Efficient extraction of nanocellulose from lignocellulose using aqueous butanediol fractionation to improve the performance of waterborne wood coating

Biobased amphoteric aerogel with core-shell structure for the hierarchically efficient adsorption of anionic and cationic dyes

Efficient and simultaneous removal of anionic and cationic dyes from wastewater using low-cost and environmentally-friendly adsorbent is highly required. Herein, the carboxylated cellulose (carboxyl content: 2.97 mmol/g) derived from pomelo peel was extracted by a one-step H2O2/H2SO4-mediated oxidation method. Subsequently, a novel pomelo-peel cellulose/chitosan/sodium alginate (PCS) amphoteric aerogel with a specific core-shell structure was synthesized by multiple physical cross-linking strategies. The shell layer and core layer of the optimized P3CS0.75 aerogel can selectively adsorb cationic dyes and anionic dyes, in which, the theoretical maximum adsorption capacities were 888.27 mg/g and 1816.87 mg/g towards methylene blue (MB) and Congo red (CR), respectively. Especially, the aerogel's core/shell layer exhibited hierarchical adsorption behavior without overlapping sites even in the binary dye systems. The adsorption performance of obtained amphoteric aerogel remained effective in a wide pH range and under different practical water systems. Moreover, the removal efficiencies for MB and CR were slightly reduced from 90.76 % and 99.66 % to 88.08 % and 91.39 %, respectively, after 5 adsorption-desorption cycles, and the aerogel's structural integrity was also maintained due to its good compressive strength (487.16 KPa). In addition, the adsorption mechanism of PCS aerogel was investigated using adsorption kinetics, isotherm, thermodynamics, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. It was proved that the adsorption process was endothermic spontaneous-monolayer adsorption driven by electrostatic attraction and hydrogen bonding. Therefore, the prepared biobased aerogel was expected to be a prospective material for removing mixed dyes from wastewater.

From farm to function: Exploring new possibilities with jute nanocellulose applications

Recent scientific interest has surged in the application of bioresources within nanotechnology, primarily because of their eco-friendly nature, wide availability, and cost-effectiveness. Jute is globally recognized as the second most prevalent source of natural cellulose fibers, and it produces a significant quantity of jute sticks as a byproduct. Nanocellulose (NC), which includes cellulose nanofibrils (CNF) and cellulose nanocrystals (CNC), exhibits exceptional properties such as high strength, toughness, crystallinity, thermal stability, and stiffness. These attributes enable its versatile use across various sectors. The extensive surface areas and abundant hydroxyl groups of nanocellulose allow for diverse surface modifications, facilitating the design of advanced functional materials. This comprehensive review provides an overview of recent advancements in the synthesis, characterization, and potential applications of nanocellulose derived from jute. As a versatile natural fiber, jute holds immense potential across various research domains, including nanocellulose synthesis, scaffold fabrication, nanocarbon material preparation, life sciences, electronics and energy storage devices, drug delivery systems, nanomaterial synthesis, food packaging and paper industries. Additionally, its use extends to polymeric nanocomposites, sensors, and coatings. This study summarizes the extensive utilization of jute, emphasizing its versatility and potential across diverse research fields.

Effect of hornification on the isolation of anionic cellulose nanofibrils from Kraft pulp via maleic anhydride esterification

Cellulose nanofibrils (CNF) isolation based on a catalyst-free maleic anhydride esterification has proven to be effective, however, the effects of pulp hornification on CNF isolation by this strategy have yet to be explored, which could present significant impacts for CNF isolation. Herein, dried northern bleached softwood Kraft pulp (D-NBSK) and never-dried northern bleached softwood Kraft pulp (ND-NBSK) were selected as the substrates. After esterification with maleic anhydride (MA), the esterified ND-NBSK pulp (E-ND) shows a significantly smaller size and more fragmented structure than the esterified D-NBSK pulp (E-D). Meanwhile, higher degree of esterification can be realized for the never dried pulp as compared to the dried pulp, which is corroborated by the significantly stronger characteristic peaks of CO (1720 cm-1) and -COO- (1575 cm-1) from the FTIR spectra and the higher surface charge content (0.86 ± 0.04 mmol/g vs. 0.55 ± 0.05 mmol/g). A comparison of the characteristics of the resulting CNF similarly demonstrated the negative impact of hornification. Overall, this work indicates that hornification tends to reduce the accessibility of chemical reagents to the pulp, leading to insufficient deconstruction. Such negative impact of hornification should be considered when performing nanocellulose isolation, especially when using pulp as feedstock.

Nanotechnology in wood science: Innovations and applications

Application of nanomaterials is gaining tremendous interest in the field of wood science and technology for value addition and enhancing performance of wood and wood-based composites. This review focuses on the use of nanomaterials in improving the properties of wood and wood-based materials and protecting them from weathering, biodegradation, and other deteriorating agents. UV-resistant, self-cleaning (superhydrophobic) surfaces with anti-microbial properties have been developed using the extraordinary features of nanomaterials. Scratch-resistant nano-coatings also improve durability and aesthetic appeal of wood. Moreover, nanomaterials have been used as wood preservatives for increasing the resistance against wood deteriorating agents such as fungi, termites and borers. Wood can be made more resistant to ignition and slower to burn by introducing nano-clays or nanoparticles of metal-oxides. The use of nanocellulose and lignin nanoparticles in wood-based products has attracted huge interest in developing novel materials with improved properties. Nanocellulose and lignin nanoparticles derived/synthesized from woody biomass can enhance the mechanical properties such as strength and stiffness and impart additional functionalities to wood-based products. Cellulose nano-fibres/crystals find application in wide areas of materials science like reinforcement for composites. Incorporation of nanomaterials in resin has been used to enhance specific properties of wood-based composites. This review paper highlights some of the advancements in the use of nanotechnology in wood science, and its potential impact on the industry.