Behaviour of Pt/TiO2 catalysts with different morphological and structural characteristics in the photocatalytic conversion of ethanol aqueous solutions

Photocatalytic Reforming of Ethanol in the Liquid Phase Using a Ternary Composite of Rh/TiO2/g-C3N4 as a Catalyst

Photocatalytic reforming of ethanol provides an effective way to produce hydrogen energy using natural and nontoxic ethanol as raw material. Developing highly efficient catalysts is central to this field. Although traditional semiconductor/metal heterostructures (e.g., Rh/TiO2) can result in relatively high catalyst performance by promoting the separation of photoinduced hot carriers, it will still be highly promising to further improve the catalytic performance via a cost-effective and convenient method. In this study, we developed a highly efficient photocatalyst for ethanol reformation by preparing a ternary composite structure of Rh/TiO2/g-C3N4. Hydrogen is the main product, and the reaction rate could reach up to 27.5 mmol g-1 h-1, which is ∼1.41-fold higher than that of Rh/TiO2. The catalytic performance here is highly dependent on the wavelength of the light illumination. Moreover, the photocatalytic reforming of ethanol and production of hydrogen were also dependent on the Rh loading and g-C3N4:TiO2 ratio in Rh/TiO2/g-C3N4 composites as well as the ethanol content in the reaction system. The mechanism of the enhanced hydrogen production in Rh/TiO2/g-C3N4 is determined as the improvement in the separation of photoinduced hot carriers. This work provides an effective photocatalyst for ethanol reforming, largely expanding its application in the field of renewable energy and interface science.

MoxC Heterostructures as Efficient Cocatalysts in Robust MoxC/g-C3N4 Nanocomposites for Photocatalytic H2 Production from Ethanol

In this work, we studied new materials free of noble metals that are active in photocatalytic H2 generation from ethanol aqueous solutions (EtOHaq), which can be obtained from biomass. MoxC/g-C3N4 photocatalysts containing hexagonal (hcp) Mo2C and/or cubic (fcc) MoC nanoparticles on g-C3N4 nanosheets were prepared, characterized, and evaluated for photocatalytic hydrogen production from EtOHaq (25% v/v). Tailored MoxC/g-C3N4 nanocomposites with MoxC crystallite sizes in the 4-37 nm range were prepared by treatment with ultrasound of dispersions containing MoxC and g-C3N4 nanosheets, formerly synthesized. The characterization of the resulting nanocomposites, MoxC/g-C3N4, by different techniques, including photoelectrochemical measurements, allowed us to relate the photocatalytic performance of materials with the characteristics of the MoxC phase integrated onto g-C3N4. The samples containing smaller hcp Mo2C crystallites showed better photocatalytic performance. The most performant nanocomposite contained nanoparticles of both hcp Mo2C and fcc MoC and produced 27.9 mmol H2 g-1 Mo; this sample showed the lowest recombination of photogenerated charges, the highest photocurrent response, and the lowest electron transfer resistance, which can be related to the presence of MoC-Mo2C heterojunctions. Moreover, this material allows for easy reusability. This work provides new insights for future research on noble-metal-free g-C3N4-based photocatalysts.

Enhancing electronic metal support interaction (EMSI) over Pt/TiO2 for efficient catalytic wet air oxidation of phenol in wastewater

Phenol is one of the major hazardous organic compounds in industrial wastewater. In this work, a highly active Pt/TiO₂ catalyst for catalytic wet air oxidation (CWAO) of phenol was obtained by supporting pre-synthesized Pt on TiO₂. During the followed hydrogen reduction, strong hydrogen spillover occurred without the migration of TiO₂ onto Pt. The reduced support then enhanced the electron transfer from TiO₂ to Pt, increasing the percentage of partially negative Pt (Pt^δ-), which has been confirmed by XPS. The strong EMSI made the obtained catalyst far more active than Pt/TiO₂ prepared by impregnation method. The electron-enriched Pt/TiO₂ achieved total organic carbon (TOC) conversion of 88.8% and TOF 149 h^-1 at 100 °C and 2 MPa O₂, while conventional Pt/TiO₂ gave TOC conversion of 39.5% and TOF 41 h^-1 for CWAO of phenol. Our work indicates that the enhancement of EMSI between metal and support can be an effective approach to develop highly active catalysts for phenol treatment.

Single Atomic Pt on SrTiO3 Catalyst in Reverse Water Gas Shift Reactions

Copper catalysts were widely developed for CO2 conversion, but suffered severe sintering at temperatures higher than 300 °C. Platinum was the most active and stable metal for RWGS reactions. However, the high price and scarcity of platinum restrained its application. Downsizing the metal particles can significantly improve the atom efficiency of the precious metal but the size effect of Pt on RWGS reactions was still unclear. In the present work, the single atomic Pt on SrTiO3 was prepared using an impregnation leaching method, and the catalyst showed significant activity for an RWGS reaction, achieving a CO2 conversion rate of 45%, a CO selectivity of 100% and a TOF of 0.643 s−1 at 500 °C. The structures of the catalysts were characterized using XRD, STEM and EXAFS. Especially, the size effect of Pt in RWGS was researched using in situ FTIR and DFT calculations. The results reveal that single Pt atoms are the most active species in RWGS via a “–COOH route” while larger Pt cluster and nanoparticles facilitate the further hydrogenation of CO. The reaction between formate and H* is the rate determination step of an RWGS reaction on a catalyst, in which the reaction barrier can be lowered from 1.54 eV on Pt clusters to 1.29 eV on a single atomic Pt.

TiO2 Photocatalysis for the Transformation of Aromatic Water Pollutants into Fuels

The growing world energy consumption, with reliance on conventional energy sources and the associated environmental pollution, are considered the most serious threats faced by mankind. Heterogeneous photocatalysis has become one of the most frequently investigated technologies, due to its dual functionality, i.e., environmental remediation and converting solar energy into chemical energy, especially molecular hydrogen. H2 burns cleanly and has the highest gravimetric gross calorific value among all fuels. However, the use of a suitable electron donor, in what so-called “photocatalytic reforming”, is required to achieve acceptable efficiency. This oxidation half-reaction can be exploited to oxidize the dissolved organic pollutants, thus, simultaneously improving the water quality. Such pollutants would replace other potentially costly electron donors, achieving the dual-functionality purpose. Since the aromatic compounds are widely spread in the environment, they are considered attractive targets to apply this technology. In this review, different aspects are highlighted, including the employing of different polymorphs of pristine titanium dioxide as photocatalysts in the photocatalytic processes, also improving the photocatalytic activity of TiO2 by loading different types of metal co-catalysts, especially platinum nanoparticles, and comparing the effect of various loading methods of such metal co-catalysts. Finally, the photocatalytic reforming of aromatic compounds employing TiO2-based semiconductors is presented.

Photocatalytic Reforming for Hydrogen Evolution: A Review

Hydrogen is considered to be an ideal energy carrier to achieve low-carbon economy and sustainable energy supply. Production of hydrogen by catalytic reforming of organic compounds is one of the most important commercial processes. With the rapid development of photocatalysis in recent years, the applications of photocatalysis have been extended to the area of reforming hydrogen evolution. This research area has attracted extensive attention and exhibited potential for wide application in practice. Photocatalytic reforming for hydrogen evolution is a sustainable process to convert the solar energy stored in hydrogen into chemical energy. This review comprehensively summarized the reported works in relevant areas, categorized by the reforming precursor (organic compound) such as methanol, ethanol and biomass. Mechanisms and characteristics for each category were deeply discussed. In addition, recommendations for future work were suggested.