Catalytic production of anilines by nitro-compounds hydrogenation over highly recyclable platinum nanoparticles supported on halloysite nanotubes

Cataluminescence Sensor Based on Halloysite Nanotubes/MgO Nanocomposite for Rapid Detection of Ether

MgO surface makes it easy to introduce a certain amount of oxygen vacancy and can enhance catalytic reaction activity. Besides, as a silicoaluminate mineral material, halloysite nanotube (HNT) has a unique tubular structure. In this paper, the HNTs@MgO composite was successfully synthesized based on natural clay material HNTs as a carrier, and the CTL sensor based on HNTs@MgO was successfully developed for the rapid determination of ether in air. The HNTs@MgO material was characterized by a series of means such as SEM, XPS, and XRD, which clearly confirmed that MgO successfully combined with HNTs. And the sensor showed good sensitivity and selectivity, with a good linear relationship between CTL intensity and ether concentration in the range of 0.5-190.0 mg/L (R2 = 0.9942), and the limit of detection (LOD) was 0.18 mg/L (S/N = 3). The RSD values of the results of 11 consecutive measurements by the same sensor and 7 days of consecutive measurements were 1.96% (n = 11) and 3.42% (n = 7), showing good repeatability and reproducibility. At last, the CTL sensor was used to detect air samples, the recoveries ranged from 91.6% to 109.6%. Thus, it was concluded that HNTs@MgO composite is a cost-effective and promising material with potential application in atmospheric detection.

Palladium nanoparticles anchored on NiO particles-modified micro-size chitosan spheres: A promising, active, and retrievable catalyst system for treatment of environmental pollutants

Efficient treatment of toxic organic pollutants in water/wastewater by using innovative, cost efficient, and simple technologies has recently become an important issue worldwide. Remediation of these pollutants with chemical reduction in the presence of a nano-sized catalyst and a reducing agent is one of the most useful methodologies. In the present study, we have designed a promising heterogeneous catalyst system (Pd@CS-NiO) by easy and efficient stabilization of palladium nanoparticles on the surface of microspheres composed of chitosan (CS)-NiO particles (CS-NiO) for the reduction of organic pollutants. The nano-structure of the developed Pd@CS-NiO was successfully validated using FE-SEM, XRD, EDS, TEM, and FTIR/ATR and its particles size was determined as 10 nm. The catalytic power of Pd@CS-NiO was then assessed in the reduction of 4-nitro-o-phenylenediamine (4-NPDA), 4-nitrophenol (4-NP), 4-nitroaniline (4-NA), 2-nitroaniline (2-NA), and some organic dyes, namely methylene blue (MB), methyl orange (MO), and rhodamine B (RhB) in aqueous medium at room temperature. The reductions were thoroughly studied spectro-photometrically. The tests displayed that the synthesized Pd@CS-NiO was a highly active and useful catalyst that reduced these pollutants in 0-145 s. Moreover, the rate constants for 2-NA, 4-NP, 4-NA, 4-NPDA, MO, and RhB were found to be 0.017 s-1, 0.011 s-1, 0.006 s-1, 0.013 s-1, 0.023 s-1, and 0.03 s-1, respectively. Moreover, the recycling test indicated that Pd@CS-NiO may be recovered easily thanks to its micro size nature and could be used up to seven steps, confirming its practical application potential.

Gold nanoparticle-decorated earth-abundant clay nanotubes as catalyst for the degradation of phenothiazine dyes and reduction of 4-(4-nitrophenyl)morpholine

In the present work, halloysite nanotubes modified with gold nanoparticles (AuNPs-HNT) are successfully prepared by wet chemical method for the catalytic degradation of phenothiazine dyes (azure B (AZB) and toluidine blue O (TBO)) and also cleaner reduction of 4-(4-nitrophenyl)morpholine (4NM) in the sodium borohydride (NaBH4) media. The catalyst is formulated by modifying the HNT support with a 0.964% metal loading using the HNT supports modified with 3-aminopropyl-trimethoxysilane (APTMS) coupling agent to facilitate the anchoring sites to trap the AuNPs and to prevent their agglomeration/aggregation. The AuNPs-HNT catalyst is investigated for structural and morphological characterization to get insights about the formation of the catalyst for the effective catalytic reduction of dyes and 4NM. The microscopic studies demonstrate that AuNPs (2.75 nm) are decorated on the outer surface of HNT. The as-prepared AuNPs-HNT catalyst demonstrates AZB and TBO dye degradation efficiency up to 96% in 10 and 11 min, respectively, and catalytic reduction of 4NM to 4-morpholinoaniline (MAN) is achieved up to 97% in 11 min, in the presence of NaBH4 without the formation of any by-products. The pseudo-first-order rate constant (K1) value of the AuNPs-HNT catalyst for AZB, TBO, and 4NM were calculated to be 0.0078, 0.0055, and 0.0066 s-1, respectively. Moreover, the synthesized catalyst shows an excellent reusability with stable catalytic reduction for 7 successive cycles for both the dyes and 4NM. A plausible mechanism for the catalytic dye degradation and reduction of 4NM by AuNPs-HNT catalyst is proposed as well. The obtained results clearly indicate the potential of AuNPs-HNT as an efficient catalyst for the removal of dye contaminants from the aquatic environments and cleaner reduction of 4NM to MAN, insinuating future pharmaceutical applications.

Pd-Coordinated Salinidol-Modified Mixed MOF: An Excellent Active Center for Efficient Nitroarenes Reduction and Selective Oxidation of Alcohols

Selective oxidation of active and inactive alcohol substrates and reduction of nitroarenes is a highly versatile conversion that remains a challenge in controlling functionality and adjustments in metal-organic frameworks (MOFs). On the other hand, it offers an attractive opportunity to expand their applications in designing the next generation of catalysts with improved performance. Herein, a novel mixed MOF consisting of supported 2-hydroxybenzamide (mixed MOF-salinidol) has been fabricated by post-synthetic modifications of mixed MOF. Subsequently, the prepared nanocomposites were modified to impart catalytic sites using palladium chloride ions mixed with MOF-salinidol/Pd (II). After successfully designing and structurally characterizing nanocomposites, we evaluated their activity in oxidizing primary and secondary alcohols using aerobic conditions with molecular oxygen and an air atmosphere. In addition, the stability of (mixed MOF-salinidol/Pd (II)) catalysts under catalytic conditions was also demonstrated by comparing the Fourier-transform infrared spectrum, scanning electron microscopy image, and ICP-OES method before and after catalysis. Based on the results, the active surface area of the synthesized nanocatalyst is large, which highlights its unique synergistic effect between post-synthetic modified MOF and Pd, and furthermore, the availability of catalytic sites from Pd, as demonstrated by outstanding catalytic activity.