1
|
Sodium alginate/carboxycellulose/polydopamine composite microspheres for rapid hemostasis of deep irregular wounds. Colloids Surf B Biointerfaces 2024; 238:113905. [PMID: 38593680 DOI: 10.1016/j.colsurfb.2024.113905] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/13/2023] [Revised: 03/26/2024] [Accepted: 04/07/2024] [Indexed: 04/11/2024]
Abstract
Hemostasis of deep irregular wounds is a severe problem in clinical practice. The development of rapid-acting hemostatic agents for deep and irregular wound is urgently needed. Here, sodium alginate/carboxycellulose/polydopamine (SA/CNF/PDA) microspheres was prepared by reverse emulsification and crosslinking with Ca2+, and SA/CNF/PDA composite hemostatic microspheres with porous structure were obtained by freeze-drying. SA/CNF/PDA composite hemostatic microspheres exhibited excellent porosity and water absorption which could rapidly absorb blood on the wound surface. Moreover, SA/CNF/PDA composite microspheres demonstrated remarkable hemostatic capabilities both in vitro and in vivo. It exhibited strong hemostatic performance in models of mouse tail-break and liver damage. Especially in liver injury model, it was completely hemostatic in 95 s, and blood loss (19.3 mg). The hemostatic efficacy of the SA/CNF/PDA composite microspheres was amplified through the stimulation of both exogenous and endogenous coagulation pathways. Therefore, SA/CNF/PDA composite hemostatic microspheres are suitable for rapid hemostasis of deep irregular wounds which are potential rapid hemostatic material for surgical application.
Collapse
|
2
|
BMSCs-laden mechanically reinforced bioactive sodium alginate composite hydrogel microspheres for minimally invasive bone repair. Carbohydr Polym 2024; 332:121933. [PMID: 38431401 DOI: 10.1016/j.carbpol.2024.121933] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/03/2023] [Revised: 02/02/2024] [Accepted: 02/06/2024] [Indexed: 03/05/2024]
Abstract
Minimally invasive, efficient, and satisfactory treatment for irregular and lacunar bone defects is still a challenge. Alginate hydrogels serve as promising stem cell (SC) delivery systems for bone regeneration but are limited by low cellular viability, poor osteogenic differentiation, and insufficient mechanical support. Herein, we developed a BMSCs-laden mechanically reinforced bioactive sodium alginate composite hydrogel microspheres (BCHMs) system via a microfluidic method that possesses 1) a uniform size and good injectability to meet clinical bone defects with complex shapes, 2) high cellular viability maintenance and further osteogenic induction capacity, and 3) improved mechanical properties. As the main matrix, the sodium alginate hydrogel maintains the high viability of encapsulated BMSCs and efficient substance exchange. Enhanced mechanical properties and osteogenic differentiation of the BCHMs in vitro were observed with xonotlite (Ca6Si6O17(OH)2, CSH) nanowires incorporated. Furthermore, BCHMs with 12.5 % CSH were injected into rat femoral bone defects, and satisfactory in situ regeneration outcomes were observed. Overall, it is believed that BCHMs expand the application of polysaccharide science and provide a promising injectable bone substitute for minimally invasive bone repair.
Collapse
|
3
|
Fabrication of yeast β-glucan/sodium alginate/γ-polyglutamic acid composite particles for hemostasis and wound healing. Biomater Sci 2024; 12:2394-2407. [PMID: 38502151 DOI: 10.1039/d3bm02068a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/20/2024]
Abstract
Particles with a porous structure can lead to quick hemostasis and provide a good matrix for cell proliferation during wound healing. Recently, many particle-based wound healing materials have been clinically applied. However, these products show good hemostatic ability but with poor wound healing ability. To solve this problem, this study fabricated APGG composite particles using yeast β-glucan (obtained from Saccharomyces cerevisiae), sodium alginate, and γ-polyglutamic acid as the starting materials. The structure of yeast β-glucan was modified with many carboxymethyl groups to obtain carboxymethylated β-glucan, which could coordinate with Ca2+ ions to form a crosslinked structure. A morphology study indicated that the APGG particles showed an irregular spheroidal structure with a low density (<0.1 g cm-3) and high porosity (>40%). An in vitro study revealed that the particles exhibited a low BCI value, low hemolysis ratio, and good cytocompatibility against L929 cells. The APGG particles could quickly stop bleeding in a mouse liver injury model and exhibited better hemostatic ability than the commercially available product Celox. Furthermore, the APGG particles could accelerate the healing of non-infected wounds, and the expression levels of CD31, α-SMA, and VEGF related to angiogenesis were significantly enhanced.
Collapse
|
4
|
Advances of biological macromolecules hemostatic materials: A review. Int J Biol Macromol 2024; 269:131772. [PMID: 38670176 DOI: 10.1016/j.ijbiomac.2024.131772] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/20/2024] [Revised: 04/02/2024] [Accepted: 04/20/2024] [Indexed: 04/28/2024]
Abstract
Achieving hemostasis is a necessary intervention to rapidly and effectively control bleeding. Conventional hemostatic materials currently used in clinical practice may aggravate the damage at the bleeding site due to factors such as poor adhesion and poor adaptation. Compared to most traditional hemostatic materials, polymer-based hemostatic materials have better biocompatibility and offer several advantages. They provide a more effective method of stopping bleeding and avoiding additional damage to the body in case of excessive blood loss. Various hemostatic materials with greater functionality have been developed in recent years for different organs using diverse design strategies. This article reviews the latest advances in the development of polymeric hemostatic materials. We introduce the coagulation cascade reaction after bleeding and then discuss the hemostatic mechanisms and advantages and disadvantages of various polymer materials, including natural, synthetic, and composite polymer hemostatic materials. We further focus on the design strategies, properties, and characterization of hemostatic materials, along with their applications in different organs. Finally, challenges and prospects for the application of hemostatic polymeric materials are summarized and discussed. We believe that this review can provide a reference for related research on hemostatic materials, contributing to the further development of polymer hemostatic materials.
Collapse
|
5
|
Fabrication of polymeric microspheres for biomedical applications. MATERIALS HORIZONS 2024. [PMID: 38567423 DOI: 10.1039/d3mh01641b] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 04/04/2024]
Abstract
Polymeric microspheres (PMs) have attracted great attention in the field of biomedicine in the last several decades due to their small particle size, special functionalities shown on the surface and high surface-to-volume ratio. However, how to fabricate PMs which can meet the clinical needs and transform laboratory achievements to industrial scale-up still remains a challenge. Therefore, advanced fabrication technologies are pursued. In this review, we summarize the technologies used to fabricate PMs, including emulsion-based methods, microfluidics, spray drying, coacervation, supercritical fluid and superhydrophobic surface-mediated method and their advantages and disadvantages. We also review the different structures, properties and functions of the PMs and their applications in the fields of drug delivery, cell encapsulation and expansion, scaffolds in tissue engineering, transcatheter arterial embolization and artificial cells. Moreover, we discuss existing challenges and future perspectives for advancing fabrication technologies and biomedical applications of PMs.
Collapse
|
6
|
What else should hemostatic materials do beyond hemostasis: A review. Mater Today Bio 2024; 25:101008. [PMID: 38495915 PMCID: PMC10940931 DOI: 10.1016/j.mtbio.2024.101008] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/12/2023] [Revised: 01/27/2024] [Accepted: 02/21/2024] [Indexed: 03/19/2024] Open
Abstract
Massive blood loss due to injury is the leading cause of prehospital deaths in disasters and emergencies. Hemostatic materials are used to realize rapid hemostasis and protect patients from death. Researchers have designed and developed a variety of hemostatic materials. However, in addition to their hemostatic effect, hemostatic materials must be endowed with additional functions to meet the practical application requirements in different scenarios. Here, strategies for modifications of hemostatic materials for use in different application scenarios are listed: effective positioning at the site of deep and narrow wounds to stop bleeding, resistance to high blood pressure and wound movement to maintain wound formation, rapid and easy removal from the wound without affecting further treatment after hemostasis is completed, and continued function when retained in the wound as a dressing (such as antibacterial, antiadhesion, tissue repair, etc.). The problems encountered in the practical use of hemostatic materials and the strategies and progress of researchers will be further discussed in this review. We hope to provide valuable references for the design of more comprehensive and practical hemostatic materials.
Collapse
|
7
|
The characterization and analysis of the compound hemostatic cotton based on Ca 2+/poly (vinyl alcohol)/soluble starch-fish skin collagen. Int J Biol Macromol 2024; 262:130084. [PMID: 38350584 DOI: 10.1016/j.ijbiomac.2024.130084] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/06/2023] [Revised: 01/22/2024] [Accepted: 02/08/2024] [Indexed: 02/15/2024]
Abstract
Accidental bleeding is an unavoidable problem in daily life. To avoid the risk of excessive blood loss, it is urgent to design a functional material that can quickly stop bleeding. In this study, an efficient wound dressing for hemostasis was investigated. Based on the characteristics that Ca2+ and fish skin collagen (FSC) could activate the coagulation mechanism, hemostatic cotton was prepared by solvent replacement method using CaCl2, FSC, soluble starch (SS), and polyvinyl alcohol (PVA) as raw materials. The cytotoxicity test showed the Ca2+PVA/FSC-SS hemostatic cottons had good biocompatibility. The activated partial thromboplastin time (APTT) of Ca2+PVA/FSC-SS(4) was 35.34 s, which was 22.07 s faster than that of PVA/FSC-SS, indicating Ca2+PVA/FSC-SS mediated the endogenous coagulation system. In vitro coagulation test, Ca2+PVA/FSC-SS(4) could stop bleeding rapidly within 39.60 ± 5.16 s, and the ability of wound healing was higher than commercial product (Celox). This study developed a rapid procoagulant and hemostatic material, which had a promising application in a variety of environments.
Collapse
|
8
|
Recent research advances on polysaccharide-, peptide-, and protein-based hemostatic materials: A review. Int J Biol Macromol 2024; 261:129752. [PMID: 38280705 DOI: 10.1016/j.ijbiomac.2024.129752] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/18/2023] [Revised: 11/05/2023] [Accepted: 01/23/2024] [Indexed: 01/29/2024]
Abstract
Hemorrhage is a potentially life-threatening emergency that can occur at any time or place. Whether traumatic, congenital, surgical, disease-related, or drug-induced, bleeding can lead to severe complications or death. Therefore, the development of efficient hemostatic materials is critical. However, the results and prognosis demonstrated by clinical means of hemostasis do not reach expectations. With the development of technology, novel hemostatic materials have been developed from polysaccharides (chitosan, hyaluronic acid, alginate, cellulose, cyclodextrins, starch, dextran, and carrageenan), peptides (self-assembling peptides), and proteins (silk fibroin, collagen, gelatin, keratin, and thrombin). These new materials exhibit high hemostatic efficacy due to the enhancement or interaction of various hemostatic mechanisms. The main forms include adhesives, sealants, bandages, hemostatic powders, and hemostatic sponges. This article introduces the clotting process and principles of hemostatic methods and reviews the research on polysaccharide-, peptide-, and protein-based hemostatic materials in the last five years. The design ideas and hemostatic principles of polysaccharide-, peptide-, and protein-based hemostatic materials are mainly introduced. Finally, we summarize material designs, advantages, disadvantages, and challenges regarding hemostatic materials.
Collapse
|
9
|
Cellulose-alginate hydrogels and their nanocomposites for water remediation and biomedical applications. ENVIRONMENTAL RESEARCH 2024; 243:117889. [PMID: 38086501 DOI: 10.1016/j.envres.2023.117889] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/26/2023] [Revised: 11/18/2023] [Accepted: 12/05/2023] [Indexed: 12/17/2023]
Abstract
In the last decade, both cellulose and alginate polysaccharides have been extensively utilized for the synthesis of biocompatible hydrogels because of their alluring characteristics like low cost, biodegradability, hydrophilicity, biodegradability, ease of availability and non-toxicity. The presence of abundant hydrophilic functional groups (like carboxyl and hydroxyl) on the surface of cellulose and alginate or their derivatives makes these materials promising candidates for the preparation of hydrogels with appealing structures and characteristics, leading to growing research in water treatment and biomedical fields. These two polysaccharides are typically blended together to improve hydrogels' desired qualities (mechanical strength, adsorption properties, cellulose/alginate yield). So, keeping in view their extensive applicability, in the present review article, recent advances in the development of cellulose/nanocellulose-alginate-based hydrogels and their relevance in water treatment (adsorption of dyes, heavy metals, etc.) and biomedical field (wound healing, tissue engineering, drug delivery) has been reviewed. Further, impact of other inorganic/organic additives in cellulose/nanocellulose-alginate-based hydrogels properties like contaminants adsorption, drug delivery, tissue engineering, etc., has also been studied. Moreover, the current difficulties and future prospects of nanocellulose-alginate-based hydrogels regarding their water purification and biomedical applications are also discussed at the end.
Collapse
|
10
|
Effects of Synthesis Parameters on Structure and Antimicrobial Properties of Bacterial Cellulose/Hydroxyapatite/TiO 2 Polymer-Ceramic Composite Material. Polymers (Basel) 2024; 16:470. [PMID: 38399848 PMCID: PMC10892185 DOI: 10.3390/polym16040470] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/10/2023] [Revised: 01/25/2024] [Accepted: 02/01/2024] [Indexed: 02/25/2024] Open
Abstract
Bacterial cellulose (BC) is a highly pure polysaccharide biopolymer that can be produced by various bacterial genera. Even though BC lacks functional properties, its porosity, three-dimensional network, and high specific surface area make it a suitable carrier for functional composite materials. In the present study, BC-producing bacteria were isolated from kombucha beverage and identified using a molecular method. Two sets of the BC hydrogels were produced in static conditions after four and seven days. Afterwards, two different synthesis pathways were applied for BC functionalization. The first method implied the incorporation of previously synthesized HAp/TiO2 nanocomposite using an immersion technique, while the second method included the functionalization of BC during the synthesis of HAp/TiO2 nanocomposite in the reaction mixture. The primary goal was to find the best method to obtain the functionalized material. Physicochemical and microstructural properties were analyzed by SEM, EDS, FTIR, and XRD methods. Further properties were examined by tensile test and thermogravimetric analysis, and antimicrobial activity was assessed by a total plate count assay. The results showed that HAp/TiO2 was successfully incorporated into the produced BC hydrogels using both methods. The applied methods of incorporation influenced the differences in morphology, phase distribution, mechanical and thermal properties, and antimicrobial activity against Staphylococcus aureus (ATCC 25923), Escherichia coli (ATCC 25922), Proteus mirabilis (ATCC 12453), and Candida albicans (ATCC 10231). Composite material can be recommended for further development and application in environments that are suitable for diseases spreading.
Collapse
|
11
|
Preparation and application of hemostatic microspheres containing biological macromolecules and others. Int J Biol Macromol 2024; 257:128299. [PMID: 38008144 DOI: 10.1016/j.ijbiomac.2023.128299] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/02/2023] [Revised: 11/18/2023] [Accepted: 11/18/2023] [Indexed: 11/28/2023]
Abstract
Bleeding from uncontrollable wounds can be fatal, and the body's clotting mechanisms are unable to control bleeding in a timely and effective manner in emergencies such as battlefields and traffic accidents. For irregular and inaccessible wounds, hemostatic materials are needed to intervene to stop bleeding. Hemostatic microspheres are promising for hemostasis, as their unique structural features can promote coagulation. There is a wide choice of materials for the preparation of microspheres, and the modification of natural macromolecular materials such as chitosan to enhance the hemostatic properties and make up for the deficiencies of synthetic macromolecular materials makes the hemostatic microspheres multifunctional and expands the application fields of hemostatic microspheres. Here, we focus on the hemostatic mechanism of different materials and the preparation methods of microspheres, and introduce the modification methods, related properties and applications (in cancer therapy) for the structural characteristics of hemostatic microspheres. Finally, we discuss the future trends of hemostatic microspheres and research opportunities for developing the next generation of hemostatic microsphere materials.
Collapse
|
12
|
Dual-Cross-Linked PEI/PVA Hydrogel for pH-Responsive Drug Delivery. Biomacromolecules 2023; 24:5364-5370. [PMID: 37906107 DOI: 10.1021/acs.biomac.3c00824] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/02/2023]
Abstract
Herein, a pH-responsive dual cross-linked hydrogel for controlled drug release is presented. The hydrogel was constructed with reversible borate ester bonds and crystalline poly(vinyl alcohol). By changing the environmental pH, its physicochemical characteristics, including rheological properties, mechanical properties, microstructural features, and the biocompatibility of the gels, were evaluated. The gels at tumor acidic conditions exhibited swelling and lower compressive strength and modulus than those in a physiological environment, which was attributed to the pH-responsive borate ester bonds and the protonation of amine groups on the PEI polyelectrolyte. Importantly, the drug-encapsulated biocompatible hydrogel showed sustained and increased release under an acidic environment, and it followed the Fickian diffusion mechanism. Therefore, it exemplifies that borate ester bond-based pH-responsive biomaterials have high promise in biomedical research, especially for drug delivery.
Collapse
|
13
|
Nanocomposite Hydrogel Engineered Janus Membrane for Membrane Distillation with Robust Fouling, Wetting, and Scaling Resistance. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2023; 57:15725-15735. [PMID: 37787747 DOI: 10.1021/acs.est.3c04540] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/04/2023]
Abstract
Membrane distillation (MD) is considered to be rather promising for high-salinity wastewater reclamation. However, its practical viability is seriously challenged by membrane wetting, fouling, and scaling issues arising from the complex components of hypersaline wastewater. It remains extremely difficult to overcome all three challenges at the same time. Herein, a nanocomposite hydrogel engineered Janus membrane has been facilely constructed for desired wetting/fouling/scaling-free properties, where a cellulose nanocrystal (CNC) composite hydrogel layer is formed in situ atop a microporous hydrophobic polytetrafluoroethylene (PTFE) substrate intermediated by an adhesive layer. By the synergies of the elevated membrane liquid entry pressure, inhibited surfactant diffusion, and highly hydratable surface imparted by the hydrogel/CNC (HC) layer, the resultant HC-PTFE membrane exhibits robust resistance to surfactant-induced wetting and oil fouling during 120 h of MD operation. Meanwhile, owing to the dense and hydroxyl-abundant surface, it is capable of mitigating gypsum scaling and scaling-induced wetting, resulting in a high normalized flux and low distillate conductivity at a concentration factor of 5.2. Importantly, the HC-PTFE membrane enables direct desalination of real hypersaline wastewater containing broad-spectrum foulants with stable vapor flux and robust salt rejection (99.90%) during long-term operation, demonstrating its great potential for wastewater management in industrial scenarios.
Collapse
|
14
|
Recent advances in cellulose nanocrystals-based antimicrobial agents. Carbohydr Polym 2023; 315:120987. [PMID: 37230623 DOI: 10.1016/j.carbpol.2023.120987] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/14/2022] [Revised: 04/02/2023] [Accepted: 05/03/2023] [Indexed: 05/27/2023]
Abstract
Over the past five years, there has been growing interest in the design of modified cellulose nanocrystals (CNCs) as nanoscale antimicrobial agents in potential end-user applications such as food preservation/packaging, additive manufacturing, biomedical and water purification. The interest of applying CNCs-based antimicrobial agents arise due to their abilities to be derived from renewable bioresources and their excellent physicochemical properties including rod-like morphologies, large specific surface area, low toxicity, biocompatibility, biodegradability and sustainability. The presence of ample surface hydroxyl groups further allows easy chemical surface modifications for the design of advanced functional CNCs-based antimicrobial materials. Furthermore, CNCs are used to support antimicrobial agents that are subjected to instability issues. The current review summarizes recent progress in CNC-inorganic hybrid-based materials (Ag and Zn nanoparticles, other metal/metal oxide) and CNC-organic hybrid-based materials (polymers, chitosan, simple organic molecules). It focuses on their design, syntheses and applications with a brief discussion on their probable modes of antimicrobial action whereby the roles of CNCs and/or the antimicrobial agents are highlighted.
Collapse
|
15
|
Preparation strategy of hydrogel microsphere and its application in skin repair. Front Bioeng Biotechnol 2023; 11:1239183. [PMID: 37555079 PMCID: PMC10405935 DOI: 10.3389/fbioe.2023.1239183] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/13/2023] [Accepted: 07/12/2023] [Indexed: 08/10/2023] Open
Abstract
In recent years, hydrogel microsphere has attracted much attention due to its great potential in the field of skin repair. This paper reviewed the recent progress in the preparation strategy of hydrogel microsphere and its application in skin repair. In this review, several preparation methods of hydrogel microsphere were summarized in detail. In addition, the related research progress of hydrogel microspheres for skin repair was reviewed, and focused on the application of bioactive microspheres, antibacterial microspheres, hemostatic microspheres, and hydrogel microspheres as delivery platforms (hydrogel microspheres as a microcarrier of drugs, bioactive factors, or cells) in the field of skin repair. Finally, the limitations and future prospects of the development of hydrogel microspheres and its application in the field of skin repair were presented. It is hoped that this review can provide a valuable reference for the development of the preparation strategy of hydrogel microspheres and promote the application of hydrogel microspheres in skin repair.
Collapse
|
16
|
Hollow Particles Obtained by Prilling and Supercritical Drying as a Potential Conformable Dressing for Chronic Wounds. Gels 2023; 9:492. [PMID: 37367162 DOI: 10.3390/gels9060492] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/22/2023] [Revised: 06/02/2023] [Accepted: 06/14/2023] [Indexed: 06/28/2023] Open
Abstract
The production of aerogels for different applications has been widely known, but the use of polysaccharide-based aerogels for pharmaceutical applications, specifically as drug carriers for wound healing, is being recently explored. The main focus of this work is the production and characterization of drug-loaded aerogel capsules through prilling in tandem with supercritical extraction. In particular, drug-loaded particles were produced by a recently developed inverse gelation method through prilling in a coaxial configuration. Particles were loaded with ketoprofen lysinate, which was used as a model drug. The core-shell particles manufactured by prilling were subjected to a supercritical drying process with CO2 that led to capsules formed by a wide hollow cavity and a tunable thin aerogel layer (40 μm) made of alginate, which presented good textural properties in terms of porosity (89.9% and 95.3%) and a surface area up to 417.0 m2/g. Such properties allowed the hollow aerogel particles to absorb a high amount of wound fluid moving very quickly (less than 30 s) into a conformable hydrogel in the wound cavity, prolonging drug release (till 72 h) due to the in situ formed hydrogel that acted as a barrier to drug diffusion.
Collapse
|
17
|
A quaternized chitosan and carboxylated cellulose nanofiber-based sponge with a microchannel structure for rapid hemostasis and wound healing. Int J Biol Macromol 2023; 233:123631. [PMID: 36775224 DOI: 10.1016/j.ijbiomac.2023.123631] [Citation(s) in RCA: 11] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/21/2022] [Revised: 01/13/2023] [Accepted: 02/06/2023] [Indexed: 02/12/2023]
Abstract
A hemostatic sponge should perform rapid hemostasis and exhibit antibacterial properties, whilst being non-toxic, breathable, and degradable. This study prepared a hemostatic sponge (CQTC) with microchannels, specifically a microchannel structure based on quaternized chitosan (QCS) and carboxylated cellulose nanofibers (CCNF) obtained by using tannic acid and Cu2+ complex (crosslinking agent). The sponge had low density and high porosity, while being degradable. The combination of microchannels and three-dimensional porous structure of CQTC leads to excellent liquid absorption and hemostasis ability, based on a liquid absorption rate test and in vitro hemostasis experiment. In addition, CQTC exhibited excellent antibacterial activity against both gram-negative and gram-positive bacteria, and it promoted wound healing. In conclusion, this porous and microchannel hemostatic sponge has broad application prospects as a clinical wound hemostatic material.
Collapse
|
18
|
A self-gelling powder based on polyacrylic acid/polyacrylamide/quaternate chitosan for rapid hemostasis. Int J Biol Macromol 2023; 232:123449. [PMID: 36709811 DOI: 10.1016/j.ijbiomac.2023.123449] [Citation(s) in RCA: 11] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/04/2022] [Revised: 01/12/2023] [Accepted: 01/24/2023] [Indexed: 01/28/2023]
Abstract
In order to improve the hemostatic effect of the hemostatic dressing for non-compressible wounds, unknown bleeding points and irregularly shaped wounds, a self-gelling hemostasis powder based on polyacrylic acid/polyacrylamide/quaternate chitosan (PAA/PAM/QCS) is prepared in this study. When in contact with water, the PAA/PAM/QCS can fuse and rapidly form a stable hydrogel in a short time (< 0.25 min). The PAA/PAM ratio is the main parameter that modulates the formation of the self-gel. The PAA/PAM self-gel can be formed only when the PAA/PAM ratio is 5:5, and the introduction of QCS does not influence the self-gelling behaviors and hydrogel stability. Moreover, the PAA/PAM/QCS self-gel shows good adhesive properties on wet tissue surfaces. In addition, the introduction of QCS improves the antibacterial activity of the self-gelling hemostasis powder. Furthermore, the prepared PAA/PAM/QCS powder can rapidly adsorb lots of blood, aggregate blood cells and platelets. The hemostatic results in vivo show that PAA/PAM/QCS powder is superior to the control group and commercial product groups (chitosan powder) with performance similar to hemostatic zeolite in terms of the amount of bleeding and hemostatic time. Therefore, the PAA/PAM/QCS self-gelling powder shows great application prospects for rapid hemostasis.
Collapse
|
19
|
Euryale ferox stem-inspired anisotropic quaternized cellulose/xanthan-based antibacterial sponge with high absorbency and compressibility for noncompressible hemorrhage. Int J Biol Macromol 2023; 237:124166. [PMID: 36965567 DOI: 10.1016/j.ijbiomac.2023.124166] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/03/2023] [Revised: 03/01/2023] [Accepted: 03/21/2023] [Indexed: 03/27/2023]
Abstract
Uncontrollable hemorrhage from deep noncompressible wounds remains an intractable challenge. Herein, inspired by the euryale ferox stem which is capable of transporting water and nutrient substances efficiently along longitudinally aligned channels, an anisotropic sponge with rapidly liquid absorption capacity, excellent mechanical compressibility and antibacterial property based on quaternized cellulose (QC), xanthan gum (XG) and reduced graphene oxide (rGO), was constructed. The euryale ferox stem-like structure and multiple interactions, involving hydrogen bonding, electrostatic interaction and chemical crosslinking, endowed the sponge with excellent fatigue resistance, elasticity and efficient liquid absorption capacity. In vivo rat liver injury, tail amputation and liver noncompressible hemorrhage model experiments confirmed that the sponge exhibited superior hemostatic performance than commercial gelatin sponge, attributing to the positive charge, efficient absorption capacity and rough surface of the sponge, which synergistically promoting the aggregation and activation of red blood cells and platelets as well as formation of fibrin network, leading to accelerated blood coagulation process. Besides, the sponge showed favorable cytocompatibility, hemocompatibility and antibacterial property. Overall, the bioinspired sponge had fantastic potential for controlling deep noncompressible hemorrhage and providing a new idea for designing hemostatic materials.
Collapse
|
20
|
Chitosan-based carbon nitride-polydopamine‑silver composite dressing with antibacterial properties for wound healing. Carbohydr Polym 2023; 303:120436. [PMID: 36657833 DOI: 10.1016/j.carbpol.2022.120436] [Citation(s) in RCA: 12] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/28/2022] [Revised: 12/01/2022] [Accepted: 12/03/2022] [Indexed: 12/13/2022]
Abstract
Infection represents a major clinical barrier that delays wound healing, while the overuse of antibiotics can lead to bacterial resistance. Hence, it is of particular important to develop a new type of dressing to combat bacterial resistance. Herein, a carbon nitride-polydopamine‑silver complex (C3N4-PDA-Ag) was prepared using the photocatalyst C3N4 and silver nanoparticles (Ag NPs) to achieve a synergistic antimicrobial effect. The solution casting method was then employed to further modify the C3N4-PDA-Ag complex by compounding it with chitosan (CS), thereby forming a C3N4-PDA-Ag@CS film. The results revealed that the C3N4-PDA-Ag@CS film exhibits superior antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa compared to the CS group. The hemolysis, cytotoxicity, and in vivo implantation experiments indicated that the composite film possesses excellent in vitro and in vivo biocompatibility. In addition, the composite dressing promoted wound healing in infected mice by facilitating collagen deposition and accelerating epidermal regeneration. Collectively, the findings of this study clearly demonstrate that the C3N4-PDA-Ag@CS composite dressing has excellent antibacterial properties, biocompatibility, and enhances wound healing, thus providing a strategy for the application of photocatalytic materials for the treatment of infected wounds.
Collapse
|
21
|
Recent progress in polymeric biomaterials and their potential applications in skin regeneration and wound care management. J Drug Deliv Sci Technol 2023. [DOI: 10.1016/j.jddst.2023.104319] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/06/2023]
|
22
|
New insights into balancing wound healing and scarless skin repair. J Tissue Eng 2023; 14:20417314231185848. [PMID: 37529248 PMCID: PMC10388637 DOI: 10.1177/20417314231185848] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/01/2023] [Accepted: 06/17/2023] [Indexed: 08/03/2023] Open
Abstract
Scars caused by skin injuries after burns, wounds, abrasions and operations have serious physical and psychological effects on patients. In recent years, the research of scar free wound repair has been greatly expanded. However, understanding the complex mechanisms of wound healing, in which various cells, cytokines and mechanical force interact, is critical to developing a treatment that can achieve scarless wound healing. Therefore, this paper reviews the types of wounds, the mechanism of scar formation in the healing process, and the current research progress on the dual consideration of wound healing and scar prevention, and some strategies for the treatment of scar free wound repair.
Collapse
|
23
|
Comparison of pre-treatments mediated by endoglucanase and TEMPO oxidation for eco-friendly low-cost energy production of cellulose nanofibrils. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:4934-4948. [PMID: 35978240 DOI: 10.1007/s11356-022-22575-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/17/2022] [Accepted: 08/12/2022] [Indexed: 06/15/2023]
Abstract
Specific kinds of enzymes have been used as an eco-friendly pre-treatment for mechanical extraction of cellulose nanofibrils (CNFs) from vegetal pulps. Another well-established pre-treatment is the 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)-mediated oxidation, which has gained considerable attention. Pre-treatments assist in fiber swelling, facilitating mechanical fibrillation, and reducing energy consumption; however, some of these methods are extremely expensive. This work aimed to evaluate the influence of enzymatic pre-treatment with endoglucanase on the energy consumption during mechanical fibrillation of cellulose pulps. Bleached pulps from Eucalyptus sp. and Pinus sp. were pre-treated with endoglucanase enzyme compared to TEMPO-meditated oxidation. Average diameters of CNFs pre-treated with enzymes were close to that found for TEMPO-oxidized nanofibrils (TOCNFs). Results showed that enzymatic pre-treatment did not significantly modify the pulp chemical and morphological characteristics with efficient stabilization of the CNFs suspension at higher supernatant turbidity. Energy consumption of pulps treated with endoglucanase enzymes was lower than that shown by pulps treated with TEMPO, reaching up to 58% of energy savings. The enzyme studied in the pulp treatment showed high efficiency in reducing energy consumption during mechanical fibrillation and production of films with high mechanical quality, being an eco-friendly option for pulp treatment.
Collapse
|
24
|
Self-assembled photothermal conversion shell coating on the surface of CA/SP for photothermal bacteriostasis and rapid wound healing. Colloids Surf B Biointerfaces 2022. [DOI: 10.1016/j.colsurfb.2022.112964] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
|
25
|
Fabrication of microspheres containing coagulation factors by reverse microemulsion method for rapid hemostasis and wound healing. Colloids Surf B Biointerfaces 2022; 218:112742. [DOI: 10.1016/j.colsurfb.2022.112742] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/30/2022] [Revised: 07/17/2022] [Accepted: 07/30/2022] [Indexed: 02/07/2023]
|
26
|
Calcium alginate/silk fibroin peptide/Bletilla striata polysaccharide blended microspheres loaded with tannic acid for rapid wound healing. Int J Biol Macromol 2022; 220:1329-1344. [PMID: 36116592 DOI: 10.1016/j.ijbiomac.2022.09.123] [Citation(s) in RCA: 11] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/01/2022] [Revised: 09/10/2022] [Accepted: 09/14/2022] [Indexed: 01/01/2023]
Abstract
Biodegradable natural polymers are receiving increasing attention as potential candidates for wound dressing. In the present study, composite microspheres (mCSB) based on calcium alginate (CA), silk fibroin peptide (SP), and Bletilla striata polysaccharide (BSP) were prepared by the reverse emulsion method. The excellent swelling properties of microspheres enable them to rapidly promote thrombosis. Microspheres can increase the platelet aggregation index to 1.5 and the aggregation rate of red blood cells to as high as 80 %. Furthermore, tannic acid (TA)-loaded microspheres demonstrate a slow-release effect on TA; this allows the microspheres to exhibit good long-lasting antibacterial properties. Due to the synergistic effects of SP and TA, the cell senescence was delayed, with a 126.69 % survival rate of fibroblasts after 3 days of incubation. In addition, TA led to a rapid reduction in inflammation levels, with a wound closure rate of >92.80 % within 7 days. The multifunctional TA-loaded mCSB has great application potential for rapid wound healing and the treatment of wound hemostasis.
Collapse
|