Toxic reactive oxygen species enhanced chemodynamic therapy by copper metal-nanocellulose based nanocatalysts

Photo-triggered caffeic acid delivery via psyllium polysaccharide- gellan gum-based injectable bionanogel for epidermoid carcinoma treatment

Here, the simultaneous effect of chemo- and photothermal therapy against epidermoid carcinoma (EC) was investigated. A novel hydrogel, termed bionanogel (BNG), was designed using psyllium mucilage polysaccharide and bacterial gellan gum, incorporated with nanocomplex carrying caffeic acid (CA) and IR-820, and further characterized. The dual effect of BNG and 808 nm laser (BNG + L) on EC was investigated. Staining and scratch assays were performed to analyze their therapeutic effect on EC. In vivo evaluations of BNG + L in xenograft models were performed. Rapid transition, limited swelling, degradability and high tensile strength indicated BNG stability and sustained drug release. Irradiation with 808 nm laser light at 1.25 W /cm2 for 4 min resulted in a temperature increase of 53 °C and facilitated cell ablation. The in vitro studies showed that BNG + L suppressed cancer progression via a late apoptotic effect. The in vivo study showed that the slow release of CA from BNG + L significantly attenuated EC with low mitotic index and downregulation of proteins involved in cancer proliferation such as EGFR, AKT, PI3K, ERK, mTOR and HIF-1α. Thus, BNG could be a novel medium for targeted and controlled drug delivery for the treatment of epidermoid cancer when triggered by NIR light.

Nucleus-targeting DNase I self-assembly delivery system guided by pirarubicin for programmed multi-drugs release and combined anticancer therapy

The cell nucleus serves as the pivotal command center of living cells, and delivering therapeutic agents directly into the nucleus can result in highly efficient anti-tumor eradication of cancer cells. However, nucleus-targeting drug delivery is very difficult due to the presence of numerous biological barriers. Here, three antitumor drugs (DNase I, ICG: indocyanine green, and THP: pirarubicin) were sequentially triggered protein self-assembly to produce a nucleus-targeting and programmed responsive multi-drugs delivery system (DIT). DIT consisted of uniform spherical particles with a size of 282 ± 7.7 nm. The acidic microenvironment of tumors and near-infrared light could successively trigger DIT for the programmed release of three drugs, enabling targeted delivery to the tumor. THP served as a nucleus-guiding molecule and a chemotherapy drug. Through THP-guided DIT, DNase I was successfully delivered to the nucleus of tumor cells and killed them by degrading their DNA. Tumor acidic microenvironment had the ability to induce DIT, leading to the aggregation of sufficient ICG in the tumor tissues. This provided an opportunity for the photothermal therapy of ICG. Hence, three drugs were cleverly combined using a simple method to achieve multi-drugs targeted delivery and highly effective combined anticancer therapy.

Nanoparticles loaded withβ-Lapachone and Fe3+exhibit enhanced chemodynamic therapy by producing H2O2through cascaded amplification

The rapid, irreversible change of active Fe2+to inactive Fe3+after the Fenton reaction occurring reduces the chemodynamic therapeutic (CDT) effect. Therefore, manipulation of the tumor microenvironment to provide sufficient hydrogen peroxide (H2O2) while maintaining metal ion catalyst activity is critical for effective CDT. Here,β-Lapachone (LPC) was loaded by mesoporous silica nanoparticles (MSNs) and coated with polydopamine (PDA) to further chelate Fe3+and link aptamer AS1411, and a pH-controlled released, chemotherapy-photothermal therapy (PTT)-enhanced CDT-small molecule therapy combination drug delivery system with passive and active tumor targeting was engineered (designated asβ-LPC@MSN@PDA/Fe3+-AS1411, LMPFA). The results showed that LFMPA nanoparticles massively accumulated in tumor tissues to achieve tumor targeting through AS1411 mediating and enhanced permeability and retention (EPR) effect. Subsequently, PDA released Fe3+and LPC through acid response to exhibited CDT and chemotherapeutic therapy. Meanwhile, the photothermal effect of PDA promoted the release of LPC from the pores of MSN. LPC exerted chemotherapy effect and cyclically producing of H2O2by the catalysis of NQO1, which enhanced the CDT activated by Fe3+. In addition, while serving as a targeted ligand, AS1411 could also exhibit a small molecule therapeutic effect by binding to nucleoli of tumor cells. This unique nano delivery system achieved the combination of chemotherapy, PTT, enhanced CDT and small molecule therapy, and fought against malignant tumors synergistically through multi-target and multi-dimension.

High deposition and precise stimulus-response release performance of lignin-coated dendritic mesoporous organosilica nanoparticles for efficient pesticide utilization

The inefficient and improper use of conventional pesticides has prompted the development of targeted and cost-effective pesticide delivery systems, which aim to optimize the efficient utilization of pesticides while minimizing environmental pollution in surrounding areas. In this paper, a dual-stimuli-responsive pesticide slow-release nanopesticide system (NES@DMONs@LGN) was designed in this study, utilizing mesoporous silica (DMONs) as a nanocarrier and lignin (LGN) as a capping agent to encapsulate the pesticide molecules within DMONs. This system enables intelligent release of pesticide molecules while preventing environmental pollution caused by leakage. Additionally, NES@DMONs@LGN exhibit excellent specific loading efficiency. The abundant hydrophilic functional groups in the lignin layer on the surface of NES@DMONs@LGN can establish hydrogen bonds with advanced fatty acids and fatty alcohols present in the waxy epidermis of plants, thereby significantly enhancing carrier wettability and adhesion. Typically, phytophagous lepidopteran pests have an alkaline midgut and possess lignin-degrading enzymes. The NES@DMONs@LGN developed in this study are capable of rapid release under high temperature and alkaline conditions. Therefore, the precise release of pesticide molecules in the target pests can be achieved, thus increasing the actual utilization rate of pesticides. The experimental results demonstrated that NES@DMONs@LGN effectively prevented photodegradation of the active ingredient after 48 h of UV irradiation, resulting in a 3.7-fold improvement in photostability and providing robust UV protection. By encapsulating pesticide molecules with nanocarriers, the release of pesticides in non-targeted environments can be prevented, thereby significantly reducing toxicity to zebrafish. Thus, this study provides a promising solution for sustainable greening of agriculture.

Metal nanoparticles and carbohydrate polymers team up to improve biomedical outcomes

The convergence of carbohydrate polymers and metal nanoparticles (MNPs) holds great promise for biomedical applications. Researchers aim to exploit the capability of carbohydrate matrices to modulate the physicochemical properties of MNPs, promote their therapeutic efficiency, improve targeted drug delivery, and enhance their biocompatibility. Therefore, understanding various attributes of both carbohydrates and MNPs is the key to harnessing them for biomedical applications. The many distinct types of carbohydrate-MNP systems confer unique capabilities for drug delivery, wound healing, tissue engineering, cancer treatment, and even food packaging. Here, we introduce distinct physicochemical/biological properties of carbohydrates and MNPs, and discuss their potentials and shortcomings (alone and in combination) for biomedical applications. We then offer an overview on carbohydrate-MNP systems and how they can be utilized to improve biomedical outcomes. Last but not least, future perspectives toward the application of such systems are highlighted.

Nanorod/nanodisk-integrated liquid crystalline systems for starvation, chemodynamic, and photothermal therapy of cancer

Indocyanine green (ICG), glucose oxidase (GOx), and copper(II) sulfate (Cu)-installed hybrid gel based on organic nanorod (cellulose nanocrystal [CNC]) and inorganic nanodisk (Laponite [LAP]) was developed to perform a combination of starvation therapy (ST), chemodynamic therapy (CDT), and photothermal therapy (PTT) for localized cancers. A hybrid CNC/LAP network with a nematic phase was designed to enable instant gelation, controlled viscoelasticity, syringe injectability, and longer in vivo retention. Moreover, ICG was introduced into the CNC/LAP gel system to induce hyperthermia of tumor tissue, amplifying the CDT effect; GOx was used for glucose deprivation (related to the Warburg effect); and Cu was introduced for hydroxyl radical generation (based on Fenton-like chemistry) and cellular glutathione (GSH) degradation in cancer cells. The ICG/GOx/Cu-installed CNC/LAP gel in combination with near-infrared (NIR) laser realized improved antiproliferation, cellular reactive oxygen species (ROS) generation, cellular GSH degradation, and apoptosis induction in colorectal cancer (CT-26) cells. In addition, local injection of the CNC/ICG/GOx/Cu/LAP gel into the implanted CT-26 tumor while irradiating it with NIR laser provided strong tumor growth suppression effects. In conclusion, the designed hybrid nanorod/nanodisk gel network can be efficiently applied to the local PTT/ST/CDT of cancer cells.

Nanocellulose-based drug carriers: Functional design, controllable synthesis, and therapeutic applications

With rising living standards and environmental awareness, materials-oriented chemical engineering has increasingly transitioned from traditional rough models to more resource-saving and eco-friendly models, providing an avenue for bio-based materials in the drug carrier field. Because of its excellent physical and chemical properties, including high specific surface area, abundant accessible hydroxyl groups, biocompatibility, and degradability, nanocellulose (NC) is an emerging bio-based material that has been widely exploited as biomedical materials. The modification techniques of NC, as well as advancements in the design and applications of drug carriers, were primarily discussed in this study. First, the NC modification methods are described; second, the applications of NC and its derivatives as drug carriers are summarized, focusing on NC-based carrier models, types of loaded therapeutic agents, and controlled release stimulators; and finally, the current challenges of NC in the drug carrier field and the directions of future research are also discussed.

Nickel oxide nanoparticles synthesis using plant extract and evaluation of their antibacterial effects on Streptococcus mutans

Dental decay is known in the world as the most common human infectious disease. Ascending process of dental caries index in the world shows the failure of oral disease prevention. Streptococcus mutans bacteria cause acid damage and tooth decay by producing acid over time. Nanomaterials with suitable functionality, high permeability, extremely large surface area, significant reactivity, unique mechanical features, and non-bacterial resistance can be considered as promising agents for antimicrobial and antiviral applications. In this study, nickel oxide (NiO) nanoparticles with size range from 2 to 16 nm containing Stevia natural sweetener were eco-friendly synthesized via a simple method. Additionally, their various concentrations were evaluated on S. mutans bacteria by applying the broth dilution method. The results demonstrated that these spherical NiO nanoparticles had efficient bacteriostatic activity on this gram-positive coccus.