Guidelines for optimization of catalytic activity of 3d transition metal oxide catalysts in N2O decomposition by potassium promotion

Electrochemical sensing mechanism of ammonium ions over an Ag/TiO2 composite electrode modified by hematite

Here, we demonstrate a new electrochemical sensing mechanism of ammonium ions (NH₄⁺) involving a two-electron oxygen reduction reaction (ORR) and a hydrazine reaction. The NH₄⁺ are electrooxidized to hydrazine by H₂O₂ derived from the ORR over a self-supporting Ag/TiO₂ nanotube array composite electrode modified by hematite (Ag/Fe₂O₃/TNTs). The Ag/Fe₂O₃/TNT sensor exhibits a high sensitivity of 1876 µA mM^-1 cm^-2 with a detection limit of 0.18 µM under non-alkaline conditions, a short response time of 3 s, good reproducibility, and fine selectivity among various interferents, and is also successfully used in real water bodies to display high accuracy. Furthermore, this new mechanism has a certain universality in a range of Ag (main catalyst)/transition metal oxide (cocatalyst)/TNT sensing systems. This work offers a new design basis for the urgently needed electrochemical ammonia nitrogen sensors.

Application Prospect of K Used for Catalytic Removal of NOx, COx, and VOCs from Industrial Flue Gas: A Review

NOx, COx, and volatile organic compounds (VOCs) widely exist in motor vehicle exhaust, coke oven flue gas, sintering flue gas, and pelletizing flue gas. Potassium species have an excellent promotion effect on various catalytic reactions for the treatment of these pollutants. This work reviews the promotion effects of potassium species on the reaction processes, including adsorption, desorption, the pathway and selectivity of reaction, recovery of active center, and effects on the properties of catalysts, including basicity, electron donor characteristics, redox property, active center, stability, and strong metal-to support interaction. The suggestions about how to improve the promotion effects of potassium species in various catalytic reactions are put forward, which involve controlling carriers, content, preparation methods and reaction conditions. The promotion effects of different alkali metals are also compared. The article number about commonly used active metals and promotion ways are also analyzed by bibliometric on NOx, COx, and VOCs. The promotion mechanism of potassium species on various reactions is similar; therefore, the application prospect of potassium species for the coupling control of multi-pollutants in industrial flue gas at low-temperature is described.

Cobalt Based Catalysts on Alkali-Activated Zeolite Foams for N2O Decomposition

In this work, we studied the effect of alkali-activated zeolite foams modifications on properties and catalytic activity of cobalt phases in the process of catalytic decomposition of N2O. The zeolite foam supports were prepared by alkali activation of natural zeolite followed by acid leaching and ion exchange. The cobalt catalysts were synthesised by a different deposition technique (direct ion exchange (DIE) and incipient wetness impregnation (IWI) method of cobalt on zeolite foams. For comparison, catalysts on selected supports were prepared and the properties of all were compared in catalytic tests in the pellet form and as crushed catalysts to determine the effect of internal diffusion. The catalysts and supports were in detail characterized by a variety of techniques. The catalyst activity strongly depended on the structure of support and synthesis procedure of a cobalt catalyst. Ion exchange method provided active phase with higher surface areas and sites with better reducibility, both of these factors contributed to higher N2O conversions of more than 80% at 450 °C. A large influence can also be attributed to the presence of alkali metals, in particular, potassium, which resulted in a modification of electronic and acid base properties of the cobalt oxide phase on the catalyst surface. The promotional effect of potassium is better reducibility of cobalt species.

Contrasting Effects of Potassium Addition on M3O4 (M = Co, Fe, and Mn) Oxides during Direct NO Decomposition Catalysis

While the promotional effect of potassium on Co3O4 NO decomposition catalytic performance is established in the literature, it remains unknown if K is also a promoter of NO decomposition over similar simple first-row transition metal spinels like Mn3O4 and Fe3O4. Thus, potassium was impregnated (0.9–3.0 wt.%) on Co3O4, Mn3O4, and Fe3O4 and evaluated for NO decomposition reactivity from 400–650 °C. The activity of Co3O4 was strongly dependent on the amount of potassium present, with a maximum of ~0.18 [(µmol NO to N2) g−1 s−1] at 0.9 wt.% K. Without potassium, Fe3O4 exhibited deactivation with time-on-stream due to a non-catalytic chemical reaction with NO forming α-Fe2O3 (hematite), which is inactive for NO decomposition. Potassium addition led to some stabilization of Fe3O4, however, γ-Fe2O3 (maghemite) and a potassium–iron mixed oxide were also formed, and catalytic activity was only observed at 650 °C and was ~50× lower than 0.9 wt.% K on Co3O4. The addition of K to Mn3O4 led to formation of potassium–manganese mixed oxide phases, which became more prevalent after reaction and were nearly inactive for NO decomposition. Characterization of fresh and spent catalysts by scanning electron microscopy and energy dispersive X-ray analysis (SEM/EDX), in situ NO adsorption Fourier transform infrared spectroscopy, temperature programmed desorption techniques, X-ray powder diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) revealed the unique potassium promotion of Co3O4 for NO decomposition arises not only from modification of the interaction of the catalyst surface with NOx (increased potassium-nitrite formation), but also from an improved ability to desorb oxygen as product O2 while maintaining the integrity and purity of the spinel phase.

Low-temperature selective catalytic reduction of N2O by CO over Fe-ZSM-5 catalysts in the presence of O2

Nitrous oxide (N₂O) is an important ozone-depletion substance and greenhouse gas. Selective catalytic reduction (SCR) of N₂O by CO is considered an effective method for N₂O elimination. However, O₂ exhibited a significant inhibition effect on the catalytic performance of N₂O reduction by CO. A series of iron-based catalysts were prepared to investigate the effect of O₂ in SCR of N₂O by CO. The Fe-Z-pH2 (Fe-ZSM-5 ion-exchanged under pH of 2) catalyst manifested superior activity at low temperature and excellent O₂ resistance in N₂O reduction process. The characterization results from UV-vis DR spectra and XPS indicated that α-sites are the main active sites in Fe-Z-pH2, and they were inert to O₂ but highly active to N₂O. It could be concluded that the competition effect between N₂O and O₂ was very important over different catalysts. O₂ is more prevalent over α-Fe₂O₃ catalyst, while N₂O dominates over Fe-Z-pH2 catalyst. Moreover, in the presence of O₂, Fe-Z-pH2 exhibited better performance for N₂O removal than non-noble mixed oxide catalysts, which might broaden the application of low-temperature SCR of N₂O by CO.

Bulk, Surface and Interface Promotion of Co3O4 for the Low-Temperature N2O Decomposition Catalysis

Nanocrystalline cobalt spinel has been recognized as a very active catalytic material for N2O decomposition. Its catalytic performance can be substantially modified by proper doping with alien cations with precise control of their loading and location (spinel surface, bulk, and spinel-dopant interface). Various doping scenarios for a rational design of the optimal catalyst for low-temperature N2O decomposition are analyzed in detail and the key reactivity descriptors are identified (content and topological localization of dopants, their redox vs. non-redox nature and catalyst work function). The obtained results are discussed in the broader context of the available literature data to establish general guidelines for the rational design of the N2O decomposition catalyst based on a cobalt spinel platform.

Must the Best Laboratory Prepared Catalyst Also Be the Best in an Operational Application?

Three cobalt mixed oxide deN2O catalysts, with optimal content of alkali metals (K, Cs), were prepared on a large scale, shaped into tablets, and tested in a pilot plant reactor connected to the bypassed tail gas from the nitric production plant, downstream from the selective catalytic reduction of NOx by ammonia (SCR NOx/NH3) catalyst. High efficiency in N2O removal (N2O conversion of 75–90% at 450 °C, VHSV = 11,000 m3 mbed−3 h−1) was achieved. However, a different activity order of the commercially prepared catalyst tablets compared to the laboratory prepared catalyst grains was observed. Catalytic experiments in the kinetic regime using laboratory and commercial prepared catalysts and characterization methods (XRD, TPR-H2, physisorption, and chemical analysis) were utilized to explain this phenomenon. Experimentally determined internal effectiveness factors and their general dependency on kinetic constants were evaluated to discuss the relationship between the catalyst activity in the kinetic regime and the internal diffusion limitation in catalyst tablets as well as their morphology. The theoretical N2O conversion as a function of the intrinsic kinetic constants and diffusion rate, expressed as effective diffusion coefficients, was evaluated to estimate the final catalyst performance on a large scale and to answer the question of the above article title.

Efficient catalytic removal of airborne ozone under ambient conditions over manganese oxides immobilized on carbon nanotubes

MnO_x–CNT nanocomposites are efficient towards ozone decomposition owing to the electron transfer from the CNTs to MnO_x that facilitates the activation of ozone.

Effect of Residual Na+ on the Combustion of Methane over Co3O4 Bulk Catalysts Prepared by Precipitation

The effect of the presence of residual sodium (0.4 %wt) over a Co3O4 bulk catalyst for methane combustion was studied. Two samples, with and without residual sodium, were synthesized by precipitation and thoroughly characterised by X-ray diffraction (XRD), N2 physisorption, Wavelength Dispersive X-ray Fluorescence (WDXRF), temperature-programmed reduction with hydrogen followed by temperature-programmed reduction with oxygen (H2-TPR/O2-TPO), temperature-programmed reaction with methane (CH4-TPRe), ultraviolet–visible–near-infrared diffuse reflectance spectroscopy (UV-vis-NIR DRS), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). It was found that during calcination, a fraction of the sodium atoms initially deposited on the surface diffused and migrated into the spinel lattice, inducing a distortion that improved its textural and structural properties. However, surface sodium had an overall negative impact on the catalytic activity. It led to a reduction of surface Co3+ ions in favour of Co2+, thus ultimately decreasing the Co3+/Co2+ molar ratio (from 1.96 to 1.20) and decreasing the amount and mobility of active lattice oxygen species. As a result, the catalyst with residual sodium (T90 = 545 °C) was notably less active than its clean counterpart (T90 = 500 °C). All of this outlined the significance of a proper washing when synthesizing Co3O4 catalyst using a sodium salt as the precipitating agent.

Optimization of N2O decomposition activity of CuO–CeO2 mixed oxides by means of synthesis procedure and alkali (Cs) promotion

The fine-tuning of CuO–CeO₂ mixed oxides by means of synthesis procedure (co-precipitation) and alkali promotion (1.0 at Cs per nm²) towards highly active deN₂O catalysts is demonstrated.

Nanoporous Platinum/(Mn,Al)3O4 Nanosheet Nanocomposites with Synergistically Enhanced Ultrahigh Oxygen Reduction Activity and Excellent Methanol Tolerance

At present, metal/metal oxide composites are considered as potential oxygen reduction reaction (ORR) catalysts for energy-related applications like fuel cells. Here, we fabricated a high-activity, low Pt loading ORR electrocatalyst composed of nanoporous Pt (np-Pt) in intimate contact with lamellar (Mn,Al)₃O₄ nanosheet (NS). In comparison to Pt/C (Johnson Matthey), the np-Pt/(Mn,Al)₃O₄ NS catalyst shows a 11.5-fold enhancement in the mass-normalized ORR activity and much better methanol tolerance because of the metal-support interactions between np-Pt and (Mn,Al)₃O₄. Furthermore, the combination of electrochemical experiments with theoretical calculations verifies that the ORR on the np-Pt/(Mn,Al)₃O₄ NS catalyst is a direct 4e^- pathway in the alkaline solution. In addition, the electrocatalytic mechanisms have also been rationalized by density functional theory (DFT) calculations.