Porous and conductive cellulose nanofiber/carbon nanotube foam as a humidity sensor with high sensitivity

Surface charge manipulation for improved humidity sensing of TEMPO-oxidized cellulose nanofibrils

Cellulose-based humidity sensors have attracted great research interest due to their hydrophilicity, biodegradability, and low cost. However, they still suffer from relatively low humidity sensitivity. Due to the presence of negatively charged carboxylate groups, 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibril (CNF) exhibits enhanced hydrophilicity and ion conductivity, which is considered a promising candidate for humidity sensing. In this work, we developed a facile strategy to improve the humidity sensitivity of CNF films by regulating their surface charge density. With the increase in surface charge density, both water uptake and charge carrier densities of the CNF films can be improved, enabling a humidity sensitivity of up to 44.5 % (%RH)-1, higher than that of most polymer-based humidity sensors reported in the literature. Meanwhile, the sensor also showed good linearity (R2 = 0.998) over the 15-75 % RH at 1 kHz. With these features, the CNF film was further demonstrated for applications in noncontact sensing, such as human respiration, moisture on fingertips, and water leakage, indicating the great potential of CNF film in humidity monitoring.

Hybrid Water-Harvesting Channels Delivering Wide-Range and Supersensitive Passive Fluorescence Humidity Sensors

The development of optical humidity detection has been of considerable interest in highly integrated wearable electronics and packaged equipment. However, improving their capacities for color recognition at ultralow humidity and response-recovery rate remains a significant challenge. Herein, we propose a type of hybrid water-harvesting channel to construct brand-new passive fluorescence humidity sensors (PFHSs). Specifically, the hybrid water-harvesting channels involve porous metal-organic frameworks and a hydrophilic poly(acrylic acid) network that can capture water vapors from the ambient environment even at ultralow humidity, into which polar-responsive aggregation-induced emission molecules are doped to impart humidity-sensitive luminescence colors. As a result, the PFHSs exhibit clearly defined fluorescence signals within 0-98% RH coupling with desirable performances such as a fast response rate, precise quantitative feedback, and durable reversibility. Given the flexible processability of this system, we further upgrade the porous structure via electrostatic spinning to furnish a kind of Nano-PFHSs, demonstrating an impressive response time (<100 ms). Finally, we validate the promising applications of these sensors in electronic humidity monitoring and successfully fabricate a portable and rapid humidity indicator card.

New Carbon Materials for Multifunctional Soft Electronics

Soft electronics are garnering significant attention due to their wide-ranging applications in artificial skin, health monitoring, human-machine interaction, artificial intelligence, and the Internet of Things. Various soft physical sensors such as mechanical sensors, temperature sensors, and humidity sensors are the fundamental building blocks for soft electronics. While the fast growth and widespread utilization of electronic devices have elevated life quality, the consequential electromagnetic interference (EMI) and radiation pose potential threats to device precision and human health. Another substantial concern pertains to overheating issues that occur during prolonged operation. Therefore, the design of multifunctional soft electronics exhibiting excellent capabilities in sensing, EMI shielding, and thermal management is of paramount importance. Because of the prominent advantages in chemical stability, electrical and thermal conductivity, and easy functionalization, new carbon materials including carbon nanotubes, graphene and its derivatives, graphdiyne, and sustainable natural-biomass-derived carbon are particularly promising candidates for multifunctional soft electronics. This review summarizes the latest advancements in multifunctional soft electronics based on new carbon materials across a range of performance aspects, mainly focusing on the structure or composite design, and fabrication method on the physical signals monitoring, EMI shielding, and thermal management. Furthermore, the device integration strategies and corresponding intriguing applications are highlighted. Finally, this review presents prospects aimed at overcoming current barriers and advancing the development of state-of-the-art multifunctional soft electronics.

Recent progress and applications of cellulose and its derivatives-based humidity sensors: A review

Cellulose and its derivatives, which are low-cost, degradable, reproducible and highly hydrophilic, can serve as both substrate and humidity sensitive materials, making them more and more popular as ideal biomimetic materials for humidity sensors. Benefiting from these characteristics, cellulose-based humidity sensors cannot only exhibit high sensitivity, excellent mechanical performance, wide humidity response range, etc., but also can be applied to fields such as human health, medical care and agricultural product safety monitoring. Herein, cellulose-based humidity sensors are first classified according to the different conductive active materials, such as carbon nanotubes, graphene, electrolytes, metal compounds, and polymer materials, based on which the latest research progress is introduced, and the roles of different types of conductive materials in cellulose-based humidity sensors are analyzed and summarized. Besides, the similarities and differences in their working mechanisms are expounded. Finally, the application scenarios of cellulose-based humidity sensors in human movement respiration and skin surface humidity monitoring are discussed, which can make readers quickly familiarize the current preparation method, working mechanism and subsequent development trend of cellulose-based humidity sensors more effectively.

Facile Preparation of Carbon Nanotubes/Cellulose Nanofibrils/Manganese Dioxide Nanowires Electrode for Improved Solid-Sate Supercapacitor Performances

Wearable energy storage devices require high mechanical stability and high-capacitance flexible electrodes. In this study, we design a flexible supercapacitor electrode consisting of 1-dimensional carbon nanotubes (CNT), cellulose nanofibrils (CNF), and manganese dioxide nanowires (MnO2 NWs). The flexible and conductive CNT/CNF-MnO2 NWs suspension was first prepared via ultrasonic dispersion approach, followed by vacuum filtration and hot press to form the composite paper electrode. The morphological studies show entanglement between CNT and CNF, which supports the mechanical properties of the composite. The CNT/CNF-MnO2 NWs electrode exhibits lower resistance when subjected to various bending angles (-120-+120°) compared to the CNT/CNF electrode. In addition, the solid-state supercapacitor also shows a high energy density of 38 μWh cm-2 and capacitance retention of 83.2% after 5000 cycles.

Miniaturized Flexible Non-Contact Interface Based on Heat Shrinkage Technology

High-performance miniaturized flexible sensors are becoming increasingly important in wearable electronics. However, miniaturization of devices often requires high-precision manufacturing processes and equipment, which limits the commercialization of flexible sensors. Therefore, revolutionary technologies for manufacturing miniaturized flexible sensors are highly desired. In this work, a new method for manufacturing miniaturized flexible humidity sensor by utilizing heat shrinkage technology is presented. This method successfully achieves much smaller sensor and denser interdigital electrode. Utilizing this method, a miniaturized flexible humidity sensor and array are presented, fabricated by anchoring nano-Al2 O3 into carbon nano-tube as the humidity sensitive film. This heat shrinkage technology, forming wrinkle structure on the humidity sensitive film, endows the sensor with a high sensitivity over 200% (ΔR/R0 ) at humidity levels ranging from 0 to 90%RH and a fast recovery time (0.5 s). The sensor allows non-contact monitoring human respiration and alerting in case of an asthma attack and the sensor array can be adaptively attached to the wrist as a non-contact human-machine interface to control the mechanical hand or computer. This work provides a general and effective heat shrinkage technology for the development of smaller and more efficient flexible circuits and sensor devices.

Ultra-Sensitive and Fast Humidity Sensors Based on Direct Laser-Scribed Graphene Oxide/Carbon Nanotubes Composites

In this paper, the relative humidity sensor properties of graphene oxide (GO) and graphene oxide/multiwalled nanotubes (GO/MWNTs) composites have been investigated. Composite sensors were fabricated by direct laser scribing and characterized using UV-vis-NIR, Raman, Fourier transform infrared, and X-ray photoemission spectroscopies, electron scanning microscopy coupled with energy-dispersive X-ray analysis, and impedance spectroscopy (IS). These methods confirm the composite homogeneity and laser reduction of GO/MWNT with dominant GO characteristics, while ISresults analysis reveals the circuit model for rGO-GO-rGO structure and the effect of MWNT on the sensor properties. Although direct laser scribing of GO-based humidity sensor shows an outstanding response (|ΔZ|/|Z| up to 638,800%), a lack of stability and repeatability has been observed. GO/MWNT-based humidity sensors are more conductive than GO sensors and relatively less sensitive (|ΔZ|/|Z| = 163,000%). However, they are more stable in harsh humid conditions, repeatable, and reproducible even after several years of shelf-life. In addition, they have fast response/recovery times of 10.7 s and 9.3 s and an ultra-fast response time of 61 ms when abrupt humidification/dehumidification is applied by respiration. All carbon-based sensors' overall properties confirm the advantage of introducing the GO/MWNT hybrid and laser direct writing to produce stable structures and sensors.

Multifunctional bio-films based on silk nanofibres/peach gum polysaccharide for highly sensitive temperature, flame, and water detection

Given their environment friendliness, light weight, and availability, bio-films have attracted wide interest for various applications in sensor materials. However, obtaining sensors with good environmental stability, excellent flame retardancy, and high wet strength remains a challenge. Herein, we prepared sensitive water, temperature and flame-responsive multi-function bio-films (named as PSCG bio-films) by combining peach gum polysaccharide, silk nanofibres, citric acid, and graphene. The PSCG bio-films demonstrated good flexibility, rapid and consistent water absorption, and stable wet strength at different temperatures. The bio-films showed excellent water sensitivity and rapid fire responsiveness within a short time frame (2 s); moreover, the response and recovery times of the bio-films in the temperature range of 50-150 °C were 0.1 and 0.3 s, respectively. In addition, the bio-films can be applied to micro-sized fire early warning devices and personalized breath monitoring. Our work presents a facile and green approach (without toxic solvent) to fabricate multi-function sensors with applications in various industries.

A Biodegradable Bioactive Glass-Based Hydration Sensor for Biomedical Applications

Monitoring changes in edema-associated intracranial pressure that complicates trauma or surgery would lead to improved outcomes. Implantable pressure sensors have been explored, but these sensors require post-surgical removal, leading to the risk of injury to brain tissue. The use of biodegradable implantable sensors would help to eliminate this risk. Here, we demonstrate a bioactive glass (BaG)-based hydration sensor. Fluorine (CaF₂) containing BaG (BaG-F) was produced by adding 5, 10 or 20 wt.% of CaF₂ to a BaG matrix using a melting manufacturing technique. The structure, morphology and electrical properties of the resulting constructs were evaluated to understand the physical and electrical behaviors of this BaG-based sensor. Synthesis process for the production of the BaG-F-based sensor was validated by assessing the structural and electrical properties. The structure was observed to be amorphous and dense, the porosity decreased and grain size increased with increasing CaF₂ content in the BaG matrix. We demonstrated that this BaG-F chemical composition is highly sensitive to hydration, and that the electrical sensitivity (resistive-capacitive) is induced by hydration and reversed by dehydration. These properties make BaG-F suitable for use as a humidity sensor to monitor brain edema and, consequently, provide an alert for increased intracranial pressure.