Photocatalytic C-H Activation and Oxidative Esterification Using Pd@g-C3N4

New insight into highly efficient CSA@g-C3N4 for photocatalytic oxidation of benzyl alcohol and thioanisole: NAEDS as a promoter of photoactivity under blue LED irradiation

An open new perspective has been established toward synthesizing eco-friendly CSA@g-C3N4 employing surface engineering. The carbon nitride modified through camphorsulfonic acid was designed and developed in a category of the new generation of photocatalysts for the oxidation of benzyl alcohol and thioanisole in the existence of a natural deep eutectic solvent (NADES). In comparison with pure g-C3N4, not only does CSA@g-C3N4 exhibit an extraordinarily higher ability for harvesting visible light stemming from declining the recombination rate of electrons/holes dependent on PL results but it also reveals notable photocatalytic oxidation capability in the transformation of alcohols as well as thiols into relevant compounds. In addition, non-metal compound (CSA) incorporation would result in considerably diminishing the energy band gap value from 2.8 to 2.28 eV to escalate the visible-light absorption of g-C3N4. While the conventional consensus implies that inherent properties of photocatalysts bring on high photoactivity, this study indicates that deploying choline chloride-urea deep eutectic solvent as an external factor plays the role of photoactivity accelerator. Furthermore, readily recycling and reusability can be achieved for the photocatalytic setup of CSA@g-C3N4 ascribed to its heterogeneous nature with no drop in the photoactivity.

Photocatalyzed Oxidative Tandem Reaction Mediated by Bipyridinium for Multifunctional Derivatization of Alcohols

The multifunctional derivatization of alcohols has been achieved by the bipyridinium-based conjugated small molecule photocatalysts with redox center and Lewis acid site. Besides exhibiting high activity in the selective generation of aldehydes/ketones, acids from alcohols through solvent modulation, this system renders the first selective synthesis of esters via an attractive cross-coupling pattern, whose reaction route is significantly different from the traditional condensation of alcohols and acids or esterification from hemiacetals. Following the oxidization of alcohol to aldehyde via bipyridinium-mediated electron and energy transfer, the Lewis acid site of bipyridinium then activates the aldehyde and methanol to obtain the acetal, which further reacts with methanol to generate ester. This method not only demonstrates a clear advantage of bipyridinium in diverse catalytic activities, but also paves the way for designing efficient multifunctional small molecule photocatalysts. This metal- and additive-free photocatalytic esterification reaction marks a significant advancement towards a more environmentally friendly, cost-effective and green sustainable approach, attributed to the utilization of renewable substrate alcohol and the abundant, low-cost air as the oxidant. The mildness of this esterification reaction condition provides a more suitable alternative for large-scale industrial production of esters.

CSA@g-C3N4 as a novel, robust and efficient catalyst with excellent performance for the synthesis of 4H-chromenes derivatives

A pioneering robust and green heterogeneous acidic catalyst (CSA@g-C3N4) was rationally designed via immobilization of camphorsulfonic acid (CSA) on the g-C3N4 surface under mild conditions. Grafting CSA in the g-C3N4 lattice is distinguished as the root cause of facilitating the structure change of g-C3N4, leading to a unique morphology, accordingly the remarkable catalytic efficiency of CSA@g-C3N4. The morphology of new as-prepared nano-catalyst was specified by means of FT-IR, XRD, SEM, EDS, TEM, TGA, and BET. For the first time, it is exhibited that the efficient catalyst CSA@g-C3N4 can productively accomplish the three-component reactions with high yields and also serve as an inspiration for easily performing various sorts of MCRs based on our finding. The recommended synthesis pathway of chromenes derivatives is facile and cost-effective which applies a condensation reaction of salicylaldehyde, thiophenol, and malononitrile followed by ready purification in a benign manner. Moreover, the CSA@g-C3N4 nanocomposite can be promptly reused, illustrating no sensational decrease in the catalytic activity after ten times.

Photochemical reactions of a diamidocarbene: cyclopropanation of bromonaphthalene, addition to pyridine, and activation of sp3 C-H bonds

We report unprecedented photochemistry for the diamidocarbene 1. Described within are the double cyclopropanation of 1-bromonaphthalene, the double addition to pyridine, and remarkably, the insertion into the unactivated sp3 C-H bonds of cyclohexane, tetramethylsilane, and n-pentane to give compounds 2-6, respectively. All compounds have been fully characterized, and the solid state structure of 4 was obtained using single crystal electron diffraction.

Tandem Photocatalysis Protocol for Hydrogen Generation/Olefin Hydrogenation Using Pd-g-C3N4-Imine/TiO2 Nanoparticles

An unprecedented visible-light-driven photocatalytic system consisting of Pd nanoparticles stabilized on g-C₃N₄-imine-functionalized TiO₂ nanoparticles was discovered for photoassisted hydrogen generation followed by olefin hydrogenation under mild conditions. The structural integrity of the as-synthesized photocatalyst was corroborated by Fourier transform infrared spectroscopy, X-ray powder diffraction, energy-dispersive X-ray spectroscopy, inductively coupled plasma atomic emission spectroscopy, X-ray photoelectron spectroscopy, ultraviolet-diffuse reflectance spectroscopy, Brunauer-Emmett-Teller measurements, and thermogravimetric analysis (TGA). Transmission electron microscopy and high-resolution scanning electron microscopy revealed the nanoscopic nature of the catalyst. The photocatalyst promoted several different transformations in a one-pot reaction sequence: hydrogen evolution through photocatalytic acceptorless formation of benzimidazoles as important therapeutic agents followed by visible-light-driven photocatalytic reduction of olefins with a high hydrogen utilization efficiency of up to 92% under mild conditions. A significant volume of H₂ was produced under blue light-emitting diode (LED) irradiation during the selective formation of benzimidazole, while the selectivity reduced significantly under a Xe lamp or in the dark. The in situ-generated H₂ could be activated by the as-prepared Pd-C₃N₄-imine/TiO₂ photocatalyst to effectively hydrogenate olefins under mild conditions at appropriate time exposed to blue LED irradiation. The light-dependent photocatalytic performance of the title catalyst was assessed using action spectra by calculating the apparent quantum efficiency (AQE), which exhibited the maximum AQEs at 410 and 550 nm, at which the highest performance for styrene hydrogenation was obtained. The improved photoredox activity of the title nanohybrid could be caused by the synergistic effects of the heterojunction of carbon nitride-Pd on TiO₂ nanoparticles evidenced by photoluminescence spectra and catalytic reactions. The catalyst proved to be air-stable, robust, recyclable, and very active in the absence of any undesirable additives and reducing agents. Thus, this work presents a new protocol for improving the photocatalytic properties of semiconducting materials for various photocatalytic applications under environmentally friendly conditions.

Graphitic Carbon Nitride-Based Materials as Catalysts for the Upgrading of Lignocellulosic Biomass-Derived Molecules

The use of graphitic carbon nitride (g-C₃N₄)-based catalysts in the upgrading of lignocellulosic biomass significantly contributes to the greener production of biofuels, polymer precursors, and building blocks. In recent years, several catalysts based on g-C₃N₄ have been developed and applied in both photocatalyzed and non-photocatalyzed (thermal) reactions. This Review provides an overview on the upgrading of lignocellulosic biomass deploying several compositions of g-C₃N₄-based catalysts.

Noble Metal Nanoparticles Incorporated Siliceous TUD-1 Mesoporous Nano-Catalyst for Low-Temperature Oxidation of Carbon Monoxide

This report, for the first time, demonstrated the low-temperature oxidation of carbon monoxide (CO) using nano-catalysts consisting of noble metal nanoparticles incorporated in TUD-1 mesoporous silica nano-structures synthesized via a one-pot surfactant-free sol–gel synthesis methodology. Herein, we investigated a nano-catalyst, represented as M-TUD-1 (M = Rh, Pd, Pt and Au), which was prepared using a constant Si/M ratio of 100. The outcome of the analytical studies confirmed the formation of a nano-catalyst ranging from 5 to 10 nm wherein noble metal nanoparticles were distributed uniformly onto the mesopores of TUD-1. The catalytic performance of M-TUD-1 catalysts was examined in the environmentally impacted CO oxidation reaction to CO₂. The catalytic performance of Au-TUD-1 benchmarked other M-TUD-1 catalysts and a total conversion of CO was obtained at 303 K. The activity of the other nano-catalysts was obtained as Pt-TUD-1 > Pd-TUD-1 > Rh-TUD-1, with a total CO conversion at temperatures of 308, 328 and 348 K, respectively. The Au-TUD-1 exhibited a high stability and reusability as indicated by the observed high activity after ten continuous runs without any treatment. The outcomes of this research suggested that M-TUD-1 are promising nano-catalysts for the removal of the toxic CO gas and can also potentially be useful to protect the environment where a long-life time, cost-effectiveness and industrial scaling-up are the key approaches.

σ-H-H, σ-C-H, and σ-Si-H Bond Activation Catalyzed by Metal Nanoparticles

Activation of H-H, Si-H, and C-H bonds through σ-bond coordination has grown in the past 30 years from a scientific curiosity to an important tool in the functionalization of hydrocarbons. Several mechanisms were discovered via which the initially σ-bonded substrate could be converted: oxidative addition, heterolytic cleavage, σ-bond metathesis, electrophilic attack, etc. The use of metal nanoparticles (NPs) in this area is a more recent development, but obviously nanoparticles offer a much richer basis than classical homogeneous and heterogeneous catalysts for tuning reactivity for such a demanding process as C-H functionalization. Here, we will review the surface chemistry of nanoparticles and catalytic reactions occurring in the liquid phase, catalyzed by either colloidal or supported metal NPs. We consider nanoparticles prepared in solution, which are stabilized and tuned by polymers, ligands, and supports. The question we have addressed concerns the differences and similarities between molecular complexes and metal NPs in their reactivity toward σ-bond activation and functionalization.

Polymeric graphitic carbon nitride (g-C3N4)-based semiconducting nanostructured materials: Synthesis methods, properties and photocatalytic applications

In recent years, various facile and low-cost methods have been developed for the synthesis of advanced nanostructured photocatalytic materials. These catalysts are required to mitigate the energy crisis, environmental deterioration, including water and air pollution. Among the various semiconductors explored, recently novel classes of polymeric graphitic carbon nitride (g-C₃N₄)-based heterogeneous photocatalysts have established much greater importance because of their unique physiochemical properties, large surface area, low price, and long service life, ease of synthesis, product scalability, controllable band gap properties, low toxicity, and high photocatalytic activity. The present comprehensive review focuses on recent achievements in a number of facile chemical synthesis methods for semiconducting polymeric carbon nitrides and their heterogeneous nanohybrids with various dopants, nanostructured metals, metal oxides, and nanocarbons, as well as the parameters influencing their physiochemical properties and photocatalytic efficiency, which are discussed with reference to various catalytic applications such as air (NO_x) purification, wastewater treatment, hydrogen generation, CO₂ reduction, and chemical transformation. The mechanisms for the superior photocatalytic activity of polymeric g-C₃N₄-based heterogeneous photocatalysts are also discussed. Finally, the challenges, prospects, and future directions for photocatalytic polymeric g-C₃N₄-based semiconducting materials are described.

Photo-Fenton like Catalyst System: Activated Carbon/CoFe2O4 Nanocomposite for Reactive Dye Removal from Textile Wastewater

The removal of dye from textile industry wastewater using a photo-Fenton like catalyst system was investigated wherein the removal efficiency of phenol and chemical oxygen demand (COD) was studied by varying various parameters of pH (3–11), reaction time (1–50 min), activated Carbon/CoFe2O4 (AC/CFO) nanocomposite dosage (0.1–0.9 g/L), and persulfate amount (1–9 mM/L). The highest removal rates of reactive red 198 and COD were found to be 100% and 98%, respectively, for real wastewater under the optimal conditions of pH = 6.5, AC/CFO nanocomposite dosage (0.3 g/L), reaction time, 25 min, and persulfate dose of 5 mM/L up on constant UV light irradiation (30 W) at ambient room temperature. The result showed that this system is a viable and highly efficient remediation protocol relative to other advanced oxidation processes; inexpensive nature, the ease of operation, use of earth-abundant materials, and reusability for removal of organic pollutants being the salient attributes.

Carbon nitrides and metal nanoparticles: from controlled synthesis to design principles for improved photocatalysis

The use of sunlight to drive chemical reactions via photocatalysis is of paramount importance towards a sustainable future. Among several photocatalysts, earth-abundant polymeric carbon nitride (PCN, often wrongly named g-C3N4) has emerged as an attractive candidate due to its ability to absorb light efficiently in the visible and near-infrared ranges, chemical stability, non-toxicity, straightforward synthesis, and versatility as a platform for constructing hybrid materials. Especially, hybrids with metal nanoparticles offer the unique possibility of combining the catalytic, electronic, and optical properties of metal nanoparticles with PCN. Here, we provide a comprehensive overview of PCN materials and their hybrids, emphasizing heterostructures with metal nanoparticles. We focus on recent advances encompassing synthetic strategies, design principles, photocatalytic applications, and charge-transfer mechanisms. We also discuss how the localized surface plasmon resonance (LSPR) effect of some noble metals NPs (e.g. Au, Ag, and Cu), bimetallic compositions, and even non-noble metals NPs (e.g., Bi) synergistically contribute with PCN in light-driven transformations. Finally, we provide a perspective on the field, in which the understanding of the enhancement mechanisms combined with truly controlled synthesis can act as a powerful tool to the establishment of the design principles needed to take the field of photocatalysis with PCN to a new level, where the desired properties and performances can be planned in advance, and the target material synthesized accordingly.

Nitrogen-enriched porous carbon supported Pd-nanoparticles as an efficient catalyst for the transfer hydrogenation of alkenes

Well-dispersed Pd nanoparticles supported on nitrogen-enriched porous carbon were prepared and this material displayed excellent catalytic activity for the transfer hydrogenation of alkenes. The Pd@NPC catalyst exhibited high catalytic activity and stability for the hydrogenation of alkenes.