Influence of the supporting electrolyte on the removal of ionic liquids by electrolysis with diamond anodes

Interface Nanoarchitectonics of TiO2/g-C3N4 2D/2D Heterostructures for Enhanced Antibiotic Degradation and Cr(VI) Reduction

Mixed-phase TiO₂ nanosheets were loaded on superior thin g-C₃N₄ nanosheets by a one-step solvothermal synthesis to form unique two-dimensional (2D)/2D heterostructures, which increased the interface area between TiO₂ and g-C₃N₄, resulting in the easy migration of photogenerated carriers between two components. The rate of photocatalytic reactions increased significantly. Ciprofloxacin, tetracycline hydrochloride, and oxytetracycline hydrochloride were selected as target substances to test the photocatalytic degradation properties of the sample. The photoreduction performance of Cr(VI) was also tested. The results indicate that the photocatalytic degradation rate of antibiotics using TiO₂/g-C₃N₄ heterostructures under visible light irradiation was twice that of g-C₃N₄. It took only 30 min to remove Cr(VI) (20 mg/L) under full solar spectrum irradiation; the photoreduction rate of Cr(VI) is also nearly twice that of pure TiO₂. The improved performance was attributed to the rich active sites brought by mixed-phase TiO₂ nanosheets. The extensive interface made the rapid migration of photogenerated carriers possible. The heterostructures revealed a band gap of 2.81 eV, which is less than that of TiO₂ (3.2 eV), resulting in the increased absorption of visible light. Meanwhile, the mixed phase of TiO₂ was beneficial for the separation of photogenerated carriers.

Solar-driven zinc-doped graphitic carbon nitride photocatalytic fibre for simultaneous removal of hexavalent chromium and pharmaceuticals

The current environmental problems urgently require researchers to seek an environmentally friendly, effective and easy to operate sewage treatment method. Graphite carbon nitride (g-C₃N₄), which has the advantages of simple preparation, safety, non-toxicity and chemical resistance, was expected to become a photocatalyst for solving environmental pollution. However, the performances of g-C₃N₄ still have some limitations that the electron hole recombination is fast and the powder is not easy to recover. In this study, zinc-doped graphite carbon nitride photocatalyst (Zn-g-C₃N₄) was mixed with polyacrylonitrile (PAN) to produce photocatalyst fibres by electrospinning. It not only solves the problem that the powder catalyst is difficult to recycle, but also effectively inhibits the recombination of photoelectron-hole pairs. Zn-g-C₃N₄/PAN has good photocatalytic activity for the simultaneous reduction of hexavalent chromium and degradation of pharmaceuticals. When organic pollutants are present, the reduction efficiency of hexavalent chromium was improved without affecting its own removal efficiency. The potential application value of Zn-g-C₃N₄/PAN catalytic fibre was further explored by simulating the complex actual water environment. The composite fibre can be easily reused and keep its superior photocatalytic performance. The mechanism of pharmaceuticals degradation was proposed, in which ∙O2- is the most important active species, which leads to the oxidation of pharmaceuticals. Besides, the photoelectrons generated by the catalyst can reduce the toxic hexavalent chromium. The efficiency of Zn-g-C₃N₄ to remove pollutants is improved by PAN fibre as a carrier, which not only solves the problem of difficult recovery of powder catalysts, but also provides more active sites.

The integrated production of ultrathing-C3N4and membrane assisted by edible syrup for the sustained photocatalytic treatment of Cr(VI) and tetracycline

The exfoliation of bulk raw graphitic carbon nitride (g-C₃N₄) by edible glucose syrup to produce ultrathing-C₃N₄nanosheets in concentrations of up to 0.2 mg ml^-1was achieved. Detailed characterization through TEM, AFM, FT-IR, XRD, Raman and TGA confirmed the formation of ultrathin structure and improved properties. Compared to rawg-C₃N₄, the prepared thing-C₃N₄layers exhibited a 18-fold enhancement in Cr(VI) reduction and a 3-fold enhancement in tetracycline hydrochloride degradation, which is ascribed to their larger specific surface area and more exposed active sites. The layeredg-C₃N₄membrane was constructed via direct vacuum filtration. The layer-stackedg-C₃N₄nanosheet membrane exhibited an excellent and sustained photocatalytic performance as the prepared thing-C₃N₄layers could maintain a layered lamella after stacking in filtration process. The recyclable synthesis of ultrathing-C₃N₄layers and layer-stackedg-C₃N₄membrane by our method provides a sustainable strategy to pollution treatment by 2D materials.

Understanding the adsorption of ionic liquids onto zeolite ZSM-5 from aqueous solution: experimental and computational modelling

Ionic liquids are considered as emergent pollutants as these compounds possess high persistence in aqueous solution and toxicity toward aquatic organisms. In this work, the adsorption equilibrium of 27 ionic liquids, with different cation head groups, alkyl chain lengths, and anions, onto ZSM-5 was measured experimentally at several compositions and at temperature 298.15 K and 0.1 MPa. The extensive number of ionic liquids studied allows a comprehensive study on the impact of adsorbate chemical structures toward their adsorption process. The gathered experimental results show that the anions have a dominant effect, when compared to the cation head group and the alkyl chain length, in ruling the adsorption of ionic liquids from aqueous solution onto ZSM-5. The adsorption isotherms reveal that the adsorption process is a combination between Langmuir and Freundlich behaviors, with the latter leading the general process. Moreover, computational modelling using COSMO-RS demonstrates the existence of several molecular forces that rule the adsorption process, reinforcing the idea that the ionic liquid anion rules the adsorption. The results collected in the present work provide new understanding on the molecular mechanism for the development of efficient adsorbents for removal and recovery of ionic liquids from aqueous solution.

Influence of hydrodynamic conditions on the degradation of 1-butyl-3-methylimidazolium chloride solutions on boron-doped diamond anodes

This study assessed the influence of hydrodynamic conditions on the degradation process of 1-butyl-3-methylimidazolium chloride (BMImCl) solution on a boron-doped diamond anode in a filter-type electrochemical reactor configuration. The results show that this parameter did not significantly affect this process when operating in the laminar regime. However, in the transition regime (Re ≥ 2000), higher flow rates resulted in a faster removal of BMImCl and total organic carbon, making the process more efficient. Following BMImCl degradation, nitrates were generated at the cathode, then reduced at the cathode to ammonium; combination with free chloride produced at the anode led to the transformation of chloride into combined chlorine forms instead of more toxic oxianions such as chlorate and perchlorate. Thus, the flow rate can be a key parameter for defining operating conditions in which the target BMImCl is more effectively degraded with reduced generation of undesirable secondary products.

Removal of imidazolium-based ionic liquid by coupling Fenton and biological oxidation

In this work, we assessed the potential of combining Fenton´s reagent and biological oxidation for removing the imidazolium-based ionic liquid 1-Ethyl-3-methylimidazolium chloride (EmimCl). Fenton-like oxidation was conducted at variable H₂O₂ doses from 20 to 100% the stoichiometric value as calculated from the theoretical chemical oxygen demand (COD). The stoichiometric H₂O₂ dose afforded Total Organic Carbon (TOC) conversion and COD removal of 50 and 62%, respectively. Identifying the reaction by-products formed at low hydrogen peroxide doses allowed a plausible pathway for EmimCl oxidation to be proposed. The effluents from Fenton-like oxidation at substoichiometric H₂O₂ doses were less ecotoxic and more biodegradable than was the parent ionic liquid. The effluent from Fenton-like oxidation with the 60% H₂O₂ dose (TOC conversion ≅ 41%, COD removal ≅ 31%) was subsequently subjected to an effective biological treatment that allowed complete removal of the starting compound, increased its ecotoxicity to a low-moderate level and rendered it acceptably biodegradable. Biological oxidation was performed in 8-h and 12-h cycles in a sequencing batch reactor. Combining Fenton and biological oxidation of EmimCl afforded TOC conversion and COD removal of around 90%.