the OTSP-stabilized emulsions, especially for OTSP-30. Overall, OTSP has great potential as an emulsifier for oil-in-water emulsions, especially for emulsification and stabilization in food processing.

Octenyl succinic anhydride-modified amyloid protein fibrils demonstrate enhanced ice recrystallization inhibition activity and dispersibility

Octenyl succinic anhydride (OSA) modification of amyloid proteins fibrils (APFs) was employed to improve dispersibility and ice recrystallization inhibition activity. OSA mainly reacted with the amino groups of APFs without significantly changing morphology. OSA-modified APFs (OAPFs) had lower pI, carried more negative charges, and were more hydrophobic. OSA-modification showed a pH-dependent effect on the dispersibility of fibrils. At pH 7.0, OSA-modification improved dispersibility and inhibited heat-induced gelation of fibrils at weakened electrostatic repulsion. OAPFs were more prone to aggregation with lower dispersity at acidic pH values and demonstrated stronger IRI activity than unmodified fibrils at pH 7.0. Our findings indicate OSA-modification favors the industrial application of APFs as an ice recrystallization inhibitor with enhanced dispersibility.

Biological Activities and Solubilization Methodologies of Naringin

Naringin (NG), a natural flavanone glycoside, possesses a multitude of pharmacological properties, encompassing anti-inflammatory, sedative, antioxidant, anticancer, anti-osteoporosis, and lipid-lowering functions, and serves as a facilitator for the absorption of other drugs. Despite these powerful qualities, NG's limited solubility and bioavailability primarily undermine its therapeutic potential. Consequently, innovative solubilization methodologies have received considerable attention, propelling a surge of scholarly investigation in this arena. Among the most promising solutions is the enhancement of NG's solubility and physiological activity without compromising its inherent active structure, therefore enabling the formulation of non-toxic and benign human body preparations. This article delivers a comprehensive overview of NG and its physiological activities, particularly emphasizing the impacts of structural modification, solid dispersions (SDs), inclusion compound, polymeric micelle, liposomes, and nanoparticles on NG solubilization. By synthesizing current research, this research elucidates the bioavailability of NG, broadens its clinical applicability, and paves the way for further exploration and expansion of its application spectrum.

Synthesis, characterization and potential applications for oxidized agarose

The knowledge of agarose (AG) oxidation using periodate as oxidizer has not been systematically explored. This paper synthesized oxidized agarose (OAG) using solid-sate and solution reaction methods; the reaction mechanism and the properties of OAG samples were systematically evaluated. Chemical structure analysis disclosed that the aldehyde group and carboxyl group contents in all OAG samples are extremely low. Meanwhile, crystallinity, dynamic viscosity and molecular weight of OAG samples is lower than that of the original AG. Reaction temperature, time and sodium periodate dosage are inversely proportional to the decline of the gelling temperature (Tg) and melting temperature (Tm); and the Tg and Tm for the OAG sample obtained are even 19 °C and 22 °C lower than that of the original AG. The as-synthesized OAG samples all possess excellent cytocompatibility and blood compatibility; and can promote the proliferation and migration of fibroblast cells. Last but not least, the gel strength, hardness, cohesiveness, springiness and chewiness of the OAG gel can be effectively regulated via oxidation reaction. In conclusions, both solid and solution oxidation can regulate the physical properties of OAG and enlarge its potential applications in wound dressing, tissue engineering and food areas.

Synthesis, characterization, antibacterial and emulsifying properties of agar benzoate

Agar benzoate (AB) with different degrees of substitution (DS) was synthesized by the esterification of agar and benzoic anhydride in aqueous solution. The DS could be regulated by adjusting composition ratio, pH, and temperature. Its chemical structure was determined by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (NMR). ¹³C NMR spectrum of the AB suggested the main substitution occurred at the C-6 in the d-galactopyranose. Cryo-scanning electron microscopy (Cryo-SEM) showed that the aperture of AB was larger than that of agar. The thermal performance of AB decreased slightly, but this did not affect its performance. AB showed the highest relative antibacterial activity against Escherichia coli, S. aureus and Alternaria alternata, reaching 100 % (AB 20 g/L), 100 % (AB 40 g/L) and 19.35 % (7 d incubation), respectively. Moreover, the obtained AB possessed good emulsion stability. These antibacterial AB have broad application prospects in the field of fruit and vegetable preservation.

Super absorbent glutaric anhydride-modified agar: Structure, properties, and application in biomaterial delivery

Agar was modified with glutaric anhydride (GA) in this study to expand its application in food and medicine. Glutaric anhydride-modified agar (GAR) can maintain high gel strength (1247.4 g/cm²) and improved transparency (82.7 %). The esterified agar formed by GA further formed a cross-linking molecule structure by increasing the reaction temperature. Notably, excellent freeze-thaw stability (24.1 %) and swelling property (3116.6 %) of GAR indicated that the carboxyl-terminal of modified agar improves its affinity with water. Therefore, satisfactory water permeability and expansive stone enable agar films to achieve high water absorption. Furthermore, GAR films exhibit a specific absorption capacity of tetracycline hydrochloride in weak acid solution, thereby suggesting its potential application as a sustainable drug delivery carrier. Finally, the structure of the modified agar was analyzed to explain the mechanism of binding water. Cryo-scanning electron microscopy (SEM) depicted the porous structure of the agar gel responsible for swelling, drug loading, and release. Low-field NMR results showed that GA improves agar gel's binding and free water content. According to our research results, these GAR hydrogel membranes with excellent properties have the potential to be used as effective drug delivery materials.

Pulsed electric field-assisted esterification improves the freeze-thaw stability of corn starch gel by changing its molecular structure

The influence of pulsed electric field (PEF) combined with octenyl succinic anhydride (OSA) on the freeze-thaw stability of corn starch gel was investigated. After five freeze-thaw cycles, the syneresis value of OSA starch treated with PEF-assisted esterification for 15 min was lower by 29.5 %, while that of OSA starch without PEF treatment was lower by 10.17 %, compared to that of native starch. Low-field nuclear magnetic resonance data showed that the introduction of OSA groups greatly increased the water-holding capacity of starch. Results from differential scanning calorimetry (DSC) and X-ray diffraction (XRD) showed that the PEF-assisted esterification markedly hindered the re-formation of the helical structure of starch during freeze-thaw cycles. Moreover, PEF-assisted esterification improved the viscoelastic properties of the starch gel. It is found that the freeze-thaw stability of the PEF-modified starch depends not only on the degree of substitution but also on the starch molecular fine structure. PEF-assisted OSA starch with a high degree of substitution, a low content of amylose, and a high content of short amylopectin chains were found to have high freeze-thaw stability. This study shows that PEF-assisted esterification is a promising technique that should be used for preserving the quality of frozen foods.

Production and Anti-Inflammatory Performance of PVA Hydrogels Loaded with Curcumin Encapsulated in Octenyl Succinic Anhydride Modified Schizophyllan as Wound Dressings

Amphiphilic polysaccharides can be used as wall materials and applied to encapsulate hydrophobic active chemicals; moreover, there is significant demand for novel medical high-molecular-weight materials with various functions. In order to prepare amphiphilic schizophyllan (SPG), octenyl succinic anhydride (OSA) was chosen to synthesize OSA-modified schizophyllan (OSSPG) using an esterified reaction. The modification of OSSPG was demonstrated through FT-IR and thermal analysis. Moreover, it was found that OSSPG has a better capacity for loading curcumin, and the loading amount was 20 μg/mg, which was 2.6 times higher than that of SPG. In addition, a hydrogel made up of PVA, borax, and C-OSSPG (OSSPG loaded with curcumin) was prepared by means of the one-pot method, based on the biological effects of curcumin and the immune-activating properties of SPG. The mechanical properties and biological activity of the hydrogel were investigated. The experimental results show that the dynamic cross-linking of PVA and borax provided the C-OSSPG/BP hydrogel dressing with exceptional self-healing properties, and it was discovered that the C-OSSPG content increased the hydrogel's swelling and moisturizing properties. In fibroblast cell tests, the cells treated with hydrogel had survival rates of 80% or above. Furthermore, a hydrogel containing C-OSSPG could effectively promote cell migration. Due to the excellent anti-inflammatory properties of curcumin, the hydrogel also significantly reduces the generation of inflammatory factors, such as TNF-α and IL-6, and thus has a potential application as a wound dressing medicinal material.

Chemical modifications in the structure of marine polysaccharide as serviceable food processing and preservation assistant: A review

Marine polysaccharides are a kind of natural polysaccharides which isolated and extracted from marine organisms. Now some marine polysaccharides, such as chitosan, sodium alginate and agar, have been proven to exhibit antibacterial, antioxidant functions and biocompatibility, which are often used to preserve food or improve the physicochemical properties of food. However, they still have the defects of unsatisfactory preservation effect and biological activity, which can be remedied by its modification. Chemical modification is the most effective of all modification methods. The advances in common chemical modification methods of chitosan, sodium alginate, agar and other marine polysaccharides and research progress of modified products in food processing and preservation were summarized, and the influence of additional reaction conditions on the existence of chemical modification sites of polysaccharides was discussed. The modification of functional groups in natural marine polysaccharides leads to the change of molecular structure, which can improve the physical, chemical and biological properties of marine polysaccharides. Chemically modified products have been used in various fields of food applications, such as food preservatives, food additives, food packaging, and food processing aids. In general, chemical modification has excellent potential for food processing and preservation, which can improve the function of marine polysaccharides.

Stable O/W emulsions and oleogels with amphiphilic konjac glucomannan network: preparation, characterization, and application

BACKGROUND

The stabilization of oil-in-water (O/W) emulsions has long been explored. Assembly of polymer networks is an effective method for stabilizing O/W emulsions. Konjac glucomannan (KGM) is a plant polysaccharide and the network of KGM gel is a good candidate for stabilizing O/W emulsions based on its high viscosity and thickening properties. However, natural KGM has strong hydrophilicity and is not able to offer interfacial activity. Octenyl succinic anhydride (OSA) is a hydrophobic molecule, which is widely used as thickener and stabilizer in food emulsions. In this work, the amphiphilic biopolymer (OSA-KGM) was fabricated by modifying the KGM with OSA. Furthermore, OSA-KGM biopolymer was used to prepare O/W emulsions, which were then freeze-dried and used to prepare oleogels as fat substitute for bakery products.

RESULTS

OSA-KGM had advanced hydrophobicity with water contact angle 81.13° and adsorption behavior at the oil-water interface, with interfacial tension decreasing from 18.52 to 13.57 mN m^-1 within 1 h. The emulsification of OSA-KGM remarkably improved the stability of emulsions without phase separation during storage for 31 days. Oleogels with OSA-KGM showed good thixotropic and structure recovery properties (approximately 100%) and low oil loss (from 69.5% to 50.4%). Cakes made from oleogels had a softer texture than cakes made from peanut oil and margarine.

CONCLUSION

Amphiphilic biopolymer OSA-KGM shows advanced interfacial activity and hydrophobicity. This paper provides an insight into preparing stable O/W emulsions with a new biopolymer and oleogels potentially applied as fat substitute in bakery products. © 2022 Society of Chemical Industry.

Recent advances of octenyl succinic anhydride modified polysaccharides as wall materials for nano-encapsulation of hydrophobic bioactive compounds

Polysaccharides can be esterified with octenyl succinic anhydride (OSA) to form derivatives with amphiphilic properties. The general preparation methods of OSA-polysaccharides are described, especially the aqueous method. The new hydrophobic groups introduced result in OSA-polysaccharides showing higher interfacial properties, better emulsifying stability, higher viscosity, and lower digestibility. There have been advances in the development of OSA-polysaccharides-based nano-encapsulation systems for hydrophobic bioactive compounds in recent years. Nano-encapsulation systems are formed through nanoemulsions, nanocapsules, nanoparticles, micelles, vesicles, molecular inclusion complexes, and so on. This review aims to describe the preparation methods, the structure characterizations, and the physicochemical properties of OSA-polysaccharides as encapsulating agents. In addition, the focus is on the different nano-encapsulation systems based on OSA-polysaccharides as wall materials. Future perspectives will concern OSA-polysaccharides-based nano-encapsulation systems with optimized functional properties for providing higher bioavailability and targeted delivery of various hydrophobic bioactive compounds. © 2022 Society of Chemical Industry.

Impact of weakly charged insoluble karaya gum on zein nanoparticle and mechanism for stabilizing Pickering emulsions

The effect of weakly charged insoluble karaya gum (KG) on zein colloidal nanoparticles (ZKGPs) for stabilizing Pickering emulsions was investigated. Due to weak surface charge, KG could cover the surface of zein particles by hydrogen bonds and weak electrostatic interactions. With the increase in coverage, the zeta potential of ZKGPs changed from positive to negative values close to zero and the average particle size tended to become larger. The closest neutral wettability (89.85°) was achieved when the zein/KG mass ratio was 1:1. The samples prepared with high oil volume fraction (φ = 0.5-0.75) and high particle concentration (1.0-1.3 %, w/v) formed emulsion gels easily and showed higher storage stability. CLSM images also confirmed that ZKGPs could be distributed in the continuous phase to enhance the emulsion network structure. Consequently, weakly charged ZKGPs reduced the emulsification energy barrier and increased the coverage and steric hindrance of particles at the oil/water interface. These findings provide new ideas for the development of stable Pickering emulsions for application in food textural modification as well as encapsulation and delivery of bioactive substances.

Effects of beeswax emulsified by octenyl succinate starch on the structure and physicochemical properties of acid-modified starchfilms

This work aimed to develop a novel strategy to modulate the distribution of beeswax in acid-modified starch films via tuning octenyl succinate starch (OSS) ratios and to elucidate their structure-property relationships. The apparent viscosity and storage modulus of the film-forming solution decreased with the increase of OSS ratio. Attenuated total reflectance-fourier transform infrared (ATR-FTIR) spectroscopy revealed that the hydrogen bond in the film-forming network was cleaved with the presence of OSS. Scanning electron microscope (SEM), atomic force microscope (AFM), and X-ray diffraction (XRD) demonstrated that OSS ratio had an obvious effect on the formation and distribution of beeswax crystal particles. Uniform distribution of beeswax effectively enhanced the hydrophobicity and water barrier properties of films and performed preferable elongation at break but at the expense of tensile strength and optical properties. The films with higher OSS ratio (>12 %) presented higher thermal stability. This study provides new information on the rational design of emulsified films to obtain desirable physicochemical properties by tuning the distribution of beeswax.

Synthesis of Gentamicin-Immobilized Agar with Improved Antibacterial Activity

To develop agar derivatives with good antibacterial activity and decreased gelling and melting temperatures, two agar–gentamycin conjugates with 9.20% and 12.68% gentamicin immobilized were fabricated by oxidation, Schiff base and reduction reaction, and characterized by a Fourier Transform Infrared Spectrometer, ¹H nuclear magnetic resonance and an elemental analyzer. It was found that the modifications changed the intermolecular interactions, leading to decreased gelling and melting temperatures for the oxidized agar and slightly increased gelling and melting temperatures for agar–gentamycin conjugates. Further studies of antimicrobial properties showed that the two agar–gentamycin conjugates possessed good antibacterial activity, which was positively correlated with the dosage and the immobilization rate of gentamicin. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of agar–gentamycin conjugates with higher immobilization rates of gentamicin against Escherichia coli were 39.1 μg/mL and 156.2 μg/mL, respectively, and the MICs and MBCs against Staphylococcus aureus were 19.5 μg/mL and 78.1 μg/mL, respectively. A biofilm test indicated that certain concentrations of agar–gentamycin conjugate could effectively inhibit the biofilm formation of Escherichia coli and Staphylococcus aureus. In summary, agar–gentamycin conjugates possess good antibacterial activities and may be applied as a new kind of antibacterial material.

Preparation and Characterization of κ-Carrageenan Modified with Maleic Anhydride and Its Application in Films

In this work, the physicochemical properties of maleic anhydride (MAH)-modified κ-carrageenan (κCar) (MC) were characterized and compared with those of native κ-carrageenan (NC). The Fourier transform infrared spectrum of MC exhibited that κCar was successfully modified. Thermogravimetric analysis indicated that the thermal stability of MC was decreased. When the degree of substitution was 0.032, MC exhibited a low gel strength (759 g/cm²), gelling temperature (33.3 °C), and dehydration rate (60.3%). Given the excellent film-forming ability of κCar, MC films were then prepared and were found to have better mechanical and barrier properties (UV and water) than NC films. With regard to optical properties, MC films could completely absorb UV light in the range of 200–236 nm. The water contact angle of MC films was higher than that of NC films. Moreover, the elongation at break increased from 26.9% to 163%. These physicochemical property changes imply that MC can be employed in polysaccharide-based films.