Selective oxidation of ethanol to acetaldehyde over Au–Cu catalysts prepared by a redox method

Enhanced performance of glycerol electro-oxidation in alkaline media using bimetallic Au-Cu NPs supported by MWCNTs and reducible metal oxides

Electrochemical technologies for valorizing glycerol, a byproduct of biodiesel production, into electric energy and value-added chemical products continue to be technologically and economically challenging. In this field, an ongoing challenge is developing more active, stable, and low-cost heterogeneous catalysts for the glycerol electro-oxidation reaction (GlyEOR). This paper reports the influence of the preparation procedure, which involves intermatrix synthesis (Cu and Au NPs), followed by galvanic displacement (Cu-Au NPs) in previously functionalized multi-walled carbon nanotubes (MWCNTs). It also discusses the role of the supports, CeO₂ NPs, and TiO₂ NPs, obtained by a hydrothermal microwave-assisted procedure, on the electroactivity of a hybrid bimetallic Cu-Au/MWCNT/MO₂ catalyst in the GlyEOR in alkaline media. The electrocatalytic behavior was studied and discussed in terms of structure, composition, and electroactivity of the synthesized materials, which were determined by Fourier-transform infrared spectroscopy (FTIR), flame atomic absorption spectroscopy (FAAS), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), X-ray photoelectronic spectroscopy (XPS), and cyclic voltammetry (CV). In addition, the role of the oxidation states of Cu and Au in the as-prepared catalysts (Cu/MWCNT, Au/MWCNT, Cu-Au/MWCNT, Cu-Au/MWCNT-CeO₂, and Cu-Au/MWCNT-TiO₂) was demonstrated. It was concluded that the preparation method of metal NPs for the controlled formation of the most catalytically active oxidation states of Cu and Au, together with the presence of a conductive and oxophilic microenvironment provided by carbon nanotubes and facile reducible oxides in optimized compositions, allows for an increase in the catalytic performance of synthesized catalysts in the GlyEOR.

Research status of volatile organic compound (VOC) removal technology and prospect of new strategies: a review

As an important component of air pollution, the efficient removal of volatile organic compounds (VOCs) is one of the most important challenges in the world. VOCs are harmful to the environment and human health. This review systematically introduced the main VOC control technologies and research hotspots in recent years, and expanded the description of electrocatalytic oxidation technology and bimetallic catalytic removal technology. Based on a three-dimensional electrode reactor, the theoretical design of a VOC removal control technology using bimetallic three-dimensional particle electrode electrocatalytic oxidation was proposed for the first time. The future research focus of this method was analyzed, and the importance of in-depth exploration of the catalytic performance of particle electrodes and the system reaction mechanism was emphasized. This review provides a new idea for using clean and efficient methods to remove VOCs.

Electronic properties and adsorption mechanism of Ru-doped copper clusters towards CH3OH molecule: A DFT investigation

In this study, we have investigated the stability and electronic properties of the Cu_nRu (n = 2-10) nanoclusters and their interaction with the CH₃OH molecule without and with the presence of O₂ molecule by using DFT calculations with TPSS/SDD/6-311g(d,p) level of theory. Based on the second energy difference (Δ²E), the results reveal that the Cu_nRu (n = 4, 6 and 8) clusters are relatively more stable than their neighboring clusters. The values obtained for the Fukui function (f^-) proves that the Ru atom in the Cu_nRu clusters is an excellent adsorption site for the molecules. The interaction of the Cu_nRu clusters with CH₃OH molecule exhibits that the Ru atom is the preferred adsorption site for the CH₃OH molecule, where the O atom of the CH₃OH molecule is strongly chemisorbed onto the Ru site of the clusters, forming a strong bond between the Ru and O atoms. The copper sites of the clusters were found less preferred for the adsorption of CH₃OH, and the complexes formed between both species are less stable than those obtained from the CH₃OH chemisorption over the Ru site of the clusters. The interaction of CH₃OH with the clusters was also evaluated in an oxidizing environment, and the results obtained reveal that the molecule is greatly chemisorbed over the ruthenium site with adsorption energies which vary from - 1.18 to - 2.05 eV. In the presence of the oxygen, the gap energy of the clusters was sharply changed after their interactions with the CH₃OH molecule, suggesting that these clusters can easily detect the above molecule with great sensitivity. Therefore, the presence of the oxygen not only does not prevent the adsorption process, but it considerably promotes the CH₃OH chemisorption onto the ruthenium site of the clusters and therefore significantly rises their sensitivity performance. In conclusion, the Cu_nRu clusters could be employed as effective nanosensors for the CH₃OH molecule detection.

Oxygen-Enhanced Chemical Stability of Lithium-Mediated Electrochemical Ammonia Synthesis

Although oxygen added to nonaqueous lithium-mediated electrochemical ammonia synthesis (LiMEAS) enhances Faradaic efficiency, its effect on chemical stability and byproducts requires understanding. Therefore, standardized high-resolution gas chromatography-mass spectrometry and nuclear magnetic resonance were employed. Different volatile degradation products have been qualitatively analyzed and quantified in tetrahydrofuran electrolyte by adding some oxygen to LiMEAS. Electrodeposited lithium and reduction/oxidation of the solvent on the electrodes produced organic byproducts to different extents, depending on the oxygen concentration, and resulted in less decomposition products after LiMEAS with oxygen. The main organic component in solid-electrolyte interphase was polytetrahydrofuran, which disappeared by adding an excess of oxygen (3 mol %) to LiMEAS. The total number of byproducts detected was 14, 9, and 8 with oxygen concentrations of 0, 0.8, and 3 mol %, respectively. The Faradaic efficiency and chemical stability of the LiMEAS have been greatly improved with addition of optimal 0.8 mol % oxygen at 20 bar total pressure.

Bimetallic M-Cu (M = Ag, Au, Ni) Nanoparticles Supported on γAl2O3-CeO2 Synthesized by a Redox Method Applied in Wet Oxidation of Phenol in Aqueous Solution and Petroleum Refinery Wastewater

Three bimetallic catalysts of the type M-Cu with M = Ag, Au and Ni supports were successfully prepared by a two-step synthesized method using Cu/Al2O3-CeO2 as the base monometallic catalyst. The nanocatalysts were characterized using X-ray diffraction (XRD), temperature-programmed reduction of H2 (H2-TPR), N2 adsorption-desorption, scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM) and ultraviolet-visible spectroscopy with diffuse reflectance (DR-UV-Vis) techniques. This synthesized methodology allowed a close interaction between two metals on the support surface; therefore, it could have synthesized an efficient transition-noble mixture bimetallic nanostructure. Alloy formation through bimetallic nanoparticles (BNPs) of AgCuAlCe and AuCuAlCe was demonstrated by DR-UV-Vis, EDS, TEM and H2-TPR. Furthermore, in the case of AgCuAlCe and AuCuAlCe, improvements were observed in their reducibility, in contrast to NiCuAlCe. The addition of a noble metal over the monometallic copper-based catalyst drastically improved the phenol mineralization. The higher activity and selectivity to CO2 of the bimetallic gold-copper- and silver-copper-supported catalysts can be attributed to the alloy compound formation and the synergetic effect of the M-Cu interaction. Petroleum Refinery Wastewater (PRW) had a complex composition that affected the applied single CWAO treatment, rendering it inefficient.

Effect of ultra-low amount of gold in oxide-supported bimetallic Au–Fe and Au–Cu catalysts on liquid-phase aerobic glycerol oxidation in water

Low-loaded Au–Fe and Au–Cu supported bimetallic catalysts showed exceptional activity in liquid-phase glycerol oxidation. Strong synergetic effect of Au–Fe (Cu) interaction and Au content tuned the oxidation activity and selectivity of the catalysts.

Calcium Carbide Looping System for Acetaldehyde Manufacturing from Virtually any Carbon Source

A vinylation/devinylation looping system for acetaldehyde manufacturing was evaluated. Vinylation of iso-butanol with calcium carbide under solvent-free conditions was combined with hydrolysis of the resulting iso-butyl vinyl ether under slightly acidic conditions. Acetaldehyde produced by hydrolysis was collected from the reaction mixture by simple distillation, and the remaining alcohol was redirected to the vinylation step. All the inorganic co-reagents can be looped as well, and the full sequence is totally sustainable. A complete acetaldehyde manufacturing cycle was proposed on the basis of the developed procedure. The cycle was fed with calcium carbide and produced the aldehyde as a single product in a total preparative yield of 97 %. No solvents, hydrocarbons, or metal catalysts were needed to maintain the cycle. As calcium carbide in principle can be synthesized from virtually any source of carbon, the developed technology represents an excellent example of biomass and waste conversion into a valuable industrial product.

Unusual behavior of bimetallic nanoparticles in catalytic processes of hydrogenation and selective oxidation

Recent results obtained in studying mono- and bimetallic catalysts for selective hydrogenation of unsaturated carbonyl compounds, even unsaturated ones, acetylenic and nitro compounds as well as CO and bio-available alcohols oxidation are reviewed from the standpoint of the strong interaction between the metal nanoparticles, on the one hand, and two metals in the composition of bimetallic nanoparticles, on the other hand. Such interactions were demonstrated to result in partial positive or negative charging of metal nanoparticles, which, in turn, changes their adsorption and catalytic properties, especially with respect to the reactions involving hydrogen. Among the systems studied, Au–Pt, Au–Pd, Au–Cu, Au–Fe, Pt–WO x , Fe–Pd, Fe–Pt, Fe–Cu nanoparticles prepared by the redox procedure are considered to be most perspective in diverse catalytic applications because of the proper combination of the particle size and the electronic state of the metals.

Single and Dual Metal Oxides as Promising Supports for Carbon Monoxide Removal from an Actual Syngas: The Crucial Role of Support on the Selectivity of the Au–Cu System

A catalytic screening was performed to determine the effect of the support on the performance of an Au–Cu based system for the removal of CO from an actual syngas. First, a syngas was obtained from reforming of ethanol. Then, the reformer outlet was connected to a second reactor, where Au–Cu catalysts supported on several single and dual metal oxides (i.e., CeO2, SiO2, ZrO2, Al2O3, La2O3, Fe2O3, CeO2-SiO2, CeO2-ZrO2, and CeO2-Al2O3) were evaluated. AuCu/CeO2 was the most active catalyst due to an elevated oxygen mobility over the surface, promoting CO2 formation from adsorption of C–O* and OH− intermediates on Au0 and CuO species. However, its lower capacity to release the surface oxygen contributes to the generation of stable carbon deposits, which lead to its rapid deactivation. On the other hand, AuCu/CeO2-SiO2 was more stable due to its high surface area and lower formation of formate and carbonate intermediates, mitigating carbon deposits. Therefore, use of dual supports could be a promising strategy to overcome the low stability of AuCu/CeO2. The results of this research are a contribution to integrated production and purification of H2 in a compact system.

Metal/oxide interfacial effects on the selective oxidation of primary alcohols

A main obstacle in the rational development of heterogeneous catalysts is the difficulty in identifying active sites. Here we show metal/oxide interfacial sites are highly active for the oxidation of benzyl alcohol and other industrially important primary alcohols on a range of metals and oxides combinations. Scanning tunnelling microscopy together with density functional theory calculations on FeO/Pt(111) reveals that benzyl alcohol enriches preferentially at the oxygen-terminated FeO/Pt(111) interface and undergoes readily O–H and C–H dissociations with the aid of interfacial oxygen, which is also validated in the model study of Cu₂O/Ag(111). We demonstrate that the interfacial effects are independent of metal or oxide sizes and the way by which the interfaces were constructed. It inspires us to inversely support nano-oxides on micro-metals to make the structure more stable against sintering while the number of active sites is not sacrificed. The catalyst lifetime, by taking the inverse design, is thereby significantly prolonged.

Metals supported on metal oxides are common heterogeneous catalysts. Here the authors show that metal/oxide interfacial sites are highly active for alcohol oxidation—independent of the particle sizes—and use this information to design inverse oxide-on-metal particles with high activity and stability.

Gold nanoparticles supported on mesoporous silica: origin of high activity and role of Au NPs in selective oxidation of cyclohexane

Homogeneous immobilization of gold nanoparticles (Au NPs) on mesoporous silica has been achieved by using a one-pot synthesis method in the presence of organosilane mercapto-propyl-trimethoxysilane (MPTMS). The resultant Au NPs exhibited an excellent catalytic activity in the solvent-free selective oxidation of cyclohexane using molecular oxygen. By establishing the structure-performance relationship, the origin of the high activity of mesoporous supported Au catalyst was identified to be due to the presence of low-coordinated Au (0) sites with high dispersion. Au NPs were confirmed to play a critical role in the catalytic oxidation of cyclohexane by promoting the activation of O₂ molecules and accelerating the formation of surface-active oxygen species.