Synthesis and catalytic evaluation of CoMo/SBA-15 catalysts for oxidative removal of dibenzothiophene from a model diesel

Investigations of the ODS process utilizing CNT- and CNF-based WO3 catalysts for environmental depollution: experimental and theoretical aspects

In this contribution, CoW/X materials (X = CNT or CNF) were utilized as oxidative desulfurization (ODS) catalysts for the removal of dibenzothiophene (DBT) from a model fuel (n-decane), incorporating the H₂O₂ as an efficient oxidant. Different operating conditions were investigated. Both compounds revealed high desulfurization efficiency using milder operating conditions leading to low levels of the DBT compound since only 1 h while using a low ratio of H₂O₂/S = 6. Among synthesized compounds, the CoW (15)/CNT showed superior DBT conversion through the ODS process. In other words, the highest sulfur removal efficiency of 100% for a feed sulfur content of 500 ppm was determined in a 40-min duration under optimum conditions. This was satisfyingly more effective than a recently reported CoW (20)/rGO catalyst. The characterization of synthesized catalysts was performed in order to evaluate their physicochemical properties. Moreover, product identification of the oxidation desulfurization process was performed using the GC-Mass, FTIR, and NMR techniques where it was found that this process was that of a single product. These experimental studies were complemented with density functional theory (DFT) investigations, which indeed shed important light on understanding the adsorption mechanisms as well as electronic properties of the system undertaken.

Ultrasound-Assisted Hydrothermal Synthesis of V2O5/Zr-SBA-15 Catalysts for Production of Ultralow Sulfur Fuel

This work reports the results of the ultrasound-assisted hydrothermal synthesis of two sets of V2O5 dispersed on SBA-15 and Zr doped SBA-15 catalysts used for the oxidation of dibenzothiophene (DBT) in a model diesel via the combination of oxidation, catalysis, and extraction technical route. These catalysts contained Lewis acidity as major and Brønsted acidity as minor. The amount of acidity varied with the content of vanadia and zirconium doping. It was found that DBT conversion is very sensitive to the Lewis acidity. DBT conversion increased by increasing the vanadium content and correlated well with the amount of surface Lewis acidity. Under the optimal experimental condition (Reaction temperature: 60 °C, reaction time 40 min, catalyst concentration: 1 g/L oil; H2O2/DBT mole ratio = 10), the 30% V2O5/SBA-15 and 30% V2O5/Zr-SBA-15 catalysts could convert more than 99% of DBT. Two reaction pathways of DBT oxidation involving vanadia surface structure, Lewis acidity, and peroxometallic complexes were proposed. When the vanadia loading V2O5 ≤ 10 wt%, the oxidative desulfurization (ODS) went through the Pathway I; in the catalysts with moderate vanadia content (V2O5 = 20–30 wt%), ODS proceeded via the Pathways II or/and the Pathway I.

SBA-15 Anchored Metal Containing Catalysts in the Oxidative Desulfurization Process

Recalcitrant sulfur compounds are common impurities in crude oil. During combustion they produce SOx derivatives that are able to affect the atmospheric ozone layer, increasing the formation of acid rains, and reducing the life of the engine due to corrosion. In the last twenty years, many efforts have been devoted to develop conventional hydrodesulfurization (HDS) procedures, as well as alternative methods, such as selective adsorption, bio-desulfurization, oxidative desulfurization (ODS) under extractive conditions (ECODS), and others. Among them, the oxidative procedures have been usually accomplished by the use of toxic stoichiometric oxidants, namely potassium permanganate, sodium bromate and carboxylic and sulfonic peracids. As an alternative, increasing interest is devoted to selective and economical procedures based upon catalytic methods. Heterogeneous catalysis is of relevance in industrial ODS processes, since it reduces the leaching of active species and favors the recovery and reuse of the catalyst for successive transformations. The heterogenization of different types of high-valent metal transition-based organometallic complexes, able to promote the activation of stoichiometric benign oxidants like peroxides, can be achieved using various solid supports. Many successful cases have been frequently associated with the use of mesoporous silicas that have the advantage of easy surface modification by reaction with organosilanes, facilitating the immobilization of homogeneous catalysts. In this manuscript the application of SBA-15 as efficient support for different active metal species, able to promote the catalytic ODS of either model or real fuels is reviewed, highlighting its beneficial properties such as high surface area, narrow pore size distribution and tunable pore diameter dimensions. Related to this topic, the most relevant advances recently published, will be discussed and critically described.

Improving the Catalytic Performance of Keggin [PW12O40]3- for Oxidative Desulfurization: Ionic Liquids versus SBA-15 Composite

Different methodologies were used to increase the oxidative desulfurization efficiency of the Keggin phosphotungstate [PW₁₂O₄₀]^3- (PW₁₂). One possibility was to replace the acid proton by three different ionic liquid cations, forming the novel hybrid polyoxometalates: [BMIM]₃PW₁₂ (BMIM as 1-butyl-3-methylimidazolium), [BPy]₃PW₁₂ (BPy as 1-butylpyridinium) and [HDPy]₃PW₁₂ (HDPy as hexadecylpyridinium. These hybrid Keggin compounds showed high oxidative desulfurization efficiency in the presence of [BMIM]PF₆ solvent, achieving complete desulfurization of multicomponent model diesel (2000 ppm of S) after only 1 h, using a low excess of oxidant (H₂O₂/S = 8) at 70 °C. However, their stability and activity showed some weakness in continuous reused oxidative desulfurization cycles. An improvement of stability in continuous reused cycles was reached by the immobilization of the Keggin polyanion in a strategic positively-charged functionalized-SBA-15 support. The PW₁₂@TM⁻SBA-15 composite (TM is the trimethylammonium functional group) presented similar oxidative desulfurization efficiency to the homogeneous IL⁻PW₁₂ compounds, having the advantage of a high recycling capability in continuous cycles, increasing its activity from the first to the consecutive cycles. Therefore, the oxidative desulfurization system catalyzed by the Keggin-type composite has high performance under sustainable operational conditions, avoids waste production during recycling and allows catalyst recovery.

Oxidative desulfurization of dibenzothiophene using a catalyst of molybdenum supported on modified medicinal stone

In this paper, the performance of catalytic oxidative desulfurization from model oil was studied using a catalyst of molybdenum supported on modified medicinal stone (Mo/MMS).