Metal-free carbon materials as catalysts for wet air oxidation

Zn/Al layered double hydroxide and carboxymethyl cellulose composite beads as support for the catalytic gold nanoparticles and their applications in the reduction of nitroarenes

Until now, many efficient catalysts have been reported that are used for the reduction of nitroarenes. However, a catalyst reusability is a challenge that is often faced in practical environment. In this report, we designed a hydrogel composite (CMC-LDH), which act as support and making it possible to address this challenge. In this research work, zinc/aluminum based layered double hydroxides (Zn/Al LDH) have been assembled with carboxymethyl cellulose (CMC) to prepare CMC/LDH hydrogel beads. The CMC/LDH hydrogel beads were prepared by the ionotropic gelation method. For CMC/LDH/Au preparation, the already prepared CMC/LDH beads were kept in gold ion (Au3+) solution, and their subsequent reduction with sodium borohydride (NaBH4). For the characterization of the prepared samples different instrumental techniques, such as Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy, and scanning electron microscopy (SEM) were adopted. For the catalytic evaluation of CMC/LDH/Au, it was utilized as a catalyst in 4-NP and 4-NA reduction reactions. The continuity of the reaction was monitored by a UV-visible spectrophotometer. Rate constant (kapp) of 0.48474 min-1 and 0.7486 min-1 were obtained for 4-NP and 4-NA reduction, respectively. The hydrogel beads were recycled and reused for up to five successive cycles without significantly changing their catalytic efficiency.

Mechanism of nitrogen-doped biochar activated peroxymonosulfate for degradation of 2,4-dichlorophenol

Biochar activated peroxymonosulfate has been widely used to degrade organic pollutants. However, the chemical inertness of the sp2 hybrid conjugated carbon framework and the limited number of active sites on the pristine biochar resulted in the low catalytic activity of the system, restricting its further application. In this study, nitrogen-doped biochar was prepared following a simple one-step synthesis method taking advantage of the similar atomic radius and significant difference in electronegativity of N and C atoms to explore the properties and mechanisms of biochar-mediated peroxymonosulfate activation to degrade 2,4-dichlorophenol. Results from degradation experiments revealed that the catalytic efficiency of the prepared nitrogen-doped biochar was approximately 37.8 times higher than that of the undoped biochar. Quenching experiments combined with Electron paramagnetic resonance (EPR) analysis illustrated that the generated singlet oxygen (¹O₂) and superoxide anion radical (O₂^•-) were the main reactive oxidative species that dominated the target organics removal processes. This work will provide a theoretical basis for expanding the practical application of nitrogen-doped biochar to remediate water pollution via peroxymonosulfate activation.

Ru Catalysts Supported on Bamboo-like N-Doped Carbon Nanotubes: Activity and Stability in Oxidizing and Reducing Environment

The catalysts with platinum-group metals on nanostructured carbons have been a very active field of research, but the studies were mainly limited to Pt and Pd. Here, Ru catalysts based on nitrogen-doped carbon nanotubes (N-CNTs) have been prepared and thoroughly characterized; Ru loading was kept constant (3 wt.%), while the degree of N-doping was varied (from 0 to 4.8 at.%) to evaluate its influence on the state of supported metal. Using the N-CNTs afforded ultrafine Ru particles (<2 nm) and allowed a portion of Ru to be stabilized in an atomic state. The presence of Ru single atoms in Ru/N-CNTs expectedly increased catalytic activity and selectivity in the formic acid decomposition (FAD) but had no effect in catalytic wet air oxidation (CWAO) of phenol, thus arguing against a key role of single-atom catalysis in the latter case. A remarkable difference between these two reactions was also found in regard to catalyst stability. In the course of FAD, no changes in the support or supported species or reaction rate were observed even at a high temperature (150 °C). In CWAO, although 100% conversions were still achievable in repeated runs, the oxidizing environment caused partial destruction of N-CNTs and progressive deactivation of the Ru surface by carbonaceous deposits. These findings add important new knowledge about the properties and applicability of Ru@C nanosystems.

Bifunctional Ni@NiO catalyst supported on loofah sponge-derived carbon for electrocatalytic air oxidation of biorefractory pollutant in a coupling system

Oxygen (O₂) in the air is a green oxidant, and utilization of air for pollutant removal is highly desired. Herein, we report the preparation and utilization of a novel biomass-based three-dimensional (3D) Ni@NiO/carbon composite for the electro-activation of O₂ under room condition. The carbon-coated Ni@NiO nanoparticles are fabricated on a hierarchical 3D porous loofah sponge-derived carbon (LSC) support as the bifunctional catalyst for the activation of O₂ via both the electro-oxidation and electro-reduction reactions. An electrocatalytic air oxidation coupling system is constructed with the Ni@NiO/LSC shell-core electrodes for pollutant degradation. A variety of organic pollutants, including pharmaceutics and personal care products (PPCPs), dyes, phenolic compounds, and real waters are mineralized by more than 60% with significantly enhanced biodegradability. Notably, the coupling system obtains high mineralization efficiency of 70.2 ± 1.9% on landfill leachate with significant biodegradability enhancement. The specific energy consumptions of the coupling system are only 6.8 ± 0.7 to 60.2 ± 3.6 kWh kg-TOC^-1 in mineralizing different pollutants. The hollow structure of the LSC fibers endows the loaded Ni@NiO with superior intrinsic catalytic activity, which is associated with low reaction resistance and facile electron transfer. The Ni@NiO on LSC presents an electrocatalytic wet air oxidation (ECWAO) catalytic activity higher by 35.8% and cathodic air oxidation (CAO) catalytic activity higher by 22.7% as compared to that loaded on commercial graphite felt.

MOF-derived MnO@C with high activity for electric field-assisted catalytic oxidation of aqueous pollutants

The activation of oxygen (O₂) under room condition is important for the utilization of air to perform oxidation. Here, we report a porous carbon-encapsulated MnO (MnO@C) derived from Mn metal-organic framework (MOF)grown in-situ on a graphite felt (GF) support. The MnO@C exhibits superior catalytic activity in an electric field-assisted catalytic oxidation system for the degradation of organic pollutants under room condition. The catalytic oxidation reaction applies a surface reaction pathway in which the surface-bound chemisorbed oxygen species are electro-oxidized and then involved in the oxidation of co-adsorbed organic pollutants. The abundant oxygen vacancies and oxygenated functional groups in MnO@C provide active sites for the chemisorption of O₂, and its conductive mesoporous structure allows facile electrons and mass transfer. As a result, the MnO@C/GF catalyst displays quite high turnover frequency (TOF) value as 0.038 mg-TOC mg-MnO^-1 min^-1, which is 6.66 times higher than that of the MnO/GF catalyst prepared by impregnation method as a comparison. With the aid of + 1.0 V of positive electric field, the catalytic oxidation system exhibits extensive effectiveness in mineralizing a variety of dyes, pharmaceuticals, personal care products, and phenolic compounds under room condition with significantly enhanced biodegradability.

Carbon-Based Materials for Oxidative Desulfurization and Denitrogenation of Fuels: A Review

Sulfur (S) and nitrogen (N) are elements naturally found in petroleum-based fuels. S- and N-based compounds in liquid fuels are associated with a series of health and environmental issues. Thus, legislation has become stricter worldwide regarding their content and related emissions. Traditional treatment systems (namely hydrodesulfurization and hydrodenitrogenation) fail to achieve the desired levels of S and N contents in fuels without compromising combustion parameters. Thus, oxidative treatments (oxidative desulfurization–ODS, and oxidative denitrogenation-ODN) are emerging as alternatives to producing ultra-low-sulfur and nitrogen fuels. This paper presents a thorough review of ODS and ODN processes applying carbon-based materials, either in hybrid forms or as catalysts on their own. Focus is brought to the role of the carbonaceous structure in oxidative treatments. Furthermore, a special section related to the use of amphiphilic carbon-based catalysts, which have some advantages related to a closer interaction with the oily and aqueous phases, is discussed.

Heteroatom (N, S) Co-Doped CNTs in the Phenol Oxidation by Catalytic Wet Air Oxidation

The N, S-co-doping of commercial carbon nanotubes (CNTs) was performed by a solvent-free mechanothermal approach using thiourea. CNTs were mixed with the N, S-dual precursor in a ball-milling apparatus, and further thermally treated under inert atmosphere between 600 and 1000 °C. The influence of the temperature applied during the thermal procedure was investigated. Textural properties of the materials were not significantly affected either by the mechanical step or by the heating phase. Concerning surface chemistry, the developed methodology allowed the incorporation of N (up to 1.43%) and S (up to 1.3%), distributed by pyridinic (N6), pyrrolic (N5), and quaternary N (NQ) groups, and C–S–, C–S–O, and sulphate functionalities. Catalytic activities of the N, S-doped CNTs were evaluated for the catalytic wet air oxidation (CWAO) of phenol in a batch mode. Although the samples revealed a similar catalytic activity for phenol degradation, a higher total organic carbon removal (60%) was observed using the sample thermally treated at 900 °C. The improved catalytic activity of this sample was attributed to the presence of N6, NQ, and thiophenic groups. This sample was further tested in the oxidation of phenol under a continuous mode, at around 30% of conversion being achieved in the steady-state.

Tunable acidity in mesoporous carbons for hydrolysis reactions

The acidity of a mesoporous carbon has been enhanced and strengthened thanks to the formation of new oxygenated functionalities.